Structural and sorption properties of carbon replicas obtained by matrix carbonization of organic precursors in SBA-15 and KIT-6

We have carried out a comparative study of matrix carbonization of some organic precursors (sucrose, polydivinylbenzene, polyphenol-formaldehyde, polyacrylonitrile, acetonitrile) in SBA-15 and KIT-6 silica mesoporous molecular sieves. We have shown that carbon mesoporous molecular sieves of the CMK-8 type, obtained in KIT-6 mesopores, have better adsorption characteristics due to the features of the three-dimensional cubic structure, the larger pore volume and thickness of the walls of the framework. The maximum micropore volume is observed in CMK-3 and CMK-8, obtained by carbonization of polyphenol-formaldehyde and polydivinylbenzene, while the greatest specific surface area is observed on carbonization of sucrose, where the maximum hydrogen adsorption capacity is achieved at a level of ∼1.4 wt.% (77 K, 1 atm). We show that the mesopore surface coverage by hydrogen in carbon mesoporous molecular sieves increases as the degree of graphitization increases.     

Reversible replication between ordered mesoporous silica and mesoporous carbon

Highly ordered mesoporous silica can be regenerated from a mesoporous carbon CMK-3 that is a negative replica of mesoporous silica SBA-15, indicating reversible replication between carbon and inorganic materials.     

Synthesis and characterization of nanocast silica NCS-1 with CMK-3 as a template

Nanocast silica (NCS-1) was synthesized by a casting process by employing the mesoporous carbon CMK-3 (the replica of SBA-15) as a template, tetraethoxysilane (TEOS) as the silica source, and hydrochloric acid (HCl) as the catalyst. The ordered carbon template was removed by employing different methods, such as calcination, thermal treatment followed by calcination, and controlled combustion. According to XRD and TEM characterization, NCS-1 exhibits an ordered structure with hexagonal symmetry and retains the morphology of the original SBA-15 used for the synthesis of CMK-3 over two replication steps on the nanometer scale. This demonstrates the well-connected porosity in CMK-3 type carbon, which can be used as a mold to synthesize mesostructured materials. The nitrogen adsorption isotherms generally show type IV shape, indicating mesoporous characteristics. The structure of NCS-1 is strongly influenced by variables of the nanocasting process, such as the loading amount of silica, hydrolysis temperature, and carbon removal methods. The surface area, pore size, and pore volume of NCS-1 can be tuned to a certain range by varying these parameters.     

不同孔径的介孔碳分子筛对VB12的吸附性质研究

摘要利用SBA-15为模板, 在不同温度下合成了孔径大小在3.7(CMK-3-100)和6-3 nm(CMK-3-150)之间的介孔碳， 以其作为吸附剂, 研究了它们在水溶液中对VB12的吸附作用. 结果表明, CMK-3-130与CMK-3-100和CMK-3-150相比， 表现出对VB12最大的吸附能力(吸附能力为412.5 mg/g), 这是因为它有比较高的有序结构和比较大的孔容.     

Surface functionalization of ordered mesoporous carbons--a comparative study

Hexagonally structured mesoporous carbons C15 and CMK-5 and cubically structured carbon C48 were synthesized using ordered silica SBA-15 and MCM-48 as templates and carbon precursors of different structures. The surfaces of these ordered carbons were chemically functionalized by employing an approach, in which the selected diazonium compounds were in situ generated and reacted with the carbon frameworks of the mesoporous carbons. The aromatic organic molecules containing chlorine, ester, and alkyl groups were covalently attached to the surface of these ordered mesoporous carbons. The presence of functional groups on the modified carbons was confirmed with Fourier transform infrared spectroscopy, thermogravimetric analysis, and nitrogen adsorption. The BET-specific surface area and the pore width of ordered carbons were significantly reduced, whereas the primary structure of these ordered carbons and their unit cells were intact. Basically, the density of grafted functional groups is related to the specific surface area of the sample, particularly the surface area of mesopores. The surface functionalization reaction takes place only on the external surface of carbon C15, while it occurs on both of the internal and external surface of CMK-5 carbon with the nanopipe structure. The presence of the micropores in CMK-5 carbon should be responsible for its lower grafting density because the small micropores are inaccessible in the reaction. It was also proposed that the preferred adsorption/reaction in C48 may be related to the observed unsymmetrical degradation of the XRD patterns for the functionalized C48 samples. The chemical modification process considerably reduced the primary mesopores in these ordered carbons by approximately 1-1.5 nm, affording carbons with micropores in the cases of C15 and C48, and mixed micropores and small mesopores in the case of CMK-5. A grafting density of approximately 0.9-1.5 micromol/m(2) was achieved under current research.     

