等离子体引入方式对强化制备二氧化碳重整甲烷反应的Ni/γ-Al2O3催化剂的影响

采用等离子体技术强化制备了Ni/γ-Al2O3催化剂, 以CO2重整CH4为模型反应考察了等离子体引入方式对催化剂性能的影响, 并采用H2-TPR, BET, CO2-TPD, XRD, CO2-TPSR, TGA及XPS技术对催化剂进行了表征. 研究结果表明, 与常规焙烧的催化剂相比, 在氢气还原过程前引入氮气等离子体处理能有效提高催化剂的低温反应活性. N2气等离子体处理使前驱体中的硝酸盐能在温和条件下分解, 并使催化剂具有较强的还原能力和较大的比表面积. 先进行N2气等离子体处理再进行H2气还原的催化剂, 其活性组分的分散度显著提高, 对CO2的吸附量也明显增加, 并且反应后催化剂上的积炭量比常规催化剂上的显著降低, 形成比较单一的碳物种.     

射频等离子体对合成低碳醇用CuCoAl催化剂的改性作用

采用共浸渍法制备了CuCo/γ-Al₂O₃催化剂,应用射频等离子体技术对催化剂进行改性处理。以CO加氢合成低碳醇为模型反应对催化剂进行活性评价,通过X射线物相分析(XRD)、氢氧滴定(HOT)、CO程序升温脱附(CO-TPD)和程序升温还原(TPR)等技术对催化剂进行表征,研究了射频等离子体技术强化处理对催化剂结构、吸附性能和还原性能的影响。结果表明,等离子体技术改性处理提高了催化剂活性组分的分散度,细化了铜物种的晶粒尺寸,增加反应活性位并调变了活性位对吸附物种的吸附强度,改进了催化剂的还原性能,等离子体改性处理的催化剂比未处理的样品CO加氢反应活性和低碳醇的时空产率显著提高。     

用常压高频冷等离子体射流还原Ni/γ-Al2O3催化剂的新方法

采用大气压高频冷等离子体炬,对用于甲烷和CO2重整反应的Ni/γ-Al2O3催化剂进行还原.考察了还原后催化剂的反应活性和选择性,并与常规方法还原的催化剂进行了对比.结果表明,采用这种新方法还原催化剂只需10 min,操作快速简便,并且还原后的催化剂的活性和选择性都明显优于常规催化剂.在850℃,原料气CH4和CO2的摩尔比为4/6的条件下反应时,可获得95.77%的甲烷转化率、75.65%的CO2转化率、100%的H2选择性和94.79%的CO选择性.此外,该新型催化剂具有较好的稳定性,连续反应36 h后,活性基本不下降.XRD表征结果发现,采用该方法还原的催化剂只有金属镍和γ-Al2O3相,没有检测到Ni Al2O4以及其它镍氧化物.与常规催化剂相比,采用等离子体还原的新型催化剂具有较小的镍晶粒尺寸,金属活性组分的分散度大大提高.     

常压高频冷等离子体炬制备的CH4/CO2重整用Ni/γ-Al2O3催化剂的表征

 分别采用常规焙烧还原 (C)、常规焙烧与常压高频冷等离子体炬还原相结合 (PR), 以及常压高频冷等离子体炬直接焙烧还原 (PC&;R) 制备了 Ni/γ-Al2O3 催化剂. 通过 X 射线衍射、H2-程序升温脱附、CO2-程序升温脱附、N2 吸附-脱附实验、透射电镜和热重分析等方法对催化剂进行了表征. 并考察了其 CH4/CO2 重整反应活性. 结果表明, 催化剂经等离子体处理后低温活性明显增加. 在得到相同 CH4 和 CO2 转化率情况下, PC&;R 法制备的催化剂与常规催化剂相比, 反应所需温度可以降低 50 oC. PC&;R 催化剂上 Ni 分散度提高了 100%, Ni 粒子粒径降低了 70%, 达到 5 nm, 催化剂的抗积炭性能显著增强. 所得催化剂较高的低温活性和抗积炭性能得益于常压高频冷等离子体炬对催化剂前驱体还原速率快, 处理时间大为缩短, 避免了由于长时间高温焙烧和还原所引起的对载体的烧结和金属 Ni 的团聚.     

