不同半导体体系中磷化镍光催化甲酸分解的助催化作用

研究了在不同的半导体体系(TiO₂, CdS和C₃N₄)中, Ni₂P光催化甲酸(HCOOH)分解制氢的助催化效应. 作为助催化剂, Ni₂P与3种半导体形成的复合光催化剂均表现出良好的HCOOH分解制氢活性. Ni₂P/TiO₂, Ni₂P/CdS, Ni₂P/C₃N₄ 3种光催化剂最优的产氢活性分别为41.69, 22.45和47.67 μmol·mg^-1·h^-1, 分别为纯TiO₂, CdS和C₃N₄的3.8倍、 10倍和210倍, 表明Ni₂P在光催化HCOOH分解制氢体系中具有普适性. 研究了光催化HCOOH分解制氢的机理, Ni₂P的加入使光生电子从半导体转移至Ni₂P, 提高了光生电子-空穴对的分离效率; Ni₂P还促进了活性物种·OH的生成, 提高了光催化HCOOH分解的产氢速率.     

磷化镍/氮硫双掺杂石墨烯复合材料的制备及电催化析氢性能

采用水热法合成了具有高活性的磷化镍纳米晶(Ni₂P), 并合成了氮、 硫共掺杂石墨烯负载磷化镍纳米催化剂(Ni₂P/NSRGO). 对该催化剂的结构和形貌进行了表征, 并研究其电催化析氢性能. 电化学测试结果表明, Ni₂P/NSRGO复合电催化剂的析氢性能优于Ni₂P/RGO催化剂, 具有较小的Tafel斜率(35 mV/dec)、 较低的过电位(η₁₀=140 mV)和良好的稳定性.     

Ni2P和MoS2催化剂在喹啉加氢脱氮反应中的协同效应

设计实验证明了Ni₂P和MoS₂催化剂在喹啉加氢脱氮反应中存在协同效应,该协同效应能够用氢溢流遥控模型理论解释。Ni₂P//MoS₂的协同因子随反应温度升高而减小,并且略微大于相同反应条件下NiS_x//MoS₂的协同因子。Ni₂P产生的溢流氢能够提高MoS₂催化剂上加氢活性位的数量,促使Ni₂P//MoS₂催化体系增加1,2,3,4-四氢喹啉和5,6,7,8-四氢喹啉加氢生成十氢喹啉的速率,提高其脱氮活性;因此,Ni₂P对MoS₂催化剂是很好的助剂。     

Cu3P辅助诱导Ni2P电荷定向转移和表面重构以获得高效析氧活性

与助催化剂形成异质结,通过调整活性位点的电子结构和电荷输运来提高Ni₂P的电催化活性是一种可行的方法。本文成功构建了一种高效的Cu₃P/Ni₂P异质结催化剂,其中Cu₃P本身仅作为助催化剂,通过调节Ni₂P的电子转移和表面重构来提高电催化活性。结果表明,在10 mA·cm^-2的电流密度下,Cu₃P/Ni₂P具有优异的析氧反应(OER)活性,过电位为213 mV。结合实验结果和理论计算可知,Cu₃P助催化剂可以有效调整Ni中心的电子结构,实现电荷重分布,降低反应能垒,从而显著提高OER催化活性。此外,Cu₃P助催化剂诱导的丰富的晶界和晶格畸变促进了表面重构,形成Ni₅O(OH)₉,为OER提供了有效的活性位点。本工作通过引入助催化剂构建了一种新型异质结电催化剂,为优化过渡金属磷化物的电催化性能提供了一条有效途径。     

Ni2P和MoS2催化剂在二苯并噻吩加氢脱硫反应中的氢溢流效应

对分层装填的Ni₂P//MoS₂催化剂上的二苯并噻吩加氢脱硫反应进行了研究。结果表明,分层装填的Ni₂P/Al₂O₃和MoS₂/Al₂O₃催化剂在二苯并噻吩加氢脱硫反应中存在氢溢流效应,氢溢流有助于提高MoS₂催化剂的活性位密度和加氢脱硫反应速率。由于Ni₂P比NiS_x具有更强的氢分子解离能力,Ni₂P//MoS₂催化体系的氢溢流因子略高于NiS_x//MoS₂;相对于NiS_x,Ni₂P对MoS₂催化剂是更好的助剂。     

