微/纳米六方β-Co(OH)_2水热法制备及影响因素

在无模板和表面活性剂的水热条件下,调节反应参数,可以得到一致的片状六方相β-Co(OH)2和多层片状的β-Co(OH)2微/纳米材料.合适的反应条件下,可以制备一致的结晶性好的单片状六方相β-Co(OH)2.用X射线衍射(XRD)、场发射扫描电镜(FESEM)、透射电镜(TEM)、高分辨透射电镜(HRTEM)以及选区电子衍射(SAED)等对反应产物进行了结构和形貌的表征.结果显示,Co(NO3)2的起始浓度、反应温度及溶液成分(异丙醇的加入)对反应产物的形貌结构有着重要的影响.     

氧化锌微晶的制备和形貌控制

本文在溶液体系中合成了多种形貌的氧化锌(ZnO)微晶。所得花状、雪花状、棒状、多刺球状和棱柱状氧化锌微晶用粉末X射线衍射(XRD)和扫描电镜(SEM)进行了鉴定和表征,考察了反应条件如溶剂、温度及pH值对ZnO微粒尺寸和形貌的影响,初步探讨了不同形貌ZnO微粒的生长机理。该文对制备形貌可控的氧化物具有一定的指导意义。     

乙二胺四乙酸辅助水热法合成NaYF_4纳米晶

用络合剂乙二胺四乙酸(EDTA)辅助水热法合成了NaYF4纳米球和微米棱柱,通过控制反应条件得到了立方相和六方相纳米晶体;采用X射线粉末衍射仪(XRD)、扫描电子显微镜(SEM)及荧光光谱仪(PL)分析了产物的结构、形貌及发光性能.结果表明,络合剂EDTA和氟化物的物质的量对NaYF4的形貌和粒度有很大影响,且产物的荧光性能呈现出尺寸依赖性.     

分级结构ZnO六棱柱：制备及对5-取代-1氢四氮唑催化性能

以简单有效的液相法合成了具有分级结构的ZnO六棱柱,通过改变不同表面活性剂、碱源等反应条件调控ZnO的形貌,结果表明CTAB(十六烷基三甲基溴化铵)和六亚甲基四胺为合成ZnO六棱柱最佳的表面活性剂和碱源,通过研究CTAB的浓度以及反应时间对产品形貌的影响,初步提出了分级结构ZnO六棱柱的形成机理。对制备的ZnO六棱柱进行四氮唑催化性能研究,以不同取代腈为底物显示了良好的催化活性,产率大多在85%以上。     

ZnO纳米环的可控合成

以六次甲基四胺(Hexamethylenetetramine, C6H12N4)和水合硝酸锌[Zn(NO3)2·2H2O]为原料, 表面活性剂聚丙烯酰胺-氯化二烯丙基二甲基铵[poly(acrylamide-co-diallyldimethylammonium chloride, 缩写为PAM-CTAC]为形貌控制剂, 采用液相沉淀法合成了ZnO纳米环. 产物的结构与形貌经X射线粉末衍射(XRD)和扫描电子显微镜(SEM)表征. 研究了不同实验条件(如表面活性剂的浓度、反应物浓度、反应温度和反应时间等)对产物形貌与尺寸的影响. 讨论了PAM-CTAC作用下ZnO纳米环可能的形成机理. 结果表明, 合成产物为六方Wurtzite型结构的ZnO纳米环, 环内径约为220 nm, 壁厚约为70 nm. 反应物浓度、反应温度对ZnO纳米环的形成以及纳米环的尺寸都有一定的影响, 但起关键作用的是PAM-CTAC. 通过改变PAM-CTAC的浓度, 能有效地实现ZnO纳米环的可控合成. 室温荧光光谱显示, ZnO纳米环的紫外发射峰具有较窄的半高宽(FWHM)(约7 nm), 表明合成产物具有较窄的尺寸分布.     

