单原子Ge助剂修饰Cu(111)晶面上CO2加氢制甲醇的机理研究

针对CO₂热催化转化制甲醇过程中CO₂吸附、活化较困难及副产物较多的问题,提出采用单原子Ge助剂修饰Cu (111)晶面的解决思路,通过密度泛函理论(DFT)计算研究了CO₂在Ge-Cu(111)晶面上加氢合成甲醇的反应机理。结果表明,单原子Ge助剂的电子调控增加了与其相邻的Cu原子的电子云密度,使CO₂分子在含Ge活性界面上的吸附能力显著增强：CO₂在Ge-Cu(111)晶面上的吸附能约为Cu (111)晶面的1.5倍,约为Pd改性Cu(111)晶面的2.4倍,进而使逆水煤气变换(RWGS)反应路径速控步骤的活化能降低了近20 kJ·mol^-1,同时衍生出3条生成甲醇的RWGS新路径;此外,Ge-Cu(111)晶面上甲酸盐路径由于速控步骤活化能大幅上升而被禁阻,进而CO及烃类等副产物选择性大幅降低,Ge-Cu(111)晶面上CO₂加氢制甲醇选择性升高。     

氧分子在Pt低指数面上的吸附和解离

应用原子和表面簇合物相互作用的5参数Morse势方法(简称5-MP)构造推广的LEPS势对O₂-Pt分子体系进行了系统的研究, 获得了O₂分子在Pt的2个低指数面(111)和(110)重构面上的吸附几何、结合能和振动频率等临界点性质; 计算结果显示O₂在Pt(111)面上难解离, 且存在超氧化吸附态, 同时, 应用表面分子解离限和晶面解离距的概念分析了(111)面上的解离机理; 并根据分子指纹性质, 将O₂在Pt(110)缺行重构面上出现的振动频率860, 930, 1250 cm^－1进行了合理的指派.     

糠醛在Pt(111)表面的吸附和脱碳反应

采用广义梯度近似的密度泛函理论并结合平板模型的方法, 优化了糠醛分子在Pt(111)面的吸附模型,并探究了糠醛脱碳反应形成呋喃的机理. 结果表明: 吸附后糠醛分子环上的C―H(O)键及支链―CHO相对于金属表面倾斜上翘, 分子平面被扭曲, 易于呋喃的形成; 同时, 糠醛分子向Pt表面转移电子0.765e, 环中的大π键与Pt(111)表面的d轨道发生较强的相互作用, 使得糠醛的芳香性被破坏, 环上的碳原子呈现准sp³杂化. 此外, 对糠醛脱碳反应中的各反应步骤进行过渡态搜索, 通过比较各步骤的活化能, 得出糠醛更易先失去支链上的H形成酰基中间体(C₄H₃O)CO, 中间体继续脱碳加氢形成产物呋喃. 该过程的控速步骤为(C₄H₃O)CO^*+^*→C₄H₃O^*+CO^* (^*为吸附位),活化能为127.65 kJ·mol^-1.     

MnO2上氧气第一个电子转移步骤的从头计算研究

采用裸露簇和嵌入簇模型, 对β-MnO₂ (001), (110), (111)三个晶面以及O₂在(110)晶面的单址吸附模式(Pauling和Griffths模式), 进行从头计算. 从β-MnO₂ (001), (110), (111)三个晶面的电子结构差异以及O₂在(110)晶面吸附的吸附能、几何结构、集居数以及净电荷数分析得到: (001), (110), (111)三个晶面中(110)晶面的催化活性最高, 其活性顺序为(110)＞(111)＞(001). 氧气在(110)晶面的吸附, Pauling和Griffths两种吸附模式均存在, 属于化学吸附中的离子吸附. 氧气与MnO₂固体间发生了单电子转移, 氧气得到电子被还原成O₂^-, 转移电子属于整个体系, 具有离域性.     