Ni2P负载量对Ni2P/Ce-Al2O3催化剂结构及萘加氢性能的影响

采用程序升温还原法制备了一系列Ni₂P/Ce-Al₂O₃催化剂,考察了制备过程中Ni₂P负载量对催化剂结构及萘加氢饱和性能的影响。结果表明,Ni₂P负载量可调控活性组分Ni₂P与载体Ce-Al₂O₃之间的相互作用,进而调变催化剂的比表面积、Ni₂P粒径及催化剂活性位点数量。当Ni₂P负载量（质量分数）为17%时,催化剂具有较大的比表面积（40 m²/g）、较小的Ni₂P粒径（26.3 nm）和最多的活性位点数量（26.7 μmol/g）;同时,该催化剂萘转化率为95%,十氢萘选择性为76%,且活性稳定性良好,这主要归因于催化剂大的比表面积和高的活性位点数量为反应提供了更多的场所。     

Ni2P-NiS双助剂促进g-C3N4光催化产氢动力学

本文通过简单的一步水热法得到Ni₂P-NiS双助催化剂,之后采用溶剂蒸发法将Ni₂P-NiS与g-C₃N₄纳米片结合构建获得无贵金属的Ni₂P-NiS/g-C₃N₄异质结。研究结果表明,优化后的复合材料具有良好的光催化产氢活性,其产氢速率最高可到6892.7 μmol·g^-1·h^-1,分别为g-C₃N₄ (150 μmol·g^-1·h^-1)、15%NiS/g-C₃N₄ (914.5 μmol·g^-1·h^-1)和15%Ni₂P/g-C₃N₄ (1565.9 μmol·g^-1·h^-1)的46.1、7.5和4.4倍。这主要归因于Ni₂P-NiS相比Ni₂P和NiS单体具有更好的载流子转移能力,其与g-C₃N₄形成的肖特基势垒能有效促进光生载流子在二者界面上的分离,同时Ni₂P-NiS能进一步降低析氢过电势,进而显著增强了表面析氢反应动力学。本研究为开发稳定、高效的非贵金属产氢助剂提供了实验基础。     

磷酸铈对磷化镍催化苯酚转移加氢的促进作用

通过氢气原位程序升温还原法制备了一系列不同Ce/Ni摩尔比的CePO₄-Ni₃P及Ni₃P催化剂, 考察了其在苯酚催化转移加氢反应的催化性能. 研究了Ce/Ni摩尔比、 供氢溶剂、 反应温度和反应时间对催化剂性能的影响, 并初步考察了苯酚转移加氢的反应动力学. 研究结果表明, CePO₄的加入能显著提升体相Ni₃P催化苯酚转移加氢的转化率, 且Ce/Ni摩尔比为0.2时促进作用最显著; 在所考察的供氢溶剂中异丙醇展现出最好的性能; 使用CePO₄(0.2)-Ni₃P作为反应催化剂, 异丙醇作为供氢溶剂, 220 ℃下反应6 h, 苯酚转化率和环己醇选择性分别可达93.1%和92.0%.     

Zr改性Ni2P/SBA-15催化剂的制备及其加氢脱氧性能

以正丙醇锆（n）和Zr（SO₄）₂（m）为锆源制备了Zr改性的Ni₂P/ZrO₂-SBA-15（n）和Ni₂P/ZrO₂-SBA-15（m）催化剂,并采用XRD、BET、CO吸附、XPS、NH₃程序升温脱附等手段对催化剂进行了表征。以苯并呋喃（BF）为模型化合物,研究了催化剂加氢脱氧（HDO）性能。结果表明,Zr改性后,形成了新的层状结构的ZrP;Zr的引入有助于生成更多、更小粒径的Ni₂P活性相,催化剂的酸强度和酸量均提高。与正丙醇锆相比,Zr（SO₄）₂为锆源能够获得比表面积大、酸性强、酸量大的催化剂,得到更多的ZrP相、更小粒径的Ni₂P晶粒,暴露更多的Ni活性位点。Ni₂P/ZrO₂-SBA-15（n）和Ni₂P/ZrO₂-SBA-15（m）的BF HDO产率分别为71.5%和85.9%,较Ni₂P/SBA-15分别提高了14.0%和28.4%。催化剂HDO活性、脱氧产物选择性和产率大小顺序为：Ni₂P/ZrO₂-SBA-15（m） > Ni₂P/ZrO₂-SBA-15（n） > Ni₂P/SBA-15。     