反相微乳液介质中Nd2(CO3)3·8H2 O的可控合成

以十六烷基三甲基溴化铵(CTAB)/正丁醇/正辛烷/硝酸钕[Nd(NO3)3]溶液(碳酸钠溶液)所组成的反相微乳液为反应介质, 采用微乳液溶剂热法合成了Nd2(CO3)3·8H2O, 并考察了水/核比([H2O]/[CTAB])和Nd(NO3)3的浓度对其形貌和尺寸的影响. 利用X射线衍射(XRD)、 热分析(DSC-TGA)、 扫描电子显微镜(SEM)和透射电子显微镜(TEM)等对Nd2(CO3)3·8H2O的晶型、 形貌及尺寸进行了表征, 并提出了不同形貌Nd2(CO3)3·8H2O形成的可能机理. 结果表明, 随着水/核比的增大, Nd2(CO3)3·8H2O的形貌从多面体变成鱼尾状, 再变成针状; 随着Nd(NO3)3浓度的增大, 针状Nd2(CO3)3·8H2O的尺寸逐渐减小.     

从Mn3O4前驱体到MnO2纳米结构的形貌和结构变化

锰氧化物是一类重要的且具有广泛应用背景的材料, 控制合成不同形貌和组成的锰氧化物纳米结构将有助于拓宽其应用领域. 本文报道了以Mn3O4为前驱体, 通过水热法控制合成MnO2纳米结构的方法. 用X射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)等手段对产物进行表征. 在硫酸体系中,当反应温度为80 和180 ℃时, 所得产物分别为γ-MnO2海胆结构和β-MnO2单晶纳米棒. 此外, MnOOH纳米线可以在稀酸溶液中合成. 考察了反应温度、溶液酸度、反应时间对产物结构的影响, 并提出了基于γ-MnO2为中间产物的反应机理. 实验结果表明, 水热体系促进了产物的各向异性生长并最终形成不同形貌和结构的锰氧化物.     

从Mn_3O_4前驱体到MnO_2纳米结构的形貌和结构变化(英文)

锰氧化物是一类重要的且具有广泛应用背景的材料,控制合成不同形貌和组成的锰氧化物纳米结构将有助于拓宽其应用领域.本文报道了以Mn3O4为前驱体,通过水热法控制合成MnO2纳米结构的方法.用X射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)等手段对产物进行表征.在硫酸体系中,当反应温度为80和180℃时,所得产物分别为γ-MnO2海胆结构和β-MnO2单晶纳米棒.此外,MnOOH纳米线可以在稀酸溶液中合成.考察了反应温度、溶液酸度、反应时间对产物结构的影响,并提出了基于γ-MnO2为中间产物的反应机理.实验结果表明,水热体系促进了产物的各向异性生长并最终形成不同形貌和结构的锰氧化物.     

微乳法制备Co3O4纳米材料及其形成机理研究

采用Co(NH3)6Cl3为钴源,利用微乳法制备了Co3O4的纳米材料,可控合成了尺寸均一的边长约40～50 nm纳米立方和直径约400 nm的纳米球.并且考察了反应条件对产物形貌的影响,水与CTAB的摩尔比(w)和反应物浓度对产物形貌有着很大的影响,而反应温度对产物形貌基本没有影响.随着w值的增加,合成的纳米材料的尺...     

高质量NaNdF_4六方棱柱纳米棒的水热形貌控制合成及发光性质

采用水热法在温和的条件下合成了具有规则外形的六方棱柱状NaNdF4纳米棒。X射线衍射(XRD)分析表明:产物为纯六方相NaNdF4,场发射扫描电镜(SEM)分析表明产物形貌为棱柱状纳米棒,长约为550 nm,棒的端部呈规则六边形,边长约为85nm。高分辨透射电子显微镜(HRTEM)和选区电子衍射(SD)显示所得样品为良好的单晶。NaNdF4晶体的生长动力学过程表明:螯合剂(EDTA-Na2)与稀土金属离子间的螯合作用受pH值影响,导致成核速度变化,进而影响NaNdF4纳米晶的最终尺寸和形貌。室温下的NaNdF4纳米棒的发光峰位于红外光范围(λ=892,1 058,和1 342 nm),其最强发射峰位于1 058 nm,对应于Nd3+的4F3/2→4I11/2f-f跃迁。     

Synthesis,molecular structure,and C-C coupling reactions of carbeneruthenium(II) complexes with C5H5Ru(=CRR') and C5Me5Ru(=CRR') as molecular units

