含三氟乙酰苯基喹啉配体的铱配合物的合成及其电致发光性能

通过2-(4'-三氟乙酰苯基)-4-苯基喹啉(tfapqH)与三氯化铱反应生成了二氯桥中间体,然后用吡啶-2-甲酸(picH)解离得到双环金属铱配合物Ir(tfapq)₂pic。Ir(tfapq)₂pic在二氯甲烷中的发光波长为584 nm,量子产率约为0.846,磷光寿命为1.211 μs,比没有三氟乙酰修饰的铱配合物波长蓝移的10 nm,量子效率提高了约5%,磷光寿命降低了0.286 μs,辐射跃迁加快,半波宽度降低了约26%,色纯度提高。其HOMO能级为-5.405 eV,LUMO能级为-3.277 eV,能级相对于未修饰的配合物都有所降低,且HOMO降低更明显,总的效果是能级差增加。Ir(tfapq)₂pic 10%的热失重温度为301 ℃,比未修饰铱配合高近50 ℃。当Ir(tfapq)₂pic以2%质量浓度掺杂于PVK-PBD中做成电致发光器件时的效率最高,电致发光波长为594 nm。器件的启明电压为7.3 V,最大亮度为8 571 cd·m^-2,最大外量子效率为12.65%,对应的流明效率为22.14 cd·A^-1。色坐标是(0.58,0.40)。     

以1-苯基吡唑为主配体的红光Ir(III)配合物的合成及光电特性

合成了一种新型红色磷光配合物二(1-苯基咪唑) (1-苯基异喹啉)合铱((ppz)₂Ir(piq)), 通过核磁共振氢谱(¹H NMR)对其结构进行了表征, 通过紫外-可见(UV-Vis)吸收光谱、荧光光谱、低温磷光光谱、循环伏安法及含时密度泛函理论(TD-DFT)对其光物理性能及能级结构进行了研究. 制备了一系列基于(ppz)₂Ir(piq)的电致发光器件, 研究了(ppz)₂Ir(piq)的电致发光性质. 结果表明, (ppz)₂Ir(piq)的UV-Vis 吸收峰主要位于296、342、395 和460 nm, 固态粉末的室温磷光发射峰位于618 nm, 在2-甲基四氢呋喃(2-MeTHF)溶液中其低温磷光发射峰位于598 nm, 其三线态能级(E_T)为2.07 eV. (ppz)₂Ir(piq)的最高占据轨道(HOMO), 其主要定域于配体ppz 和金属Ir(III)上, 最低未占据轨道(LUMO)主要定域于配体piq 上. (ppz)₂Ir(piq)的HOMO和LUMO 能级分别为-5.92和-3.62 eV. 基于(ppz)₂Ir(piq)电致发光器件的优化掺杂浓度为8%-12% (w), 最大电致发光谱峰位于616 nm,最大电流效率约10 cd·A^-1, 最大功率效率为4.44 lm·W^-1, 色坐标保持在(0.65, 0.35)附近, 是一种潜在的饱和红光磷光材料.     

辅助配体对噌啉类铱配合物光电性能的影响

合成了2种新的噌啉类铱配合物（dpci）₂Ir（paz）和（dpci）₂Ir（taz）（dpci=3,4-二苯基噌啉,pazH=5-（2''-吡啶基）-3-三氟甲基-吡唑,tazH=5-（2''-吡啶基）-3-三氟甲基-1,2,4-三唑）,通过核磁共振氢谱和氟谱及高分辨质谱对其结构进行了确定,同时对其光电性能进行了表征。结果表明在聚甲基丙烯酸甲酯（1%,w/w）中（dpci）₂Ir（paz）和（dpci）₂Ir（taz）的发光波长分别为616和612 nm,相对参比铱配合物（dpci）₂Ir（pic）的波长（625 nm）有了较大蓝移,发光量子效率也由16.1%提高到了51.9%和32.5%。改进辅助配体后,材料的稳定性明显提高,使其能用蒸镀法制备有机电致发光器件。基于（dpci）₂Ir（paz）的器件发光为纯红光,CIE色坐标为（0.66,0.34）,最大亮度为2 054 cd·m^-2,最大电流效率为8.5 cd·A^-1。基于（dpci）₂Ir（taz）的器件最大亮度为2 931 cd·m^-2,最大电流效率为14.5 cd·A^-1。     

