Mo/HZSM-5上甲烷芳构化的诱导期钼物种的部分还原和碳物种的沉积

在无氧条件下,Mo/HZSM-5催化剂表现出良好的催化甲烷芳构化性能.采用脉冲反应,TPSR,TPR,UV Raman,XRD和BET等手段研究了反应的诱导期.BET和XRD结果表明,钼物种较好地分散于分子筛的外表面和孔道内.TPSR和TPR结果表明,在苯产生之前催化剂上至少有两种不同形式的高价钼物种被部分还原.参照MoO3/Al2O3的TPR结果,认为这两种高价钼物种可能是以多聚酸盐和微晶形式存在的MoO3.UV Raman光谱表明,催化剂表面确实存在八面体配位的多聚酸盐铝物种;而XRD没有检测到微晶铝物种的存在.脉冲反应结果表明,预还原可以缩短反应诱导期,而某种类型积碳的存在对缩短反应诱导期更为有利.根据以上结果,认为诱导期是反应活性相逐渐形成的过程,包括高价钼物种的部分还原和碳物种的沉积,而后者可能对反应更为重要.     

处理条件对Mo/HZSM-5催化剂结构及性能的影响

使用付立叶变换红外光谱和固体高分辨核磁技术，考察了在不同处理条件下，甲烷无氧芳构化催化剂Ｍｏ／ＨＺＳＭ５分子筛骨架结构的变化情况．结果显示，较高的焙烧温度和较高的预处理温度，都会造成催化剂中担载的钼物种对分子筛骨架铝的严重抽提，特别是在钼物种含量较高时，这种情况更明显．以不同担体及不同钼物种构成的前驱态催化剂的催化反应评价结果表明，以微晶状态存在的ＭｏＯ３和与担体间以相对较弱作用力存在的高分散钼物种，在反应过程中被活化成具有催化活性钼物种的几率更大；而晶相状态的Ａｌ２（ＭｏＯ４）３以及与载体间存在较强相互作用力的钼物种，在甲烷无氧芳构化过程中不起主要催化活性作用．计算得出，甲烷无氧脱氢芳构化反应的表观活化能为８９．８ｋＪ／ｍｏｌ．     

水蒸气存在时Mo/HZSM-5催化剂上的甲烷芳构化反应性能

研究了水蒸气存在条件下Mo/HZSM-5沸石分子筛催化剂上的甲烷芳构化反应行为,发现水蒸气的引入可以明显地降低甲烷芳构化反应的起始温度,从而在较为温和的条件下实现甲烷的活化.适量水蒸气的加入可以在一定程度上改善Mo/HZSM-5催化剂的稳定性,过量水蒸气的引入则会抑制甲烷芳构化反应.在反应温度为973 K时,引入适量的水蒸气对芳构化反应产物的分布没有明显影响在低温条件下的甲烷芳构化反应过程中检测到有乙烯生成,该结果支持了甲烷芳构化反应可能经历了乙烯这一中间产物的机理.实验结果还表明,水蒸气对催化剂上的积炭量没有明显的影响.     

甲烷在Mo/HZRP-1催化剂上无氧脱氢芳构化反应 Ⅰ.Mo/HZRP-1催化剂的催化性能和积炭行为

用高硅含磷五员环沸石分子筛(商品代号HZRP-1)作为载体,制备了Mo/HZRP-1催化剂.与Mo/HZSM-5相比,Mo/HZRP-1对甲烷无氧脱氢芳构化反应也表现出较好的催化性能.实验过程中,在反应气中添加N2作为内标物,给出包括甲烷在Mo/HZRP-1上的结焦量、转化率及各产物选择性在内的总碳物料平衡计算结果.考察了不同Mo担载量对催化剂性能和积炭行为的影响;重点考察了不同温度焙烧后20%Mo/HZRP-1催化剂的性能和积炭行为.在反应的初始阶段,6%Mo/HZRP-1表现出很高的活性:反应进行30 min时,甲烷转化率为11%,芳烃选择性达81%,而催化剂的结焦选择性仅为12%.BET,NH3-TPD和催化反应等表征结果表明:Mo物种的数量和状态,分子筛的酸强度和酸量以及分子筛的孔道结构是决定甲烷无氧脱氢芳构化反应性能和积炭行为的关键因素.     

