2-氨基吡啶镍配合物/MAO催化β-蒎烯与降冰片烯的共聚合反应

2-氨基吡啶镍配合物[(2-PyCH2NAr)NiBr,Ar=2,6-二甲基苯基(a),2,6-二异丙基苯基(b),2,6-二氟苯基(c)]在助催化剂甲基铝氧烷(MAO)作用下能高活性催化β-蒎烯与降冰片烯共聚合,得到分子量分布较宽(PDI≈3.7～5.5)的共聚产物.在相同条件下,配体含F取代的配合物c对共聚合的催化活性最高.对共聚产物用CHCl3和四氢呋喃(THF)萃取分级,得到2个分子量分布较窄(PDI≈2.0)且组成差异较大的级分,其中仅溶于CHCl3而不溶于THF的级分的分子量较高,具有高降冰片烯含量(xN90%);而另一个溶于THF的级分的分子量较低,具有较高的β-蒎烯含量.结果表明,共聚合体系中存在2种不同催化性质的活性中心.TGA分析显示,共聚物有2个热分解温度,随着降冰片烯含量的增加,低温处的失重量逐渐减少.     

大位阻α-二亚胺钯配合物催化降冰片烯与5-降冰片烯-2-乙酸酯的共聚研究

采用大位阻9,10-二氢-9,10-乙醇蒽~(-1)1,12-二亚胺钯配合物为主催化剂,三五氟苯基硼B(C6F5)3为助催化剂,在甲苯中对降冰片烯与极性降冰片烯衍生物5-降冰片烯-2-乙酸酯进行加成共聚合研究,呈现出高催化活性(1.1×10~4~1.6×10~6g_(polymer)/molPd·h)。当5-降冰片烯-2-乙酸酯加入摩尔比为10~50%时,其插入率为5.53~8.45%。聚合反应产率随着5-降冰片烯-2-乙酸酯加入摩尔比的增大而减小。共聚物的热分解温度T_d、玻璃化转变温度T_g和分子量Mw分别为332.4~432.5℃、259.9~306.6℃和2.3×104~8.6×104g·mol~(-1)。     

5-丁氧基亚甲基-2-降冰片烯的合成及其加成聚合反应

采用降冰片烯-5-甲醇和溴丁烷在氢化钠作用下合成了5-丁氧基亚甲基-2-降冰片烯,双-(β-酮萘胺)镍(Ⅱ)/B(C6F5)3催化体系使之聚合。 考察了聚合时间对其均聚合的影响以及5-丁氧基亚甲基-2-降冰片烯和降冰片烯不同摩尔投料比对其共聚行为的影响。 采用1H NMR、FTIR和TGA测试技术对所得的聚合物进行了结构表征和性能测试。 结果表明,双-(β-酮萘胺)镍(Ⅱ)/B(C6F5)3催化体系对5-丁氧基亚甲基-2-降冰片烯均聚和共聚具有较高的催化活性。 得到的均聚物和共聚物为加成型聚合物,料液中5-丁氧基亚甲基-2-降冰片烯的摩尔分数为10%~90%时,其在共聚物中的插入率为22.1%~76.9%,所得聚合物具有较好的热稳定性（Td＞360 ℃）,在THF和CHCl3等许多普通溶剂中有很好的溶解性能。     

双-(β-酮萘胺)镍(Ⅱ)/MAO催化剂体系催化苯乙烯聚合

 采用双-(β-酮萘胺)镍(Ⅱ)为主催化剂,以甲基铝氧烷(MAO)为助催化剂,在甲苯溶剂中进行了苯乙烯聚合实验,并考察了聚合温度、Al/Ni摩尔比、单体浓度和聚合时间等因素对聚合反应的影响. 结果表明,双-(β-酮萘胺)镍(Ⅱ)/MAO催化剂显示出很高的催化活性,可催化苯乙烯聚合得到中等分子量和分子量分布较窄(Mw/Mn＜1.6)的聚苯乙烯. 采用核磁共振氢谱、核磁共振碳谱、傅里叶变换红外光谱、差示扫描量热法和广角X射线衍射技术对聚合产物进行了表征. 结果表明,所得聚合物为无规聚苯乙烯.     

