双金属功能化的MOF-74合成及气体吸附性能

采用一步合成法制备了在无机构造单元金属节点上同时具有比例可调的Mn(Ⅱ)和Co(Ⅱ)的双金属MOF-74网络结构。经双金属功能化的单晶材料保持了与单金属MOF-74一致的结构及孔道,且两种金属大致均匀分布于晶格中。相对于Mn(Ⅱ),Co(Ⅱ)在合成MOF-74的过程中具有更快的配位及结晶速率,使得其在晶体中的比例高于反应溶液。双金属在同一框架结构内的配位促进了更多晶体内部局部缺陷的产生,使得Mn_(0.78)Co_(1.22)-MOF-74的比表面积相对于单金属的MOF-74材料有10%左右的提升。     

双金属MOF-74-CoMn催化剂的制备及其CO选择性催化还原技术应用

采用水热法成功地合成了不同比例的双金属MOF-74-CoMn催化剂,并成功用于以CO为还原剂的选择性催化还原脱硝（CO-SCR）反应.实验结果表明,双金属MOF-74-CoMn催化剂的NO_x转化率普遍高于单金属MOF-74-Co催化剂,且反应温度窗口更宽,其中,MOF-74-Co1Mn2的NO_x转化率最高,在175~275 ℃的温度范围内接近100%.进而,通过X射线粉末衍射（XRD）,热重分析（TGA）,扫描电镜（SEM）,N₂吸附/脱附,X-射线光电子光谱（XPS）,氢气程序升温还原性能测试（H₂-TPR）和原位红外光谱（FTIR）技术对双金属MOF-74-CoMn催化剂进行了表征和分析,发现金属Co、Mn的协同作用可以促进不饱和金属位点和氧空位的形成,从而提高CO选择性催化还原反应（CO-SCR）的效率.     

MOF-1和Tb@MOF-1荧光探针的设计、合成及对痕量Cr2O72-、S2O82-离子的识别

采用5-（（4-吡啶基）甲氧基）-异烟酸（H₂PLIA）、1,3,5-三（1-咪唑基）-苯（TIB）合成了金属有机骨架[Cd （PLIA）（TIB）]_n （MOF-1）。MOF-1是具有理想一维孔道的二维结构化合物,其一维孔道由柔性三角形PLIA^2-配体和刚性三角形TIB配体间隔形成。利用MOF-1易掺杂的优势,采用后修饰合成策略制备了Tb@MOF-1。对MOF-1和Tb@MOF-1进行了基本表征及荧光探针性能研究。2种探针材料具有相同的结构。MOF-1和Tb@MOF-1分别对水溶液中的Cr₂O₇^2-和S₂O₈^2-离子具有较强荧光识别能力,均有响应时间快,稳定性、选择性、灵敏度高的特点。研究了MOF-1和Tb@MOF-1对Cr₂O₇^2-和S₂O₈^2-的荧光识别机理,其不同可能与Tb³⁺离子掺杂有关。     

2-乙酰吡嗪苯甲酰腙钴、锌和铜配合物的晶体结构及荧光性质

合成了配合物[Co（L）₂]（1）,[Zn（L）₂]（2）和[Cu₂（L）₂Cl₂]（3）（HL为2-乙酰吡嗪苯甲酰腙）,并通过单晶衍射、元素分析及红外光谱表征了它们的结构。单晶衍射结果表明,配合物1和2同构,配体和金属的比例为2：1。每个配合物中,中心金属离子与来自2个阴离子配体L-的N₂O电子供体配位,形成扭曲的八面体配位构型。在双核配合物3中,Cu（Ⅱ）离子与1个阴离子三齿酰腙配体、2个μ₂桥联的氯离子配位,拥有扭曲的四方锥配位构型。此外还研究了配合物的荧光性质。     

基于3,5-二(3-吡啶)-4-氨基-1,2,4-三唑配体的Co(Ⅱ)和Cu(Ⅱ)配合物的合成与晶体结构

利用3,5-二（3-吡啶）-4-氨基-1,2,4-三唑（L）配体与Co（Ⅱ）/Cu（Ⅱ）盐室温下反应得到了一维的配位聚合物{[CoL（H₂O）₄]SO₄·H₂O}_n（1）和单核配合物[Cu（hfac）₂L₂]（2,hfac=hexafluoroacetylacetonate）。通过红外、元素分析及X射线单晶衍射等检测手段对所合成的配合物进行了表征。结构研究表明,配合物1中,配体L呈顺式构型,采取双齿配位方式桥联Co（Ⅱ）离子形成一维正弦链状结构,一维链通过多种氢键相互作用连接进一步形成三维网状结构;溶剂水分子和硫酸根阴离子通过氢键连接在框架上。配合物2中,配体L则采取单齿配位方式,与Cu（Ⅱ）离子形成离散型的单核结构,通过多重氢键作用进而连接成三维网状结构。     

