用于甲烷芳构化的Mo/HZSM-5催化剂的活化（英文）

The effect of Mo/HZSM-5 pretreatment at 973 K in inert(He), oxidizing(artificial air), and carburizing(CH4/He mixture) atmospheres on its performance in non-oxidative methane dehydroaromatization(MDA) was investigated. The effect of post-synthesis silylation on deactivation of external acid sites was also studied. Precarburization resulted in increased aromatic selectivity and improved catalyst stability. The benzene selectivity was the highest for the silylated Mo/HZSM-5 catalyst(benzene + naphthalene selectivity after 1 h on stream was close to 100%). The deactivation of precarburized zeolites was less pronounced than that of zeolites heated in air or He. During heating in air or He, larger fractions of the molybdenum oxide species diffused into the micropores than during heating in methane. Carburization of the molybdenum oxide species in the micropores during MDA resulted in the formation of molybdenum carbide particles, and these contributed to pore blocking, making the Brnsted acid sites inaccessible. The formation of molybdenum carbides during heating in methane resulted in a less mobile Mo phase. It is argued that the presence of molybdenum carbide particles in the micropores contributes to rapid catalyst deactivation, in addition to the formation of hard coke on the external surface.     

Activation of Mo/HZSM-5 for methane aromatization

The effect of Mo/HZSM-5 pretreatment at 973 K in inert (He), oxidizing (artificial air), and carbu-rizing (CH4/He mixture) atmospheres on its performance in non-oxidative methane dehydroaroma-tization (MDA) was investigated. The effect of post-synthesis silylation on deactivation of external acid sites was also studied. Precarburization resulted in increased aromatic selectivity and im-proved catalyst stability. The benzene selectivity was the highest for the silylated Mo/HZSM-5 cata-lyst (benzene+naphthalene selectivity after 1 h on stream was close to 100%). The deactivation of precarburized zeolites was less pronounced than that of zeolites heated in air or He. During heating in air or He, larger fractions of the molybdenum oxide species diffused into the micropores than during heating in methane. Carburization of the molybdenum oxide species in the micropores dur-ing MDA resulted in the formation of molybdenum carbide particles, and these contributed to pore blocking, making the Br?nsted acid sites inaccessible. The formation of molybdenum carbides dur-ing heating in methane resulted in a less mobile Mo phase. It is argued that the presence of molyb-denum carbide particles in the micropores contributes to rapid catalyst deactivation, in addition to the formation of hard coke on the external surface.     

Methane Decomposition on the Surface of Molybdenum Nanoparticles at Room Temperature

The decomposition of methane on molybdenum nanoparticles was studied experimentally at room temperature. The molybdenum nanoparticles were synthesized in the gas phase using UV laser photolysis of Mo(CO)6 vapor in a flow reactor. The working part of the flow reactor was equipped with quartz windows for introducing the radiation from a pulsed Nd:YaG laser operating at the fourth harmonic (266 nm) at a frequency of 10 Hz. Methane was used as a carrier gas. As a result of irradiation of a mixture of methane with Mo(CO)6 vapors in the gas phase at room temperature, nanoparticles with sizes of 2–50 nm were synthesized. The phase composition of the nanoparticles included pure molybdenum, molybdenum carbide Mo2C, and molybdenum oxide MoO3. During the reaction, the hydrogen yield was measured with a VG-7 highly sensitive hydrogen analyzer based on a semiconductor metal–dielectric sensor. The measured H2 concentration varied from 5 to 25 ppm depending on the concentration of Mo(CO)6. The possibility of methane decomposition on molybdenum nanoparticles at room temperature was discussed based on the obtained data.     

添加金属对MoO3/Al2O3 碳化过程的影响

The investigation on MoO3 / Al2O3 sample or its modifiers with nickel,copper or potassium was performed using temperature programmed surface reaction（TPSR）technique and measurements of BET surface area. The results indicate that addition of nickel promotes the methane reduction,further the carburization,of MoO3,and addition of nickel also promotes the activation of methane over the surface of oxycarbide or carbide due to the increase of active sites per unit area and intrinsic activity of catalytic centers. This is favorable to the conversion of methane. The addition of copper promotes the methane reduction,further the carburization,of MoO3 to some extent,while the introduction of copper also accelerates the sintering of catalyst to a degree. Thus copper doped carbide catalyst exhibits its exceptionally catalytic performance. However,potassium prevents the MoO3 from reduction with methane,which is unfavorable to the carburization. Potassium also restrains methane from being activated over the surface of oxycarbide or carbide. MoO3 / Al2O3 doped with potassium is of lower specific area,which originates from its boosting sintering of catalyst. This caauses the inferior methane conversion over potassium doped carbide catalyst.     