The ethene derivatives [(eta(5)-C(5)R(5))RuX(C(2)H(4))(PPh(3))] with R=H and Me, which have been prepared from the eta(3)-allylic compounds [(eta(5)-C(5)R(5))Ru(eta(3)-2-MeC(3)H(4))(PPh(3))] (1, 2) and acids HX under an ethene atmosphere, are excellent starting materials for the synthesis of a series of new halfsandwich-type ruthenium(II) complexes. The olefinic ligand is replaced not only by CO and pyridine, but also by internal and terminal alkynes to give (for X=Cl) alkyne, vinylidene, and allene compounds of the general composition [(eta(5)-C(5)R(5))RuCl(L)(PPh(3))] with L=C(2)(CO(2)Me)(2), Me(3)SiC(2)CO(2)Et, C=CHCO(2)R, and C(3)H(4). The allenylidene complex [(eta(5)-C(5)H(5))RuCl(=C=C=CPh(2))(PPh(3))] is directly accessible from 1 (R=H) in two steps with the propargylic alcohol HC triple bond CC(OH)Ph(2) as the precursor. The reactions of the ethene derivatives [(eta(5)-C(5)H(5))RuX(C(2)H(4))(PPh(3))] (X=Cl, CF(3)CO(2)) with diazo compounds RR'CN(2) yield the corresponding carbene complexes [(eta(5)-C(5)R(5))RuX(=CRR')(PPh(3))], while with ethyl diazoacetate (for X=Cl) the diethyl maleate compound [(eta(5)-C(5)H(5))RuCl[eta(2)-Z-C(2)H(2)(CO(2)Et)(2)](PPh(3))] is obtained. Halfsandwich-type ruthenium(II) complexes [(eta(5)-C(5)R(5))RuCl(=CHR')(PPh(3))] with secondary carbenes as ligands, as well as cationic species [(eta(5)-C(5)H(5))Ru(=CPh(2))(L)(PPh(3))]X with L=CO and CNtBu and X=AlCl(4) and PF(6), have also been prepared. The neutral compounds [(eta(5)-C(5)H(5))RuCl(=CRR')(PPh(3))] react with phenyllithium, methyllithium, and the vinyl Grignard reagent CH(2)=CHMgBr by displacement of the chloride and subsequent C-C coupling to generate halfsandwich-type ruthenium(II) complexes with eta(3)-benzyl, eta(3)-allyl, and substituted olefins as ligands. Protolytic cleavage of the metal-allylic bond in [(eta(5)-C(5)H(5))Ru(eta(3)-CH(2)CHCR(2))(PPh(3))] with acetic acid affords the corresponding olefins R(2)C=CHCH(3). The by-product of this process is the acetato derivative [(eta(5)-C(5)H(5))Ru(kappa(2)-O(2)CCH(3))(PPh(3))], which can be reconverted to the carbene complexes [(eta(5)-C(5)H(5))RuCl(=CR(2))(PPh(3))] in a one-pot reaction with R(2)CN(2) and Et(3)NHCl.     

Assembly of hybrid organic-organometallic materials through mechanochemical acid-base reactions

Manual grinding of the organometallic complex [Fe(eta(5)-C(5)H(4)COOH)(2)] with a number of solid bases, namely 1,4-diazabicyclo[2.2.2]octane, C(6)H(12)N(2), 1,4-phenylenediamine, p-(NH(2))(2)C(6)H(4), piperazine, HN(C(2)H(4))(2)NH, trans-1,4-cyclohexanediamine, p-(NH(2))(2)C(6)H(10), and guanidinium carbonate [(NH(2))(3)C](2)[CO(3)], generates quantitatively the corresponding adducts, [HC(6)H(12)N(2)][Fe(eta(5)-C(5)H(4)COOH)(eta(5)-C(5)H(4)COO)] (1), [HC(6)H(8)N(2)][Fe(eta(5)-C(5)H(4)COOH)(eta(5)-C(5)H(4)COO)] (2), [H(2)C(4)H(10)N(2)][Fe(eta(5)-C(5)H(4)COO)(2)] (3), [H(2)C(6)H(14)N(2)][Fe(eta(5)-C(5)H(4)COO)(2)].2 H(2)O, (4.2 H(2)O), and [C(NH(2))(3)](2)[Fe(eta(5)-C(5)H(4)COO)(2)].2 H(2)O, (5.2 H(2)O), respectively. Crystallization from methanol in the presence of seeds of the ground sample allows the growth of single crystals of these adducts; therefore we were able to determine the structures of the adducts by single-crystal X-ray diffraction. This information was used in turn to identify and characterize the polycrystalline materials obtained by the grinding process. In the case of [HC(6)N(2)H(12)][Fe(eta(5)-C(5)H(4)COOH)(eta(5)-C(5)H(4)COO)] (1), the base can be removed by mild treatment regenerating the starting dicarboxylic acid, while in all other cases decomposition is observed. The solid-solid processes described herein imply molecular diffusion through the lattice, breaking and reassembling of hydrogen-bonded networks, and proton transfer from acid to base.     