新型铱配合物的合成及电致发光性质研究

合成了一种新型橙红色磷光材料铱的配合物(npp)₂Ir(acac)(npp=2-(1-萘基)-4-苯基吡啶，acac=乙酰丙酮)，通过 ¹H NMR、MS、元素分析对其结构进行了表征。以铱配合物(npp)₂Ir(acac)作为发光体，制备了结构为ITO/Ir(5%)：PVK(60 nm)/F-TBB(15 nm)/Alq₃(15 nm)/LiF(1 nm)/Al(150 nm)的电致发光器件，研究了其电致发光性质。结果表明器件的最大发射波长在599 nm，最大发光亮度为3 841 cd·m^-2，最大电流效率达3.9 cd·A^-1。     

含氟绿光铱配合物的设计、合成及其高效磷光电致发光器件

以2-(3-(2',4'-二氟苯基)苯基)吡啶(Hdfbppy)为环金属C^N配体,乙酰丙酮(Hacac)为辅助配体,设计合成了一种绿色磷光铱配合物(Ir(dfbppy)₂(acac));研究了此配合物的光物理性质及其电致发光器件性能。室温下,配合物Ir(dfbppy)₂(acac)的二氯甲烷溶液的最大发射波长为520nm,量子效率为71%,寿命为381ns。将此配合物掺杂在4,4'-N,N'-二咔唑基二联苯(CBP)中,作为发光层制备了有机发光二极管器件。结果显示,该器件在7.2V电压下呈现的最大亮度为68324cd·m^-2,最大电流效率约为53cd·A^-1,最大功率效率为37lm·W^-1,色坐标为(0.33,0.62)。     

一种新型红色三线态喹喔啉铱(Ⅲ)配合物的合成及发光性质

利用2,3-二苯基喹喔啉和水合三氯化铱(IrCl₃?H₂O)反应, 合成了一种新型喹喔啉铱的配合物[Ir(DPQ)₂(acac)], 通过元素分析, ¹H NMR和HRMS对配合物结构进行了表征, 结果显示得到的是目标化合物. 利用紫外光谱和荧光光谱对配合物的吸收光谱和光致发光光谱进行了研究. 利用该材料作为磷光材料制备了结构为[ITO/NPB(30 nm)/NPB∶7% Ir(DPQ)₂(acac)(25 nm)/PBD (10 nm)/Alq₃ (30 nm)/Mg∶Ag (10∶1)(120 nm)/Ag(10 nm)] 的电致发光器件, 研究了其电致发光光谱. 结果表明, 配合物[Ir(DPQ)₂(acac)]在476和625 nm处存在单重态¹MLCT(金属到配体的电荷跃迁)和三重态³MLCT的吸收峰; 发光光谱结果显示, 在660 nm处有较强的金属配合物三重态的磷光发射; 电致发光光谱显示, 该器件的启动电压是4.25 V, 器件的最大亮度为4910 cd/m², 外量子效率为5.14%, 器件的流明效率为1.12 lm/W, 是一种新型红色磷光材料.     