Bifunctional catalysis of Mo/HZSM-5 in the dehydroaromatization of methane with CO/CO2 to benzene and naphthalene

The catalytic dehydrocondensation of methane to aromatics such as benzene and naphthalene was studied on the Mo carbide catalysts supported on micro- and mesoporous materials such as HZSM-5 (0.6 nm) and FSM-16 (2.7 nm). The Mo catalysts supported on H-ZSM-5 having appropriate micropores (0.6 nm size) and Si/Al ratios (20-70) exhibit higher yields (90-150 nmol/g-cat/s) and selectivities (higher than 74% on the carbon basis) in methane conversion to aromatic products such as benzene and naphthalene at 973 K and 1 atm, although they are drastically deactivated because of substantial coke formation. It was demonstrated that the CO/CO₂ addition to methane effectively improves the catalyst performance by keeping a higher methane conversion and selectivities of benzene formation in the prolonged time-on-stream. The oxygen derived from CO and CO₂ dissociation suppresses polycondensation of aromatic products and coke formation in the course of methane conversion. XAFS and TG/DTA/mass-spectrometric studies reveal that the zeolite-supported Mo oxide is endothermally converted under the action of methane around 955 K to nanosized particles of molybdenum carbide (Mo₂C) (Mo-C, coordination number = 1,R- 2.09 å; Mo-Mo, coordination number = 2.3–3.5;R = 2.98 å). The SEM pictures showed that the nanostructured Mo carbide particles are highly dispersed on and inside the HZSM-5 crystals. On the other hand, it was demonstrated by IR measurements of pyridine adsorption that the Mo/HZSM-5 catalysts having the optimum SiO₂/Al₂O₃ ratios around 40 show the maximum Brönsted acidity among the catalysts with the SiO₂/Al₂O₃ ratios of 20–1900. There is a close correlation between the activity of benzene formation in the methane aromatization and the Brönsted acidity of HZSM-5 due to the bifunctional catalysis.     

Investigation on the Performance of Supported Molybdenum Carbide for the Partial Oxidation of Methane

The performance of uspported and unsupported molybdenum carbide for the partial oxidation of methane (POM) to syngas was investgated.An evaluation of the catalysts indicates that bulk molybdenum carbied has a higher methane conversion during the initial stage but a lower selectivity to CO and H2/CO ratio in the products.The rapid deactivation of the catalyst is also a significant problem.However,the supported molybdenum carbide catalyst shows a much higher methane conversion,increased selectivity and significantly improved catalytic stability.The characterization by XRD and BET specific area measurements depict an improved dispersion of molybdenum carbide when using alumina as a carrier.The bulk or the supported molybdenum carbide exists in the β-Mo2C phase,while it is transformed into molybdenum dioxide postcatalysis which is an improtant cause of molybdenum carbide deactivation.     

Characterization by 27Al NMR, X-ray absorption spectroscopy, and density functional theory techniques of the species responsible for benzene hydrogenation in Y zeolite-supported carburized molybdenum catalysts

Carburized molybdenum catalysts supported on a dealuminated NaH-Y zeolite were prepared by carburization under a 20% methane in hydrogen flow of two precursors obtained by adsorption of molybdenum hexacarbonyl, one containing 5 wt % and the other 10 wt % Mo, and a third one was prepared by impregnation with aqueous ammonium heptamolybdate, containing 5 wt % Mo. The three catalysts displayed very distinct behaviors in the benzene hydrogenation reaction at atmospheric pressure and 363 K. By using XANES spectroscopy at the molybdenum L edge, EXAFS and XANES spectroscopy at the molybdenum K edge, and 27Al solid-state NMR spectroscopy, it was shown that different carburized molybdenum species exist in each sample. In the catalyst containing 10 wt % Mo, formation of molybdenum carbide nanoparticles was observed, with an estimated diameter of 1.8 nm. In the catalyst containing 5 wt % Mo and prepared by carburization of adsorbed molybdenum hexacarbonyl, formation of molybdenum oxycarbide dimers is proposed. In the latter case, density functional theory calculations have led to a dimer structure which is compatible with EXAFS results. In the catalyst prepared by impregnation with ammonium heptamolybdate solution followed by carburization, the molybdenum seems to interact with extraframework alumina to produce highly disordered mixed molybdenum-aluminum oxycarbides.     