Functionalization of heteropolyanions-osmium and rhenium nitrido derivatives of Keggin- and Dawson-type polyoxotungstates: synthesis, characterization and multinuclear ((183)W, (15)N) NMR, EPR, IR, and UV/Vis fingerprints

Reaction of K(10)[alpha(2)-P(2)W(17)O(61)] or K(10)[alpha(1)-P(2)W(17)O(61)] or [Bu(4)N][OsCl(4)N] in a water/methanol mixture, and subsequent precipitation with (Bu(4)N)Br provided [alpha(2)-P(2)W(17)O(61){Os(VI)N}](7-) and [alpha(1)-P(2)W(17)O(61){Os(VI)N}](7-) Dawson structures as tetrabutylammonium salts. Reactions of [(Bu(4)N)(4)][alpha-H(3)PW(11)O(39)] with either [ReCl(3)(N(2)Ph(2))(PPh(3))(2)] or [Bu(4)N][ReCl(4)N] are alternatives to the synthesis of [(Bu(4)N)(4)][alpha-PW(11)O(39){Re(VI)N}]. (183)W and (15)N NMR, EPR, IR, and UV-visible spectroscopies and cyclic voltammetry have been used to characterize these compounds and the corresponding [(Bu(4)N)(4)][alpha-PW(11)O(39){Os(VI)N}] Keggin derivative.     

The preparation and characterisation of hetero- and homobimetallic complexes containing bridging naphthalene-1,8-dithiolato ligands

Homo- and heterobimetallic complexes of the form [(PPh(3))(2)(mu(2)-1,8-S(2)-nap){ML(n)}] (in which (1,8-S(2)-nap)=naphtho-1,8-dithiolate and {ML(n)}={PtCl(2)} (1), {PtClMe} (2), {PtClPh} (3), {PtMe(2)} (4), {PtIMe(3)} (5) and {Mo(CO)(4)} (6)) were obtained by the addition of [PtCl(2)(NCPh)(2)], [PtClMe(cod)] (cod=1,5-cyclooctadiene), [PtClPh(cod)], [PtMe(2)(cod)], [{PtIMe(3)}(4)] and [Mo(CO)(4)(nbd)] (nbd=norbornadiene), respectively, to [Pt(PPh(3))(2)(1,8-S(2)-nap)]. Synthesis of cationic complexes was achieved by the addition of one or two equivalents of a halide abstractor, Ag[BF(4)] or Ag[ClO(4)], to [{Pt(mu-Cl)(mu-eta(2):eta(1)-C(3)H(5))}(4)], [{Pd(mu-Cl)(eta(3)-C(3)H(5))}(2)], [{IrCl(mu-Cl)(eta(5)-C(5)Me(5))}(2)] (in which C(5)Me(5)=Cp*=1,2,3,4,5-pentamethylcyclopentadienyl), [{RhCl(mu-Cl)(eta(5)-C(5)Me(5))}(2)], [PtCl(2)(PMe(2)Ph)(2)] and [{Rh(mu-Cl)(cod)}(2)] to give the appropriate coordinatively unsaturated species that, upon treatment with [(PPh(3))(2)Pt(1,8-S(2)-nap)], gave complexes of the form [(PPh(3))(2)(mu(2)-1,8-S(2)-nap){ML(n)}][X] (in which {ML(n)}[X]={Pt(eta(3)-C(3)H(5))}[ClO(4)] (7), {Pd(eta(3)-C(3)H(5))}[ClO(4)] (8), {IrCl(eta(5)-C(5)Me(5))}[ClO(4)] (9), {RhCl(eta(5)-C(5)Me(5))}[BF(4)] (10), {Pt(PMe(2)Ph)(2)}[ClO(4)](2) (11), {Rh(cod)}[ClO(4)] (12); the carbonyl complex {Rh(CO)(2)}[ClO(4)] (13) was formed by bubbling gaseous CO through a solution of 12. In all cases the naphtho-1,8-dithiolate ligand acts as a bridge between two metal centres to give a four-membered PtMS(2) ring (M=transition metal). All compounds were characterised spectroscopically. The X-ray structures of 5, 6, 7, 8, 10 and 12 reveal a binuclear PtMS(2) core with PtM distances ranging from 2.9630(8)-3.438(1) A for 8 and 5, respectively. The napS(2) mean plane is tilted with respect to the PtP(2)S(2) coordination plane, with dihedral angles in the range 49.7-76.1 degrees and the degree of tilting being related to the PtM distance and the coordination number of M. The sum of the Pt(1)coordination plane/napS(2) angle, a, and the Pt(1)coordination plane/M(2)coordination plane angle, b, a+b, is close to 120 degrees in nearly all cases. This suggests that electronic effects play a significant role in these binuclear systems.     

