镧离子掺杂的聚苯乙烯阳离子交换树脂碳化产物的组成,结构和？…

制备了Ｌａ＾３＋掺杂的聚苯乙烯阳离子交换树脂，对其进行碳化处理３，分析了树脂碳化产物的组成和结构，并进一步考察了树脂碳化产物作为二次锂离子电池碳电极材料的电化学行为。Ｌａ＾３＿掺杂的聚苯乙烯阳离子交换树脂碳化产物与相同处理条件下的未掺杂离子的树脂碳化样品相比，３种非Ｃ元素，Ｈ，Ｏ，２的含量都发生了明显的变化，其中，ＨＯ，含量有所提高，而含量则有所降低。Ｌａ＾３＋掺杂的聚苯乙烯阳离子交换树脂在碳化过     

聚苯乙烯阳离子交换树脂碳化产物的X射线衍射分析

用X射线衍射法分析了聚苯乙烯阳离子交换树脂碳化产物石墨化度和微观结构参数，结果表明聚苯乙烯阳离子交换树脂在1000℃以下碳化处理的样品，石墨化程度都很低，属于在中低温条件下较难石墨化处理的树脂样品；H型树脂碳化产物的晶面层有着碳化处理温度升高而依次减小，并且（002）晶面层间距减小速度快于（100）晶面；H型树脂在低温碳化处理条件下，主要是在二维平面结构上演变成石墨微晶，只有碳化处理温度较高时，平面结构的石墨微晶才相互调整，形成纵向平行有序的微晶体；树脂掺杂金属离子后，有利于树脂在碳化过程中形成的石墨微晶层片纵向有序排列；掺杂不同金属离子的树脂碳化样品，在结构参数方面都明显不同于未掺杂的H型树脂碳化样品。     

对聚苯树脂炭化产物作为锂离子电池碳电极材料的研究Ⅱ.炭化产物制备的电极材料组装的锂离子电池电化学性能

电化学性质;对聚苯树脂炭化产物作为锂离子电池碳电极材料的研究Ⅱ.炭化产物制备的电极材料组装的锂离子电池电化学性能     

对聚苯树脂炭化产物作为锂离子电池碳电极材料的研究Ⅱ.炭化产物制备的电极材料组装的锂离子电池电化学性能

电化学性质;对聚苯树脂炭化产物作为锂离子电池碳电极材料的研究Ⅱ.炭化产物制备的电极材料组装的锂离子电池电化学性能     

对聚苯树脂炭化产物作为锂离子电池碳电极材料的研究(Ⅰ)树脂炭化产物的组成和结构

元素含量;对聚苯树脂炭化产物作为锂离子电池碳电极材料的研究(Ⅰ)树脂炭化产物的组成和结构     

聚3-(4-氟苯基)噻吩/碳化聚丙烯腈泡沫复合电极的电化学研究

噻吩衍生物是合成导电高分子材料的单体之一,在有机电致发光器件和电能存储等方面有着广泛的应用。聚3-(4-氟苯基)噻吩(PFPT)是一类既可进行p型掺杂又可进行n型掺杂的窄能带聚合物,在导电高分子型电化学电容器方面具有很好的应用前景,聚丙烯腈微孔膜已在锂离子电池方面有了很好的应用。若将它与碳纸复合后,再进行高温碳化和CO2活化,可制得导电性好、比表面积大的片状材料,作为电化学电容器的电极材料具有一定的双电层电容量．本文在三电极电解池中以这种材料的薄片为工作电极使3-(4-氟苯基)噻吩在乙腈溶液中进行电化学聚合,制备了聚3-(4-氟苯基)噻吩／碳化聚丙烯腈泡沫复合电极并研究了电极的电化学特性。     

