时间分辨拉曼光谱研究一氧化氮与肌红蛋白的结合过程

纳秒瞬态拉曼光谱技术是研究分子结构变化超快动态过程的重要实验手段之一.而肌红蛋白(Mb)与小分子配体的结合过程一直是人们研究的焦点.本文旨在利用纳秒瞬态拉曼光谱技术研究小分子配体NO与肌红蛋白结合的动力学过程.通过考察MbNO光解后产物脱氧肌红蛋白(DeoxyMb)与反应物MbNO的ν4特征振动峰的强度比值随激光激发功率的变化,阐述了利用纳秒瞬态拉曼光谱技术研究MbNO体系中NO与DeoxyMb结合过程的可行性.利用纳秒瞬态拉曼光谱技术,获得了与皮秒时间分辨拉曼和皮秒时间分辨吸收相一致的结合动力学实验结果.为研究其它复杂体系的超快结合动力学过程提供了一种新的思路.     

显微拉曼光谱用于研究大气单颗粒表面非均相反应

大气单颗粒表面的非均相反应研究因更接近大气实际条件,避免了堆积态研究中人为引入的误差,能够得到真实的反应过程与机理,获得反映大气实际条件的动力学参数.本研究建立了使用显微拉曼光谱研究大气单颗粒非均相反应的研究方法,并初步用于研究NO2与单颗粒CaCO3的非均相反应.研究结果表明显微拉曼光谱可同时获得颗粒物的化学组成和形貌变化,并能得到化学环境如相态的信息,对于研究反应过程很有帮助;而颗粒物沉降在基质上得到的拉曼光谱因不受形貌共振影响,有利于获得高质量的光谱.此外,将拉曼光谱研究单颗粒的方法与其他单颗粒非均相反应的研究方法进行了综合比较,表明显微拉曼光谱技术在单颗粒非均相反应研究中具有重要的特点和应用价值.     

苯乙炔吸附在金电极上的现场表面增强拉曼光谱研究

采用电化学现场表面增强拉曼光谱研究了苯乙炔在金电极上的吸附行为及表面反应过程. 负电位下拉曼光谱的变化表明, 苯乙炔分子的炔端碳与金属电极成键, 分子垂直吸附于金电极表面. 在所研究的负电位区间内, 分子在电极表面的吸附取向并未随电位发生改变. 电化学现场光谱研究表明, 苯乙炔分子随电位负移, 碳碳叁键被加氢还原. 通过对比苯乙烯的现场表面增强拉曼光谱发现, 在－0.6 V至－1.2 V的电位区间内, 苯乙炔经过中间步骤生成苯乙烯, 最终被完全加氢为苯乙烷.     

暂态电化学表面增强拉曼光谱研究对硝基苯硫酚分子的电化学还原过程

对硝基苯硫酚是表面增强拉曼光谱研究中最常用的探针分子之一,对硝基苯硫酚在电极表面电化学还原反应的研究有助于对芳香族硝基化合物还原机理的认识. 本文应用暂态电化学-表面增强拉曼光谱技术,研究了对硝基苯硫酚在循环伏安和计时电流法过程中的表面增强拉曼光谱. 结果表明,实验实现了完全与电化学检测时间分辨率同步的表面增强拉曼光谱检测,以最快5毫秒的时间分辨率研究了对硝基苯硫酚分子在金电极表面的还原过程. 结果分析推测其此反应过程极快,在5毫秒的时间分辨率下仍难以捕获其中间物种. 本研究为人们更深层次研究和认识硝基苯类化合物电化学还原过程提供了参考和方向.     

电位扫描过程中NAD+在银电极上的原位表面增强拉曼光谱

利用共焦激光拉曼系统，原位测定了电位扫描过程中NAD^ 分子在银电极上的表面增强拉曼光谱的变化.通过分析0.4→-0.2→-0.4V电位区间的拉曼光谱的变化，推断由于NAD^ 分子中存在着具有空间旋转自由度的磷酸二酯键，分子中腺嘌呤和烟酰胺两结构单元在银电极上的吸附构型都随电位变化而发生改变.     

基于超微电极的原位电化学拉曼光谱

原位电化学拉曼光谱是一种重要的光谱电化学技术.基于超微电极的原位电化学拉曼光谱将拉曼光谱反映的结构信息与电极表面的电化学过程从实验上严格对应和关联,为深刻理解电化学反应机理提供依据.本文综述了采用超微电极作为工作电极的原位电化学拉曼光谱的研究方法和应用进展,总结了应用超微电极作为工作电极开展电化学拉曼光谱实验的方法和具有表面增强拉曼活性的超微电极制备方法,展示了如何利用在超微电极表面获得的拉曼光谱与界面电化学过程的严格关联研究单个锌颗粒电化学氧化过程、吡啶分子在Au电极表面的电化学吸附过程,以及如何利用该技术能以高的信噪比和灵敏度同时测量光电流与分子反应这一特性研究对巯基苯胺选择性光氧化反应.采用超微电极作为工作电极的原位电化学拉曼光谱技术极大拓展了拉曼光谱技术的研究范围,有望成为探索(光)电化学反应的有力工具.     

