Determination of Tetracyclines in Honey Using Liquid Chromatography with Ultraviolet Absorbance Detection and Residue Confirmation by Mass Spectrometry

A determination method has been optimized and validated for the simultaneous analysis of tetracycline （TC）, oxytetracycline （OTC）, chlortetracycline （CTC） and doxycycline （DC） in honey. Tetracyclines （TCs） were removed from honey samples by chelation with metal ions bound to small Chelating Sepharose Fast Flow columns and eluted with Na2EDTA-Mcllvaine pH 4.0 buffers. Extracts were further cleaned up by Oasis HLB solid-phase extraction （SPE）, while other solid-phase extraction cartridges were compared. Chromatographic separation was achieved using a polar end-capped C 18 column with an isocratic mobile phase consisting of oxalic acid, acetonitrile and methanol. LC with ultraviolet absorbance at 355 nm resulted in the quantitation of all four tetracycline residues from honey samples fortified at 15, 50, and 100 ng/g, with liner ranges for tetracyclines of 0.05 to 2 μg/mL. Mean recoveries for tetracyclines were greater than 50% with R.S.D. values less than 10% （n= 18）. Detection limits of 5, 5, 10, 10 ng/g for oxytetracycline, tetracycline, chlortetracycline and doxycycline, respectively and quantitation limits of 15 ng/g for all the four tetracyclines were determined. Direct confirmation of the four residues in honey （2-50 ng/g） was realized by liquid chromatography-tandem mass spectrometry （LC/MS/MS）. The linear ranges of tetracyclines determined by LC/MS/MS were between 5 to 300 ng/mL, with the linear correlation coefficient r〉 0.995. The limits of detection of 1 to 2 ng/g were obtained for the analysis of the TCs in honey.     

Online coupling of molecularly imprinted solid-phase extraction to HPLC for determination of trace tetracycline antibiotic residues in egg samples

An automated system has been developed for the determination of trace tetracycline antibiotics (TCs) in egg samples, based on online molecularly imprinted solid-phase extraction (MISPE) coupling with high-performance liquid chromatography (HPLC). Oxytetracycline and chlortetracycline were chosen as mixed templates to synthesize highly selective molecularly imprinted polymers for online extraction. Under the optimal online MISPE-HPLC condition, 10 mL egg samples were injected into the MISPE column and then the matrix was washed out. By rotating the switching valve, TCs were transferred to the analytical column and then separated by HPLC. Because sample pretreatment and chromatographic separation were carried out simultaneously, the whole analytical time (18 min) was significantly shortened compared with conventional offline techniques. The detection limits ranged from 0.8 to 1.3 ng/g. The enhancement factors were in the range of 159-410. The spiked recoveries of TCs in real egg samples ranged from 91.6 to 107.6% and the relative standard deviations (RSDs) were not higher than 4.0%.     

Analysis of tetracyclines from milk powder by molecularly imprinted solid‐phase dispersion based on a metal–organic framework followed by ultra high performance liquid chromatography with tandem mass spectrometry

A novel molecularly imprinted polymer that could selectively recognize tetracyclines in milk powder was synthesized using a metal–organic framework as a support material, tetracycline as template molecule, and 3‐aminophenylboronic acid as a functional monomer and a cross‐linking agent. The novel molecularly imprinted polymer was characterized by Fourier transform infrared spectrometry, transmission electron microscopy, X‐ray diffractometry, thermogravimetric analysis, and N₂ adsorption/desorption measurements. The adsorption isotherms, adsorption kinetics, adsorption thermodynamics, and selective adsorption experiments of the novel molecularly imprinted polymer to tetracycline were also studied. The novel molecularly imprinted polymer was used as dispersant of matrix solid‐phase dispersion to extraction tetracyclines. After that, the tetracyclines extracted from milk powder were determined by ultra high performance liquid chromatography with tandem mass spectrometry. Under the optimal conditions, the detection limits of tetracyclines were 0.217–0.318 ng/g. The relative standard deviations of intra‐ and interday precision ranged from 3.8 to 6.9% and from 2.8 to 7.4%, respectively. In all three concentration levels (1.0, 10, 50 ng/g), the recoveries of tetracyclines ranged from 84.7 to 93.9%. The method was successfully applied to the determination of tetracyclines in milk powder.     