Ni2P/Cu(OH)2催化剂的制备及其全解水性能研究

通过化学处理法在泡沫铜基底表面生成Cu(OH)₂纳米线,大大增加了基底材料的表面积和导电性.采用水热法在Cu(OH)₂纳米线表面制备片状Ni-CH/Cu(OH)₂前驱体,对Ni-CH/Cu(OH)₂前驱体进行低温磷化得到多级结构Ni₂P/Cu(OH)₂催化剂.通过扫描电子显微镜(SEM)、X射线光电子能谱仪(XPS)和X射线衍射仪(XRD)对催化剂的物质结构和表面形貌进行了表征.采用线性伏安法、恒电位等技术对催化剂的电化学性能进行测试.在1.0 mol·L^-1 KOH碱性溶液中,当电流密度为10 mA·cm^-2时,Ni₂P/Cu(OH)₂的析氢反应(HER)和析氧反应(OER)过电位分别为133和333 mV,且均具有较好的稳定性.将这种多级结构Ni₂P/Cu(OH)₂催化剂分别用作阳极和阴极进行全解水电解,电流密度达到10 ...     

Pd修饰对Cd0.8Zn0.2S/SiO2光催化甘油水溶液制氢性能的影响

用等体积浸渍法制备了不同Pd负载量的Pd/Cd_0.8Zn_0.2S/SiO₂光催化材料,采用XRD、H₂-TPR、XPS、UV-vis DRS和光催化反应评价等方法对光催化材料的表面结构、光吸收性能以及光催化甘油水溶液制氢反应性能进行了考察。研究结果表明,ZnS与CdS在SiO₂表面形成了Cd_0.8Zn_0.2S固溶体,金属Pd负载未对固溶体Cd_0.8Zn_0.2S/SiO₂的结构造成影响;金属Pd修饰明显地提高了原固溶体的光响应性能,拓展了其吸光域,增强了吸光效率。金属Pd修饰后,Cd_0.8Zn_0.2S/SiO₂的光解甘油水溶液产氢速率显著提高,Pd负载量为0.5%的Pd/Cd_0.8Zn_0.2S/SiO₂具有最佳的光催化甘油水溶液制氢性能,其在紫外光照射下的氢气生成速率为831 μmol/h,较未负载时提高了近四倍;模拟太阳光下为153 μmol/h,较未负载时提高了近两倍。     

设计p-n同质结构实现碳氮光催化剂的全解水性能

非金属氮化碳(CN)因其独特的光催化性能而备受关注.本文利用水热处理、高温烧结、高能球磨和烧结的方法成功制得一种具有混合结构的CN光催化剂.先以三聚氰胺为原料进行水热处理(180℃,24 h),过滤干燥后,转移到高纯氩气保护下的管式炉中,于550℃处理1 h得到CN材料.然后将CN用三聚氰胺和氟化铵水热180℃处理24 h,过滤、干燥、煅烧(550℃,1 h)得到第二种材料.最后将其与CN材料按等比例混合,经高能球磨研磨,再于管式炉中在气氛保护下淬火,得到最终催化剂样品.由于这种结构的界面作用,使CN光催化剂显示出了高的光催化活性.它的产氢效果可以高达17028.82μmol h^–1g^–1,在420 nm光照下,其光量子效率也达到11.2%.随后,采用纳秒级别的时间分辨萤光(PL)光谱测得其荧光寿命为9.9 ns.有助于电子与空穴参与反应更有趣的是,在不加牺牲剂时,该光催化剂具有高效的全解水效果,其产氢效率为270.95μmol h^–1g^–1,产氧效率为115.21μmol h^–1g^–1,有望实际用于全解水反应中.另外,通过紫外可见漫反射光谱,PL光谱和材料的比表面等测试来考察该CN光催化剂效果好的原因.发现该材料具有更高比表面积有更多活性点参与反应.同时,通过电化学测试获得了肖特基曲线和电流-电压曲线,发现该光催化剂里含有少量的pn结构,这种结构使材料在弱光下也会产生光生载流子,实际上它是起到光生载流子的激发作用,即在相同光照下,就会产生更多的光生载流子数量,从而进一步提高了其催化效果.因此,本工作对优化碳氮光催化剂的催化效果有很好的指导意义.     

