罗丹明B分子印迹固相萃取小柱的研制及应用

研制一种对罗丹明B具有特异性识别性能的分子印迹固相萃取小柱。用沉淀聚合法制备罗丹明B分子印迹聚合物,通过静态平衡吸附实验及固相萃取实验表征其性能,并对市售辣椒样品中的罗丹明B进行测量。罗丹明B模板聚合物的吸附能力明显优于空白聚合物;印迹固相萃取小柱对罗丹明B标准溶液(0.05 mmol/L)一次性萃取率为98.24%,实际样品测量的回收率为90.0%~95.0%,测定结果的相对标准偏差为0.9%~1.7%(n=3)。罗丹明B分子印迹固相萃取小柱选择性好、萃取率高,可应用于食品、化妆品检测等相关领域。     

分子印迹固相萃取牛奶中甲胺磷

以甲胺磷为印迹分子、α-甲基丙烯酸为功能单体及三羟甲基丙烷三丙烯酸酯为交联剂,通过悬浮聚合法制备甲胺磷分子印迹聚合物(MIP)微球,并用该聚合物进行了牛奶中甲胺磷残留的固相萃取研究.静态吸附实验表明,在结构相似物乙酰甲胺磷和水胺硫磷为竞争底物存在下,MIP对甲胺磷有良好的吸附识别能力.在优化条件下,印迹分子的固相萃取回收率达96.4%,能够用于甲胺磷的富集,而空白聚合物却不具备这样的特性.当实际牛奶样品中甲胺磷、乙酰甲胺磷和水胺硫磷加标水平为100μg/kg时,甲胺磷回收率达87.4%,乙酰甲胺磷和水胺硫磷的回收率低于15%.结果表明分子印迹固相萃取对甲胺磷有很好的专一选择性,且回收率能够满足农药残留分析要求.在相同实验条件下,与C18固相萃取柱进行比较,分子印迹固相萃取的选择性及样品净化能力优势明显.     

具有高选择性吸附的表面分子印迹磁性纤维素微球的制备与性能

以纤维素和纳米Fe₃O₄为原料制得磁性纤维素微球, 在纤维素微球表面选择合适的模板分子, 以甲基丙烯酸、 丙烯酰胺和N,N'-亚甲基双丙烯酰胺为功能单体, 采用水溶液聚合法制得表面分子印迹磁性纤维素微球. 采用傅里叶变换红外光谱(FTIR)、 X射线衍射(XRD)和振动样品磁强计(VSM)等表征了分子印迹聚合物微球的结构. 以罗丹明B(RhB)为模板分子, 通过吸附动力学与吸附热力学实验研究了表面分子印迹磁性纤维素微球对RhB的吸附性能, 结果表明, 制备的表面分子印迹磁性纤维素微球对罗丹明B具有特异性识别作用, 饱和吸附量达到0.542 mg/mg, 吸附平衡时间为10 h左右. 表面分子印迹磁性纤维素微球大大降低了对吸附环境的依赖, 并可重复利用.     

对羟基苯甲酸印迹聚合物微粒的制备及其固相萃取应用

以对羟基苯甲酸(p-HBA)为模板分子,丙烯酰胺(AM)为功能单体,乙二醇二甲基丙烯酸酯为交联剂,采用沉淀聚合法在乙腈溶剂中制备了p-HBA印迹聚合物微粒,研究了p-HBA加入量及聚合反应体系的总浓度对印迹聚合物结合性能的影响,采用色谱法对其进行了评价。结果表明,p-HBA的加入量及反应体系的总浓度对结合性能均有影响,当p-HBA加入量为1.0 mmol(与AM物质的量比为1:2)时,在37.5 mL乙腈中制得印迹聚合物P₂对p-HBA具有高的亲和力(k'=4.01)和选择性。将印迹聚合物P₂作为固相萃取填料,研究了分子印迹固相萃取p-HBA的方法,测得2种不同载样模式下p-HBA的柱容量分别为6.91 μg/100 mg和1.93 μg/100 mg,测得天麻样品中p-HBA的加标回收率为76.8%~86.6%(RSD=3.4%~6.2%)(n=3)。结果表明,采用沉淀聚合法以AM为功能单体制备的p-HBA印迹聚合物微粒适宜作为固相萃取填料,可实现天麻样品中p-HBA的选择性分离净化。     