用FT-IR技术研究Mo/HZSM-5分子筛的骨架结构

在两种不同硅铝比的ＨＺＳＭ５分子筛上担载不同量的钼物种后，对甲烷无氧脱氢芳构化反应呈现出不同的催化活性．使用ＦＴＩＲ技术测定了催化剂样品的骨架结构，结果表明，在两种分子筛载体上，钼物种的存在状态及其与载体间的相互作用各不相同；分子筛载体的酸性环境决定了浸渍时钼物种的可能存在状态．     

MoO3纳米带修饰MCM-22催化甲烷无氧芳构化反应

利用天然气生产芳烃是一个有吸引力的课题，这个过程需要具有高性能活性位点的催化剂，以活化稳定的碳氢键．在甲烷直接转化方法中，将甲烷无氧脱氢芳构化(MDA)转化为高附加值芳烃(如苯、甲苯和萘)是甲烷增值的有效途径．本研究采用MoO₃纳米带作为Mo源，微孔分子筛MCM-22作为载体制备双功能Mo基催化剂，结果表明MoO₃纳米带高度分散在分子筛内部，与分子筛中Br?nsted酸中心结合形成有效活性中心，改善了甲烷无氧脱氢芳构化反应的催化活性，提高了催化剂的稳定性．在甲烷无氧脱氢芳构化反应测试中，当MoO₃纳米带的负载量质量分数为6%时，N-Mo-HMCM-22催化剂催化的甲烷转化率达到14.1%，苯产率可达8.2%．本研究为合成高性能、稳定的MDA催化剂提供了一种更为简易的策略．     

负载型钼基催化剂上甲烷,乙烷无氧芳构化反应研究

研究了不同载体钼基催化剂上甲烷，乙烷的无氧芳构化反应。在所采用的载体中，ＨＺＳＭ－５具有最佳性能，对甲烷的芳构化反应，Ｍｏ／ＨＺＳＭ－５催化剂表现出较高的活性和芳烃选择性；而Ｍｏ／Ａｌ２Ｏ３或Ｍｏ／ＳｉＯ２催化剂则相对较差。对于乙烷的反应，钼物种的存在更有利于甲烷或乙烯的生成，芳烃选择性相对较低。钼物种较强的断键能力可能是使甲烷Ｃ－Ｈ键活化的原因。     

用FT—IR技术研究Mo／HZSM—5分子筛的骨架结构

在两种不同硅铝比的ＨＺＳＭ－５分子筛上担载不同量的钼物种后，对甲烷地氧脱氢芳构化反应呈现出不同的催化活性，使用ＦＴ－ＩＲ技术测定了催化剂样品的骨架结构，结果表明，在两种族中分子筛载体上，钼物处的存在状态及其与载全校是的相互作用各不同相；分子筛载的酸性环境决定了浸渍时钼物种的可能存在状态。     

Mo/HZSM-5催化剂上甲烷无氧芳构化反应——HZSM-5分子筛脱铝的影响

采用两种不同的脱铝方法对HZSM-5分子筛进行了预处理,并利用MAS NMR和吸附吡啶的FT-IR对分子筛的结构和酸性质进行了表征,考察了分子筛的脱铝程度对Mo基催化剂上甲烷芳构化反应性能的影响.结果表明,HZSM-5分子筛的酸性过强或B酸量不足,均会导致催化剂严重积炭,但积炭成因不同.母体HZSM-5分子筛上的强B酸中心的存在可促使催化剂上反应中间物种深度脱氢,造成催化剂在反应过程中严重积炭.经水热处理的HZSM-5分子筛,骨架铝脱出严重,造成B酸活性中心不足以及部分微孔阻塞,不利于C2中间物种芳构化,导致芳烃选择性显著降低.经高温N2处理的HZSM-5分子筛,骨架铝脱出相对缓和,在消除母体分子筛上强B酸中心的同时,保留了较多的弱B酸中心,既可满足C2中间物种芳构化反应的需要,又可有效抑制催化剂积炭,导致甲烷芳构化反应性能显著改善.     

Mo基分子筛催化剂及甲烷无氧芳构化

本文综述了甲烷无氧芳构化反应及Mo基分子筛催化剂的研究进展。在众多的催化剂中以Mo基分子筛催化性能最佳。概括了催化剂中关于MoO_<em>x前躯体结构和其在分子筛中落位,Mo₂C物种和诱导期等;讨论了反应中涉及的中间产物、双功能机理以及催化剂失活等问题;归纳了催化剂制备过程中制备方法、焙烧温度与时间、Mo载量和分子筛硅铝比以及催化剂预处理对反应活性的影响;综述了提高催化剂催化性能和反应性能的各种方法,并对其分析,同时介绍了两种催化剂再生方法。最后,依据本实验室研究进展,对甲烷芳构化从工艺角度进行一些可行性讨论,并提出相关问题和展望。     

