K改性β-Mo2C催化剂CO加氢合成低碳混合醇的研究

制备系列K改性的β-Mo2C催化剂并对其CO加氢合成低碳混合醇性能进行了考察。结果表明，K改性使β-Mo2C催化剂的CO加氢选择性发生显著变化。β-Mo2C催化剂CO加氢的产物主要为C1～C4烷烃,经K改性后β-Mo2C催化剂上产物主要为C1～C5低碳醇，其中高级醇(C2+OH)选择性可达到33.78%。通过对碱金属质量分数的考察发现，当K/Mo（原子比）为0.2时，总醇选择性达到最大值，低碳醇的时空收率达到0.12 g/（mL·h－１）。β-Mo2C催化剂上醇烃产物均符合线性Anderson-Schultz-Flory（A-S-F）分布曲线，而K改性β-Mo2C催化剂上醇产物为独特的甲醇负偏离A-S-F分布。可见，K助剂的加入有效促进了低碳醇的形成，尤其是促进了C1OH到C2OH的链增长步骤。     

Rh基催化剂上CO加氢制C2含氧化合物的红外光谱研究

 用红外光谱法考察了Rh-Mn-Li-Ti/SiO2催化剂在CO加氢反应过程中表面吸附物种随压力、温度和H2/CO比的改变而变化的规律. 结果表明,高压有利于提高催化剂表面吸附的CO浓度和活性,高温有利于CO解离; 而高温、高压条件不但促进了CO吸附,而且提高并平衡了CO的解离和插入之间的相对活性,促进了C2含氧化合物的生成. H2/CO比的增大有利于CO在催化剂表面的吸附,从而促进了CO插入,尤其是CO的解离和加氢活性,但是过高的H2/CO比将导致过高的CO解离和加氢活性,引起CO插入活性的削弱而最终导致C2含氧化合物生成活性的下降. 同时,考察了助剂(Mn, Li和Ti)对Rh基催化剂表面吸附物种的影响. 结果表明,助剂的加入可提高C2含氧化合物的生成活性.     

Rh-Mn-Li/SiO2催化剂的吸附量热和红外研究

通过在最优Rh含量基础上对金属配比的再优化,成功地改进了Rh-Mn-Li/SiO2催化剂的CO加氢性能;并采用微量吸附量热和红外等表征手段,考察了助剂Mn和Li促进作用的本质.结果表明:助剂Mn和Li的添加,使孪式和线式吸附CO的碳氧键强度增加,并同时削弱了桥式吸附CO的碳氧键或者使其转化为更易于解离的倾斜式CO吸附物种,从而同时增加了Rh基催化剂的CO解离和插入能力,提高了其活性和C2含氧化合物选择性.另一方面,Mn和Li的添加显著地降低了Rh基催化剂表面H的数量和稳定性.催化剂加氢能力显著降低极大地抑制了CH4的生成,从而有利于C2含氧化合物选择性的进一步提高.     

CO2催化加氢甲烷化负载型铁催化剂性能的研究

二氧化碳;CO2催化加氢甲烷化负载型铁催化剂性能的研究     

CO2加氢合成甲醇催化反应中CO的作用

研究了铜基催化剂上CO₂加氢合成甲醇反应中掺人CO的作用,结果表明,在原料中添加少量CO,甲醇的选择性提高38%,收率提高25%;TPD-MS和TPSR-MS结果表明,CO能抑制催化剂表面起逆水汽变换作用的活性位对CO₂的吸附,从而提高了CO₂加氢合成甲醇的选抒性.     

Fe-Zn-M/HZSM-5复合催化剂上CO_2加氢性能的研究

研究了 380℃、 5 .0 MPa条件下 ,在 Fe- Zn- M/ HZSM- 5 (M=Cr、 Al)复合催化剂上进行的 CO2 催化加氢的反应 .考察了 Fe- Zn- M中 Fe含量、分子筛的硅铝比及 Fe- Zn- M/ HZSM- 5的比率对 CO2 转化率和产物选择性的影响 .结果表明 ,随着 Fe含量的增加 ,复合催化剂的活性增强、目的产物选择性降低 ;Fe- Zn- M与 HZSM- 5间有适宜的配比 ;分子筛的硅铝比影响到复合催化剂的活性和选择性 ,随着分子筛硅铝比的降低 ,复合催化剂的活性增强 ,目的产物选择性提高     