Pd增强缺陷态TiO2纳米管阵列的光催化产氢性能

通过光还原沉积法, 利用氧空位诱导作用, 在Ni掺杂的缺陷态TiO₂纳米管阵列(TNT-Ni)上得到金属 Pd含量不同的Pd-TNT-Ni催化剂. 采用场发射扫描电子显微镜(SEM)、 X射线光电子能谱(XPS)、 紫外-可见 漫反射(UV-Vis DRS)、 表面光电压(SPV)、 光致发光光谱(PL)和电化学测试等表征手段, 探究了Pd与Ni掺杂的缺陷态TiO₂纳米管阵列之间的强相互作用对其光吸收特性和载流子分离及传输效率的影响, 阐明了强相互 作用对材料光催化活性的调控机理, 提出了Pd增强Pd-TNT-Ni光催化性能的作用机理. 结果表明, 通过光还 原法制备的Pd纳米颗粒尺寸为10~20 nm的Pd₁₂₀-TNT-Ni样品的光响应值为4.22 mA/cm², 是未负载Pd样品光 响应值(1.14 mA/cm²)的3.7倍, 其具有最佳的平均产氢速率(5.16 mmol·g^?1·h^?1), 是TNT样品平均产氢速率 (0.45 mmol·g^?1·h^?1)的12倍, 表明Pd与缺陷态TiO₂纳米管阵列之间的强相互作用驱动了载流子的分离及传输, 且Pd作为电子捕获势阱及反应活性位点, 显著提高了材料的光催化性能.     

Mn0.2Cd0.8S@CoAl LDH S-型异质结构建及其光催化析氢性能研究

构建高效、稳定的异质结光催化剂体系是实现太阳能驱动分解水制氢的有效途径。本研究通过物理混合法将Mn_0.2Cd_0.8S纳米棒与CoAl LDH纳米片进行耦合,成功制备出一种新型的Mn_0.2Cd_0.8S@CoAl LDH (MCCA) S型异质结光催化剂。光致发光光谱和光电流测试结果表明,该异质结在内建电场的作用下可以有效地加快Mn_0.2Cd_0.8S和CoAl LDH界面间光生载流子的分离和电子转移。关键的是,CoAl LDH的引入有效地抑制了光生电子与空穴的复合,从而提高了Mn_0.2Cd_0.8S的光催化产氢活性。最佳CoAl LDH负载量的MCCA-3在5 h内的产氢量为1177.9 μmol。与单独使用纯Mn_0.2Cd_0.8S纳米棒和CoAl LDH纳米片相比,这是一个显著的改进。本研究为合理设计用于光催化制氢的S型异质结光催化剂提供了一条简单有效的途径。     