沉淀聚合法制备3-吲哚乙酸印迹聚合物微粒及其固相萃取应用

以3-吲哚乙酸(IAA)为模板分子、丙烯酰胺(AA)为功能单体,采用沉淀聚合法制备了IAA印迹聚合物微粒,研究了致孔剂乙腈的用量及IAA的加入量对印迹聚合物结合性能的影响,采用色谱法对其进行评价。结果表明,当乙腈为37.5 m L,IAA为2 mmol(与AA物质的量比为1∶1)时,制得印迹聚合物P7对IAA的亲和力最大(k=4.24),印迹因子(IF)为14.1,其对IAA展示了最显著的特异识别能力。将P7作为固相萃取柱的填料,研究了分子印迹固相萃取IAA的方法,测得绿豆芽样品的加标回收率为90.6%~92.6%。结果表明,以AA为功能单体沉淀聚合法制备的IAA印迹聚合物颗粒适合作为固相萃取柱填料,可实现实际样品中IAA的选择性分离净化。该文提出的采用适当增大模板分子加入量的方法是制备高亲和力与高选择性印迹聚合物的一条新途径。     

分子印迹固相萃取检测罐装食品中双酚A

以双酚A为模板分子,3-氨基丙基乙氧基硅烷为功能单体,通过溶胶-凝胶反应合成双酚A分子印迹纳米硅胶微球。以印迹微球为固相萃取吸附剂,优化固相萃取条件,确定二氯甲烷为上样溶剂。固相萃取选择性实验表明,在双酚A及其结构类似物四溴双酚A、双酚C、壬基酚的混合物溶液中,印迹萃取柱对双酚A具有良好的选择性能,回收率达到90.7%。浓度为2.5和5μmol/L的加标罐装食品样品,经印迹萃取柱预处理,液相色谱检测得到回收率72%～84%,相对标准偏差2.9%～4.4%。     

分子印迹聚合物纤维固相微萃取-高效液相色谱法测定水中痕量2,4-二氯苯酚

利用分子印迹固相微萃取-高效液相色谱法测定了水中痕量的2,4-二氯苯酚(2,4-DCP)。在石英毛细管中,以2,4-DCP为模板分子,甲基丙烯酸(MAA)为功能单体,聚合反应合成了2,4-DCP分子印迹聚合物纤维,考察模板分子的浓度,功能单体与交联剂的比例,聚合反应时间对制备分子印迹聚合物纤维的影响,优化了2,4-DCP的吸附时间对分子印迹聚合物纤维萃取效率的影响。高效液相色谱法测定了萃取后标准样品溶液中2,4-DCP的含量萃取率大于80%,方法的线性范围为10~120μg/L,检出限为2.5μg/L,相关系数(R2)在0.9993~0.9995之间,实测了自来水、湖水和工业废水水样,加标回收率为91.4%~106.0%,相对标准偏差为1.4%~6.6%。     

虚拟分子印迹固相萃取技术检测食品中10种三嗪类除草剂残留

以正丁基三聚氰胺为虚拟模板,α-甲基丙烯酸为功能单体,乙二醇二(甲基丙烯酸)酯为交联剂,采用悬浮聚合法制备得到对三嗪类除草剂具有高选择性的分子印迹聚合物。运用分子模拟技术探讨了虚拟模板的筛选方法;利用高效液相色谱法考察了印迹聚合物对三嗪类除草剂的选择吸附性;以此聚合物作为固相萃取填料,研究了分离、富集食品中三嗪类除草剂的最佳萃取条件。与其它固相萃取柱相比,所制备的分子印迹固相萃取柱对三嗪类除草剂有较好的分子识别能力,能有效降低基质效应。基质加标三嗪类除草剂回收率为87.8%～105.2%;相对标准偏差(RSD)均小于13%(n=6)。     

橄榄醇分子印迹聚合物的制备及评价(英文)