拉曼光谱在核领域研究中的应用

从核材料腐蚀就地实时监测、反应过程中核素形态表征、核环境化学极低核素浓度的分析、燃料后处理强放射性料液远距离测量等4个方面,综述了拉曼光谱在核领域中化合物分析研究中的应用现状,并指出拉曼光谱将成为未来放射性核素化合物分析表征的重要方法之一.     

用于电化学界面研究的共焦显微拉曼光谱技术(英文)

系统地介绍了将共焦显微拉曼光谱系统用于电化学界面研究的方法 ,包括铂电极的粗糙和电化学拉曼电解池的设计 .进行了铂上氢、氧和氯共吸附的拉曼光谱研究 .通过对甲醇氧化过程的现场跟踪 ,提出检测界面区溶液浓度变化和计算溶液 pH值的方法 .实验表明拉曼光谱技术可作为研究实际应用体系的重要工具 .     

高压下D,L-扁桃酸结构相变的拉曼光谱研究

采用金刚石对顶砧高压装置,在室温下对D,L-扁桃酸(C8H8O3)进行了原位高压拉曼光谱研究,实验最高压力为2.2 GPa.结果表明,原来的一些拉曼峰在0.6 GPa左右突然消失或者劈裂,并同时出现了一些新的拉曼峰.通过进一步分析D,L-扁桃酸的拉曼频率随压力的变化,发现许多拉曼峰的移动在0.6 GPa时都出现了拐点.D,L-扁桃酸在0.6 GPa发生了由正交相(Pbca)到单斜相(P21/c)的压致结构相变.通过分析相变前后晶体结构及拉曼振动模式的变化,认为此压致结构相变是由高压下分子的密堆积效应和氢键结构的重新排列导致.完全卸压至常压后,卸压拉曼光谱与常压拉曼光谱一致,表明此压致相变可逆.     

飞秒光学外差光学克尔效应和低频拉曼光谱技术研究离子液体[bmim][PF6]的低频光谱

利用飞秒光学外差光学克尔效应技术获得了咪唑类离子液体1-丁基-3-甲基咪唑六氟磷酸盐([bmim][PF6])体系中反映分子间相互作用的低频光谱. 结果分析中, 利用Brownian振子时间相关函数的精确表达式对光学克尔效应动力学数据中的核振动部分进行模拟, 在时域上获得各个振动组分的时间演化行为, 并进而通过快速Fourier变换获得各个振动组分的频域光谱和总加和光谱. 此外还利用低频拉曼光谱技术测量了离子液体[bmim][PF6]的低频光谱, 并和飞秒光学外差光学克尔效应实验的结果进行对比, 发现两种方法获得的低频光谱相近. 实验结果表明Brownian振子时间相关函数的精确表达式可用来解析离子液体体系中低频振动的时间演化行为.     

Monitoring Microgel Synthesis by Copolymerization of N‐isopropylacrylamide and N‐vinylcaprolactam via In‐Line Raman Spectroscopy and Indirect Hard Modeling

Functionalized microgels are typically based on structured copolymers, whose synthesis necessitates knowledge of interactions between different monomer units. This contribution presents in‐line Raman and turbidity monitoring of copolymer microgels based on monomers N‐vinylcaprolactam (VCL) and N‐isopropylacrylamide (NIPAM). During reaction, in‐line Raman spectra are evaluated via multivariate indirect hard modeling (IHM) regression, utilizing pure component models based on parameterized peak functions. To account for variation in Raman baseline intensity, the linear IHM baseline is replaced by a curved baseline, resulting in calibration R² above 0.98 and root‐mean‐squared errors of cross‐validation below 0.12 wt%. Spectra taken in‐line during microgel syntheses reveal NIPAM to react slower than VCL in homopolymerization, but faster than VCL in copolymerization. This effect can be used for synthesis of functional microgels, that is, with tunable volume phase transition temperature. This effect is not visible from turbidity measurements, demonstrating the advantage of in‐line Raman monitoring of chemical components in polymerization processes.     

金刚石膜微结构的慢正电子束测量研究

The microstructure of diamond films was studied by slow positron beam and Raman spectroscopy. For the Raman spectroscopy experiment on diamond films, a high fraction of the sp3 hybridized bond was detected in samples. Positron annihilation spectra analysis further illuminated that the concentration and types of defects were different in each sample. S-E curves of all samples showed that diamond crystal structures had obvious variation in each sample. These results indicated that positron annihilation spectroscopy was an effective means to measure microstructure of diamond films.     

New trends in telescopic remote Raman spectroscopic instrumentation

Raman spectroscopy is a powerful analytical technique in many areas of research for several reasons. These include the sensitivity to small structural changes, non-invasive sampling capability, minimal sample preparation, narrow line widths of Raman lines, and high spatial resolution in the case of micro-Raman spectroscopy. Advancements in lasers, spectrographs and holographic optical components have made Raman spectroscopy an effective tool for analyzing natural and synthetic materials. These advances have led to the development of both in situ Raman spectroscopy and telescopic remote Raman spectroscopy for a lander or rover for planetary exploration. A telescopic Raman spectroscopic system capable of measuring Raman spectra of minerals, inorganic and organic chemicals, and biogenic materials to radial distances in the range 10-100 m has been developed. In this work, the author reviews the current status of telescopic remote Raman spectroscopic instrumentation and examines new trends in the field of remote Raman spectroscopy and its combination with time-resolved remote laser-induced native fluorescence (LINF) and laser-induced breakdown spectroscopy (LIBS), and their applications in earth and planetary science.     