萘在介孔分子筛MCM-41与SBA-15上的吸附特性研究

对低浓度气相萘在两种常见介孔分子筛MCM-41和SBA-15上的吸附特性进行研究。得到了萘在两种吸附剂上的吸附等温线和不同初始浓度下的穿透曲线,并分别与吸附等温线模型(Langmuir、Freundlich、D-R)和恒定浓度波动力学模型进行了拟合。结果表明, Langmuir模型能很好描述低浓度气相萘的吸附等温线(R²均在99%以上);具有微孔结构的SBA-15对萘的吸附能力要优于仅具备介孔结构的MCM-41。动力学模型在初始浓度较低时能较好地预测萘在吸附剂上的穿透曲线,且在SBA-15上的相关系数高于MCM-41;萘在2.76 mol/L时具有较大介孔的SBA-15的总传质系数K_a更高,表明萘在SBA-15上的总传质阻力更低,更能较快达到传质平衡。     

Influence of the Morphology of Mesoporous Carbon on the Electrocatalytic Activity of Pt in Oxygen Reduction

Russian Journal of Applied Chemistry - Mesostructured silicates MCM-48, SBA-15, and MCM-41 were synthesized, and the corresponding ordered mesoporous carbons CMK-1, CMK-3, and CS41 were prepared on...     

Mesoporous Molecular Sieves as Advanced Supports for Olefin Metathesis Catalysts

Summary: Siliceous mesoporous molecular sieves MCM-41, MCM-48 and SBA-15 and organised mesoporous alumina represent progressive supports for new heterogeneous catalysts for olefin metathesis and metathesis polymerization. In combination with Mo and Re oxides they provide catalysts of considerably higher activity in comparison with those based on conventional silica and alumina. Immobilization of Mo and Ru alkylidenes on these materials led to the highly active and selective catalysts with negligible leaching of transition metal.     

Gas adsorption in mesoporous micelle-templated silicas: MCM-41, MCM-48, and SBA-15

This paper reports a molecular simulation and experimental study on the adsorption and condensation of simple fluids in mesoporous micelle-templated silicas MCM-41, MCM-48, and SBA-15. MCM-41 is described as a regular cylindrical silica nanopore, while SBA-15 is assumed to be made up of cylindrical nanopores that are connected through lateral channels. The 3D-connected topology of MCM-48 is described using a gyroid periodic minimal surface. Argon adsorption at 77 K is calculated for the three materials using Grand Canonical Monte Carlo simulations. Qualitative comparison with experiments for nitrogen adsorption in mesoporous micelle-templated silicas is made. The adsorption isotherm for SBA-15 resembles that for MCM-41. In particular, capillary condensation and evaporation are not affected by the presence of the connecting lateral channels. In contrast, the argon adsorption isotherm for MCM-48 departs from that for MCM-41 having the same pore size. While condensation in MCM-41 is a one-step process, filling of MCM-48 involves two successive jumps in the adsorbed amounts which correspond to condensation in different domains of the porosity. The condensation pressure for MCM-48 is larger than that for MCM-41. We attribute this result to the morphology of the MCM-48 surface (made up of both concave and convex regions) that differs from that for MCM-41 (concave only). Our results suggest that the pore connectivity affects pore filling when the size of the connections is comparable to that of the nanopores.     

Modification of MCM-41 and SBA-15 mesoporous silicas by imidazolium ionic liquids

MCM-41 and SBA-15 mesoporous molecular sieves are modified with imidazolium ionic liquid (IL) via both physical adsorption and covalent grafting. The considerable effect of IL grafting on the porous structure and the particle morphology of mesoporous supports is shown. The pore size of these supports is found to be a key parameter determining the possibility of loading IL into such support materials.     

Effect of matrix polymerization conditions on the structure and adsorption properties of porous polymers on the basis of divinylbenzene,acrylonitrile, and methyl methacrylate

A comparative study was carried out on the matrix polymerization of divinylbenzene, acrylonitrile, and methyl methacrylate in SBA-15 silica mesoporous molecular sieves. The occupancy of the matrix mesopores by the starting monomer, the medium, the polymerization temperature and time as well as the means of removing the exotemplate were all found to affect the spatial organization and porous structure of the polymer materials. Surplus occupancy of the mesopores by the monomer (1–1.5), polymerization in vacuum, and an alkaline method for matrix removal were found to be optimal. IR spectroscopy was used to find the conversion of the starting polymer by following the relative change in intensity of the vinyl group bands. Translated from Teoreticheskaya i éksperimental'naya Khimiya, Vol. 44, No. 6, pp. 371–375, November–December, 2008.     