Forensic analysis of dyed textile fibers

A rapid, specific, and sensitive method has been developed using molecularly imprinted polymers (MIPs) as solid-phase extraction sorbents for extraction of trace tetracycline antibiotics (TCs) in foodstuffs. MIPs were prepared by precipitation polymerization using tetracycline as the template. Under the optimal condition, the imprinting factors for MIPs were 4.1 (oxytetracycline), 7.0 (tetracycline), 7.4 (chlortetracycline), 7.7 (doxycycline), respectively. Furthermore, the performance of MIPs as solid-phase extraction sorbents was evaluated and high extraction efficiency of molecularly imprinted solid-phase extraction (MISPE) procedure was demonstrated. Compared with commercial sorbents, MISPE gave a better cleanup efficiency than C18 cartridge and a higher recovery than Oasis HLB cartridge. Finally, the method of liquid chromatography–tandem mass spectrometry coupled with molecular-imprinted solid-phase extraction was validated in real samples including lobster, duck, honey, and egg. The spiked recoveries of TCs ranged from 94.51% to 103.0%. The limits of detection were in the range of 0.1–0.3 μg kg⁻¹. Chromatograms obtained by direct injection of the spiked egg extracts (5 × 10^-3 mmol L⁻¹) and purification with MISPE     

Determination of tetracyclines residues in honey by on-line solid-phase extraction high-performance liquid chromatography

An automated system using on-line solid-phase extraction (SPE) high-performance liquid chromatography (HPLC) with ultraviolet (UV) detection was developed for the determination of tetracyclines (TCs), such as tetracycline (TC), oxytetracycline (OTC), chlortetracycline (CTC), metacycline (MC), and doxycycline (DC) in honey. One milliliter diluted honey sample was injected into a conditioned C18 SPE column and the matrix was washed out with water for 3 min. By rotation of the switching valve, TCs were eluted and transferred to the analytical column by the chromatographic mobile phase. Chromatographic conditions were optimized. TCs were separated in less than 8 min with a gradient elution using a mixture of 0.8% formic acid and acetonitrile. The UV detection was performed at 365 nm. The conditions for on-line SPE, including solvent and total time for loading sample and washing matrix were also optimized. Time for extraction and separation decreased greatly. For the five kinds of TCs, the limits of detection (LODs) at a signal-to-noise of 3 ranged from 5 to 12 ng g⁻¹. The relative standard deviations (R.S.D.) for the determination of TCs ranged from 3.4 to 7.1% within a day and ranged from 3.2 to 8.9% in 3 days, respectively.     

分子印迹固相萃取-高效液相色谱法测定蜂蜜中三种氟喹诺酮类抗生素残留

采用沉淀聚合法,以诺氟沙星为模板分子,合成了对氟喹诺酮类(FQs)抗生素特异性识别的分子印迹聚合物(MIPs),其印迹因子为3.17,亲和位点总数为3.27μmol/g。以该MIPs做为固相萃取柱填料,建立了分子印迹固相萃取-高效液相色谱检测蜂蜜中三种FQs抗生素残留的方法。与Oasis HLB固相萃取柱相比,该分子印迹固相萃取柱(MISPE)具有更好的净化能力和更高的富集效率。最佳条件下,三种FQs抗生素的线性范围为0.125～12.5mg/kg,相关系数均大于0.999。方法的检出限(S/N=3)为9～12μg/kg,三种FQs抗生素的加标回收率为96.5%～104.1%,相对标准偏差不高于6.2%(n=5)。该方法有望用于蜂蜜中FQs抗生素残留的常规检测。     

Preparation and selective recognition of a novel solid‐phase microextraction fiber combined with molecularly imprinted polymers for the extraction of parabens in soy sample