锂离子电池新型树脂碳电极材料的研究

测试分析了碳化处理条件对糠醇树脂碳化产物组成,结构和电化学性能的影响,结果表明：620℃碳化处理的样品出现了明显尖锐的（100）晶面特征衍射峰。同时还发现了（110）和（006）晶面特征衍射峰,表现糠醇树脂是一种较易石墨化的树脂材料,碳化样品比表面积均随着处理温度升高而下降。处理气氛对碳化产物比表面积的影响表现得更为强烈。700℃惰性气氛中碳化处理的样品与还原性气氛中处理的样品相比,比表面积降低了约61．5％,实验结果还发现620℃－1300℃范围内处理的糠醇树脂碳化样品组装的锂离电池都表现出了相对较高的充放电容量,其中700℃碳化处理的样品组装的锂离子电池充放电容量最高,实验结果还表明树脂碳化产物的比表面积是影响电池充放电性能的重要因素,碳化产物的比表面积越大,电池的充放电容量就越高。     

Fe2O3锂离子电池负极材料研究进展

Fe2O3锂离子电池负极材料因其具有的高能量密度而备受关注。但Fe2O3电极材料存在的如低导电性、充/放电过程中体积改变导致的循环稳定性差等问题限制其实际应用。介绍了高比表面积、结构稳定以及储锂动力学等因素对锂离子电池负极材料电化学性能的重要影响,综述电极活性材料纳米化、形貌控制和杂原子掺杂对Fe2O3负极材料电化学性能改善的相关研究进展,最后对Fe2O3电极材料的发展前景进行了展望。     

S-M(M=Cu, Co, Ti)复合掺杂层状LiMnO2 的合成及其电化学性能

用水热法合成了锂离子电池正极材料正交结构LiMnO2材料, 并对其进行S2－、大尺寸阳离子(Cu2＋, Co3＋, Ti4＋)以及硫-金属离子复合掺杂改性. 用X射线衍射(XRD)、X光电子能谱分析(XPS)、透射电子显微镜(TEM)、恒电流充放电、交流阻抗谱(EIS)等测试技术进行表征. 实验结果表明: 当掺入离子的含量较低时, 得到的产物能保持完整的正交结构, 并表现出较好的电化学性能. S2－和非Jahn-Teller效应大尺寸阳离子的掺入使材料的循环稳定性能大幅度提高, 而这种提高是源于这些离子对LiMnO2结构的稳定作用. 电极材料Li1.02Mn0.988Ti0.012O1.989S0.011显示了最优的电化学性能, 在50 mA•g－1放电速率下, 其初始放电容量为142.6 mAh•g－1, 60次循环后放电容量为213.4 mAh•g－1. 硫-金属阳离子复合掺杂, 综合了大尺寸阳离子可以提高材料中Li＋的扩散能力和S2－掺杂抑制Jahn-Teller畸变两方面优势, 使层状结构LiMnO2正极材料既保持了较高的容量又获得良好的循环性能.     

高性能锂离子电池用N掺杂C-Sn交联纳米纤维自支撑电极的理性设计（英文）

为了提高碳材料作为锂离子电池负极材料的比容量,将氮掺杂的碳纤维与高容量的Sn进行复合。通过静电纺丝及低温碳化制备了均匀镶嵌Sn纳米颗粒的氮掺杂碳纳米纤维(C-Sn)复合膜。该复合膜直接用作自支撑锂离子电池负极时表现出较好的电化学性能,Sn的引入显著提高了碳纳米纤维膜的电化学性能。碳均匀包覆Sn后形成的纤维结构可以促进离子电子的传导,并能有效缓冲Sn纳米粒子在循环过程中的体积变化,从而有效抑制粉化与团聚。Sn含量约为25.6%的CSn-2电极具有最高的比容量和更优异的倍率性能。电化学测试结果表明,在2A·g^-1的电流密度下,充放电循环1000圈后充电(放电)比容量为412.7(413.5)mAh·g^-1。密度泛函理论(DFT)计算结果表明,N掺杂非晶碳与锂具有良好的亲和性,有利于将合金化反应之后形成的Sn_xLi_y合金锚定在碳表面,进而缓解了充放电过程中的Sn的体积变化。本文为高性能储锂材料的设计提供了一种切实可行的策略。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.