基于温度的酶注射式葡萄糖生物传感器检测方法研究

针对酶注射式葡萄糖生物传感器在实际使用中因为标定液与被测液的温度不同而引起的测量结果不准确问题,提出一种基于温度的葡萄糖浓度检测方法.首先根据酶促反应动力学建立目前酶注射式葡萄糖生物传感器浓度检测模型,之后利用阿伦尼乌斯公式建立温度与浓度检测动力学模型中未知参数之间的关系,并将此关系代入浓度检测动力学模型中,以建立基于温度的浓度检测新模型.此模型以温度与酶促反应的电流初始斜率为输入值,以被测葡萄糖浓度为输出值,利用此模型提出了以反应混合液的温度和反应初始电流斜率推导被测液浓度的检测方法.利用改进的检测方法进行检测,不仅能够降低温差的影响,提高检测的准确性,还可以省略常规检测中的人工标定,避免人工标定所需的取样探头拆卸步骤,更加有利于在线使用.分别在25.0,30.0和42.0℃下检测1.5 mg/mL和2.5 mg/mL葡萄糖溶液,利用原检测方法与基于温度的检测方法进行检测,结果表明,基于温度的检测方法回收率均在95.0％以上,明显优于原检测方法.     

光导纤维胆固醇生物传感器的研究

将胆固醇酯酶、胆固醇氧化酶和辣根过氧化物酶通过戊二醛交联反应,固定在牛血清蛋白上,制成光纤胆固醇生物传感器的传感膜.此传感器偶合了胆固醇酯水解、胆固醇的氧化和鲁米诺同过氧化氢的化学发光等3种酶催化反应,通过光纤输出的化学发光信号进行检测.测定总胆固醇和自由胆固醇的线性范围均为0.5～20μg/mL,检测下限为0.1μg/mL,响应时间为2min,寿命在2个月以上,适用于血清中总胆固醇和游离胆固醇的测定.     

菲涅耳反射型光纤生物传感器研究

构建了一种基于菲涅耳反射原理的光纤生物传感器,以生物素-链霉亲和素体系为模型验证了其进行生物传感的可行性.首先,利用硅烷偶联剂,在切平整的普通单模光纤端面修饰上生物素,将其作为吸附链霉亲和素的生物敏感膜.然后,将光纤端面浸入不同浓度的链霉亲和素溶液中,测量宽带光源经过光纤端面反射后的光谱.实验结果表明,反射光谱的相对功率与链霉亲和素溶液浓度之间呈线性关系,测量得到灵敏度为15.38 dB/(mg/mL).用牛血清白蛋白代替链霉亲和素,测量得到的反射光谱曲线与在之前浸入生物素后的反射光谱曲线基本重合,证明此生物传感器的选择性好.最后以人免疫球蛋白G与山羊抗人免疫球蛋白G体系验证了此结构进行生物传感的实用性.     

基于多壁碳纳米管增敏材料的辣根过氧化物酶分子印迹电化学传感器的制备及对H2O2的检测

以辣根过氧化物酶(HRP)为蛋白质模板分子, 邻苯二胺(o-PD)为聚合单体, 首先将预先羧基化的多壁碳纳米管(MWCNTs)通过阶跃电位法电沉积在玻碳电极上作为增敏材料, 然后在该电极上电聚合含HRP的邻苯二胺电沉积液形成一层聚合膜, 去除模板化合物后, 制得对HRP具有特异性识别能力的分子印迹聚合物(MIPs)膜; 利用聚邻苯二胺(POPD)的自探针效应构建了分子印迹电化学传感器. 该传感器的响应电流与HRP浓度在1.0×10 ^-10~1.0×10 ^-5 mg/mL范围内有良好的线性关系, 相关系数为0.991, 检出限为1.5×10 ^-11 mg/mL(S/N=3); 该传感器的响应电流与H₂O₂浓度在4.0×10 ^-7~1.4×10 ^-5 mol/L范围内有良好的线性响应, 相关系数为0.992, 检出限为2.6×10 ^-7 mol/L(S/N=3), 将该传感器用于实际样品H₂O₂的检测, 回收率在91.2%~97.1%之间. 建立了基于MIPs膜的HRP和H₂O₂双分析物传感器的制备方法, 该方法可应用于酶及其酶促底物双分析物传感器.     

基于酶催化银沉积质量放大的血吸虫压电免疫传感器的研究

发展了一种基于酶催化金属银沉积信号放大的新型高灵敏气相压电免疫传感检测技术.先将血吸虫抗原(SjAg)共价固定在石英晶体表面,制备得到血吸虫压电免疫传感器.检测时,在晶振上滴加不同浓度的待测血吸虫抗体,再将碱性磷酸酶标记的二抗通过夹心方式结合到传感器表面.然后利用碱性磷酸酶催化磷酸化的抗坏血酸酯水解从而还原硝酸银,使金属银沉积在晶振表面上,放大传感器的质量响应信号.实验结果表明该传感检测方法可显著提高气相压电免疫传感器的检测灵敏度,传感器对血吸虫抗体的响应线性范围在1～225 ng/mL,检测下限为1 ng/mL.     