异金属膦酸铀的合成、晶体结构和荧光性质

构建异金属膦酸铀仍然具有挑战性。在本工作中,从苯磺酰甲基膦酸二乙酯(Et₂L)出发,成功合成了一系列同构的异金属膦酸铀化合物[UO₂Mn (L)₂(H₂O)₄],其中M=Mn (1)、Co (2)、Ni (3)、Zn (4)、Cd (5)。晶体结构研究表明,磺酰基团没有与金属离子配位,而膦酸基团完全去质子化,连接2个铀酰离子和1个过渡金属离子,形成了二维层状晶体结构。荧光研究表明,在Mn (Ⅱ)、Co (Ⅱ)和Ni (Ⅱ)离子存在时,铀酰离子的特征荧光发射被淬灭,而在Zn (Ⅱ)和Cd ((Ⅱ)离子存在时,显示出强的特征荧光发射。     

基于3,5-二(3-吡啶)-4-氨基-1,2,4-三唑配体的Co(Ⅱ)和Cu(Ⅱ)配合物的合成与晶体结构

利用3,5-二（3-吡啶）-4-氨基-1,2,4-三唑（L）配体与Co（Ⅱ）/Cu（Ⅱ）盐室温下反应得到了一维的配位聚合物{[CoL（H₂O）₄]SO₄·H₂O}_n（1）和单核配合物[Cu（hfac）₂L₂]（2,hfac=hexafluoroacetylacetonate）。通过红外、元素分析及X射线单晶衍射等检测手段对所合成的配合物进行了表征。结构研究表明,配合物1中,配体L呈顺式构型,采取双齿配位方式桥联Co（Ⅱ）离子形成一维正弦链状结构,一维链通过多种氢键相互作用连接进一步形成三维网状结构;溶剂水分子和硫酸根阴离子通过氢键连接在框架上。配合物2中,配体L则采取单齿配位方式,与Cu（Ⅱ）离子形成离散型的单核结构,通过多重氢键作用进而连接成三维网状结构。     

一种不对称Salamo-型螯合配体及其钴（Ⅱ）配合物：合成、表征与晶体结构

合成了一种不对称Salamo-型螯合配体4-氯-6’-甲氧基-2,2’-[乙二氧双（氮次甲基）]二酚（H₂L）及其钴（Ⅱ）配合物[Co（L）（H₂O）],并通过元素分析、红外光谱、紫外-可见吸收光谱及X-射线单晶衍射方法对配体H₂L及其配合物进行了表征。结果表明：配体属单斜晶系,P2₁/n空间群,配合物属正交晶系,Iba2空间群。配合物为单核结构,由1个Co（Ⅱ）离子和1个四齿的L^2-配体单元和1个配位水分子组成,中心Co（Ⅱ）原子的配位数是5,且具有稍微扭曲的三角双锥几何结构,而配合物分子通过分子间C8-H8…Cl1氢键组装成1D链状的超分子结构。     

以5-氨基烟酸为配体的锌配位聚合物的合成、晶体结构及光学性质

以5-氨基烟酸（5-anaH）为配体,采用水热法合成了1个锌（Ⅱ）的二维配位聚合物[Zn（5-ana）₂]_n（1）。通过元素分析、红外光谱、热重（TGA）和X-射线粉末衍射（PXRD）等手段对其进行了表征,并用X-射线单晶衍射法测定了配位聚合物的单晶结构。该配位聚合物属于正交晶系,P2₁2₁2₁空间群,为2D层状结构。我们在室温下对其二次谐波产生效率及荧光性质进行了研究,结果表明,该配位聚合物具有二级非线性光学效应,可作为潜在的二阶非线性光学材料,配位聚合物荧光相对于配体5-氨基烟酸发生了蓝移。     

Al、Co和Mn掺杂对LiNiO2结构的影响

本文采用XRD和EXAFS研究Al、Co和Mn原子掺杂对LiNiO₂材料结构的影响。XRD结果表明掺杂材料具有与LiNiO₂相同的晶体结构，都属于R3m点群，但是晶胞略微缩小，LiNiO₂的层状结构得到改善,阳离子有序度增强。从EXAFS数据拟合结果可以看出，引入掺杂原子Al、Co和Mn减弱了Jahn-Teller畸变，使得NiO₆八面对称性提高。掺杂Al和Co使得第一壳层Ni-O配位键长减小，掺杂Mn原子影响不明显。Al、Co和Mn掺杂使第二壳层Ni-Ni配位键长减小，Co和Mn掺杂使得第二壳层局域有序度提高，而Al的引入使得第二壳层局域有序度降低。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.