甲烷无氧芳构化催化剂的活性相生成研究

利用在线质谱分析检测了在各种催化剂上甲烷的程序升温表面反应(TPSR)过程中不同物种的行为.结果表明,MoO₃向Mo₂C的转变阻碍了甲烷的活化及其芳构化.如果这个转变过程在TPSR反应前发生,甲烷活化和苯生成的温度将大大降低(分别为760K和847K).通过比较担载在不同分子筛上钼物种的催化行为发现,甲烷的初始活化是这个反应速率的决定步骤.只有具备合适的钼价态,Bro-nsted酸性以及特殊的分子筛孔道结构的催化剂才能使甲烷芳构化反应高效进行.     

钴掺杂对碳化钼催化噻吩加氢脱硫性能的影响

以MoO3和CoMo混合氧化物为前驱体, 制备了碳化钼和碳化钼-钴催化剂, 采用XRD, BET, SEM和XPS等技术对其进行了表征, 研究了Co掺杂对碳化钼催化剂噻吩加氢脱硫性能的影响. 结果表明, 掺入适量的Co后制得的CoMo双金属混合氧化物为MoO3和CoMoO4的两相混合体, 经CH4/H2气氛程序升温还原碳化反应生成共生共存的Co-Mo2C, Co以金属细颗粒的形态均匀地分散在生成的Mo2C组分之间. 在共生过程中含Co物种的掺入可降低制备碳化钼所需要的还原碳化温度, 使制备的碳化钼颗粒变小, 比表面积增大, 表面Mo2+含量增多, 从而对碳化钼的噻吩加氢脱硫活性有较好的促进作用, Co的添加量以Co/Mo摩尔比为0.2左右较为适宜. 用化学共沉淀法制得的Co-Mo2C共生共存体系的噻吩加氢脱硫反应活性, 好于由金属Co与Mo2C机械混合法制得的Co+Mo2C二相共存体系. 这表明当两个活性相共存时, 只有经过相互共生过程才能发挥其最佳的协同效应.     

镍助剂对碳化钼催化剂的二苯并噻吩加氢脱硫性能的影响

 将MoO3和Ni-Mo混合氧化物在CH4/H2气氛中程序升温还原碳化制备了相应的碳化钼和碳化镍钼催化剂, X射线粉末衍射表征其物相分别为β-Mo2C和Ni-Mo2C. 考察了Ni助剂对碳化钼催化剂的制备及二苯并噻吩加氢脱硫反应性能的影响. 结果表明, Ni助剂的加入降低了碳化钼催化剂所需的还原碳化温度,提高了催化剂的比表面积,并对其二苯并噻吩加氢脱硫反应活性有明显的促进作用. Ni助剂添加量以Ni/Mo原子比为0.3为宜,此时Ni和Mo之间的催化协同效应达到最佳. 当反应压力为3.0 MPa, 反应温度为330 ℃, 空速8 h-1, H2/原料液体积比为500∶1时, 625 ℃还原碳化制备的碳化镍钼催化剂对0.6%二苯并噻吩/环己烷溶液的二苯并噻吩转化率达到96.25%, 较相应的碳化钼催化剂提高了1.57倍.     