Niobium- and tantalum-based ethylene polymerisation catalysts bearing methylene- or dimethyleneoxa-bridged calixarene ligands

Treatment of p-tert-butylcalix[6]areneH(6) (H(6)tBu-L) or p-tert-butylcalix[8]areneH(8) (H(8)tBu-L(1)) with [MCl(5)] (M=Nb, Ta) in refluxing toluene or dichloromethane affords, after work-up, the complexes [{M(NCMe)Cl(2)}(2)(tBu-L)] (M=Nb (1), Ta (2)) and [(MCl(2))(2)(tBu-L(1)H(2))] (M=Nb (4), Ta (5)), respectively. Complex 1, as well as [{Nb(2)(mu-O)(2)(mu-Cl)(tBu-LH)}(2)] (3), is also available from [NbOCl(3)] and H(6)tBu-L. Reaction of [MOCl(3)] (M=Nb, Ta) with Li(3)(tBu-L(2)) in diethyl ether, where H(3)tBu-L(2) is p-tert-butylhexahomotrioxacalix[3]areneH(3), affords, after work-up, the trimeric complexes [{M(tBu-L(2))(mu-O)}(3)] (M=Nb (6), Ta (7)). The behaviour of 1 to 7 (not 3), as well as the known complexes [{(MCl)p-tert-butylcalix[4]arene}(2)] (M=Nb (8), Ta (9)) and [(MCl(2))p-tert-butylcalix[4]arene(OMe)] (M=Nb (10), Ta (11)), as pro-catalysts for the polymerisation of ethylene has been investigated. In the presence of dimethyl (or diethyl)aluminium chloride, methylaluminoxane or trimethylaluminium, these niobium and tantalum procatalysts are all active (<35 g mmol(-1) h(-1) bar(-1)), for the polymerisation of ethylene affording high-molecular-weight linear polyethylene. The dimethyleneoxa-bridged systems (derived from 6 and 7) are more active (84 and 46 g mmol(-1) h(-1) bar(-1), respectively) than the methylene-bridged systems. The molecular structures of 1-6 and 10 (acetonitrile solvate) are reported.     