钙钛矿型氧化物负载纳米金属催化剂结构的动态调变及其催化氧化CO反应性能

研究了钛酸钡和钛酸钙担载的Ag和Pt纳米催化剂的表面结构随氧化-还原处理过程的动态变化及其对CO完全氧化反应性能的影响.发现氧化物担载的Ag催化剂在氧化处理后其催化活性较还原处理的高; X射线衍射(XRD)和X射线光电子能谱(XPS)表征结果表明,氧化处理能够提高载体表面Ag颗粒的分散度,而还原处理导致Ag颗粒的聚集,从而降低了催化氧化CO反应的活性.氧化-还原处理改变了担载Ag纳米粒子的尺寸并影响其CO氧化反应活性.与此相反,氧化物担载的Pt催化剂在还原处理后所表现出的CO氧化反应活性较氧化处理的高; 对比研究发现,氧化和还原处理后Pt纳米粒子的尺寸基本相同,但是氧化处理的样品中Pt表面物种以氧化态为主,而还原处理后Pt表面物种主要为金属态.Pt纳米粒子表面化学状态随氧化-还原处理的调变是导致表面催化活性差异的主要原因.     

Pd/SAPO-34催化剂上CO低温氧化反应

 采用水热法合成了小晶粒的 SAPO-34, MnSAPO-34 和 CuSAPO-34 分子筛, 并以它们为载体采用浸渍法制备了一系列不同 Pd 含量的催化剂用于催化 CO 氧化反应. 结果表明: 分子筛载体、催化剂制备条件、反应条件、Pd 含量及预还原等对催化剂的活性影响较大. 催化剂活性随焙烧温度的增加而降低, 而随着反应温度的升高而提高, 担载在 SAPO-34 上 Pd 含量为 1.35% 时性能最佳. X射线衍射和透射电镜结果表明 Pd 物种高度分散于催化剂上, 粒子粒径在 2~8 nm; X射线光电子能谱及氢气程序升温还原结果表明, 高度分散的 Pd2+ 物种是 CO 氧化反应活性位. 随着反应进行被还原为 Pd0 物种, 因而导致催化剂活性下降. H2 预还原处理催化剂致使活性下降的实验结果也支持了这一结论.     

负载型Au-Pd双金属催化剂的制备及其对CO氧化的催化活性

采用改性的等体积浸渍法制备了SiO2负载的Au-Pd双金属催化剂,考察了催化剂的焙烧温度对CO氧化反应活性的影响.与623,723和773K的条件下焙烧的催化剂相比,673K焙烧的催化剂具有良好的催化CO氧化活性,CO完全转化温度低于398K.应用N2物理吸附、X射线衍射、程序升温还原、CO程序升温脱附及X射线光电子能谱等技术对催化剂进行了表征.结果表明,673K焙烧的催化剂具有最大的比表面积和最小的孔径,存在Au0,Pd0和PdO相,AuxPdy合金相很少;而773K焙烧的催化剂上除了含有Au0,Pd0和PdO相外,还存在明显的AuxPdy合金相.具有大比表面积,小孔径,Au0,Pd0和PdO多相共存的催化剂可使CO的吸附量增加,催化活性提高;而AuxPdy合金相的生成并不能提高催化剂的催化活性.     

Ce助剂对V/SiO_2催化CO_2氧化乙苯脱氢性能的影响

通过N2吸附、X射线衍射(XRD)、X射线光电子能谱(XPS)、H2程序升温还原(H2-TPR)、CO2程序升温脱附(CO2-TPD)和热重分析(TGA)等多种表征手段和催化反应性能评价,研究了铈助剂的添加对V/SiO2催化CO2氧化乙苯脱氢性能的影响.结果表明,Ce助剂不仅提高了催化剂活性组分分散性和氧化还原性能,抑制了钒物种的深度还原,而且增强了催化剂碱性和CO2吸附能力,减缓了积炭生成,从而显著提高了V-Ce/SiO2对CO2氧化乙苯脱氢反应的催化活性和稳定性.在本实验中,V(0.8)-Ce(0.25)/SiO2催化剂表现出最佳的催化性能,苯乙烯(ST)收率可达55.6%,选择性为98.5%,反应12 h后,催化剂活性基本不变,与惰性N2气氛比较,CO2明显促进了乙苯脱氢反应,归因于CO2能保持催化剂表面钒物种的高价态.     

