Development of a capillary electrophoresis method for the enantioselective estimation of primaquine in pharmaceutical formulations

A capillary electrophoresis (CE) method has been developed that allows the separation and estimation of primaquine enantiomers using hydroxypropyl-gamma-cyclodextrin (HP-gamma -CD) as a chiral selector. The influence of chemical and instrumental parameters on the separation, such as type and concentration of CD, buffer concentration, buffer pH, applied voltage, capillary temperature, and injection time, were investigated. Good separation of the racemic mixture of primaquine was achieved using a fused-silica capillary (52.5 cm effective length x 50 microm id) and a background electrolyte composed of tris-phosphate buffer solution (50 mM, pH 2.5) containing 15 mM HP-gamma-CD as a chiral selector. The recommended applied voltage, capillary temperature, and injection time were 15 kV, 25 degrees C, and 6 s, respectively. Within-day and interday reproducibility of peak area and migration time gave relative standard deviation values ranging from 1.05-3.30%. Good recoveries (range of 96.8-104.9%) were obtained from the determination of placebos that were spiked with 0.25-1.00 mg/L primaquine. The proposed CE method was successfully applied to the assay of primaquine diphosphate in pharmaceutical formulations (tablets).     

Preparation and evaluation of an imidazole-coated capillary column for the electrophoretic separation of aromatic acids

An imidazole-coated capillary column for electrophoresis has been prepared by means of organosilanization. With mesityl oxide as neutral marker, the results indicated that the electroosmotic flow of the bonded phase displays a dramatic difference in pH dependence in comparison with that of the bare fused-silica column. The presence of positive charges on the coating surface and the anionic exchange property, due to the cationic property of the imidazole group at pH values below 6, allows the separation of geometric isomers that are very similar in ionic mobility. Separation parameters including buffer composition and concentration, pH, applied voltage, and the influence of other additives were investigated. By using acetate buffer (100 mM, pH 5.2) and an applied voltage of -15 kV with UV detection at 212 nm, the separation of 11 aromatic acids including mono-, di-, tri- and tetra-carboxylic acids could be achieved in less than 14 min. The average plate number was 3 x 10(5)/m. With acetate buffer (25 mM, pH 5.5) and an applied voltage of -25 kV, the addition of silver nitrate or beta-cyclodextrin significantly improved the resolution of some more highly charged carboxylic acids.     

Fourier transform infrared spectroscopy with a sample deposition interface as a quantitative detector in size-exclusion chromatography

Micellar electrokinetic capillary chromatography was developed to analyze plant hormones including gibberellic acid, abscisic acid, indole-3-acetic acid, alpha-naphthaleneacetic acid, 2,4-dichlorophenoxyacetic acid, kinetin-6-furfurylaminopurine and N6-benzyladenine. The influences of some crucial parameters including buffer concentration, pH value, micelle concentration and applied voltage on electrophoretic separation were investigated. Under optimum conditions (50 mM borate as the running buffer containing 50 mM sodium dodecylsulfate, pH 8.0; separation voltage: -15 kV; injection: hydrodynamic injection, 5 s at 50 mbar; temperature: 25 degrees C), a complete separation of seven plant hormones was accomplished within 30 min. Emphasis was placed on improving detection sensitivity in order to detect small amounts of hormones in plant tissue. Multiple wavelength detection and expanded bubble cell capillary were used with enrichment factors of 2 and 3, respectively. In addition, an on-line concentration method of large volume sample stacking was designed. Enrichment factors of up to approximately 10-600 were achieved for these hormones with detection limits down to 0.306 ng/ml. The method was successfully applied to analyzing abscisic acid in flowers of transgenic tobacco.     

Enantioselective analysis of ofloxacin enantiomers by partial-filling capillary electrophoresis with bacteria as chiral selectors

The enantiomeric separation of ofloxacin enantiomers (OFLX) was achieved by using capillary electrophoresis partial-filled with Escherichia coli, Pseudomonas aeruginosa (Gram-negative), and Staphylococcus aureus (Gram-positive) as chiral selectors. Experimental parameters, including the concentration of background electrolyte, applied voltage, length of the filled bacteria plug, and pH of the buffer, were intensively investigated. Baseline separation of OFLX could be achieved within 7 min by using E. coli and P. aeruginosa as chiral selectors under the following conditions: electrophoretic buffer composed of 10 mM phosphate buffer at pH 7.4, applied voltage at 15 kV, and the bacteria (6.0 × 10(8) cells/mL) were injected into the capillary by gravity with injection height of 17.5 cm for 180 s (E. coli), 300 s (P. aeruginosa), and 300 s (S. aureus), respectively. E. coli and P. aeruginosa had better chiral selectivity for OFLX than S. aureus, which was in good agreement with OFLX having better antimicrobial activity on Gram-negative rather than Gram-positive bacteria. A novel method was developed for the enantioselective separation of enantiomers using bacteria as chiral selectors, which provides a new approach for antimicrobials enantioselective analysis, chiral pharmacodynamics, and chiral pharmacokinetics studies.     