苯基噌啉铱配合物的合成及电致发光性质

合成了一种新型环金属铱(Ⅲ)配合物(dpci)2Ir(pic),通过核磁共振氢谱和飞行时间质谱对配合物的结构进行了确定,同时对其光物理性能和电化学性能进行了表征。结果表明(dpci)2Ir(pic)在二氯甲烷中的发光波长为657 nm,量子产率约为0.005,磷光寿命为226 ns。其HOMO能级为-5.16 eV,LUMO能级为-3.16 eV。将铱配合物以0.5~4.0%质量浓度掺杂于聚乙烯基咔唑(PVK)-2-(4-叔丁基苯)-5-(4-联苯基)-1,3,4-噁二唑(PBD)中,通过旋涂成膜做成电致发光器件。掺杂2.0%的器件表现出最好的性能,电致发光波长为658 nm。器件的启明电压为11.5 V,最大外量子效率为9.1%,最大亮度为2 484 cdm-2,对应的流明效率为5.31cd.A-1。色坐标是(0.66,0.31)接近标准红色的色坐标。     

室温磷光材料二(2-苯基吡啶)(2-(2-吡啶)苯并咪唑)合铱(III)的合成及光电特性

以2-苯基吡啶(ppy)为主配体, 2-(2-吡啶)苯并咪唑(pybiH)为辅助配体合成了一种室温蓝绿色磷光发射材料二(2-苯基吡啶)( 2-(2-吡啶)苯并咪唑)合铱(III) ((ppy)₂Ir(pybi)), 通过傅里叶变换红外(FTIR)光谱、核磁共振氢谱(1H NMR)、质谱(MS)、元素分析对其结构进行了表征. 利用紫外-可见吸收光谱、荧光激发和发射光谱、循环伏安曲线, 结合含时密度泛函理论(TD-DFT)模拟计算研究了(ppy)₂Ir(pybi)的光物理特性及能级结构, 并研究了其电致发光性能. (ppy)₂Ir(pybi)的紫外吸收峰分别位于250, 295, 346和442 nm, 与理论模拟计算吻合得很好;(ppy)₂Ir(pybi)为蓝绿光发射, 发光峰分别位于495 和518 nm; (ppy)₂Ir(pybi) 的最高占据轨道(HOMO)和最低空轨道(LUMO)能级分别为-6.11和-3.43 eV, 光学带隙为2.68 eV; 以(ppy)₂Ir(pybi)为掺杂剂, 4,4'-N,N'-二咔唑基联苯(CBP)为主体材料, 制备电致磷光器件, 电致发射峰位于508 nm, 最大亮度为8451 cd·m^-2, 最大电流效率为17.6 cd·A^-1. 这些研究为(ppy)₂Ir(pybi)在有机电致发光领域的应用提供实验依据.     

一种可旋涂的磷光铱（Ⅲ）配合物的合成及其在OLED器件中的性能

以1-（6-（9-咔唑基）己基）-2-苯基咪唑（Czhpi）为主配体,2-（5-（4-氟苯基）-1,3,4-三唑）吡啶（fpptz）为辅助配体,合成了一种溶解性好的可用于湿法旋涂制备有机电致发光器件的磷光铱（Ⅲ）配合物（Czhpi）₂Ir（fpptz）。通过紫外-可见吸收光谱、发射光谱、低温磷光光谱及热重分析对其光物理性质和热稳定性进行了研究。将配合物（Czhpi）₂Ir（fpptz）掺杂在1,3-二唑-9-基苯（mCP）中,作为发光层,经湿法旋涂制备了有机发光二极管器件。结果显示,该器件的最大电致发光谱峰位于523 nm,最大电流效率约5.74 cd·A^-1,最大功率效率为2.88 lm·W^-1,色坐标显示在（0.31,0.41）附近。     

高效磷光铱配合物的合成及电致发光性能研究

合成了一种含苯并噻唑结构配体的环金属化铱配合物(ffbi)₂Ir(acac)，(其中ffbi为1-(4-氟苄基)-2-(4-氟苯基)苯并咪唑，acac为乙酰丙酮)，并以其作为发光体, 制备了有机电致发光器件。结果表明该配合物具有强磷光发光特性，器件发绿色光。其中结构为TCTA(40 nm)/CBP∶Ir(6.3%，30 nm)/BCP(10 nm)/Alq(40 nm)的电致发光器件在12 V电压下最大发光亮度达41 499 cd·m^-2，在8 V电压下，最大外量子效率达5.7%。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.