邻-酚羟基取代N-杂环卡宾[C,O]螯合双配体镍/MAO催化降冰片烯加成聚合的研究

3种邻-酚羟基取代的N-杂环卡宾[C,O]螯合双配体镍配合物在甲苯中以甲基铝氧烷(MAO)为助催化剂,催化降冰片烯(NBE)聚合.考察了反应温度、时间、n(Al)/n(Ni)以及n(NBE)/n(Ni)等因素对催化活性和所得聚降冰片烯相对分子质量及其分布的影响.结果表明,0℃时催化体系的聚合活性可达,1.34×107gPNBE/(molNi.h);所得聚降冰片烯(PNBE)重均相对分子质量(Mw)可达2.0×106,相对分子质量分布(Mw/Mn)为3.3~1.5,热分解温度在440℃附近,且在室温下可溶于环己烷和三氯苯.通过对聚合产物FTIR,13C-NMR和WAXD分析表明,该聚合反应以烯烃加成聚合方式进行,且聚合物是非晶态结构.     

含N-萘基中性镍催化剂的合成及催化降冰片烯聚合反应

本文合成了两个新的催化剂，苯基-三苯基膦-[N-萘基-3-甲基水杨醛亚胺]合镍(4a)与苯基-三苯基膦-[N-萘基-5-硝基水杨醛亚胺]合镍(4b)，并研究了它们催化降冰片烯的聚合。发现两种催化剂在助催化剂甲基铝氧烷(MAO)存在下都具有良好的催化降冰片烯聚合物活性。在50 ℃时，催化剂4b表现出最高催化活性。     

双吡唑亚胺镍/甲基铝氧烷催化降冰片烯的聚合

合成了两种双吡唑亚胺镍配合物: 双-N-(苯基-1-3,5-二甲基吡唑基亚甲基)苯基亚胺二溴化镍(Cat.1)和双-4-甲氧基-N-(苯基-1-3,5-二甲基吡唑基亚甲基)苯基亚胺二溴化镍(Cat.2). 研究了Cat.1/MAO和Cat.2/MAO催化体系对降冰片烯(NBE)单体聚合的催化性能, 考察了各种聚合条件, 如温度、Al/Ni摩尔比及催化剂浓度对降冰片烯的催化效率、单体转化率、聚合物分子量及分子量分布的影响. 研究结果表明, Cat.1/MAO和Cat.2/MAO催化体系对降冰片烯聚合具有较高的催化效率, 可达到105 g PNBE/(mol Ni)数量级, 所得聚降冰片烯(PNBE)的重均分子量在105以上, 分子量分布指数在2左右. 聚合产物的1H NMR和FTIR谱分析结果表明, 该聚合反应是以单体的乙烯基加成聚合机理进行的.     

四氯化钛/三异丁基铝体系催化降冰片烯与异戊二烯的共聚合

以传统Ziegler-Natta催化体系TiCl4/Al(#em/em#-Bu)3催化降冰片烯(NBE)和异戊二烯(IP)的共聚合, 制得可溶于常规有机溶剂的共聚物, 其数均分子量为2.0 × 104~6.5 × 104, 分子量分布指数为1.5~2.9, 降冰片烯结构摩尔含量为26%~60%. 考察了助催化剂用量、 聚合温度及2种单体投料比对共聚合的影响. 结果表明, 当降冰片烯与异戊二烯的投料摩尔比为4∶6时, 于40 ℃聚合6 h, 得到的共聚物产率为96%, 数均分子量为6.5×104, 降冰片烯结构含量45%. 用 1H NMR, 13CNMR, GPC和DSC等方法表征了共聚产物的微观结构与热性能. 13C NMR DEPT结果表明, 共聚反应中降冰片烯单体以加成方式聚合. DSC结果显示, 共聚物只有一个玻璃化转变温度(Tg=20~40 ℃). 通过Kelen-Tüdös方法得到2种单体的竞聚率分别为rNBE=0.07, rIP=0.44.     

含溴α-二亚胺镍(Ⅱ)配合物的合成、表征及催化乙烯聚合反应

合成了一种新型含溴α-二亚胺及其镍配合物,采用<'1>H NMR、<'13>C NMR、FTIR、元素分析和XPS等方法进行表征.用配合物作为催化剂,以甲基铝氧烷(MAO)为助催化剂催化乙烯聚合得到高支化度的聚乙烯,并研究了聚合条件(如AL/Ni摩尔比、聚合温度以及配体结构)对催化活性的影响,结果表明,在反应温度为25...     