Optimization of the separation of phenolic compounds by micellar electrokinetic capillary chromatography

A group of phenolic compounds including phenolic aldehydes, acids and flavonoids are separated by micellar electrokinetic chromatography (MECC). The influence of buffer (concentration and pH), concentration of sodium dodecylsulphate (SDS) and applied voltage were studied. To increase the selectivity of the separation and the resolution of the solutes organic solvents are added to the separation buffer, the best results were obtained when methanol was used at lower percentages. An optimized buffer (150 mM boric acid (pH 8.5)-50 mM SDS-5% methanol) provides the optimum separation with regard to resolution and migration time. This method was applied to the determination of these compounds in wine samples with good results.     

Improved method for the simultaneous determination of whey proteins, caseins and para-kappa-casein in milk and dairy products by capillary electrophoresis

A capillary electrophoresis method for the simultaneous determination of whey proteins, caseins and their degradation products, such as para-kappa-casein, was proposed. The effect of several parameters (pH, ionic strength and concentration of urea in the electrophoresis buffer and applied voltage) on the analysis time and on the separation efficiency of the major milk proteins was studied. Using a hydrophilically coated capillary, in combination with electrophoresis buffer 0.48 M citric acid-13.6 mM citrate-4.8 M urea at pH 2.3, and a separation voltage of 25 kV, a complete separation of beta-lactoglobulin and para-kappa-casein was achieved, permitting the quantification of both components.     

咖啡因及其9种类似物的胶束电动毛细管分析研究

 以十二烷基硫酸钠 (SDS)胶束为准固定相 ,考察了咖啡因及其 9种类似物在胶束电动毛细管 (MECC)分离模式下的分离行为。研究了运行缓冲液的 pH值、磷酸盐浓度、SDS浓度、甲醇体积分数、分离电压、分离温度等因素对这 10种化合物的迁移时间和分离效果的影响。结果发现 ,这些因素对上述 10种化合物的分离有显著的影响 ,尤以pH值为最。它不仅影响化合物的迁移时间和分离效率 ,还改变其出峰顺序 ,这与碱性条件下化合物仲胺基上氢的电离有关。优化后的分离条件 :运行缓冲液为 2 0mmol/L磷酸盐 2 0mmol/LSDS(pH 11 0 ) ,分离电压为2 5kV。     

Separation and determination of enkephalin-related peptides using capillary electrophoresis

CZE with UV-absorption detection has been used for the separation and determination of enkephalin-related peptides. The experimental conditions, such as pH and concentration of running buffer, applied voltage, injection method, and time, were investigated in detail. Excellent separation efficiency could be obtained for ten enkephalin-related peptides with a 50 microm (ID) x 58 cm capillary using sodium dihydrogen phosphate as the running buffer (pH 3.11) when 20 kV of applied voltage was used. The concentration detection limits were found to be in the range of 0.31-1.94 microg/mL (defined as S/N = 3). The proposed method has been applied to analyze the spiked cerebrospinal fluid (CSF) sample, and the results showed that CZE is a powerful technique for separation and detection of the above biological peptides.     

Simultaneous determination of dihydroxybenzene positional isomers by capillary electrochromatography using gold nanoparticles as stationary phase

The paper describes the enhanced separation of o-, m-, p-dihydroxybenzene by capillary electrochromatography (CEC) using gold nanoparticles (AuNPs) as stationary phase. The effect of the AuNPs concentration upon separation was investigated. The experimental parameters, including separation voltage, pH, and concentration of running buffer, were optimized. Under the optimum conditions, a good resolution of three dihydroxybenzene isomers was obtained within 15 min in a 50 cm effective length capillary modified with 0.02 nmol/L AuNPs at a separation voltage of 16 kV in a 50 mmol/L acetate buffer (pH 5.0). The linear ranges were from 10(-6) to 10(-4) mol/L and the detection limits were as low as 10(-7) mol/L. This method was successfully used to analysis two kinds of hair coloring agent sample with recoveries in the range of 90-105% and relative standard deviations (RSD) less than 5.0%.     