MnO2上氧气第一个电子转移步骤的从头计算研究

采用裸露簇和嵌入簇模型, 对β-MnO₂ (001), (110), (111)三个晶面以及O₂在(110)晶面的单址吸附模式(Pauling和Griffths模式), 进行从头计算. 从β-MnO₂ (001), (110), (111)三个晶面的电子结构差异以及O₂在(110)晶面吸附的吸附能、几何结构、集居数以及净电荷数分析得到: (001), (110), (111)三个晶面中(110)晶面的催化活性最高, 其活性顺序为(110)＞(111)＞(001). 氧气在(110)晶面的吸附, Pauling和Griffths两种吸附模式均存在, 属于化学吸附中的离子吸附. 氧气与MnO₂固体间发生了单电子转移, 氧气得到电子被还原成O₂^-, 转移电子属于整个体系, 具有离域性.     

K-MnO/γ-Al2O3和Cu/SiO2催化剂应用于苯甲酸甲酯连续加氢合成无氯苯甲醇

以K-MnO/γ-Al₂O₃和Cu/SiO₂为催化剂, 利用固定床串联反应器实现了苯甲酸甲酯连续加氢合成无氯苯甲醇反应过程. K-MnO/γ-Al₂O₃和Cu/SiO₂催化剂对于苯甲酸甲酯连续加氢合成苯甲醇具有良好的加氢活性, 反应转化率可达89.2%, 苯甲醇的选择性为84.1%. 在苯甲酸甲酯加氢连续步骤中的氢醛比得到提高, 有效地抑制了副产物甲苯的生成. XRD, SEM和TPR表征结果表明: 采用吸附沉淀法制备的Cu/SiO₂-C15.2催化剂, 氧化铜在载体上具有良好的分散性能, 并且易于还原, 表现出最佳的苯甲醛加氢活性.     

X型沸石催化剂的甲苯甲醇侧链烷基化反应和吸附量热研究

本文报道了以原粉NaX和成型NaX为前体分别通过离子交换法及浸渍法制得的几种碱金属阳离子X型沸石上甲苯甲醇侧链烷基化反应的活性和选择性。并以NH₃和CO₂的微分吸附量热表征了这些催化剂的酸碱性。结果表明，在所有催化剂中成型KX的侧链反应活性最高。该催化剂对NH₃的微分吸附热为45 kJ/mol左右，吸附覆盖度为3.3 μmol/m²；对CO₂的微分吸附热在128～60 kJ/mol之间，吸附覆盖度为0.16 μmol/m²。对比其他三种酸性相近的催化剂，碱性更强(如K/KX(p)和K/KX(c))或更弱(如KX(p))时，侧链反应活性都较差。看来，成型KX催化剂的表面酸碱性匹配对侧链烷基化反应比较有利。该结果进一步证明了在甲苯甲醇侧链烷基化反应中催化剂酸碱协同作用的重要性。     

具有不同形貌和择优取向的MxWO3·xH2O粉晶的制备与表征

采用沉淀结合渗析的方法，以钨酸钠、钨酸铵为原料，制备了不同形貌、具有择优取向的M_xWO₃·xH₂O(M=Na⁺，NH₄⁺，x<1)粉晶，利用SEM、XRD、TG、IR、XPS等手段对粉体进行表征，考察了不同渗析时间和焙烧温度对粉晶形貌、晶化程度及结构转变的影响。结果表明，长时间渗析后粉体的晶化程度明显提高，并沿(010)晶面方向择优生长，形貌由不规则形变为梭形和蝴蝶形。经空气气氛400 ℃焙烧后，Na_xWO₃·xH₂O和(NH₄)_xWO₃·xH₂O粉晶均转变为沿(200)晶面方向择优生长的立方青铜相，且形貌也发生改变。     