Copper(II) coordination chemistry of westiellamide and its imidazole, oxazole, and thiazole analogues

The copper(II) coordination chemistry of westiellamide (H(3)L(wa)), as well as of three synthetic analogues with an [18]azacrown-6 macrocyclic structure but with three imidazole (H(3)L(1)), oxazole (H(3)L(2)), and thiazole (H(3)L(3)) rings instead of oxazoline, is reported. As in the larger patellamide rings, the N(heterocycle)-N(peptide)-N(heterocycle) binding site is highly preorganized for copper(II) coordination. In contrast to earlier reports, the macrocyclic peptides have been found to form stable mono- and dinuclear copper(II) complexes. The coordination of copper(II) has been monitored by high-resolution electrospray mass spectrometry (ESI-MS), spectrophotometric and polarimetric titrations, and EPR and IR spectroscopies, and the structural assignments have been supported by time-dependent studies (UV/Vis/NIR, ESI-MS, and EPR) of the complexation reaction of copper(II) with H(3)L(1). Density functional theory (DFT) calculations have been used to model the structures of the copper(II) complexes on the basis of their spectroscopic data. The copper(II) ion has a distorted square-pyramidal geometry with one or two coordinated solvent molecules (CH(3)OH) in the mononuclear copper(II) cyclic peptide complexes, but the coordination sphere in [Cu(H(2)L(wa))(OHCH(3))](+) differs from those in the synthetic analogues, [Cu(H(2)L)(OHCH(3))(2)](+) (L = L(1), L(2), L(3)). Dinuclear copper(II) complexes ([Cu(II) (2)(HL)(mu-X)](+); X = OCH(3), OH; L = L(1), L(2), L(3), L(wa)) are observed in the mass spectra. While a dipole-dipole coupled EPR spectrum is observed for the dinuclear copper(II) complex of H(3)L(3), the corresponding complexes with H(3)L (L = L(1), L(2), L(wa)) are EPR-silent. This may be explained in terms of strong antiferromagnetic coupling (H(3)L(1)) and/or a low concentration of the dicopper(II) complexes (H(3)L(wa), H(3)L(2)), in agreement with the mass spectrometric observations.     

Coordination chemistry of the cyclo-(P(5)tBu(4))(-) ion: monomeric and oligomeric copper(I), silver(I) and gold(I) complexes

[Na{cyclo-(P(5)tBu(4))}] (1) reacts with [CuCl(PCyp(3))(2)] (Cyp=cyclo-C(5)H(9)) and [CuCl(PPh(3))(3)] (1:1) to give the corresponding copper(I) complexes with a tetra-tert-butylcyclopentaphosphanide ligand, [Cu{cyclo- (P(5)tBu(4))}(PCyp(3))(2)] (2) and [Cu{cyclo-(P(5)tBu(4))}(PPh(3))(2)] (3). The CuCl adduct of 2, [Cu(2)(mu-Cl){cyclo-(P(5)tBu(4))}(PCyp(3))(2)] (4), was obtained from the reaction of 1 with [CuCl(PCyp(3))(2)] (1:2). Compounds 2 and 3 rearrange, even at -27 degrees C, to give [Cu(4){cyclo- (P(4)tBu(3))PtBu}(4)] (5), in which ring contraction of the [cyclo-(P(5)tBu(4))](-) anion has occurred. The reaction of 1 with [AgCl(PCyp(3))](4) or [AgCl(PPh(3))(2)] (1:1) leads to the formation of [Ag(4){cyclo-(P(4)tBu(3))PtBu}(4)] (6). Intermediates, which are most probably mononuclear, "[Ag{cyclo-(P(5)tBu(4))}(PR(3))(2)]" (R=Cyp, Ph) could be detected in the reaction mixtures, but not isolated. Finally, the reaction of 1 with [AuCl(PCyp(3))] (1:1) yielded [Au{cyclo-(P(5)tBu(4))}(PCyp(3))] (7), whereas an inseparable mixture of [Au(3){cyclo-(P(5)tBu(4))}(3)] (8) and [Au(4){cyclo-(P(4)tBu(3))PtBu}(4)] (9) was obtained from the analogous reaction with [AuCl(PPh(3))]. Complexes 3-7 were characterised by (31)P NMR spectroscopy, and X-ray crystal structures were determined for 3-9.     