以橄榄醇为模板分子,α-甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酸酯(EDMA)为交联剂,甲苯和十二醇为溶剂,通过本体聚合法制备了橄榄醇分子印迹聚合物。利用平衡结合实验、扫描电镜(SEM)及红外光谱(FTIR)对分子印迹聚合物(MIP)进行了表征,并用该聚合物进行了加标麦麸中橄榄醇的固相萃取(SPE)研究。平衡结合实验表明MIP对模板分子具有更好的识别性。Scatchard分析表明对橄榄醇分子的吸附存在2类不同结合位点,其中高亲和力结合位点和低亲和力结合位点的解离常数分别为0.021和1.002 mmol/L,相应的最大表观结合量分别为18.74和135.9 μmol/g。在优化的固相萃取条件下,MIP固相萃取柱对加标麦麸中橄榄醇的回收率达到97.8%~98.8%,相对标准偏差为2.8%~4.2%(n=5),线性范围为0.1~100 mg/L,检出限(S/N=3)为0.062 mg/L。与非印迹聚合物(NIP)柱及市售聚苯乙烯/二乙烯基苯(PLS)柱相比,MIP柱的选择性更强,回收率更高,纯化效果更好。     

三嗪类农药类特异性分子印迹聚合物的合成及其应用

以莠去津为模板,甲基丙烯酸为功能单体,三羟甲基丙烷三甲基丙烯酸酯为交联剂,采用本体聚合法制备了一种对5种三嗪类农药及其3种主要代谢物选择性好、吸附能力强的类特异性分子印迹聚合物,并建立了玉米、小麦及棉花样品中该8种农药的分子印迹固相萃取/高效液相色谱-串联质谱(MISPE/HPLCMS/MS)检测方法。筛选了模板分子与功能单体的配比,表征了印迹聚合物的形态,研究了印迹聚合物及以其为填料的固相萃取柱对三嗪类农药的识别特性。结果表明,印迹聚合物对模板分子及其结构类似物具有很强的亲和力与类特异性,其固相萃取小柱具有很好的选择性和净化能力。在玉米、小麦及棉花等实际样品中8种三嗪类农药的加标回收率为61.1%~107.6%,相对标准偏差(RSD)小于11%,检出限(S/N=3)为0.4~8.1μg/kg。此方法可用于实际样品的常规监测。     

磁性热敏聚合物微球的制备及磁感应控制释放行为

采用种子乳液聚合法在Fe3O4纳米粒子表面聚合包覆N-异丙基丙烯酰胺(NIPAM)与α-甲基丙烯酸(MAA)的共聚物,制备了磁性热敏聚合物微球Fe3O4/P(NIPAM-co-MAA).利用广角X射线衍射仪(WAXD)、透射电子显微镜(TEM)、zeta粒度仪(DLS)、热重分析(TGA)、振动样品磁力计(VSM)及比表面积测试仪(BET)等对微球的结构与形貌进行了表征,通过紫外-可见光分光光度法(UV-Vis)研究了微球对水溶性模型药物罗丹明B(RhB)的负载和磁感应控制释放行为.结果表明,微球粒径为80～200 nm,比表面积约为30.04m2/g,平均孔径约为24.50 nm;微球中聚合物含量约为73 wt%,磁粒子含量约为20 wt%,饱和磁感应强度为16.49 emu/g,其体积相转变温度(VPTT)约为37.5℃.RhB在微球中的装载量可以达到16.38 mg/g;在外加交变磁场作用下,RhB在模拟肠液和胃液中的磁感应释放量分别达到10.47和13.02 mg/g.     

Novel Bi/BiOBr/AgBr composite microspheres: Ion exchange synthesis and photocatalytic performance

Novel Bi/BiOBr/AgBr composite microspheres were prepared by a rational in situ ion exchange reaction between Bi/BiOBr microspheres and AgNO₃. The characteristic of the as-obtained ternary microspheres was tested by X-ray diffraction (XRD), energy dispersive X-ray spectrometer (EDS), scanning electron microscope (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), UV–vis diffuse reflectance spectroscopy (UV–vis DRS) and photoluminescence (PL). Under visible light irradiation, Bi/BiOBr/AgBr microspheres exhibited an excellent photocatalytic efficiency for rhodamine B (RhB) degradation, which was about 1.4 and 4.9 times as high as that of Bi/BiOBr and BiOBr/AgBr, demonstrating that the highest separation efficiency of charge carriers in the heterostructured Bi/BiOBr/AgBr. The photocatalytic activity of Bi/BiOBr/AgBr microspheres just exhibited a slight decrease after three consecutive cycles. The photocatalytic mechanism investigation confirmed that the superoxide radicals (O₂^•−) were the dominant reactive oxygen species for RhB degradation in Bi/BiOBr/AgBr suspension.     