Thermal stability of high surface area silicon carbide materials

The synthesis of mesoporous silicon carbide by chemical vapor infiltration of dimethyl dichlorosilane into mesoporous silica SBA-15 and subsequent dissolution of the silica matrix with HF was investigated. The influence of the synthesis parameters of the composite material (SiC/SBA-15) on the final product (mesoporous SiC) was determined. Depending on the preparation conditions, materials with specific surface areas from 410 to 830 m² g⁻¹ and pore sizes between 2 and 10 nm with high mesopore volume (0.31-0.96 cm³ g⁻¹) were prepared. Additionally, the thermal stability of mesoporous silicon carbide at 1573 K in an inert atmosphere (argon) was investigated, and compared to that of SBA-15 and ordered mesoporous carbon (CMK-1). Mesoporous SiC has a much higher thermal textural stability as compared to SBA-15, but a lower stability than ordered mesoporous carbon CMK-1.     

Novel ice structures in carbon nanopores: pressure enhancement effect of confinement

We report experimental results on the structure and melting behavior of ice confined in multi-walled carbon nanotubes and ordered mesoporous carbon CMK-3, which is the carbon replica of a SBA-15 silica template. The silica template has cylindrical mesopores with micropores connecting the walls of neighboring mesopores. The structure of the carbon replica material CMK-3 consists of carbon rods connected by smaller side-branches, with quasi-cylindrical mesopores of average pore size 4.9 nm and micropores of 0.6 nm. Neutron diffraction and differential scanning calorimetry have been used to determine the structure of the confined ice and the solid-liquid transition temperature. The results are compared with the behavior of water in multi-walled carbon nanotubes of inner diameters of 2.4 nm and 4 nm studied by the same methods. For D(2)O in CMK-3 we find evidence of the existence of nanocrystals of cubic ice and ice IX; the diffraction results also suggest the presence of ice VIII, although this is less conclusive. We find evidence of cubic ice in the case of the carbon nanotubes. For bulk water these crystal forms only occur at temperatures below 170 K in the case of cubic ice, and at pressures of hundreds or thousands of MPa in the case of ice VIII and IX. These phases appear to be stabilized by the confinement.     

Preparation of mesoporous molecular sieve based hydrocracking catalysts

A series of hydrocracking catalysts based on mesoporous molecular sieves MCM-41 and SBA-15 with different silica to alumina ratios was prepared. Nickel and molybdenum were used as active metals to impregnate the extrudates prepared by using molecular sieves. The catalysts were characterized for physical and chemical properties and evaluated for the hydrocraking of desulfurised vacuum gas oil. The conversion of DS-VGO was lower as compared to that of the catalyst based on USY zeolite. However, the gas yield was lower in case of mesoporous materials based catalysts.     

Ordered mesoporous carbon as an efficient and reversible adsorbent for the adsorption of fullerenes

An ordered mesoporous carbon, CMK-3, was synthesized using a mesoporous siliceous material, SBA-15, as the template. CMK-3 was characterized and used for the adsorption of fullerenes C60 and C70. It was found that the adsorption capacity of CMK-3 is 4 times higher than that of activated carbon. The adsorption equilibrium isotherms of C60 and C70 on CMK-3 were studied for both single and binary systems. The reversibility of fullerene adsorption on CMK-3 was also explored. The results showed that CMK-3 is an effective and reversible adsorbent for the separation of fullerenes by adsorption.     

Carbon dioxide adsorption over DIPA functionalized MCM-41 and SBA-15 molecular sieves

The capture of carbon dioxide was carried out using MCM-41 and SBA-15 as adsorbents. These mesoporous materials were synthesized by the hydrothermal method, and subsequently functionalized with the di-iso-propylamine (DIPA). Then, they were characterized by XRD, BET, and TG/DTG. The X-ray diffraction patterns of the synthesized samples showed the characteristic peaks of MCM-41 and SBA-15, indicating that the structures of these materials were obtained. The functionalized samples presented a decrease of the intensities of these peaks, suggesting a decreasing in the structural organization of the material; however, the mesoporous structure was preserved. For the adsorption capacity measurements, the materials were previously saturated with carbon dioxide at 75 °C, and then desorbed in a thermobalance in the temperature range of 25–900 °C, under helium atmosphere. Desorption tests showed that the functionalized MCM-41 presented a weight loss of 7.5 wt%, against 5.9 wt% for SBA-15. The obtained values indicate that these nanostructured materials can be used as adsorbent for carbon dioxide capture.     