贫燃条件In-Ag/TiO_2-γ-Al_2O_3催化CO选择性还原NO（英文）

汽车尾气中主要污染成分CO和NO_x可导致酸雨、光化学烟雾和臭氧空洞效应,对生物、环境及生态系统造成重大危害.污染源中CO是性能优良的还原剂,如能不添加还原剂实现CO催化还原NO_x,将成为最具经济技术优势的NO_x脱除技术.在富氧、低温条件下,利用CO选择性催化还原NO_x为N_2,是目前选择性催化还原研究中的热点和难点.催化CO还原NO_x常用的贵金属Ir,Rh,Pt和Pd矿藏稀少,价格昂贵,有氧条件下活性急降,而分子筛催化剂和一些金属氧化物催化剂普遍存在反应温度高,尤其对N_2选择性差等问题.为解决上述问题,需寻找新的适合我国矿产资源的催化体系.研究发现,稀散金属基催化剂对氮氧化物的净化具有一定效果,因而可将我国的稀散金属资源优势转化为技术优势和经济优势.因此,本文以TiO_2-γ-Al_2O_3(TA)为载体,In/Ag为活性组分,采用等体积浸渍法制备了InAg/TA以及In/TA,Ag/TA和InAg/Al(γ-Al_2O_3为载体)催化剂,考察了贫燃条件下CO选择性还原NO的催化活性.研究表明,双金属催化剂InAg/Al和InAg/TA的活性比单金属催化剂In/TA和Ag/TA高,In/TA催化剂中引入Ag物种能降低起燃温度;另外,相比于InAg/Al催化剂,InAg/TA催化剂具有较高的催化活性,550-600°C时N_2产率超过60%,说明载体中引入TiO_2可以提高催化剂活性.为了深入研究InAg/TA催化剂中Ag物种和TiO_2对In物种的作用,通过比表面测定、X射线衍射(XRD)、透射电子显微镜(TEM)、X射线光电子能谱、紫外-可见光吸收光谱、氢气程序升温还原、傅立叶变换红外线光谱等方法分析了催化剂结构和表面形态.结果表明,Ag物种可以提高In物种的分散性,In和Ag物种在TA载体表面可以很好地分散,从而有利于提高催化活性.In和Ag物种在TA载体表面以氧化态形式存在,并且Ag物种可以提高In物种表面含量,表面In和Ag物种含量越高,吸附活性位越多,催化活性越高;同时,TiO_2也可以促进NO吸附,从而提高InAg/TA催化剂活性.InAg/TA催化剂在450°C连续反应72 h进行稳定性测试,测试前后分别在50-600°C进行活性测试,并用XRD和TEM对反应后的催化剂进行表征测试.结果表明,InAg/TA催化剂具有较好的稳定性,连续反应前后催化剂活性基本保持不变,推测可能由于在有CO和O_2存在的体系中,Ag物种利用自身Ag~+与Ag~0之间的氧化还原反应抑制了活性组分In_2O_3的还原和聚集,稳定了In物种乃至催化剂活性.InAg/TA催化剂用于贫燃条件下CO还原NO具有较好的催化效果,主要归因于催化剂活性组分分散性好,稳定性高,对NO吸附能力强.Ag物种可以稳定In物种并提高其分散性,TiO_2可以改善In物种和Ag物种的分散性并促进NO吸附.     

射频等离子体技术制备合成低碳醇用新型Cu-Co/SiO_2催化剂(英文)

采用射频等离子体技术制备新型Cu-Co/SiO2催化剂.与直接焙烧制备的样品相比,射频等离子体处理提高了催化剂的比表面积,显著增大了活性物种Co的表面含量,有效改进了催化剂的还原性能.以CO加氢合成低碳混合醇为模型反应,在563K,5.0MPa,6000h-1,V(H2)∶V(CO)=1.6的条件下,等离子体处理和等离子体处理后再焙烧样品比673K焙烧样品的催化活性提高30.46%和65.30%,低碳醇的时空收率分别提高58.22%和76.11%.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).