盐封后碳化钼电催化剂的制备及其氢析出性能

Molybdenum carbide is regarded as an excellent substitute for Pt-based catalysts in the hydrogen evolution reaction (HER), owing to its low cost, superior catalytic performance, and long-term stability. In this work, salt-sealed molybdenum carbide was prepared using sodium molybdate and 2, 6-diaminopyridine as the reactive raw materials, followed by continuous salt sealing and calcination of the precursor under an inert atmosphere. The morphology, composition and structure of salt-sealed molybdenum carbide were determined by scanning electron microscopy, transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The results indicate that salt-sealed molybdenum carbide has irregular morphology and includes nanoparticles and nanorods. A comparison of the TEM images of Mo₂C with salt sealing (Mo₂C/SS) and Mo₂C without salt sealing (Mo₂C) indicates that Mo₂C/SS exhibits a smaller particle size. This suggests that salt sealing can efficiently avoid particle aggregation. The Brunauer-Emmett- Teller (BET) specific surface area of the catalysts was obtained from nitrogen adsorption/desorption isotherms. The increase in BET surface area from 2.55 to 8.14 m²·g⁻¹ after salt sealing provides evidence for the formation of pores in the product. The results of XRD, EDS and XPS analyses show that Mo₂C/SS has an orthorhombic crystal structure with molybdenum oxides on the surface, which may originate from surface oxidation. Considering the results of XPS and the turnover frequency (TOF) calculation, we can conclude that the formation of pores via salt sealing contributes to the exposure of more active sites, while simultaneously enlarging the contact area with oxygen. Therefore, higher molybdenum oxide content is generated on the surface, resulting in a lower proportion of active centers (molybdenum carbides) on the catalyst surface. Furthermore, the pseudocapacitance generated by the faradaic reaction of molybdenum oxides is superimposed on the double-layer capacitance of Mo₂C catalysts, which increases the double layer capacitance. Since the effect of pseudo-capacitance on Mo₂C/SS is more significant, the TOF number declines after salt sealing. Compared with Mo₂C, Mo₂C/SS exhibits three features that promote HER mass activity: (1) the generation of large quantities of pores via salt sealing leads to an increase in the BET surface area and exposure of more active sites, which is beneficial for improving HER performance; (2) the porous structure and enlarged surface area pave the way for effective mass and charge transfer; (3) the decrease of the Tafel slope from 145 to 88 mV·dec⁻¹. In summary, salt-sealed Mo₂C exhibited enhanced HER activity with an overpotential of 175 mV to achieve a current density of 10 mA·cm⁻². The Tafel slope for HER on salt-sealed Mo₂C is 88 mV·dec⁻¹. This can be considered as the proof of the Volmer-Heyrovsky mechanism with electrochemical desorption as the rate-determining step.     

Identifying key mononuclear Fe species for low-temperature methane oxidation

The direct functionalization of methane into platform chemicals is arguably one of the holy grails in chemistry. The actual active sites for methane activation are intensively debated. By correlating a wide variety of characterization results with catalytic performance data we have been able to identify mononuclear Fe species as the active site in the Fe/ZSM-5 zeolites for the mild oxidation of methane with H₂O₂ at 50 °C. The 0.1% Fe/ZSM-5 catalyst with dominant mononuclear Fe species possess an excellent turnover rate (TOR) of 66 mol_MeOH mol_Fe⁻¹ h⁻¹, approximately 4 times higher compared to the state-of-the-art dimer-containing Fe/ZSM-5 catalysts. Based on a series of advanced in situ spectroscopic studies and ¹H- and ¹³C- nuclear magnetic resonance (NMR), we found that methane activation initially proceeds on the Fe site of mononuclear Fe species. With the aid of adjacent Brønsted acid sites (BAS), methane can be first oxidized to CH₃OOH and CH₃OH, and then subsequently converted into HOCH₂OOH and consecutively into HCOOH. These findings will facilitate the search towards new metal-zeolite combinations for the activation of C–H bonds in various hydrocarbons, for light alkanes and beyond.

The monomeric Fe species in Fe/ZSM-5 have been identified as the intrinsic active sites for the low-temperature methane oxidation.     

甲烷在Mo/HZSM-5催化剂上的脱氢聚合反应

对不同Mo含量的Mo／HZSM－5催化剂的结构进行了表征，并对这些催化剂的甲烷非氧气氛下的转化反应进行了考察．催化剂的BET比表面积及酸性随Mo含量的增加而降低，当Mo含量大于5％时，Mo对ZSM－5分子筛的晶型有影响，并出现MoO3物相．甲烷在700℃时可高选择性地生成苯和乙烯，最佳Mo含量大约为2％．纯的MoO3或HZSM－5上该反应几乎不进行，因此，可能是分散的钼氧离子和分子筛的酸中心是甲烷转化的活性中心，只有二者的协同作用才能促进甲烷的转化．反应后催化剂中的钼物种被还原了．催化剂上的积炭可能是催化剂失活的主要原因之一，烧炭后催化剂活性基本恢复．     