Cu-MCM-41介孔分子筛中不同价态铜上的吸附性能研究

合成了不同铜含量的Cu-MCM-41，高温还原后仍具有良好的介孔结构。孔壁中的铜容易被H₂还原为Cu(0)。通过在氦气流中加热，可以导致孔壁中的Cu(II)还原为Cu(I)。MCM-41中不同价态的铜具有不同的吸附性能：Cu(0)强烈吸附O₂，吸附热高达427 kJ·mol^-1；Cu(I)在室温下几乎不吸附O₂，表明Cu(I)在室温下较稳定；而Cu(I)在对CO与C₂H₄的吸附中，除了CO的吸附热与Cu(0)的相近外，所生成的吸附热与吸附量均较高。红外光谱也表明，Cu(I)比Cu(0)更容易吸附CO与C₂H₄。C₂H₄仅仅以π-键键合在Cu(0)表面，而在Cu(I)表面上却是以di-σ和π-键键合，由于di-σ键较强，使得C₂H₄在Cu(I)上具有较高的吸附热。     

质子导体BaCe0.4Zr0.4M0.2O3-δ (M=In，Y，Gd，Sm)化学稳定性及电性能

采用高温固相法制备了不同阳离子掺杂的BaCe_0.4Zr_0.4M_0.2O_3-δ (M=In,Y,Gd,Sm)系列质子导体。运用X射线衍射仪、扫描电子显微镜分别对四类质子导体的物相结构、微观形貌进行了表征,应用IM6e型电化学工作站测定了其不同温度下的阻抗谱,并对样品在CO₂和沸水中的稳定性进行了研究。结果表明：除Sm³⁺掺杂的质子导体有少量的杂质相Sm₂O₃外,其他3种均为单相立方晶钙钛矿结构;对CO₂和沸水皆表现良好的化学稳定性;Y³⁺掺杂的质子导体具有高的电导率,800 ℃约为2.07×10^-2 S·cm^-1,空气气氛电导活化能为72.34 kJ·mol^-1。     

On the hydrogenation of CO and CO2 over copper/zirconia and palladium/zirconia catalysts

Summary Zirconia-supported hydrogenation catalysts were obtained by activation of the amorphous precursors Cu₇₀Zr₃₀ and Pd₂₅Zr₇₅ under CO₂ hydrogenation conditions. Catalysts of comparable compositions prepared by co-precipitation and wet impregnation of zirconia with copper- and palladium salts, respectively, served as reference materials. The catalyst surfaces under reaction conditions were investigated by diffuse reflectance FTIR spectroscopy. Carbonates, formate, formaldehyde, methylate and methanol were identified as the pivotal surface species. The appearance and surface concentrations of these species were correlated with the presence of CO₂ and CO as reactant gases, and with the formation of either methane or methanol as reaction products. Two major pathways have been identified from the experimental results. i) The reaction of CO₂/H₂-mixtures on Cu/zirconia and Pd/zirconia primarily yields surface formate, which is hydrogenated to methane without further observable intermediates. ii) The catalytic reaction between CO and hydrogen yields -bonded formaldehyde, which is subsequently reduced to methylate and methanol. Interestingly, there is no observable correlation between absorbed formaldehyde or methylate on the one hand, and gas phase methane on the other hand. The reactants, CO₂ and CO, can be interconverted catalytically by the water gas shift reaction. The influence of the metals on this system of coupled reactions gives rise to different product selectivities in CO₂ hydrogenation reactions. On zirconia-supported palladium catalysts, surface formate is efficiently reduced to methane, which consequently appears to be the principal CO₂ hydrogenation product. In contrast, there is a favorable reaction pathway on copper in which CO is reduced to methanol without C-O bond cleavage; surface formate does not participate significantly in this reaction. In CO₂ hydrogenations on copper/zirconia, methanol can be obtained as the main product, from a sequence of the reverse water gas shift reaction followed by CO reduction.     

A New Type of Photocatalysis Initiated by Photoexcitation of Adsorbed Carbon Dioxide on ZrO2

ZrO₂ has been found to be an effective photocatalyst for reduction of CO₂ by hydrogen or methane at room temperature. The effective photon energy is less than the band gap energy of ZrO₂ (5.0 eV), indicating that photoexcitation of bulk ZrO₂ is not involved. The reaction is initiated by photoexcitation of surface carbonates derived from adsorption of CO₂ to convert it to a CO₂ ^– radical, which in turn reacts with hydrogen or methane to form surface formate. The formate is stable at temperatures below 573 K, but works as a reductant of CO₂ under photoirradiation. A new type of reaction mechanism is proposed.     