非贵金属助剂Ni2P修饰类石墨碳氮化物光催化剂增强可见光光催化产氢性能

Energy crisis has become a serious global issue due to the increasing depletion of fossil fuels; therefore, it is crucial to develop environmentally friendly and renewable energy resources, such as hydrogen (H₂), to replace fossil fuels. From this viewpoint, photocatalytic H₂ production is considered as one of the most promising technologies. Noble metal platinum (Pt) can be applied as an efficient cocatalyst for improving the H₂ production performance of photocatalytic systems; however, its high cost limits its further application. Thus, the development of novel, high-activity, and low-cost cocatalysts for replacing noble metal cocatalysts is of great significance for use in photocatalytic H₂ evolution techniques. Herein, we successfully synthesized a Ni₂P/graphite-like carbonitride photocatalyst (Ni₂P/CN) using a conjugated polymer (SCN)_n as precursor for enhanced photocatalytic H₂ production under visible light illumination. Various characterization techniques, including optical and photoelectronic chemical tests, were used to investigate the structural composition, morphology, and light adsorption ability of these materials. X-ray diffraction, Fourier transform infrared spectroscopy (FT-IR), and X-ray photoelectron spectroscopy results showed that Ni₂P/CN nanocomposites with good crystal structure were obtained. Scanning electron microscopy and transmission electron microscopy results revealed that the Ni₂P/CN samples had a typical two-dimensional layered structure, and the Ni₂P nanoparticles were uniformly loaded on the surface of the CN to form a non-noble metal promoter. UV-Vis diffuse reflectance spectra results demonstrated that the loading of Ni₂P nanoparticles effectively enhances the adsorption capacity of CN to visible light. Photoluminescence spectroscopy and photocurrent (PL) results suggested that Ni₂P loading to CN is beneficial for promoting the migration and separation efficiency of photogenerated carriers. Photocatalytic H₂ production was conducted under visible light irradiation with triethanolamine as a sacrificial agent. The results suggest that the Ni₂P/CN composite photocatalysts exhibit excellent photocatalytic reduction performance. In particular, the H₂ evolution rate of the optimal Ni₂P/CN nanocomposite is 623.77 μmol·h^-1·g^-1, which is higher than that of CN modified by noble metal Pt, i.e., 524.63 μmol·h^-1·g^-1. In conclusion, Ni₂P nanoparticles are homogeneously attached to the surface of CN, and a strong interfacial effect exists between them, thereby forming an electron transfer tunnel that greatly inhibits the recombination of photoinduced carriers and promotes the migration of electrons from CN to Ni₂P. In addition, a possible photocatalytic mechanism is proposed based on the experiments and characterizations. This work has profound significance for developing non-noble metal cocatalysts for the substitution of noble metal cocatalysts for high-efficiency photocatalytic H₂ evolution.      

1D Mn0.2Cd0.8S纳米棒/2D Ti3C2纳米片肖特基异质结的构建及光催化产氢性能研究

Sustainable photocatalytic H₂ evolution has attracted extensive attention in recent years because it can address both energy shortage and environmental pollution issues. In particular, metal sulfide solid-solution photocatalysts have been widely applied in photocatalytic hydrogen generation owing to their excellent light harvesting properties, narrow enough band gap, and suitable redox potentials of conduction and valance bands. However, it is still challenging to develop low-cost and high-efficiency sulfide solid-solution photocatalysts for practical photocatalytic hydrogen evolution. Recently, 1D Mn_xCd_1-xS nanostructures have shown superior light absorption, charge separation, and H₂-evolution activity owing to their shortened diffusion pathway of carriers and high length-to-diameter ratios. Thus, 1D Mn_xCd_1-xS nanostructures have been applied in photocatalytic H₂ evolution. However, a single Mn_xCd_1-xS photocatalyst still has some disadvantages for photocatalytic H₂ evolution, such as the rapid recombination of photogenerated electron-hole pairs and low quantum efficiency. Herein, to further boost the separation of photogenerated charge carriers and H₂-evolution kinetics, an in situ solvothermal method was used to synthesize the 1D/2D Schottky-based heterojunctions between the Mn_0.2Cd_0.8S nanorods (MCS NRs) and Ti₃C₂ MXene nanosheets (NSs). Furthermore, various characterization methods have been used to investigate the crucial roles and underlying mechanisms of metallic Ti₃C₂ MXene NSs in boosting the photocatalytic H₂ evolution over the Mn_0.2Cd_0.8S nanorods. X-ray Diffraction (XRD), Transmission Electron Microscope (TEM), High Resolution Transmission Electron Microscopy (HRTEM), element mapping images, and X-ray Photoelectron Spectroscopy (XPS) results clearly demonstrate that hybrid low-cost Schottky-based heterojunctions have been successfully constructed for practical applications in photocatalytic H₂ evolution. Additionally, the photocatalytic hydrogen evolution reaction (HER) was also carried out in a mixed solution of Na₂SO₃ and Na₂S using as the sacrificial agents. The highest hydrogen evolution rate of the optimized 1D/2D Schottky-based heterojunction is 15.73 mmol·g^-1·h^-1, which is 6.72 times higher than that of pure MCS NRs (2.34 mmol·g^-1·h^-1). An apparent quantum efficiency of 19.6% was achieved at 420 nm. The stability measurements of the binary photocatalysts confirmed their excellent photocatalytic stability for practical applications. More interestingly, the UV-Vis diffuse reflection spectra, photoluminescence (PL) spectrum, transient photocurrent responses, and Electrochemical Impedance Spectroscopy (EIS) Nyquist plots clearly confirmed the promoted charge separation between the MCS NRs and Ti₃C₂ MXene NSs. The linear sweep voltammetry also showed that the loading of MXene cocatalysts could greatly decrease the overpotential of pure MCS NRs, suggesting that the 2D Ti₃C₂ NSs could act as an electronic conductive bridge to improve the H₂-evolution kinetics. In summary, these results show that the 2D/1D hybrid Schottky-based heterojunctions between metallic Ti₃C₂ MXene NSs and MCS NRs can not only improve the separation of photogenerated electrons and holes but also decrease the H₂-evolution overpotential, thus resulting in significantly enhanced photocatalytic H₂ generation. We believe that this study will inspire new ideas for constructing low-cost Schottky-based heterojunctions for practical applications in photocatalytic H₂ evolution.      