碳桥限制构型催化剂催化乙烯1-己烯共聚和共聚物结构表征

为了碳桥限制构型催化剂(CpCN-CGC)的工业应用,为模试提供工艺参数,我们考察了用这种催化剂,以正庚烷为溶剂,甲基铝氧烷(MAO)为助催化剂的乙烯与1-己烯共聚,考察因素包括聚合温度、乙烯压力、铝锆比、氢气压力和1-己烯浓度.研究发现聚合温度从100升高到140℃,共聚活性先升高再降低,聚合物分子量持续降低;氢气分压从0.1增加到0.8 MPa,共聚活性仍呈先升高再降低,聚合物分子量持续降低的趋势;乙烯压力从0.4升高到1.8 MPa,共聚活性先升高再降低,但聚合物分子量逐步增大;Al/Zr从500升高到1 000,共聚活性逐步增大,但聚合物分子量趋向减小.优化工艺条件为:催化剂用量为10μmol,Al/Zr=700,聚合温度为110~120℃,乙烯压力为1.2~1.4 MPa,1-己烯加入量为20 mL,聚合时间为30 min.此时共聚活性最高达到106g/(mol-Zr·h),共聚物中1-己烯插入率达到了8.34%;用13C-NMR、GPC、DSC表征了聚合产物,计算了二单元组和三段组序列分布,并发现有交替共聚片段HEHE存在.最后还讨论了在聚合物中发现的多种支链的形成机理.     

Living copolymerization of ethylene with norbornene mediated by heteroligated (Salicylaldiminato)(β‐enaminoketonato)titanium catalysts

Three heteroligated (salicylaldiminato)(β‐enaminoketonato)titanium complexes [3‐Bu^t‐2‐OC₆H₃CH?N(C₆F₅)][(p‐XC₆H₄)N?C(Bu^t)CHC(CF₃)O]TiCl₂ ( 3a : X = F, 3b : X = Cl, 3c : X = Br) were synthesized and investigated as the catalysts for ethylene polymerization and ethylene/norbornene copolymerization. In the presence of modified methylaluminoxane as a cocatalyst, these unsymmetric catalysts exhibited high activities toward ethylene polymerization, similar to their parallel parent catalysts. Furthermore, they also displayed favorable ability to efficiently incorporate norbornene into the polymer chains and produce high molecular weight copolymers under the mild conditions, though the copolymerization of ethylene with norbornene leads to relatively lower activities. The sterically open structure of the β‐enaminoketonato ligand is responsible for the high norbornene incorporation. The norbornene concentration in the polymerization medium had a profound influence on the molecular weight distribution of the resulting copolymer. When the norbornene concentration in the feed is higher than 0.4 mol/L, the heteroligated catalysts mediated the living copolymerization of ethylene with norbornene to form narrow molecular weight distribution copolymers (M_w/M_n < 1.20), which suggested that chain termination or transfer reaction could be efficiently suppressed via the addition of norbornene into the reaction medium. Polymer yields, catalytic activity, molecular weight, and norbornene incorporation can be controlled within a wide range by the variation of the reaction parameters such as comonomer content in the feed, reaction time, and temperature. ©2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6072–6082, 2009     

Homo‐ and copolymerization of norbornene with styrene catalyzed by a series of copper(II) complexes in the presence of methylaluminoxane

Vinyl‐type polymerization of norbornene as well as random copolymerization of norbornene with styrene was studied using a series of copper complexes‐MAO. The precatalysts used here are copper complexes with β‐ketoamine ligands based on pyrazolone derivatives and the molecular structure of complex 4 was determined using X‐ray analysis. All of these catalyst systems are moderately active for the vinyl‐type polymerization of norbornene and random copolymerization of norbornene with styrene. The random copolymers obtained suggest that only one type of active species is present. Gel permeation chromatography (GPC) and NMR indicate that the copolymers are ‘true’ copolymers. The copolymerization reactivity ratios (r_NBE = 20.11 and r_Sty = 0.035) indicate a much higher reactivity of norbornene, which suggests a coordination polymerization mechanism. The solubility and processability of the copolymers are improved relative to polynorbornene and the thermostability of the copolymers is improved relative to polystyrene. Copyright © 2006 John Wiley & Sons, Ltd.     