Remarkable reactions of cyclooctatetraene diiron-bridging carbyne complexes with amino and amido compounds: nucleophilic addition to and breaking of the cyclooctatetraene ring

The reactions of the cationic, diiron-bridging carbyne complexes [Fe(2)(mu-CAr)(CO)(4)(eta(8)-C(8)H(8))]BF(4) (1, Ar=C(6)H(5); 2, Ar=p-CH(3)C(6)H(4); 3, Ar=p-CF(3)C(6)H(4)) with LiN(C(6)H(5))(2) in THF at low temperature gave novel N-nucleophilic-addition products, namely, the neutral, diiron-bridging carbyne complexes [Fe(2)(mu-CAr)(CO)(4)(eta(7)-C(8)H(8)N(C(6)H(5))(2))] (4, Ar=C(6)H(5); 5, Ar=p-CH(3)C(6)H(4); 6, Ar=p-CF(3)C(6)H(4))). Cationic bridging carbyne complexes 1-3 react with (C(2)H(5))(2)NH, (iC(3)H(7))(2)NH, and (C(6)H(11))(2)NH under the same conditions with ring cleavage of the COT ligand to produce the novel diiron-bridging carbene inner salts [Fe(2)[mu-C(Ar)C(8)H(8)NR(2)](CO)(4)] (7, Ar=C(6)H(5), R=C(2)H(5); 8, Ar=p-CH(3)C(6)H(4), R=C(2)H(5); 9, Ar=p-CF(3)C(6)H(4), R=C(2)H(5); 10, Ar=C(6)H(5), R=iC(3)H(7); 11, Ar=p-CH(3)C(6)H(4), R=iC(3)H(7); 12, Ar=p-CF(3)C(6)H(4), R=iC(3)H(7); 13, Ar=C(6)H(5), R=C(6)H(11); 14, Ar=p-CH(3)C(6)H(4), R=C(6)H(11), 15, Ar=p-CF(3)C(6)H(4), R=C(6)H(11)). Piperidine reacts similarly with cationic carbyne complex 3 to afford the corresponding bridging carbene inner salt [Fe(2)[mu-C(Ar)C(8)H(8)N(CH(2))(5)](CO)(4)] (16). Compound 9 was transformed into a new diiron-bridging carbene inner salt 17, the trans isomer of 9, by heating in benzene. Unexpectedly, the reaction of C(6)H(5)NH(2) with 2 gave a novel COT iron-carbene complex [Fe(2)[=C(C(6)H(4)CH(3)-p)NHC(6)H(5)](mu-CO)(CO)(3)(eta(8)-C(8)H(8))] (18). However, the analogous reactions of 2-naphthylamine with 2 and of p-CF(3)C(6)H(4)NH(2) with 3 produce novel chelated iron-carbene complexes [Fe(2)[=C(C(6)H(4)CH(3)-p)NC(10)H(7)](CO)(4)(eta(2):eta(3):eta(2)-C(8)H(9))] (19) and [Fe(2)[=C(C(6)H(4)CF(3)-p)NC(6)H(4)CF(3)-p](CO)(4)(eta(2):eta(3):eta(2)-C(8)H(9))] (20), respectively. Compound 18 can also be transformed into the analogous chelated iron-carbene complex [Fe(2)[=C(C(6)H(4)CH(3)-p)NC(6)H(5)](CO)(4)(eta(2):eta(3):eta(2)-C(8)H(9))] (21). The structures of complexes 6, 9, 15, 17, 18, and 21 have been established by X-ray diffraction studies.     

Generation of cationic [Zr-[tert-butyl enolate]] reactive species: methyl abstraction versus hydride abstraction