A prepared molecularly imprinted polymer with ethyl p‐hydroxybenzoate as template molecule was applied for the first time to a homemade solid‐phase microextraction fiber. The molecularly imprinted polymer‐coated solid‐phase microextraction fiber was characterized by scanning electron microscopy and thermogravimetric analysis. Various parameters were investigated, including extraction temperature, extraction time, and desorption time. Under the optimum extraction conditions, the molecularly imprinted polymer‐coated solid‐phase microextraction fiber exhibited higher selectivity with greater extraction capacity toward parabens compared with the nonimprinted polymer‐coated solid‐phase microextraction fiber and commercial fibers. The molecularly imprinted polymer‐coated solid‐phase microextraction fiber was tested using gas chromatography to determine parabens, including methyl p‐hydroxybenzoate, ethyl p‐hydroxybenzoate, and propyl p‐hydroxybenzoate. The linear ranges were 0.01–10 μg/mL with a correlation coefficient above 0.9943. The detection limits (under signal‐to‐noise ratio of 3) were below 0.30 μg/L. The fiber was successfully applied to the simultaneous analysis of three parabens in spiked soy samples with satisfactory recoveries of 95.48, 97.86, and 92.17%, respectively. The relative standard deviations (n=6) were within 2.83–3.91%. The proposed molecularly imprinted polymer‐coated solid‐phase microextraction method is suitable for selective extraction and determination of trace parabens in food samples.     

Isolation of tetracyclines in milk using a solid-phase extracting column and water eluent

An isolating method using a solid-phase extraction (SPE) ISOLUTE® C8 endcapped syringe-column for routine monitoring of residual tetracyclines (TCs) (oxytetracycline (OTC), tetracycline (TC), chlortetracycline (CTC), and doxycycline (DC)) in cow's milk is presented. In the simplest and most environmentally harmless method, milk samples could be applied directly to the SPE column, following which all TCs were eluted with water. No organic solvents were used at all. The purified sample was injected into a high-performance liquid chromatography (HPLC) with a photo-diode array detector (PDAD). For the HPLC determination/identification, a LiChrospher® 100 RP-8 endcapped column and a mobile phase of acetonitrile −7% (v v⁻¹) acetic acid solution (in water) (35:65, v v⁻¹) with a PDAD was used. The total time required for the analysis of one sample was <40 min. Average recoveries (spiked 0.1-1.0 μg ml⁻¹ each drug) and their standard deviations were >80 and <5%, respectively.     

Preparation and evaluation of solid-phase microextraction fiber based on molecularly imprinted polymers for trace analysis of tetracyclines in complicated samples

Molecularly imprinted polymer (MIP) is widely used in many fields because of its characteristics of high selectivity, chemical stability and easy preparation. To enhance the selectivity and applicability of solid-phase microextraction (SPME), a novel MIP-coated SPME fiber was firstly prepared by multiple co-polymerization method with tetracycline as template. It could be coupled directly to high-performance liquid chromatography (HPLC) and used for trace analysis of tetracyclines (TCs) in complicated samples. The characteristics and application of the fibers were investigated. The electron microscope provided a crosslinked and porous surface, and the average thickness of the MIP coating was 19.5 microm. Compared with the non-imprinted polymer (NIP) coated fibers, the special selectivity to tetracycline and structure-similar oxytetracycline, doxycycline, chlortetracycline were discovered with the MIP-coated fibers. The adsorption and desorption of TCs with the MIP-coated fiber could be achieved quickly. A method for the fluorimetric determination of four TCs by the MIP-coated SPME coupled with HPLC was developed. The optimized extraction conditions such as extraction solvent, desorption solvent, and stirring speed were studied. Linear ranges for the four TCs were 5.00-200 microg/L and detection limits were within the range of 1.0-2.3 microg/L. The method was applied to simultaneous multi-residue analysis of four TCs in the spiked chicken feed, chicken muscle, and milk samples with the satisfactory recoveries.     

A molecularly imprinted photonic polymer sensor with high selectivity for tetracyclines analysis in food

A molecularly imprinted photonic polymer (MIPP) sensor for respective detection of tetracycline, oxytetracycline and chlortetracycline is developed based on the combination of a colloidal crystal templating method and a molecular imprinting technique. Colloidal crystal templates are prepared from monodisperse polystyrene colloids. The molecularly imprinted polymer, which is embodied in the colloidal crystal templates, is synthesized with acrylic acid and acrylamide as monomers, N,N'-methylene bisacrylamide as a cross-linker and tetracyclines (TCs) as imprinting template molecules. After removal of the colloidal crystal template and the molecularly imprinted template, the resulted MIPP consists of a three-dimensional, highly ordered and interconnected macroporous array with a thin hydrogel wall, where nanocavities complementary to analytes in shape and binding sites are distributed. The response of MIPP to TCs stimulants in aqueous solution is detected through a readable Bragg diffraction red-shift, which is due to the lattice change of MIPP structures responding to their rebinding to the target TCs molecules. A linear relationship was found between the Δλ and the concentration of TCs in the range from 0.04 μM to 0.24 μM. With this sensory system, direct and selective detection of TCs has been achieved without using label techniques and expensive instruments. The developed method has been applied successfully to detect tetracycline in milk and honey samples.     