Microstructural reorganization and cargo release in pyrene urethane methacrylate random copolymer hollow capsules

We report the synthesis of polymer microcapsules by direct one-pot free radical random copolymerization approach. Urethane methacrylate comb monomers having pendant pyrene (Py) and 3-pentadecyl phenol (PDP) units were copolymerized in a random manner using benzoyl peroxide (BPO) as free radical initiator in dimethylformamide (DMF) as solvent. These copolymers and corresponding homopolymers spontaneously self-organized into microspheres upon drop casting from solvents like DMF and tetrahydrofuran (THF). Stable microspheres were obtained in water by dialyzing THF solution of the polymers against water in dialysis bags with molecular weight cutoff of ～2000. The hollow nature of the spheres was confirmed by rhodamine B (RhB) encapsulation followed by F?rster resonance energy transfer (FRET) based fluorescence emission from RhB upon exciting pyrene. The microenvironment inside the capsule was probed by following the I(1)/I(3) ratio of pyrene emission as well as RhB release as a function of temperature. The RhB encapsulated in the pyrene homopolymer PIHP-100Py capsules experienced strong donor-acceptor interaction and did not undergo complete release even at high temperature (85 °C). The encapsulated RhB from the copolymers with low pyrene incorporation was released almost fully upon heating beyond 50 °C. Pyrene moieties in the PIHP-100Py were shielded from surrounding water and experienced a hydrophobic environment, whereas in the low pyrene incorporated copolymer the PDP units were better shielded from the hydrophilic environment. This work represents a simple approach to produce polymer hollow capsules, and the varying pyrene incorporation was used to trace the microenvironment inside the capsules.     

BiOBr hierarchical microspheres: Microwave-assisted solvothermal synthesis, strong adsorption and excellent photocatalytic properties

Two kinds of BiOBr nanosheets-assembled microspheres were successfully prepared via a facile, rapid and reliable microwave-assisted solvothermal route, employing Bi(NO(3))(3)·5H(2)O and cetyltrimethylammonium bromide (CTAB) as starting reagents in the absence or presence of oleic acid. The phase and morphology of the products were characterized by powder X-ray diffraction (XRD), energy dispersive spectrometry (EDS), selected area electron diffraction (SAED), high resolution transmission electron microscopy (HRTEM) and scanning electron microscopy (SEM). Experiments indicated that the formation of these building blocks of microspheres could be ascribed to the self-assembly of nanoparticles according to mesocrystal growth mode. Interestingly, both samples exhibited not only strong adsorption abilities, but also excellent photocatalytic activities for methyl orange (MO), rhodamine B (RhB) and phenol. The resulting BiOBr hierarchical microspheres are very promising adsorbents and photocatalysts for the treatment of organic pollutants.     

ZnO/BiOI微球的合成及其光催化性能

通过一步溶剂热法合成ZnO/BiOI纳米复合材料,在Bi（NO₃）₃·6H₂O、KI、ZnO和乙二醇（EG）溶剂中,制备出的样品尺寸和形貌采用X射线粉末衍射（XRD）、场发射扫描电镜（FESEM）、高分辨透射电镜（HRTEM）、紫外-可见漫反射光谱（DRS）、X射线光电子能谱（XPS）、N₂吸附-脱附等,对实验所得产物的组成、结构及光学性质等进行表征。以染料罗丹明B（RhB）水溶液和气态乙醛作为降解对象,采用BiOI、ZnO/BiOI和ZnO微纳材料作为光催化剂,通过对BiOI、ZnO/BiOI和ZnO微纳材料在可见光下光催化降解染料罗丹明B（RhB）水溶液和气态乙醛,结果表明多孔微纳材料的ZnO/BiOI具有更高的降解效率,实验表明多孔微纳材料的ZnO/BiOI具有更高的氧空位浓度,因此使其催化活性增强,讨论了其可能的催化活性机理。     