Electron microscopy study of novel Pt nanowires synthesized in the spaces of silica mesoporous materials.

Structures of Pt-nanowires, synthesized in channels of silica mesoporous materials MCM-41, SBA-15 and MCM-48, were investigated by transmission electron microscopy. One dimensional (1D) Pt-nanowires were formed inside the channels of the MCM-41, and were single crystals with a length of several tens to several hundreds nanometers and a diameter of ca. 3 nm pt-nanowires synthesized in SBA-15 formed a new 3D-network following 3D-pore geometry of SBA-15; that is, the main 1D-channels are interconnected to each other through randomly distributed tunnels. These Pt-nanowires showed a well single crystalline. MCM-48 has two non-intersecting chiral channels, and Pt-networks were mostly formed in one of the two channels. Therefore the networks were also chiral; however, the chirality of Pt-networks remained to be determined. It was shown that all Pt-nanowires were formed following the channel geometries of silica mesoporous materials used.     

杂原子介孔MCM-41分子筛的制备及其对含喹啉模拟柴油的吸附脱氮性能

制备了介孔MCM-41分子筛和三种杂原子(Zn、Ba和Ce)介孔MCM-41分子筛,通过X射线衍射(XRD)、红外光谱(FT-IR)、低温N_2吸附-脱附等手段对其进行表征,研究了几种介孔分子筛对氮含量为1732μg/g含喹啉模拟柴油的吸附脱氮性能。结果表明,所制备的几种分子筛均具有典型的介孔结构,且杂原子已进入到分子筛骨架中。利用Materials Studio软件构建介孔分子筛模型,模拟的XRD谱图与实验结果基本相符;进一步模拟了喹啉分子在杂原子介孔分子筛团簇上的吸附,计算了吸附能及被吸附分子和吸附中心的距离(d_((N-M)))。几种分子筛的吸附脱氮性能顺序依次为Zn-MCM-41 Ce-MCM-41 Ba-MCM-41 MCM-41;Zn-MCM-41的吸附性能最好,吸附能最大,吸附分子和吸附中心的距离d_((N-M))最小。吸附时间对杂原子介孔分子筛的吸附脱氮性能具有较大影响,而吸附温度的影响相对较小;Zn-MCM-41、Ba-MCM-41和Ce-MCM-41分子筛的最佳吸附时间分别为40、10和30 min,最佳吸附温度分别为40、30和40℃。     

纯硅MCM-48的合成研究

以正硅酸乙酯为硅源,非离子型表面活性剂聚乙二醇辛基苯基醚和阳离子型表面活性剂十六烷基三甲基溴化铵为共模板水热法合成了纯硅MCM-48分子筛。利用范德华力和氢键,聚乙二醇辛基苯基醚不仅可降低合成MCM-48所需阳离子表面活性剂的用量,而且有利于制备有序性好和稳定性高的MCM-48;并与单一阳离子表面活性剂制备的MCM-48的稳定性进行比较。     

Prearation of Highly Ordered Mesoporous Silica Materials and Application as Enzeme Supports

An enzyme, horseradish peroxidase (HRP), was adsorbed in the manner of single immersion method on the silica mesoporous materials, FSM-16, MCM-41 and SBA-15 with various pore diameters from 27 to 92 and their enzymatic activity in an organic solvent and the thermal stability were studied. FSM-16 and MCM-41 showed larger amount of adsorption of HRP than SBA-15 or silica gel,when the pore sizes were larger than the spherical molecular diameter of HRP (ca 64×37). The increased enzyme adsorption capacity may be due to the surface characteristics of FSM-16 and MCM-41, which would be consistent with the observed larger adsorption capacity of cationic pigment compared with anionic pigment for these materials. The immobilized HRP on FSM-16 and MCM-41 with pore diameter above 50 showed the highest enzymatic activity in an organic toluene and thermal stability in aqueous solution at the temperature of 70℃. The immobilized enzymes on the other mesoporous materials including large or small pore sized FSM-16 showed lower enzymatic activity in an organic solvent and the thermal stability. Both surface character and size matching between pore sizes and the molecular diameters of HRP were important in achieving high enzymatic activity in organic solvent and high thermal stability.