Treatment of the neutral methyl-Zr-enolate [Cp(2)Zr(Me)[O(tBuO)C=CMe(2)]] (1) with one equivalent of B(C(6)F(5))(3) or [HNMe(2)Ph][B(C(6)F(5))(4)] as a methyl abstractor in THF at 0 degrees C leads to the selective formation of the free ion pair complex [Cp(2)Zr(THF)[O(tBuO)C=CMe(2)]](+) [anion](-) (2) (anion=MeB(C(6)F(5))(3) (-), B(C(6)F(5))(4) (-)), which is relevant to the controlled polymerization of methacrylates. Cation 2 rapidly decomposes at 20 degrees C in THF with release of one equivalent of isobutene to form the cationic Zr-carboxylate species [Cp(2)Zr(THF)(O(2)CiPr)](+) (3), through a proposed intramolecular proton transfer process from the tert-butoxy group to the enolate. The reaction of 1 with one equivalent of B(C(6)F(5))(3) or [HNMe(2)Ph][B(C(6)F(5))(4)] in CH(2)Cl(2) leads to the direct, rapid formation of the dimeric micro-isobutyrato-Zr dicationic species [[Cp(2)Zr[micro-(O(2)CiPr)]](2)](2+) (4), which gives 3 upon dissolution in THF. Contrastingly, when [Ph(3)C][B(C(6)F(5))(4)] is used to generate the cationic Zr-enolate species from 1 in CD(2)Cl(2), a 15:85 mixture of dicationic complexes 4 and [[Cp(2)Zr[micro-(O(2)C-C(Me)=CH(2))]](2)](2+)[B(C(6)F(5))(4)]]2-(5-[B(C(6)F(5))(4)](2)) is obtained quantitatively. The formation of 5 is proposed to arise from initial hydride abstraction from a methyl enolate group by Ph(3)C(+), as supported by the parallel production of Ph(3)CH, and subsequent elimination of methane and isobutene. In addition to standard spectroscopic and analytical characterizations for the isolated complexes 2-5, complexes 4 and 5 have also been structurally characterized by X-ray diffraction studies.     

Synthesis and reactivity of homogeneous and heterogeneous ruthenium-based metathesis catalysts containing electron-withdrawing ligands

The synthesis and heterogenization of new Grubbs-Hoveyda type metathesis catalysts by chlorine exchange is described. Substitution of one or two chlorine ligands with trifluoroacetate and trifluoromethanesulfonate was accomplished by reaction of [RuCl(2)([double bond]CH-o-iPr-O-C(6)H(4))(IMesH(2))] (IMesH(2) = 1,3-bis(2,4,6-trimethylphenyl)-4,5-dihydroimidazol-2-ylidene) with the silver salts CF(3)COOAg and CF(3)SO(3)Ag, respectively. The resulting compounds, [Ru(CF(3)SO(3))(2)([double bond]CH-o-iPr-O-C(6)H(4))(IMesH(2))] (1), [RuCl(CF(3)SO(3))([double bond]CH-o-iPr-O-C(6)H(4))(IMesH(2))] (2), and [Ru(CF(3)CO(2))(2)([double bond]CH-o-iPr-O-C(6)H(4))(IMesH(2))] (3) were found to be highly active catalysts for ring-closing metathesis (RCM) at elevated temperature (45 degrees C), exceeding known ruthenium-based catalysts in catalytic activity. Turn-over numbers (TONs) up to 1800 were achieved in RCM. Excellent yields were also achieved in enyne metathesis and ring-opening cross metathesis using norborn-5-ene and 7-oxanorborn-5-ene-derivatives. Even more important, 3 was found to be highly active in RCM at room temperature (20 degrees C), allowing TONs up to 1400. Heterogeneous catalysts were synthesized by immobilizing [RuCl(2)([double bond]CH-o-iPr-O-C(6)H(4))(IMesH(2))] on a perfluoroglutaric acid derivatized polystyrene-divinylbenzene (PS-DVB) support (silver form). The resulting supported catalyst [RuCl(polymer-CH(2)-O- CO-CF(2)-CF(2)-CF(2)-COO)([double bond]CH-o-iPr-O-C(6)H(4))(IMesH(2))] (5) showed significantly reduced activities in RCM (TONs = 380) compared with the heterogeneous analogue of 3. The immobilized catalyst, [Ru(polymer-CH(2)-O-CO-CF(2)-CF(2)-CF(2)-COO)(CF(3)CO(2))([double bond]CH-o-iPr-O-C(6)H(4))(IMesH(2))] (4) was obtained by substitution of both Cl ligands of the parent Grubbs-Hoveyda catalyst by addition of CF(3)COOAg to 5. Compound 4 can be prepared in high loadings (160 mg catalyst g(-1) PS-DVB) and possesses excellent activity in RCM with TONs up to 1100 in stirred-batch RCM experiments. Leaching of ruthenium into the reaction mixture was unprecedentedly low, resulting in a ruthenium content <70 ppb (ng g(-1)) in the final RCM-derived products.