添加金属对MoO3/Al2O3 碳化过程的影响

The investigation on MoO3 / Al2O3 sample or its modifiers with nickel,copper or potassium was performed using temperature programmed surface reaction（TPSR）technique and measurements of BET surface area. The results indicate that addition of nickel promotes the methane reduction,further the carburization,of MoO3,and addition of nickel also promotes the activation of methane over the surface of oxycarbide or carbide due to the increase of active sites per unit area and intrinsic activity of catalytic centers. This is favorable to the conversion of methane. The addition of copper promotes the methane reduction,further the carburization,of MoO3 to some extent,while the introduction of copper also accelerates the sintering of catalyst to a degree. Thus copper doped carbide catalyst exhibits its exceptionally catalytic performance. However,potassium prevents the MoO3 from reduction with methane,which is unfavorable to the carburization. Potassium also restrains methane from being activated over the surface of oxycarbide or carbide. MoO3 / Al2O3 doped with potassium is of lower specific area,which originates from its boosting sintering of catalyst. This caauses the inferior methane conversion over potassium doped carbide catalyst.     

DEHYDROGENATION AND AROMATIZATION OF METHANE IN THE ABSENCE OF OXYGEN OVER DOPED Mo/HZSM-5 CATALYSTS

研究了在Ｍｏ／ＨＺＳＭ－５催化剂上添加助剂以及不同的反应预处理温度对甲烷无氧脱氢芳构化反应的影响。实验结果表明，由于第二组分的添加，Ｍｏ／ＨＺＳＭ－５催化剂的活性和选择性都得到了较大程度的改善。预处理温度是影响催化剂反应性能的关键因素。Ｍｏ－Ｒｕ／ＨＺＳＭ－５催化剂经过８７３Ｋ空气预处理后，甲烷在９７３Ｋ的转化率约为１０％，催化剂的稳定性也得到较大程度的提高。ＴＰＳＲ实验结果表明，Ｒｕ的加入降低了芳烃生成的温度。ＴＰＯ和ＤＴＡ实验结果表明，在Ｍｏ－Ｒｕ／ＨＺＳＭ－５催化剂上可生成较多的碳物种，结合反应结果，可以认为反应过程中生成的碳物种对甲烷的无氧脱氢芳构化反应是起积极作用的     

The structure of active sites in a molybdenum/zeolite catalyst for methane dehydroaromatization: a DFT study

Mononuclear active sites in molybdenum-zeolite catalysts for methane dehydroaromatization were studied within the framework of the density functional theory (DFT). The optimized structures of mononuclear sites in molybdenum oxide, molybdenum oxycarbide, and molybdenum carbide were obtained. A mechanism of carbidization i.e., formation of molybdenum oxycarbide and molybdenum carbide from molybdenum oxide was proposed. Carbidization using three (radical, cationic, and anionic) structures of mononuclear active sites was studied. It was found that the anionic structure provides the best conditions for methane activation on the mononuclear active site.     

甲烷干气重整反应中镍基催化剂上表面积碳研究(英文)

镍基催化剂上积碳是甲烷干气重整反应急需解决的关键问题。实验采用ＴＰＳＲ、ＴＰＤ、ＸＰＳ和脉冲反应等方法系统研究了镍基催化剂表面积碳的形态和特点。热力学研究表明,在５７３ Ｋ到１２７３ Ｋ的温度范围内,催化剂的表面积碳是不可避免的。ＴＰＳＲ、ＸＰＳ和ＴＰＤ研究表明,甲烷在催化剂表面裂解将形成至少三种碳物种：Ｃα、Ｃβ和Ｃγ。这三种碳物种具有不同的表面迁移能力、热稳定性和反应活性。其中,Ｃα物种在甲烷干气重整反应中是一种非常活泼和重要的中间体;Ｃγ物种则可能是表面积碳的前驱物：部分脱氢的Ｃβ物种能够与Ｈ２或ＣＯ２反应生成ＣＨ４或ＣＯ。     

Investigation on the Performance of Supported Molybdenum Carbide for the Partial Oxidation of Methane

The performance of uspported and unsupported molybdenum carbide for the partial oxidation of methane (POM) to syngas was investgated.An evaluation of the catalysts indicates that bulk molybdenum carbied has a higher methane conversion during the initial stage but a lower selectivity to CO and H2/CO ratio in the products.The rapid deactivation of the catalyst is also a significant problem.However,the supported molybdenum carbide catalyst shows a much higher methane conversion,increased selectivity and significantly improved catalytic stability.The characterization by XRD and BET specific area measurements depict an improved dispersion of molybdenum carbide when using alumina as a carrier.The bulk or the supported molybdenum carbide exists in the β-Mo2C phase,while it is transformed into molybdenum dioxide postcatalysis which is an improtant cause of molybdenum carbide deactivation.     