可见光光解H2S产H2的研究——Rh2O3/CdS悬浮体系中硫化物水溶液的光解

在半导体粉末悬浮体系光解水研究中,最常用的半导体粉末是CdS和TiO₂。前者光谱响应好,可见光即可激发,但易于光腐蚀;后者稳定性好,但禁带宽,仅紫外光可激发。从不同角度改善这二者的性能,一直为人们所关注。在CdS上沉积RuO₂,并选择适宜的反应以抑制CdS的光腐蚀^[1];应用掺杂的方法,使TiO₂的光谱响应扩展至可见区,已取得进展。     

Preparation of a MWCNTs/ZnIn2S4 composite and its enhanced photocatalytic hydrogen production under visible-light irradiation

Multiwalled carbon nanotubes (MWCNTs) and ZnIn(2)S(4) composites were prepared by a facile hydrothermal method, which was used for hydrogen production under visible-light (λ≥ 420 nm) irradiation. The obtained MWCNTs/ZnIn(2)S(4) composites were characterized by X-ray diffraction (XRD), thermogravimetric and differential scanning calorimetry analyses (TG-DSC), field emission scanning electron microscopy (FESEM), high-resolution transmission electron microscopy (HRTEM), energy-dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), UV-vis diffuse reflectance absorption spectra (DRS), Fourier transform IR spectroscopy (FTIR) and Photoluminescence spectra (PL). It was found that the MWCNTs were embedded into the interior of floriated ZnIn(2)S(4) microspheres. The effects of the composite ratio in the MWCNTs/ZnIn(2)S(4) on the photocatalytic activity for hydrogen production were investigated. The results show that the 3 wt% MWCNTs/ZnIn(2)S(4) composite reaches its maximum photocatalytic hydrogen production efficiency with an apparent quantum efficiency as high as 23.3% under 420 nm light irradiation. The significantly enhanced photoactivity for the present composite originates from the synergetic effect of its component intrinsic properties. A possible mechanism of the MWCNTs/ZnIn(2)S(4) composite as a photocatalyst for H(2) evolution was proposed.     

Ni5P4/g-C3N4复合光催化剂的制备及光催化性能

使用尿素、 红磷和氯化镍为原料, 通过一种简单的焙烧方法合成了Ni₅P₄/g-C₃N₄光催化剂. 该催化剂形成的异质结可以降低界面电阻, 有效抑制光生电子-空穴对复合率. 以罗丹明B模拟污染物进行降解测试, 发现3NPC的反应速率常数最高, 几乎是g-C₃N₄的7倍, 并具有最高的光催化产氢能力, 制氢速率高达1013.88 μmol·g^-1·h^-1, 明显高于g-C₃N₄(664.38 μmol·g^-1·h^-1).