High norbornene incorporation in ethylene-norbornene copolymerization with a bis(α-alkyloxoimine) titanium-MAO catalyst

A novel bis(α-alkyloxoimine) titanium(IV) complex was synthesized and used as a catalyst precursor to catalyze homo- and copolymerization of ethylene and norbornene. The titanium complex activated with methylalumoxane exhibits good activities for the homopolymerizations of ethylene and norbornene under high temperature to produce high-molecular-weight linear polyethylene and vinyl-type polynorbornene, respectively. Ethylene-norbornene copolymers with high molecular weight can also be produced by this catalyst. The incorporation of norbornene from 0 to 76 mol% in the copolymers can be controlled by varying the charged norbornene. ¹³C NMR analyses show that the microstructures of the ethylene-norbornene copolymers with low norbornene incorporation are predominantly alternated and isolated norbornene units, while those with high norbornene incorporation are random polymers containing long norbornene sequences.     

The influence of comonomer on ethylene/α-olefin copolymers prepared using [bis(N-(3-tert butylsalicylidene)anilinato)] titanium (IV) dichloride complex

We describe the synthesis of [bis(N-(3-tert-butylsalicylidene)anilinato)] titanium (IV) dichloride (Ti-FI complex) and examine the effects of comonomer (feed concentration and type) on its catalytic performance and properties of the resulting polymers. Ethylene/1-hexene and ethylene/1-octene copolymers were prepared through copolymerization using Ti-FI catalyst, activated by MAO cocatalyst at 323 K and 50 psi ethylene pressure at various initial comonomer concentrations. The obtained copolymers were characterized by DSC, GPC and 13C-NMR. The results indicate that Ti-FI complex performs as a high potential catalyst, as evidenced by high activity and high molecular weight and uniform molecular weight distribution of its products. Nevertheless, the bulky structure of FI catalyst seems to hinder the insertion of α-olefin comonomer, contributing to the pretty low comonomer incorporation into the polymer chain. The catalytic activity was enhanced with the comonomer feed concentration, but the molecular weight and melting temperature decreased. By comparison both sets of catalytic systems, namely ethylene/1-hexene and ethylene/1-octene copolymerization, the first one afforded better activity by reason of easier insertion of short chain comonomer. Although 1-hexene copolymers also exhibited higher molecular weight than 1-octene, no significant difference in both melting temperature and crystallinity can be noticed between these comonomers.     

茂金属化合物/Zn/BDGE/MAO催化体系合成aPS-b-P(S-co-E)-b-PE嵌段共聚物的研究

采用单茂钛化合物CpTiCl3,有机环氧化合物1,4-丁二醇二缩水甘油基醚(BDGE),金属锌(Zn)及甲基铝氧烷(MAO)为催化体系,通过自由基聚合和配位聚合机理合成无规聚苯乙烯-b-聚(苯乙烯-co-乙烯)-b-聚乙烯(aPS-b-P(S-co-E)-b-PE).探讨了温度、时间、乙烯压力及Al/Ti摩尔比对共聚合的影响.所得嵌段共聚物采用DSC,WAXD,GPC和13C-NMR等手段进行了表征.结果表明该共聚物是苯乙烯/乙烯嵌段共聚物,聚苯乙烯链段是无规的,聚乙烯链段具有结晶性.     

Synthesis of a norbornene monomer having cyclic carbonate moiety based on CO2 fixation and its transition metal‐catalyzed polymerizations

A norbornene monomer bearing cyclic carbonate moiety ( NB‐CC ) was successfully synthesized from the corresponding precursor having epoxy moiety by its reaction with carbon dioxide under atmospheric pressure, which was efficiently catalyzed by lithium bromide. NB‐CC underwent the ring‐opening metathesis polymerization (ROMP) catalyzed by a ruthenium carbene complex to give the corresponding poly(norbornene), of which side chain inherited the cyclic carbonate moiety from the monomer without any deterioration. The same ROMP system was applicable to the copolymerization of NB‐CC and 5‐butyl‐2‐norbornene ( BNB ), which afforded the corresponding copolymer with a composition ratio same as a feed ratio. In addition, by using a catalytic system consisted of palladium (II) acetate/tricyclohexylphosphine/triphenylcarbenium tetrakis(pentafluorophenyl)borate, the copolymerization of NB‐CC and BNC proceeded successfully in a vinyl addition polymerization mode to give the corresponding poly(norbornene) having CC moiety in the side chain. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3896–3902, 2010     