Methane Activation by Diatomic Molybdenum Carbide Cations

Metal carbide species have been proposed as a new type of chemical entity to activate methane in both gas‐phase and condensed‐phase studies. Herein, methane activation by the diatomic cation MoC⁺ is presented. MoC⁺ ions have been prepared and mass‐selected by a quadrupole mass filter and then allowed to interact with methane in a hexapole reaction cell. The reactant and product ions have been detected by a reflectron time‐of‐flight mass spectrometer. Bare metal Mo⁺ and MoC₂H₂⁺ ions have been observed as products, suggesting the occurrence of ethylene elimination and dehydrogenation reactions. The branching ratio of the C₂H₄ elimination channel is much larger than that of the dehydrogenation channel. Density functional theory calculations have been performed to explore in detail the mechanism of the reaction of MoC⁺ with CH₄. The computed results indicate that the ethylene elimination process involves the occurrence of spin conversions in the C?C coupling (doublet→quartet) and hydrogen atom transfer (quartet→sextet) steps. The carbon atom in MoC⁺ plays a key role in methane activation because it becomes sp³ hybridized in the initial stages of the ethylene elimination reaction, which leads to much lower energy barriers and more stable intermediates. This study provides insights into the C?H bond activation and C?C coupling involved in methane transformation over molybdenum carbide‐based catalysts.     

铁助剂对Rh-Mn-Li/SiO2催化剂表面上的CO脱附和CO加氢行为的影响

 采用一氧化碳程序升温脱附（CO－TPD）和吸附的一氧化碳加氢程序升温表面反应（TPSR）考察了Fe助剂对Rh基催化剂上CO的脱附行为及吸附CO的加氢行为的影响．CO－TPD实验表明，在Rh／SiO2催化剂上CO有三个脱附峰．在Rh－Mn－Li／SiO2中加入0．05％Fe后，高温脱附CO比Rh／SiO2催化剂上相应的CO量大．增加Fe的负载量，CO的脱附量减少．TPSR实验中，CO加氢反应的主要产物是甲烷．不同组分的催化剂上甲烷的生成温度有如下顺序：Rh／SiO2（482K）＜Rh－Mn－Li／SiO2（489K）＜Rh－Fe／SiO2（494K）＜Rh－Mn－Li－Fe／SiO2（501K）．甲烷峰的产生伴随着CO（s）高温脱附峰的消失，说明甲烷是由强吸附的CO加氢生成的．     

Characterization of Pt-Ru/C catalysts by X-ray absorption spectroscopy and temperature-programmed surface reaction

X-ray absorption spectroscopy (XAS) was employed to characterize carbon black supported Pt-Ru catalysts, which are commercially available to be utilized as the anode of polymeric-electrolyte-membrane fuel cells. Both Pt and Ru were found partially oxidized in the as-received form. Upon exposure to hydrogen at room temperature, the catalysts were completely reduced to the metallic state. The bimetallic nanoparticles on the Pt-Ru/C catalysts possess an inner core enriched in Pt, which is surrounded by a Ru-rich outer shell. Such a core–shell structure retained even at an elevated reduction temperature of 623 K. Temperature-programmed surface reaction (TPSR) was carried out to explore the reactivity of adsorbed CO toward hydrogen on various catalysts. Both the peak temperature of the TPSR profile and the amount of methane generated during the course of TPSR were sensitive to the surface composition of Pt–Ru nanoparticles. In combination of XAS and TPSR results, a slight difference in the nanostructure between two Pt-Ru/C catalysts was manifested.     

Methane Decomposition on the Surface of Molybdenum Nanoparticles at Room Temperature

The decomposition of methane on molybdenum nanoparticles was studied experimentally at room temperature. The molybdenum nanoparticles were synthesized in the gas phase using UV laser photolysis of Mo(CO)6 vapor in a flow reactor. The working part of the flow reactor was equipped with quartz windows for introducing the radiation from a pulsed Nd:YaG laser operating at the fourth harmonic (266 nm) at a frequency of 10 Hz. Methane was used as a carrier gas. As a result of irradiation of a mixture of methane with Mo(CO)6 vapors in the gas phase at room temperature, nanoparticles with sizes of 2–50 nm were synthesized. The phase composition of the nanoparticles included pure molybdenum, molybdenum carbide Mo2C, and molybdenum oxide MoO3. During the reaction, the hydrogen yield was measured with a VG-7 highly sensitive hydrogen analyzer based on a semiconductor metal–dielectric sensor. The measured H2 concentration varied from 5 to 25 ppm depending on the concentration of Mo(CO)6. The possibility of methane decomposition on molybdenum nanoparticles at room temperature was discussed based on the obtained data.