Determination of sulfadiazine in eggs using molecularly imprinted solid‐phase extraction coupled with high‐performance liquid chromatography

The development of a simple and effective method for the isolation and purification of sulfadiazine residues in food of animal origin is of great significance since it is a great danger to human health. An off‐line molecularly imprinted solid‐phase extraction with high‐performance liquid chromatography method was proposed for the selective pretreatment and determination of sulfadiazine in eggs, rapidly and effectively. The molecularly imprinted polymer was proved to have a homogeneous spherical structure and porous surface morphology with excellent adsorption capacity of 5258 μg/g for sulfadiazine. The newly established method showed a good linearity in the range of 0–200 μg/L, low limits of detection (0.06 μg/L), acceptable reproducibility (RSD, 2.60–5.03%, n = 3), and satisfactory relative recoveries (78.22–86.10%). It was demonstrated that the proposed molecularly imprinted solid‐phase extraction with high‐performance liquid chromatography method could be applied to determine sulfadiazine in eggs, which simplified the pretreatment procedure and improved the accuracy of the analysis process by reducing the loss of sulfadiazine in the fat‐removing procedure compared with traditional methods. Molecularly imprinted solid‐phase extraction with excellent selectivity and adsorption capacity is a simple, rapid, selective, and effective pretreatment method for the determination of sulfadiazine in egg samples.     

Recognition characteristics of molecularly imprinted microspheres for triazine herbicides using hydrogen-bond array strategy and their analytical applications for corn and soil samples

The homogeneous molecularly imprinted microspheres (MIMs) based on a biologically inspired hydrogen-bond array were prepared using allobarbital as the novel functional monomer and divinylbenzene as the cross-linker. The host-guest binding characteristics were examined by molecular simulation and infrared spectroscopy. The resultant MIMs were evaluated using high performance liquid chromatography and solid-phase extraction. The results obtained demonstrate that the good imprinting effect and the excellent selectivity of MIMs are mainly due to the interaction involving the formation of three-point hydrogen bond between host and guest. The complete baseline separation was obtained for five triazine analogues and a metabolite on the MIM HPLC column. The MIMs were further successfully used as a specific sorbent for selective extraction of simetryne from corn and soil samples by molecularly imprinted solid phase extraction. Detection limits and recoveries were 5.8 μg/kg and 0.14 μg/kg and 87.4-105% and 94.6-101% for simetryne in corn and soil sample, respectively.     

Preparation of hydrophilic molecularly imprinted solid‐phase microextraction fiber for the selective removal and extraction of trace tetracyclines residues in animal derived foods

The present work reported a novel hydrophilic and selective solid‐phase microextraction fiber by improved multiple co‐polymerization method immobilization of tetracycline molecularly imprinted polymer on a stainless steel wire and directly coupled with high‐performance liquid chromatography for sensitive determination of trace tetracyclines residues in animal derived foods. The developed molecularly imprinted polymer coated solid‐phase microextraction fibers were characterized through scanning electron microscopy, Fourier transfer infrared spectroscopy, thermogravimetric analysis, and adsorption experiments, the fiber with cross‐linked and porous structure was observed and high thermal and chemical stability. The maximum adsorption capacity of this fiber with good selectivity reached 2.35 µg/mg in aqueous matrices, and showed good repeatability (relative standard deviation ≤ 6.6%, n = 5) and satisfying reproducibility between fiber to fiber (relative standard deviation ≤ 7.8%, n = 5). Under the optimized solid‐phase microextraction conditions, satisfactory linearity (5–1000 µg/L) and detection limits (0.38–0.72 µg/kg, S/N = 3) for all the tetracyclines were obtained. The practicality of this method was proved by adding tetracycline, oxytetracycline at three levels to milk, chicken, and fish samples with good recoveries of 77.3–104.4%.     