Catalytic combustion of carbon particulates over perovskite-type oxides

A Cu/Cr₂O₃ catalyst was prepared by co-precipitation method, studied in methanol dehydrocoupling to methyl formate in different gas streams and characterized by BET, XRD, TPR, TPD of NH₃ and CO₂, etc. The results demonstrate that the catalyst can catalyze the dehydrocoupling of methanol to methyl formate in high efficiency,e. g. 99% selectivity to methyl formate at 48% conversion of methanol. The results further indicate that metallic copper might be the active species for the formation of methyl formate     

甲硫醇在Cu(111)表面的解离吸附: 密度泛函理论研究

采用基于密度泛函理论的第一性原理方法和平板模型研究了CH₃SH分子在Cu(111)表面的吸附反应.系统地计算了S原子在不同位置以不同方式吸附的一系列构型, 第一次得到未解离的CH₃SH分子在Cu(111)表面顶位上的稳定吸附构型,该构型吸附属于弱的化学吸附, 吸附能为0.39 eV. 计算同时发现在热力学上解离结构比未解离结构更加稳定. 解离的CH₃S吸附在桥位和中空位之间, 吸附能为0.75-0.77 eV. 计算分析了未解离吸附到解离吸附的两条反应路径, 最小能量路径的能垒为0.57 eV. 计算结果还表明S―H键断裂后的H原子并不是以H₂分子的形式从表面解吸附而是以与表面成键的形式存在. 通过比较S原子在独立的CH₃SH分子和吸附状态下的局域态密度, 发现S―H键断裂后S原子和表面的键合强于未断裂时S原子和表面的键合.     

CO2 Reduction Mechanism on the Cu2O(110) Surface: A First-Principles Study

Cu₂O is an attractive catalyst for the selective reduction of CO₂ to methanol. However, the mechanism of the reaction and the role of the Cu species in different oxidation states are not well understood yet. In this work, by first-principles calculations, we investigate the mechanism of the reaction on the Cu₂O(110) surface, which is the most selective for methanol, in different degrees of reduction: ideal surface, slightly reduced surface (SRS), and partially reduced surface (PRS). The most favorable reaction pathways on the three surfaces were identified. We found that Cu(I) on the ideal surface is not capable of chemisorbing CO₂, but surface oxygen serves as the active site which selectively converts CO₂ to CH₃OH with a limiting potential of −0.77 V. The Cu(0) on the SRS and PRS promotes the adsorption and reduction of CO₂, while the removal of the residue O* becomes potential/rate limiting with a more negative limiting potential than the ideal surface. The SRS is selective to methanol while the PRS becomes selective to methane. The result suggests that the key to high methanol selectivity is to avoid the reduction of Cu(I), which provides a new strategy for the design of more efficient catalysts for selective CO₂ reduction to methanol.     

Methanol‐Assisted Autocatalysis in Catalytic Methanol Synthesis

Catalytic methanol synthesis is one of the major processes in the chemical industry and may grow in importance, as methanol produced from CO₂ and sustainably derived H₂ are envisioned to play an important role as energy carriers in a future low‐CO₂‐emission society. However, despite the widespread use, the reaction mechanism and the nature of the active sites are not fully understood. Here we report that methanol synthesis at commercially applied conditions using the industrial Cu/ZnO/Al₂O₃ catalyst is dominated by a methanol‐assisted autocatalytic reaction mechanism. We propose that the presence of methanol enables the hydrogenation of surface formate via methyl formate. Autocatalytic acceleration of the reaction is also observed for Cu supported on SiO₂ although with low absolute activity, but not for Cu/Al₂O₃ catalysts. The results illustrate an important example of autocatalysis in heterogeneous catalysis and pave the way for further understanding, improvements, and process optimization of industrial methanol synthesis.     