微乳电动毛细管色谱法分离检测酱油中的氯丙醇

建立了微乳电动毛细管色谱分离3种氯丙醇的方法。以十二烷基硫酸钠(SDS)作为表面活性剂,系统考察了pH值、缓冲溶液类型和浓度、SDS浓度、助表面活性剂浓度、油相浓度、温度和运行电压对3-氯-1,2-丙二醇(3-MCPD),1,3-二氯-2-丙醇(1,3-DCP),2,3-二氯-1-丙醇(2,3-DCP)分离的影响。结果表明,最佳微乳缓冲液为1%(V/V)正庚烷,100 mmol/L SDS,10%(V/V)正丁醇和8 mmol/L磷酸二氢钠-硼砂溶液(pH 8.50),检测波长为192 nm,温度20℃,分离电压为15 kV。3种氯丙醇的线性范围为2.0×10-6～3.2×10-5 mol/L,相关系数大于0.996,检出限(S/N=3)为0.95～1.9μmol/L。酱油样品经乙醚液液萃取,萃取平均回收率为93.2%～103.0%,相对标准偏差小于6.5%。本方法应用于实际样品和加标后样品中三氯丙醇的检测,结果满意。     

Experimental design optimization of the capillary electrophoresis separation of leucine enkephalin and its immune complex

To optimize the capillary electrophoretic separation conditions for leucine enkephalin (LE) and the immune complex of the LE and anti-LE reaction, an analysis using a three-level, three-factorial Box-Behnken design was performed. Three separation parameters, buffer pH (X(1)), buffer concentration (X(2)), and applied voltage (X(3)), were chosen to observe the effect on separation responses. The responses were theoretical plate number, migration time of the LE peak, and resolution between the peaks. The optimum conditions and process validation were determined using statistical regression analysis and surface plot diagrams. The capillary electrophoresis optimum separation conditions were established to be 75 mM phosphate buffer at pH 7.00 with an applied separation voltage of 15 kV. By using the analysis technique, the prediction of responses was satisfactory and process verification yielded values within the +/-5% range of the predicted efficiency.     

1 μm硅胶颗粒固定相的加压电色谱分离性能

制备了1 μm无孔硅胶颗粒。通过电动填充法得到总长度为45 cm(固定相填充长度为20 cm)、内径为100 μm的毛细管色谱柱。以乙腈-水体系作为流动相,详细考察了碱性化合物在该色谱柱上的加压电色谱(pCEC)分离性能,讨论了流动相比例、缓冲液浓度、pH值及操作电压等因素对分离的影响。实验结果表明,裸硅胶柱在乙腈-水体系分离碱性样品中表现出典型的反相色谱分离性能;缓冲液浓度的改变则对分离影响不大。当pH值改变时,碱性化合物的解离程度发生变化,它们与固定相之间的作用力发生变化,使得分离度发生相应的变化。分离柱效随施加电压的增加而增加,在1 kV电压下,裸硅胶柱对邻甲苯胺的柱效为35000理论塔板/m。     

Rapid enantiomeric separation of polychlorinated biphenyls by electrokinetic chromatography using mixtures of neutral and charged cyclodextrin derivatives

Electrokinetic chromatography with cyclodextrin derivatives (CD-EKC) was used to achieve the rapid enantiomeric separation of chiral polychlorinated biphenyls (PCBs). Thirteen of the 19 chiral PCBs stable at room temperature were individually separated into their two enantiomers by using 2-morpholinoethanesulfonic acid (MES) buffer (pH 6.5) containing carboxymethylated gamma-cyclodextrin (CM-gamma-CD) as pseudostationary phase mixed with beta-cyclodextrin (beta-CD) or permethylated beta-cyclodextrin (PM-beta-CD). Urea was also added to increase the solubility of PCBs and cyclodextrins in the aqueous separation buffer. Several experimental parameters such as the nature, concentration, and pH of the buffer, nature and concentration of the cyclodextrin derivatives used, and the addition of different additives were studied in order to improve the enantiomeric separation. In addition, the effect of some instrumental parameters such as separation temperature and applied voltage was also investigated. PCBs were enantiomerically separated in less than 12 min by using a 50 mM MES buffer (pH 6.5) containing 20 mM CM-gamma-CD, 10 mM beta-CD or 20 mM PM-beta-CD, and 2 M urea at a temperature of 45 degrees C and an applied voltage of 20 kV.     