Determination of melamine in aquaculture feed samples based on molecularly imprinted solid‐phase extraction

This research highlights the application of highly efficient molecularly imprinted solid‐phase extraction for the preconcentration and analysis of melamine in aquaculture feed samples. Melamine‐imprinted polymers were synthesized employing methacrylic acid and ethylene glycol dimethacrylate as functional monomer and cross‐linker, respectively. The characteristics of obtained polymers were evaluated by scanning electron microscopy, Fourier transform infrared spectroscopy and binding experiments. The imprinted polymers showed an excellent adsorption ability for melamine and were applied as special solid‐phase extraction sorbents for the selective cleanup of melamine. An off‐line molecularly imprinted solid‐phase extraction procedure was developed for the separation and enrichment of melamine from aquaculture feed samples prior to high‐performance liquid chromatography analysis. Optimum molecularly imprinted solid‐phase extraction conditions led to recoveries of the target in spiked feed samples in the range 84.6–96.6% and the relative standard deviation less than 3.38% (n = 3). The aquaculture feed sample was determined, and there was no melamine found. The results showed that the molecularly imprinted solid‐phase extraction protocols permitted the sensitive, uncomplicated and inexpensive separation and pre‐treatment of melamine in aquaculture feed samples.     

A molecularly imprinted organic–inorganic hybrid monolithic column for the selective extraction and HPLC determination of isoprocarb residues in rice

An IPC‐imprinted (IPC is isoprocarb) poly(methacrylic acid)/SiO₂ hybrid monolithic column was prepared and applied for the recognition of the template. The hybrid monolithic column was synthesized in a micropipette tip using methyltrimethoxysilane as the inorganic precursor, 3‐(methacryloxy)propyltrimethoxysilane as the coupling agent, and ethylene glycol dimethacrylate as the cross‐linker. The synthesis conditions, including the porogenic solvent, coupling agent, volume ratio of the inorganic alcoholysate and organic part, were optimized. The prepared monolithic column was characterized by SEM and FTIR spectroscopy. A simple, rapid, and sensitive method for the determination of IPC in rice using the imprinted monolithic column microextraction combined with HPLC was developed. Several parameters affecting the sample pretreatment were investigated, including the eluent, washing solution, and loading sample volume. The linearity of the calibration curve was observed in the range of 9.0–1000 μg/kg for IPC in rice with the correlation coefficient (r²) of 0.9983. The LOD was 3.0 μg/kg (S/N = 3). The assay gave recovery values ranging from 91 to 107%. The proposed method has been successfully applied for the selective extraction and sensitive determination of IPC in rice and a satisfactory result was obtained.     

Determination of Chloramphenicol Residues in Foods by ELISA and LC-MS/MS Coupled with Molecularly Imprinted Solid Phase Extraction

The combination of molecularly imprinted solid-phase extraction (MISPE) with ELISA and LC-MS/MS was developed for the detection of chloramphenicol (CAP) in honey samples. Significant recoveries of 99.1 ± 7.1 and 98.8 ± 8.2% were obtained for intra- and inter-assay determination by ELISA determination, respectively. The limit of detection of CAP was 0.034 μg kg^?1 and the limit of quantification was 0.046 μg kg^?1. Determination and validation of CAP by using LC-MS/MS were performed following the same extraction and purification process as for the ELISA. The results demonstrated that the CAP samples purified by using MISPE were simultaneously applicable to analysis by ELISA and LC-MS/MS.     

Liquid chromatography with ultraviolet absorbance detection for the analysis of tetracycline residues in honey

The separation of tetracyclines (TCs) using reversed-phase liquid chromatography (LC) is proposed. The use of an amide-based stationary phase prevents the interaction of tetracyclines with the residual silanol groups and thus avoids the appearance of tailed peaks. Detection was based on using an UV spectrophotometer and gradient elution with acetonitrile-oxalic acid as mobile phase permitted good separation of all the peaks. Specificity was demonstrated by the retention characteristics, UV spectra and peak purity index. Linearity, precision, recovery and sensitivity were satisfactory. The procedure was applied to the analysis of tetracycline residues (tetracycline, oxytetracycline (OTC), chlortetracycline (CTC), doxycycline (DC), minocycline (MINO) and methacycline (MTC)) in honey of different types. Extraction involved using a mild acidic solvent containing EDTA to release protein-bound or sugar-bound tetracyclines. For the clean-up step, solid phase extraction using phenyl cartridges was applied. Detection limits in the honey using the proposed procedure are between 15 and 30 ng g(-1), depending on the tetracycline.     