ZnO/BiOI微球的合成及其光催化性能

通过一步溶剂热法合成ZnO/BiOI纳米复合材料,在Bi（NO₃）₃·6H₂O、KI、ZnO和乙二醇（EG）溶剂中,制备出的样品尺寸和形貌采用X射线粉末衍射（XRD）、场发射扫描电镜（FESEM）、高分辨透射电镜（HRTEM）、紫外-可见漫反射光谱（DRS）、X射线光电子能谱（XPS）、N₂吸附-脱附等,对实验所得产物的组成、结构及光学性质等进行表征。以染料罗丹明B（RhB）水溶液和气态乙醛作为降解对象,采用BiOI、ZnO/BiOI和ZnO微纳材料作为光催化剂,通过对BiOI、ZnO/BiOI和ZnO微纳材料在可见光下光催化降解染料罗丹明B（RhB）水溶液和气态乙醛,结果表明多孔微纳材料的ZnO/BiOI具有更高的降解效率,实验表明多孔微纳材料的ZnO/BiOI具有更高的氧空位浓度,因此使其催化活性增强,讨论了其可能的催化活性机理。     

Controllable synthesis and visible-light-responsive photocatalytic activity of Bi2WO6 fluffy microsphere with hierarchical architecture

Bismuth tungstate (Bi(2)WO(6)) has attracted great research interest as an important visible-light-responsive photocatalyst. In this paper, we report a facile hydrothermal route for the shape-controlled synthesis of micro/nanostructured Bi(2)WO(6), without adding surfactants or templates. The results show that various morphologies of Bi(2)WO(6) including coralloid spherical particles, packed nanosheets, fluffy microspheres, and plates can be obtained by adjusting the pH values of the precursors. The as-prepared porous fluffy microspheres with a hierarchical architecture synthesized at pH 8 exhibit the highest photocatalytic activity for the degradation of Rhodamine (RhB) under visible light irradiation. The photodegradation efficiency reaches as high as 99% within 20 min irradiation. This enhanced photocatalytic activity can be attributed to the unique porous structure and high BET surface area of fluffy microspheres with hierarchical architecture.     

Hydrothermal synthesis and photocatalytic property of porous CuO hollow microspheres via PS latex as templates

Porous copper oxide (CuO) hollow microspheres have been fabricated through a simple hydrothermal method using PS latex as templates. The as-obtained samples were characterized by means of scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffractometry (XRD) and Fourier transform infrared spectroscopy (FTIR). The influences of the mole ratio of Ethylenediamine (C₂H₈N₂) and copper acetate (Cu(Ac)₂·H₂O), hydrothermal temperature and time on the size and morphologies of the final products have been investigated. The possible formation mechanism of porous CuO hollow microspheres has been proposed and the specific surface area of the hollow microspheres with 81.71 m²/g is measured by BET method. The band gap value calculated from a UV–vis absorption spectrum of porous CuO hollow microspheres is 2.71 eV. The as-synthesized product exhibits high photocatalytic activity during the photodegradation of an organic dyestuff, rhodamine B (RhB), under UV-light illumination.     

CTAB-assisted synthesis and photocatalytic property of CuO hollow microspheres

CuO hollow microspheres have been fabricated through a simple hydrothermal method in the presence of cetyltrimethylammonium bromide (CTAB). The products were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy. The effects of reaction temperature, surfactant, and the molar ratio of Urea/Cu(Π) on the morphologies of the resulting products were investigated. The possible formation mechanism of CuO hollow dandelion-like architectures was proposed. The hierarchical CuO hollow microspheres exhibited a high photocatalytic activity for decolorization of Rhodamine B (RhB) under UV-light illumination.     

ZnO@P(AA/MMA/GMA)@Fe3O4复合微球：制备及光催化性能

采用导向沉淀法在胺化的P(AA/MMA/GMA)@Fe3O4(MCM,其中AA为丙烯酸,MMA为甲基丙烯酸甲酯,GMA为甲基丙烯酸缩水甘油酯)微球表面负载ZnO粒子制备得到了ZnO@P(AA/MMA/GMA)@Fe3O4(ZPM)三层结构磁性复合微球。通过XRD、SEM、粒度分析、TGA及VSM等手段对ZPM微球进行表征,结果表明:ZPM微球平均粒径为1.38μm,ZnO负载量为13.02%,比饱和磁化强度为8.64 emu.g-1。同时研究了ZPM微球的光催化性能,以罗丹明B(RhB)为被降解物,微球对RhB的吸附效率为50.07%,催化降解效率可达93.40%。