滚环扩增型压电石英晶体传感器检测乙型肝炎病毒

通过捕获探针与纳米金膜之间的共价连接, 保证了滚环扩增(RCA)产物始终结合于金膜表面, Phi29 DNA聚合酶的高效扩增和Escherichia coli DNA链接酶的高度精确性使检测达到单碱基识别, 检测灵敏度达到10⁴ copies/mL. 实验结果表明, 与单碱基错配序列相比, RCA可明显增强检测的灵敏度. 该RCA基因传感器操作简单, 灵敏度和特异性较高, 在乙型肝炎病毒的快速检测方面具有一定的开发潜力.     

基于铂纳米颗粒@金属有机骨架纳米模拟酶的无标记电化学赭曲霉毒素适体传感器的构建

以具有类过氧化物酶性质的Pt NPs@Mn-MOF纳米复合材料作为电极基底, 采用丝网印刷电极构建了一种无标记型电化学适体传感器, 用于赭曲霉毒素(OTA)的检测. 利用Pt NPs@Mn-MOF的模拟酶特性, 将其作为电极基底用于捕获OTA适体链, 同时催化H₂O₂还原产生电流响应信号. OTA的引入会减少纳米酶的催化活性位点, 从而导致电流信号降低. 在0.01~300 ng/mL范围内, 随着OTA浓度的增加, 电流响应值逐渐降低; 采用计时电流法检测电流响应信号, 从而间接实现了对OTA的定量检测. 此外, 该生物传感器通过U盘式小型工作站进行检测, 不仅可与电脑连接进行检测, 还可与手机连接进而实现实时检测, 并且其检测灵敏度高、 重现性好, 检出限低至3.33 pg/mL(S/N=3). 该传感器可用于真实玉米样品中OTA的检测, 在真菌毒素现场检测中展现出潜在的应用价值.     

离子色谱法测定空气和废气中NO2、SO2的可行性研究

探讨了使用离子色谱法分析环境空气和废气中NO2、SO2,采用20 mmol/L KOH淋洗液以1 mL/min的流速淋洗,对测定时拟合曲线进行了分析.用该法对质控标准溶液进行测定,其测量值与标准值的偏差在误差范围以内.方法检出限低于0.01 mg/m3,可满足国标GB 3095对环境质量的最高要求.与传统检测方法相比,...     

新型石墨烯/金/功能导电高分子/过氧化氢生物传感器的制备及应用

石墨烯材料和酶的固定对石墨烯基生物传感器性能及应用至关重要.金电极依次放入氧化石墨(0.05 mg/mL)和氯金酸(0.05 mmol/L)溶液中进行控制电位电解,循环以上操作20次后,转移至2,5-二(2-噻吩)-1-对苯甲酸吡咯单体溶液采用循环伏安法进行电聚合形成含有羧基的导电高分子膜,然后以1-(3-二甲氨基丙基)-3-乙基碳二亚胺盐酸盐(EDC)/N-羟基琥珀酰亚胺(NHS)为活化剂将辣根过氧化物酶共价键合在修饰电极表面制备过氧化氢生物传感器.研究表明,交替电沉积得到的石墨烯/金纳米复合材料分散性好,所制备的生物传感器对过氧化氢的氧化还原过程有显著的催化作用.过氧化氢浓度在2～200 nmol/L之间传感器的电流响应与浓度呈线性关系,相关系数(R2)为0.9996,方法的检测限是0.67 nmol/L(S/N=3),灵敏度明显优于现有文献报道.此外,共价键合方式固定酶使传感器的稳定性和方法的重现性大大提高.5 nmol/L的过氧化氢溶液测定20次,相对标准偏差为1.2%.在4℃下储藏3个月传感器电化学响应变化值少于3%.该方法已成功应用于牛奶样品中痕量过氧化氢的测定.     

基于表面重建螺旋型铂铱电极的葡萄糖生物传感器

通过对螺旋型铂铱电极表面进行化学腐蚀和电化学沉积铂纳米粒子实现电极表面的重建和优化,研究了螺旋型铂铱电极在不同腐蚀时间和电沉积时间下的形貌及对过氧化氢(H2O2)的催化活性.对表面重建的工作电极涂覆氧化酶和半透膜,制备出了铂纳米粒子/葡萄糖氧化酶/环氧聚氨酯酶电极,并将其用作葡萄糖传感器的工作电极.传感器计时电流检测结果表明,表面重建后的酶电极传感器对葡萄糖的检测范围扩大为2~45 mmol/L,优于裸铂铱酶电极传感器,电流响应值和灵敏度得到明显提升,同时传感器还具有良好的稳定性和选择性.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.