Development and validation of an HPLC confirmatory method for the determination of seven tetracycline antibiotics residues in milk according to the European Union Decision 2002/657/EC

An HPLC method with diode-array detection, at 355 nm, was developed and validated for the determination of seven tetracyclines (TCs) in milk: minocycline (MNC), TC, oxytetracycline (OTC), methacycline (MTC), demeclocycline (DMC), chlortetracycline (CTC), and doxycycline (DC). Oxalate buffer (pH 4) was used with 20% TCA as a deproteinization agent for the extraction of analytes from milk followed by SPE. The separation was achieved on an Inertsil ODS-3, 5 microm, 250 x 4 mm(2 )analytical column at ambient temperature. The mobile phase, a mixture of A: 0.01 M oxalic acid and B: CH(3)CN, was delivered using a gradient program. The procedure was validated according to the European Union decision 2002/657/EC determining selectivity, stability, decision limit, detection capability, accuracy, and precision. Mean recoveries of TCs from spiked milk samples (50, 100, and 200 ng/g) were 93.8-100.9% for MNC, 96.8-103.7% for OTC, 96.3-101.8% for TC, 99.4-107.2% for DMC, 99.4-102.9% for CTC, 96.3-102.7% for MTC, and 94.6-102.1% for DC. All RSD values were lower than 8.5%. The decision limits CC(a) calculated by spiking 20 blank milk samples at MRL (100 microg/kg) ranged from 101.25 to 105.84 microg/kg, while detection capability CC(b )from 103.94 to 108.88 microg/kg.     

Synthesis and Characterization of a Molecularly Imprinted Polymer for Preconcentration of Clothianidin in Environmental Samples

A molecularly imprinted polymer for the selective solid-phase extraction of clothianidin was prepared using the analyte as a template, methacrylic acid and styrene as functional monomers, ethylene glycol dimethacrylate as the cross-linker, acetonitrile as a porogen, and 2,2-azobisisobutyronitrile as an initiator. The polymer was characterized by scanning electron microscopy and infrared spectroscopy. Adsorption measurements indicated that the molecularly imprinted polymers exhibited good recognition ability and fast dynamics toward clothianidin. Using this imprinted polymer as a sorbent, a new method of molecularly imprinted solid phase extraction coupled to high performance liquid chromatography for the determination of clothianidin residues was developed. The molecularly imprinted solid phase extraction procedure was optimized to purify and enrich clothianidin residues in river water, soil, tomatoes, grapes, and Chinese cabbage. The average recoveries of clothianidin spiked at 0.005 to 0.05 mg/L were 84.32 to 89.49% in river water with a relative standard deviation 2.22 to 4.79% (n = 3). The average recoveries of clothianidin spiked at 0.05 to 0.5 mg/kg were 85.49 to 96.36% in soil, grapes, Chinese cabbage, and tomatoes, with a relative standard deviation of 2.40 to 6.02% (n = 3). Overall, this study provides a sensitive and effective method for the accurate determination of clothianidin residues in environmental samples.     

Determination of tetracyclines in ovine milk by high-performance liquid chromatography with a coulometric electrode array system

A method has been developed to analyze residual tetracyclines (TCs) (oxytetracycline (OTC), tetracycline (TC), chlortetracycline (CTC), methacycline (MTC), doxycycline (DC)) in ovine milk, using high-performance liquid chromatography (HPLC) with a coulometric electrode array system. The samples were pretreated, using liquid-liquid extraction based on hexane. The chromatography was performed, using a C18 column (150 mm x 4 mm i.d. and 5 microm) with a mobile phase: sodium phosphate monobasic dihydrate (pH 2.2, 0.05 M)-acetonitrile (78:22, v/v). The flow rate of mobile phase was kept constantly at 1ml/min. The residues were monitored by an ESA electrochemical detector. Potentials of four electrodes in series were set at 400, 660, 680 and 700 mV, respectively. The first electrode was set to remove those interfering substances that may co-elute with TCs and the other three electrodes were used for quantification. The maximal potential of our detection was 700 mV. Calibration curve showed good linearity and the detection limit of TCs was 12.5, 20, 25, 10 and 25 ng/ml, respectively. Optimization of the pH of the mobile phase, the proportion of acetonitrile and the pH of the pretreatment were also performed. Recoveries of TCs from spiked samples were more than 88% and the relative standard deviations were less than 4.3%. This method was reliable, sensitive, economical and suited for routine monitoring of TC residues in ovine dairy milk.