复合催化剂上CO_2加氢合成C_2~ 烃类

介绍了由 CO2 H2 合成 C2 烃的几种复合催化剂体系的研究进展 ,比较和评价了复合催化剂体系的活性和选择性及其对 C2 烃类生成的影响。着重于复合催化剂体系对 C4 烃的生成及产物分布的影响并简述反应机理     

单分散SiO2的焙烧温度对Rh基催化剂上CO加氢反应性能的影响

在比较了分别以商业SiO2和采用Sto?ber法制备的单分散SiO2为载体的Rh-Mn-Li/SiO2催化剂催化CO加氢反应性能的基础上,进一步调变了Stober法制备SiO2时的焙烧温度,并考察了其对Rh-Mn-Li/SiO2催化CO加氢性能的影响.利用N2吸附-脱附、傅里叶变换红外(FTIR)光谱、H2程序升温还原(H2-TPR)、程序升温表面反应(TPSR)等方法对载体及催化剂的物理化学性能进行了表征.结果表明:不同温度焙烧的载体表面具有不同的Si―OH数量,从而影响金属的分散状态及Rh和Mn之间的相互作用.载体表面较多的羟基有利于Rh的分散和CO的吸附,从而增强催化剂的反应活性.载体表面适当数量的羟基能够得到适中的Rh与Mn之间的相互作用,使催化剂具有合适的CO解离能力,有利于CHx的CO插入反应,从而提高了C2含氧化合物的选择性.     

Rh-Mn-Li/SiO2催化剂上CO加氢制C2含氧化合物:载体硅烷化程度的影响

以三甲基氯硅烷为硅烷化试剂,对硅胶进行不同程度硅烷化预处理,采用浸渍法制备了其负载的Rh-Mn-Li催化剂,用于CO加氢制C₂含氧化合物的反应,并运用红外光谱、N₂吸附-脱附法、C含量测定、透射电镜、H₂程序升温还原和程序升温表面反应等手段对载体和催化剂进行了表征。结果表明,制得的不同硅烷化程度硅胶织构性质变化不大,它们负载的催化剂上Rh平均粒径均在3nm左右,硅烷化对催化剂吸附CO的形态和Rh的还原性能的影响均很小,但随着载体硅烷化程度的提高,催化剂上Rh解离CO的能力增加,因而其活性逐渐增加,且不影响C₂含氧化合物的选择性。     

表面金属有机化学Ⅱ—SiO_2担载的三钌乙烯酮原子簇化合物[PPN]_2[Ru_3(CO)_9(CCO)]在CO加氢反应中的催化行为

本文分别通过三种不同的钌原子簇化合物[HRu_3(CO)_(11)]~-、Ru_6C(CO)_(17)和[Ru_3(CO)_9(CCO)~(2-)]制备了三种SiO_2担载型的钌催化剂,并研究了它们在CO加氢反应中的催化行为.结果表明,若和用[HRu_3(CO)_(11)]~-制备的催化剂相比较,用[Ru_3(CO)_9(CCO)]~(2-)制备的催化剂在CO加氢反应中显示了较高的活性.通过比较以上三种催化剂的催化行为以及所进行的红外和质谱表征,初步提出了用[Ru_3(CO)_9(CCO)]~(2-) 制备的催化剂上,CCO基团经脱羰基后可能转化成表面碳化物(Carbide),它是形成烃类产物的中间体.     

Syntheses of 2-hydroperoxy-and 2-hydroxy-2H-imidazoles

Oxidation of fully substituted imidazoles 1 by singlet oxygen gives in good yield fully substituted 2-hydroperoxy-2H-imidazoles 2 . Reduction of 2 by triphenylphosphine leads to 2-hydroxy-2H-irnidazoles 3 . Limitations of the methods are reported.     

Photocycloaddition of 2-Cyanocycloalk-2-Enones to 2, 3-Dimethylbut-2-Ene

Irradiation of 5,5-dimethyl-6-oxocyclohex- l-ene- l-carbonitrile ( 1 ) in the presence of 2,3-dimethylbut-2-ene afforded 3,3,4,4,7,7-hexamethyl-3,4,4a,5,6,7-hexahydroindeno[1,7-c,d]-],2-oxazole (3) in nearly quantitative yield. In contrast, 4,4-dimethyl-5-oxo-cyclopent-l-ene-l-carbonitrile ( 2 ) under the same conditions reacted not to a tricyclic isoxazole but to a 2:1 mixture of 3,3,6,6,7,7-hexamethyl-2-oxo-bicyclo[3.2.0]heptane-l-carbonitrile ( 4 ) and trans-3,3-dimethyl-2-oxo-5-(2,3-dimethylbut-3-en-2-yl)cyclopentane-l-carbonitrile ( 5 ), respectively.     

