共查询到20条相似文献,搜索用时 578 毫秒
1.
采用傅立叶变换红外光谱(FTIR)分析了丁戊共聚物的微观结构,发现采用磷酸酯钕体系得到的丁戊共聚物组成不同,其聚丁二烯链节的顺式-1,4含量为93.1%~97.7%,聚异戊二烯链节的顺式-1,4含量为97.0%~ 97.5%.采用差示扫描量热仪(DSC)测试了丁戊共聚物的玻璃化转变温度,发现丁戊共聚物具有良好的耐低温性能,其玻璃化转变温度随着异戊二烯含量的增加而提高,稍偏离Fox方程,经修正得到的公式为Tg=1.03TgIWI+TgBWB.采用Kelen-Tudos法计算得到丁二烯和异戊二烯的竞聚率分别为1.21和0.73,二者乘积接近于1,表明丁戊共聚物为无规结构.利用碳核磁谱(13C NMR)对丁戊共聚物进行分析,对其二元序列进行了归属,计算得到丁戊共聚物的二元序列浓度以及聚丁二烯链节和聚异戊二烯链节的数均序列长度;采用Bernoullian模型和Markov模型验证了丁戊共聚物的序列分布,发现其序列分布更符合Markov模型,表明磷酸酯钕体系催化丁戊共聚合时,活性链有末端效应. 相似文献
2.
3.
通过各种表征手段对用TiCl_4,Ti(OBu)_4/MgCl_2/EB/φSiCl_2/AlEt_3催化剂合成的乙丙丁三元共聚物进行了剖析。发现在一定组成范围内,三元共聚物不含庚烷不溶物。DSC和WAXD分析检测不到结晶相。用~(13)C-NMR技术表征了在相同条件下合成的乙丙、乙丁及丙丁三组二元共聚物的序列分布。结果表明,乙丙和乙丁共聚物的序列结构可用一级Markov分布描述。丙丁共聚物则服从Bernoulli分布,用~(13)C-NMR方法计算了乙丙丁三元共聚物的化学组成,并初步考察了共聚物硫化胶的力学性能。 相似文献
4.
乙烯基单体-N-苯基马来酰亚胺共聚物序列结构研究 总被引:4,自引:3,他引:1
用NMR谱研究了甲基丙烯酸甲酯(MMA)-N-苯基马来酰亚胺(PMI)、苯乙烯(St)-PMI共聚物的序列结构.结果表明,MMA-PMI共聚物单元属无规序列分布,St-PMI共聚物单元属交替序列分布.由1HNMR结果可得MMA-PMI共聚物空间立构部分信息,由13CNMR三单元组实验结果算得的序列长度与末端基理论计算结果一致,且MMA-PMI共聚物链属一级Markov链.由St-PMI共聚物序列长度与末端基理论计算结果的偏差提出更为合理的增长基元反应. 相似文献
5.
《高分子学报》2021,52(5):541-548
采用新癸酸钕(Nd(vers)_3)/氢化二异丁基铝(Al(i-Bu)_2H)/三乙基铝(AlEt_3)/乙基倍半氯化铝(EASC)体系催化丁二烯(Bd)/异戊二烯(Ip)及Bd/Ip/月桂烯(My)共聚合.所得丁戊共聚物组成与催化剂用量无关,单体的投料量与共聚物中此单体的含量几乎呈线性关系;用示差扫描量热仪(DSC)测得共聚物只有一个玻璃化转变,共聚物中Ip含量与其玻璃化转变温度(T_g)呈良好的线性关系.采用Fineman-Ross方法计算竞聚率得到r_1=1.04,r_2=1.18,Kelen-Tüdos法计算竞聚率得到r_1=1.33,r_2=1.59;r_1,r_2均接近于1,说明在此催化体系下反应可以得到无规的丁戊共聚物.利用核磁碳谱对共聚物的序列结构进行了分析和归属,采用Bernoulli模型和一级Markov模型验证共聚物的序列结构,通过比较数均序列长度,一级Markov模型计算得到的序列长度与核磁计算的实际值更接近. Bd/Ip/My三元共聚合时,所得共聚物中My单元含量随着投料比的增加而增加,其DSC曲线上只有一个玻璃化转变,T_g值随着My含量的增加而稍增加. 相似文献
6.
7.
8.
稀土催化丁二烯-异戊二烯共聚物的序列分布 总被引:1,自引:1,他引:1
用~(13)C-NMR方法研究了不同稀土元素聚合丁二烯-异戊二烯共聚物的序列分布。定量地求得丁-戊共聚物二元组分布及数均序列长度数据。证明以Nd、Pr及Ce为催化剂的共聚物分布较好地服从Bernoullian模型,以Y、Sm、Dy及Gd为催化剂的共聚物与Bernoullian分布有些偏离。 相似文献
9.
由聚对苯二甲酸乙二酯(PET)和对-乙酰氧基苯甲酸制得的PET/PHB共聚酯代表了一类序列结构较一般二元共聚物复杂的共聚体系.在揭示了这类共聚物与序列分布有关的诸概率参数中只有一个是独立的之后,定义了参数B_q来描述此类共聚物的无规度.并指出,共聚物B_q=b时的序列分布,可以从一般二元共聚物无规度B=b时的序列结构加以推断. 相似文献
10.