Enantiomeric separation of citalopram and its metabolites by capillary electrophoresis

A simple and fast capillary electrophoretic method has been developed for the enantioselective separation of citalopram and its main metabolites, namely N-desmethylcitalopram and N,N-didesmethylcitalopram, using beta-cyclodextrin (beta-CD) sulfate as the chiral selector. For method optimisation several parameters were investigated, such as CD and buffer concentration, buffer pH, and capillary temperature. Baseline enantioseparation of the racemic compounds was achieved in less than 6 min using a fused-silica capillary, filled with a background electrolyte consisting of a 35 mM phosphate buffer at pH 2.5 supplemented with 1% w/v beta-CD sulfate and 0.05% w/v beta-CD at 25 degrees C and applying a voltage of -20 kV. A fast separation method for citalopram was also optimized and applied to the analysis of pharmaceutical formulations. Racemic citalopram was resolved in its enantiomers in less than 1.5 min using short-end injection (8.5 cm, effective length) running the experiments in a background electrolyte composed of a 25 mM citrate buffer at pH 5.5 and 0.04% w/v beta-CD sulfate at a temperature of 10 degrees C.     

Enantioseparation of palonosetron hydrochloride by micellar electrokinetic chromatography with sodium cholate as chiral selector

The enantioseparation of four stereoisomers of palonosetron hydrochloride by micellar electrokinetic chromatography using sodium cholate as chiral surfactant was described. Sodium cholate was shown to be effective in separating palonosetron hydrochloride stereoisomers. For method optimization, several parameters such as sodium cholate concentration, buffer pH and concentration, the types and concentration of organic modifiers and applied voltage, on the enantioseparation were evaluated and the optimum conditions were obtained as follows: 30 mM borate buffer (pH 9.40) containing 70 mM sodium cholate and 20% (v/v) methanol with an applied voltage of 20 kV. Under these conditions, baseline separation of palonosetron hydrochloride stereoisomers was achieved within 18 min.     

高效毛细管电泳安培法测定肉苁蓉中松果菊苷的含量

采用毛细管电泳安培法建立了肉苁蓉中松果菊苷含量的检测方法,探讨了缓冲溶液种类、工作电位、分离电压、进样时间等对分离和检测的影响.在15 mmol/L硼砂缓冲溶液(pH 9.5),25 kV电压,0.6 V工作电位的条件下,松果菊苷的质量浓度在0.5～50.0 mg/L范围内与峰面积呈良好线性,相关系数为0.9994,检...     

3-苯基乳酸的手性毛细管电泳拆分

考察了环糊精种类、环糊精浓度、缓冲溶液pH、分离电压、温度等因素对3-苯基乳酸手性分离的影响,并对分离条件进行了优化。结果表明,采用区带毛细管电泳技术,以0.03 mol/L的羟丙基-β-环糊精为手性选择剂,0.1 mol/L的磷酸缓冲溶液(pH 5.5)为电泳缓冲溶液,26 kV的分离电压,在25 ℃下可使3-苯基乳酸对映体达到基线分离,分离度为1.51。     

Optimization of the separation of flavonoids by micellar electrokinetic capillary chromatography: Effect of organic solvents

Summary A group of flavonoids of special interest to wine quality were separated by micellar electrokinetic chromatography (MEKC) with diode array detection. Their separation was optimized as a function of the buffer concentration and pH, the concentration of sodium dodecyl sulfate (SDS) and the applied voltage. Selectivity and resolution of the solutes were increased by adding organic solvents to the separation buffer, the best results being obtained at lower concentrations. An optimized buffer with 5% methanol provided optimum separation with regard to efficiency, resolution and migration time. The optimized method was applied to the determination of these compounds in wine samples.     

毛细管电泳电致化学发光检测血浆中布比卡因

布比卡因是一种外科局部麻醉剂,使用过量会导致中枢神经系统和心脏血管系统中毒^[1],可引起心脏停博.高效液相色谱和毛细管电泳(CE)^[2]是该药常用的检测方法.     

部分水溶性维生素胶束电动毛细管色谱行为研究

详细探讨了十二烷基硫酸钠浓度、硼砂浓度、溶液PH值、电泳电压对部分水溶性维生素胶束电动毛细管色谱行为的影响,在优化条件下,4min内完成5种水溶性维生素的分离。