Thermal decomposition of Me3SnO2PCl2, Me2Sn(O2PCl2)2 and Ph3SnO2PCl2

TG and DTA studies on Me₃SnO₂PCl₂, Me₂Sn(O₂PCl₂)₂ and Ph₃SnO₂PCl₂ were carried out under dynamic argon atmosphere. The results show that the decomposition proceeds in different stages leading to the formation of Sn₃(PO₄)₂ as a stable product. This compound was characterized by IR spectroscopy. Decomposition schemes involving reductive elimination reactions were proposed.     

Crystal Structures of [Bu2Sn(O2PPh2)2], [Ph2Sn(O2PPh2)2], and [PhClSn(O2PPh2)OMe]2. Raman Spectra of [Ph2Sn(O2PPh2)2] and [PhClSn(O2PPh2)OMe]2

[(n‐Bu)₂Sn(O₂PPh₂)₂] ( 1 ), and [Ph₂Sn(O₂PPh₂)₂] ( 2 ) have been synthesized by the reactions of R₂SnCl₂ (R=n‐Bu, Ph) with HO₂PPh₂ in Methanol. From the reaction of Ph₂SnCl₂ with diphenylphosphinic acid a third product [PhClSn(O₂PPh₂)OMe]₂ ( 3 ) could be isolated. X‐ray diffraction studies show 1 to crystallize in the monoclinic space group P2₁/c with a = 1303.7(1) pm, b = 2286.9(2) pm, c = 1063.1(1) pm, β = 94.383(6)°, and Z = 4. 2 crystallizes triclinic in the space group , the cell parameters being a = 1293.2(2) pm, b = 1478.5(4) pm, c = 1507.2(3) pm, α = 98.86(3)°, β = 109.63(2)°, γ = 114.88(2)°, and Z = 2. Both compounds form arrays of eight‐membered rings (SnOPO)₂ linked at the tin atoms to form chains of infinite length. The dimer 3 consists of a like ring, in which the tin atoms are bridged by methoxo groups. It crystallizes triclinic in space group with a = 946.4(1) pm, b = 963.7(1) pm, c = 1174.2(1) pm, α = 82.495(6)°, β = 66.451(6)°, γ = 74.922(6)°, and Z = 1 for the dimer. The Raman spectra of 2 and 3 are given and discussed.     

Electrochemical study of (NEt4)2Cl2FeS2MoS2 and (NEt4)2Cl2FeS2MoS2FeCl2

Summary The ability of [MoS₄]^2–, anions to be used as ligands for transition metal ions has been widely demonstrated, especially with Fe²⁺. The present study has been restricted to linear complexes such as (NEt₄)₂ [Cl₂FeS₂MoS₂] and (NEt₄)₂[Cl₂FeS₂MoS₂FeCl₂]. Their electrochemical properties are described: upon electrochemical reduction, these compounds yield MoS₂, as a black precipitate, and an iron complex in solution, assumed to be [SFeCl₂]^2–. The electrochemical reduction goes through two electron transfers, coupled with the breakdown of the molecular skeleton: a DISPl and an ECE mechanism. Depending on the solvent, the following equilibrium may be observed: [Cl₄Fe₂MoS₄]^2–[Cl₂FeMoS₄]^2–+FeCl₂. The equilibrium constant, K_D, was evaluated by differential pulse polarography. K_D is tightly related to the donor number of the solvent.     

Homopolymerization of 2-alkyl- and 2-aryl-2-oxazolines

2-Aryl- and 2-alkyl-2-oxazolines have been polymerized to poly-(N-aroyl)aziridines and poly(N-acyl)aziridines, respectively, in the presence of boron trifluoride. The polymers obtained were glassy, light yellow resins with molecular weights ranging from 3500 to 7500 (35–50 oxazoline units per chain). The polymerization rates have been determined for several of these monomers. A polymerization mechanism is proposed.