Mechanism of the Reverse Water–Gas Shift Reaction Catalyzed by Cu<Subscript>12</Subscript>TM Bimetallic Nanocluster: A Density Functional Theory Study

Density functional theory calculations were carried out to investigate Cu₁₂TM (TM = Co, Rh, Ir, Ni, Pd, Pt, Ag, Au) bimetallic metal catalysts for the mechanism of reverse water–gas shift (RWGS) reaction. The three possible reaction pathways relevant to the RWGS reaction are explored, including the CO₂ dissociation, carboxyl, and formate mechanisms. Our results indicate that the RWGS reaction prefers to follow the CO₂ dissociation mechanism on Cu₁₂TM surfaces. A detailed potential energy diagram of the kinetically favored mechanism is presented that shows that the RDS of reaction are the formation of H₂O and carboxyl (HOCO), formate (HCOO) dissociation, respectively. And, Cu₁₂TM (TM = Co, Pt) are lower than other catalysts from the energy barrier of elementary step. Moreover, the catalytic behavior of a Cu₁₂TM cluster is changed significantly due to the modifiers, via the electron transfer from TM to Cu-based cluster, and the activation barrier decreases with doped TM. The turnover frequency of the Cu₁₂Co is the highest value, which thus is more efficiency catalyst to RWGS reaction. To gain insights into the synergistic effect in catalytic activity of the Cu₁₂TM bimetallic cluster, a projected density of states analysis has been performed. Our works will be important for predicting the energetic trends and designing a better catalyst of RWGS reaction.     

Electron-Rich Bi Nanosheets Promote CO2⋅− Formation for High-Performance and pH-Universal Electrocatalytic CO2 Reduction

Electrochemical CO₂ reduction reaction (CO₂RR) to chemical fuels such as formate offers a promising pathway to carbon-neutral future, but its practical application is largely inhibited by the lack of effective activation of CO₂ molecules and pH-universal feasibility. Here, we report an electronic structure manipulation strategy to electron-rich Bi nanosheets, where electrons transfer from Cu donor to Bi acceptor in bimetallic Cu−Bi, enabling CO₂RR towards formate with concurrent high activity, selectivity and stability in pH-universal (acidic, neutral and alkaline) electrolytes. Combined in situ Raman spectra and computational calculations unravel that electron-rich Bi promotes CO₂⋅⁻ formation to activate CO₂ molecules, and enhance the adsorption strength of *OCHO intermediate with an up-shifted p-band center, thus leading to its superior activity and selectivity of formate. Further integration of the robust electron-rich Bi nanosheets into III–V-based photovoltaic solar cell results in an unassisted artificial leaf with a high solar-to-formate (STF) efficiency of 13.7 %.     

以类水滑石为前驱体的Cu/Zn/Al/(Zr)/(Y)催化剂制备及其催化CO_2加氢合成甲醇的性能

采用共沉淀法合成了Cu:Zn:Al:Zr:Y原子比分别为2:1:1:0:0、2:1:0.8:0.2:0、2:1:0.8:0:0.2和2:1:0.8:0.1:0.1的Cu/Zn/Al/(Zr)/(Y)类水滑石化合物.将前驱体材料在空气中500°C焙烧后得到复合金属氧化物,并将其用于CO2加氢合成甲醇反应.采用X射线衍射(XRD)、热重(TG)分析、N2吸附、氧化亚氮(N2O)反应吸附、氢气程序升温还原(H2-TPR)和H2/CO2程序升温脱附(H2/CO2-TPD)技术对所制备的样品进行表征.结果表明,Zr和Y的引入使得催化剂BET比表面积大幅增加,金属铜的比表面积和分散度均按以下顺序依次增加:Cu/Zn/AlCu/Zn/Al/ZrCu/Zn/Al/YCu/Zn/Al/Zr/Y,然而,强碱位数目占总碱位数目的比例的变化顺序为:Cu/Zn/AlCu/Zn/Al/YCu/Zn/Al/Zr/YCu/Zn/Al/Zr.活性评价结果揭示CO2转化率取决于金属铜的比表面积,甲醇选择性则随强碱位比例的增加而线性增加.因而,Zr和Y的引入有利于甲醇的合成,Cu/Zn/Al/Zr/Y催化剂上的甲醇收率最高.