The synthesis of nanocrystalline anatase and rutile titania in mixed organic media

The synthesis of anatase and rutile titania could be achieved in mixed organic media with the variation of alcohols in the media under mild conditions. Although a nonhydrolytic process cannot be excluded, it is suggested that the formation of titania in these systems is based mainly on the hydrolytic process initiated by the water generated as a result of an esterification reaction between the alcohols and acetic acid. It has been found that the phase of the TiO2 produced depends on the choice of alcohols and temperature. Partial morphology and size are also affected by these factors. It is proposed that the viscosity and pressure of the reaction media influence the particle size. X-ray diffraction, transmission electron microscopy, Raman spectroscopy, and UV-visible adsorption spectroscopy were employed to characterize the final products.     

Analysis of human tear fluid by Raman spectroscopy

Tear fluid is a complex aqueous solution containing proteins, metabolites, electrolytes and lipids. This study uses Raman spectroscopy to analyse the composition of human tear fluid from three healthy volunteers. Two different methods are used to obtain Raman spectra from the 3 μL tear samples: (i) solution-phase Raman spectroscopy, and (ii) drop coating deposition Raman spectroscopy (DCDRS). Tear samples were either basal fluid, or yawn reflex secreted fluid. Calibration of the solution technique with standard protein solutions (5-15 mg mL⁻¹) showed that this method could predict the protein concentration (cross-validation) with an error of less than 1 mg mL⁻¹. The Raman signals from the tear fluid were very weak but signals due to protein and urea were clearly observable in all samples. The drop coating deposition technique was shown to produce very high signal-to-noise spectra for relatively short acquisition times, and small sample volumes. Raman point mapping combined with principal components analysis showed that the protein, urea, bicarbonate and lipid could all be detected in the tear samples and that the distribution of these components was inhomogeneous. Their position within the drying pattern was shown to depend on their relative solubilities. The results of this study suggest that solution Raman measurements may be calibrated to give the total tear protein concentration and DCDRS could be used to give a fingerprint of the tear protein (and lipid) composition.     

Development and validation of an at-line fast and non-destructive Raman spectroscopic method for the quantification of multiple components in liquid detergent compositions

Implementation of process analytical technology (PAT) tools in the manufacturing process of liquid detergent compositions should allow fast and non-destructive evaluation of the product quality. The aim of this study was to develop and validate a rapid method for quantifying the chemical compounds of five washing liquid precursors. Raman spectroscopy was applied in combination with a two-step multivariate modeling procedure. In first instance, a SIMCA (Soft Independent Modeling of Class Analogy) model was developed and validated, allowing the distinction between the different laundry detergents. Once the product was correctly identified, it was aimed at predicting the concentration of its individual components using partial least squares (PLS) models. Raman spectra were collected at-line with a total acquisition time of 20 s, using a non-contact fiber-optic probe.     

Au nanorod arrays tailored for surface-enhanced Raman spectroscopy.

We have demonstrated surface-enhanced Raman spectroscopy (SERS) on arrays of Au nanorods aligned in line by a dynamic oblique deposition technique. For light polarized along the major axes of the nanorods, the plasma resonance of the Au nanorods has been tuned to a wavelength suitable for Raman spectroscopy. Raman scattering on the discrete nanorods is significantly enhanced compared with that on semicontinuous Au films. Since the preparation process is physically bottom-up, it is robust in its selection of the materials and is useful for providing SERS sensors at low cost.     

从分子碎片到活性位：分子筛催化材料的原位、共振紫外拉曼光谱研究

在过去的近十年中,各种新型原位表征技术和反应器设计被应用于多相催化过程和催化材料的合成研究中,并获得了许多新认识．特别是最近几年,利用原位、共振拉曼光谱技术对分子筛合成关键物种检测、杂原子分子筛催化活性位的研究取得了一系列进展．这些技术的应用使得从分子水平认识复杂的多孔材料成为可能：从合成初期碎片基元检测、碎片相互连接的关键化学键到预组装类微孔结构;从高度隔离过渡金属中心到配位化学键断裂生成活性中间物种,再到完成催化反应循环．这为设计特定功能和结构的催化材料及高选择性的活性中心奠定了坚实的基础．     

Continuous Synthesis of Hydrogenated Graphene in Thermal Plasma

A single-stage catalyst free synthesis of hydrogenated graphene was studied in the process of methane conversion in a helium plasma jet created by a plasma torch at the power up to 45 kW and the pressure of 710 Torr. The synthesis products were studied by the methods of scanning and transmission electron microscopy, thermal analysis, Raman spectroscopy, X-ray photoelectron spectroscopy, and X-ray diffraction analysis.