茂金属催化乙烯与降冰片烯共聚合研究

研究了茂金属催化体系Ｍｅ２ＳｉＣｐ２ＭＣｌ２／ＭＡＯ（Ｍ＝Ｚｒ，ｔｉ）催化乙烯与降冰片烯共聚合，考察了不同聚合条件下的共聚及乙烯动力学行为，对共聚物的结构进行了ＤＳＣ，１３Ｃ ＮＭＲ表征．研究表明，在相同的聚合条件下，Ｚｒ较Ｔｉ有更佳的共聚合催化性能．在相近的投料比条件下，得到了降冰片烯含量和Ｔｇ均较文献高的乙烯与降冰片烯的共聚物．     

Living copolymerization of ethylene with norbornene catalyzed by bis(pyrrolide-imine) titanium complexes with MAO

Bis(pyrrolide-imine) Ti complexes in conjunction with methylalumoxane (MAO) were found to work as efficient catalysts for the copolymerization of ethylene and norbornene to afford unique copolymers via an addition-type polymerization mechanism. The catalysts exhibited very high norbornene incorporation, superior to that obtained with Me(2)Si(Me(4)Cp)(N-tert-Bu)TiCl(2) (CGC). The sterically open and highly electrophilic nature of the catalysts is probably responsible for the excellent norbornene incorporation. The catalysts displayed a marked tendency to produce alternating copolymers, which have stereoirregular structures despite the C(2) symmetric nature of the catalysts. The norbornene/ethylene molar ratio in the polymerization medium had a profound influence on the molecular weight distribution of the resulting copolymer. At norbornene/ethylene ratios larger than ca. 1, the catalysts mediated room-temperature living copolymerization of ethylene and norbornene to form high molecular weight monodisperse copolymers (M(n) > 500,000, M(w)/M(n) < 1.20). (13)C NMR spectroscopic analysis of a copolymer, produced under conditions that gave low molecular weight, demonstrated that the copolymerization is initiated by norbornene insertion and that the catalyst mostly exists as a norbornene-last-inserted species under living conditions. Polymerization behavior coupled with DFT calculations suggested that the highly controlled living polymerization stems from the fact that the catalysts possess high affinity and high incorporation ability for norbornene as well as the characteristics of a living ethylene polymerization though under limited conditions (M(n) 225,000, M(w)/M(n) 1.15, 10-s polymerization, 25 degrees C). With the catalyst, unique block copolymers [i.e., poly(ethylene-co-norbornene)(1)-b-poly(ethylene-co-norbornene)(2), PE-b-poly(ethylene-co-norbornene)] were successfully synthesized from ethylene and norbornene. Transmission electron microscopy (TEM) indicated that the PE-b-poly(ethylene-co-norbornene) possesses high potential as a new material consisting of crystalline and amorphous segments which are chemically linked.     

Homo‐ and copolymerization of ethylene and norbornene with bis(β‐diketiminato) titanium complexes activated with methylaluminoxane

Homo‐ and copolymerization of ethylene and norbornene were investigated with bis(β‐diketiminato) titanium complexes [ArNC(CR₃)CHC(CR₃)NAr]₂TiCl₂ (R = F, Ar = 2,6‐diisopropylphenyl 2a; R = F, Ar = 2,6‐dimethylphenyl 2b ; R = H, Ar = 2,6‐diisopropylphenyl 2c ; R = H, Ar = 2,6‐dimethylphenyl 2d) in the presence of methylaluminoxane (MAO). The influence of steric and electric effects of complexes on catalytic activity was evaluated. With MAO as cocatalyst, complexes 2a–d are moderately active catalysts for ethylene polymerization producing high‐molecular weight polyethylenes bearing linear structures, but low active catalysts for norbornene polymerization. Moreover, 2a – d are also active ethylene–norbornene (E–N) copolymerization catalysts. The incorporation of norbornene in the E–N copolymer could be controlled by varying the charged norbornene. ¹³C NMR analyses showed the microstructures of the E–N copolymers were predominantly alternated and isolated norbornene units in copolymer, dyad, and triad sequences of norbornene were detected in the E–N copolymers with high incorporated content of norbornene. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 93–101, 2008     

Synthesis and Characterization of Amphiphilic Block Copolymer Containing PVP and Poly(5-benzyloxytrimethylene carbonate)

Amphiphilic block copolymers have attracted great interest recently, especially for thebiomedical uses1, . The hydrophilic blocks improve the biocompatibility of copolymer, 2while the hydrophobic blocks enhance the mechanics of the material and providever…