以甲基丙烯酸甲酯(MMA)、可聚合乳化剂马来酸酐衍生物磺酸钠(M12)和可聚合紫外线吸收剂2-羟基-4-(3-甲基丙烯酰氧基-2-羟基丙氧基)苯甲酮(BPMA)为原料,采用乳液聚合方法制备了P(MMA-M12-BP-MA)共聚物乳液。通过转化率、红外光谱、以及紫外吸收光谱测定,分别研究了M12含量对聚合反应速率的影响、所得共聚产物的结构、以及共聚物乳液和共聚物紫外吸收特性。结果表明,随M12含量增大,聚合反应速率增加;BPMA含量增大有利于提高共聚物乳液和共聚物紫外吸收性能。 相似文献
11.
Christian Pichot Marie-France Llauro Quang-Tho Pham 《Journal of polymer science. Part A, Polymer chemistry》1981,19(10):2619-2633
The compositions and sequence distributions of vinyl acetate–butyl acrylate copolymers obtained with batch and semicontinuous emulsion polymerizations have been studied by 1H and 13C NMR. The batch process gives heterogeneous copolymers while with the semicontinuous one the sequence distribution is statistical. These differences in sequence distributions have been related to the physical properties of the copolymers. 相似文献
12.
13.
Brigitte Florin-Michel Marie-France Llauro R. Spitz Q.-T. Pham 《European Polymer Journal》1979,15(3):277-283
Ethylene 1-hexene copolymers obtained by catalytic polymerization have been examined by 1H and 13C NMR. Copolymer compositions have been determined by 1H NMR and i.r. and the sequence distributions for 1-hexene by 13C NMR. Variations of the copolymer microstructure have been related to the experimental conditions for copolymerization. 相似文献
14.
15.
J. R. Ebdon S. H. Kandil K. J. Morgan 《Journal of polymer science. Part A, Polymer chemistry》1979,17(9):2783-2790
The vinyl acetate centered triad fractions of some free radically prepared ethylene–vinyl acetate and styrene–vinyl acetate copolymers have been determined from the patterns of vinyl acetate methine carbon peaks in their 13C nuclear magnetic resonance (NMR) spectra. The positions and shapes of the carbonyl bands in the infrared (IR) absorption spectra of the copolymers recorded in chloroform are shown to depend on the compositions of the copolymers and on the proportions of the various vinyl acetate centered triads. Infrared absorption measurements may thus be used in part to characterize the monomer sequence distributions of these copolymers. 相似文献
16.
单茂钛/MAO体系催化乙烯/丙烯共聚合研究Ⅱ.乙烯/丙烯共聚物的核磁共振分析 总被引:1,自引:0,他引:1
用13C NMR测定了由单茂基钛化合物 /mMAO催化体系制备的乙烯 /丙烯共聚物大分子链的立体结构和单体序列分布 ,计算了单体的竞聚率r1=7 91± 0 0 6 ,r2 =0 135± 0 0 3 ,其乘积r1r2 ≈ 1.Fineman Ross计算得到的单体竞聚率与13C NMR测定值相近 ,即r1=7.94,r2 =0 .134,其乘积r1r2 =1 0 4.这表明共聚物是立构无规的 .共聚物经溶剂萃取后 ,乙醚可溶和己烷可溶两个级分中单体的序列分布和竞聚率略有不同 .乙醚可溶级分中丙烯链段稍长 ,而己烷可溶级分中乙烯链段稍长 相似文献
17.
茂锆载体催化剂下的乙烯/辛烯共聚及聚合物的^13C NMR研究 总被引:3,自引:0,他引:3
茂锆载体催化剂下的乙烯/辛烯共聚及聚合物的~(13)CNMR研究刘胜生,于广谦,黄葆同(中国科学院长春应用化学研究所长春130022)关键词茂锆载体催化剂,共聚,序列分布,~(13)CNMR由于茂锆催化剂具有高活性,单一活性中心等特点[1,2],并且能... 相似文献
18.
19.
Fernanda F. Nunes Escher Griselda Barrera Galland Mrcio Ferreira 《Journal of polymer science. Part A, Polymer chemistry》2003,41(16):2531-2541
Many studies have been reported on the 13C NMR characterization of ethylene–α‐olefin copolymers, but only a few have been reported on terpolymers. The incorporation of an α‐olefin into the polyethylene chain changes the structure and, consequently, the properties of the polymer obtained. Looking for new products, we obtained a series of ethylene–propylene–1‐decene terpolymers with the metallocenic system rac‐ethylene bisindenyl zirconium dichloride/methylaluminoxane. We performed a complete 13C NMR characterization of these terpolymers qualitatively and quantitatively. Here we present a detailed study of the 13C NMR chemical shifts, triad sequence distributions, monomer average sequence lengths, and reactivity ratios for these terpolymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2531–2541, 2003 相似文献
20.
James C. Randall 《Journal of Polymer Science.Polymer Physics》1977,15(8):1451-1473
Monomer distributions and number-average sequence lengths are determined from 13C nuclear magnetic resonance (NMR) data for 1,4- and 1,2-butadiene additions and styrene additions in a series of four hydrogenated butadiene–styrene copolymers. The monomer distribution is expressed in terms of the six unique days from which it is possible to calculate the number-average sequence length of each monomer type. Carbon-13 NMR spectral assignments are given and the techniques for making the assignments are discussed. The method presented could, in principle, be applied to any copolymer or terpolymer. Limitations that are encountered in the analysis of hydrogenated butadiene–styrene copolymers high in 1,2 additions are discussed. 相似文献