甲烷在Mo/HZSM-5催化剂上的脱氢聚合反应

对不同Mo含量的Mo／HZSM－5催化剂的结构进行了表征，并对这些催化剂的甲烷非氧气氛下的转化反应进行了考察．催化剂的BET比表面积及酸性随Mo含量的增加而降低，当Mo含量大于5％时，Mo对ZSM－5分子筛的晶型有影响，并出现MoO3物相．甲烷在700℃时可高选择性地生成苯和乙烯，最佳Mo含量大约为2％．纯的MoO3或HZSM－5上该反应几乎不进行，因此，可能是分散的钼氧离子和分子筛的酸中心是甲烷转化的活性中心，只有二者的协同作用才能促进甲烷的转化．反应后催化剂中的钼物种被还原了．催化剂上的积炭可能是催化剂失活的主要原因之一，烧炭后催化剂活性基本恢复．     

Application of Solid-State Molybdenum Sulfide Clusters with an Octahedral Metal Framework to Catalysis: Ring-Opening of Tetrahydrofuran to Butyraldehyde

Solid-state molybdenum sulfide clusters with an octahedral metal framework, the superconducting Chevrel phases, are applied to catalysis. The cluster of copper salt, Cu _x Mo₆S₈ (x = 2.94), stored in air is treated in a hydrogen stream above 300 °C. The activated cluster exhibits catalytic activity for the ring-opening of tetrahydrofuran, yielding butyraldehyde. Cyclic ethers such as trimethylene oxide and tetrahydropyran are also converted to the corresponding aldehydes. The cluster contains nonstoichiometric defects of sulfur atoms. Oxygen atoms are incorporated at the sulfur-deficient sites upon storage in air, but they are removed from the sites by the activation in a hydrogen stream. The resulting coordinatively unsaturated molybdenum atoms are catalytically active for the ring-opening reaction. The molybdenum atom in an intermediate oxidation state around 2+ is moderately coordinated by the oxygen of tetrahydrofuran and favorably releases the produced aldehyde. The neutral cluster Mo₆S₈, which has such sulfur-deficient sites, also catalyzes the reaction.     

Effect of size of catalytically active phases in the dehydrogenation of alcohols and the challenging selective oxidation of hydrocarbons

The size of the active phase is one of the most important factors in determining the catalytic behaviour of a heterogeneous catalyst. This Feature Article focuses on the size effects in two types of reactions, i.e., the metal nanoparticle-catalysed dehydrogenation of alcohols and the metal oxide nanocluster-catalysed selective oxidation of hydrocarbons (including the selective oxidation of methane and ethane and the epoxidation of propylene). For Pd or Au nanoparticle-catalysed oxidative or non-oxidative dehydrogenation of alcohols, the size of metal nanoparticles mainly controls the catalytic activity by affecting the activation of reactants (either alcohol or O(2)). The size of oxidic molybdenum species loaded on SBA-15 determines not only the activity but also the selectivity of oxygenates in the selective oxidation of ethane; highly dispersed molybdenum species are suitable for acetaldehyde formation, while molybdenum oxide nanoparticles exhibit higher formaldehyde selectivity. Cu(II) and Fe(III) isolated on mesoporous silica are highly efficient for the selective oxidation of methane to formaldehyde, while the corresponding oxide clusters mainly catalyse the complete oxidation of methane. The lattice oxygen in iron or copper oxide clusters is responsible for the complete oxidation, while the isolated Cu(I) or Fe(II) generated during the reaction can activate molecular oxygen forming active oxygen species for the selective oxidation of methane. Highly dispersed Cu(I) and Fe(II) species also function for the epoxidation of propylene by O(2) and N(2)O, respectively. Alkali metal ions work as promoters for the epoxidation of propylene by enhancing the dispersion of copper or iron species and weakening the acidity.     

Electrocrystallization of Molybdenum Carbide in Oxide Melts and the Influence of Electrolysis Parameters on Grain Size and Quality of Deposits

The influence of current density and temperature on crystal grain size in electroplating of molybdenum carbide from tungstate-molybdate-carbonate melts was studied. The initial stages of molybdenum carbide electrocrystallization from tungstate-molybdate-carbonate melts at 750-900° on different substrates were studied by the method of galvanostatic switch-on curves and in situ microstructural analysis.     

Selective Coke Combustion by Oxygen Pulsing During Mo/ZSM‐5‐Catalyzed Methane Dehydroaromatization

Non‐oxidative methane dehydroaromatization is a promising reaction to directly convert natural gas into aromatic hydrocarbons and hydrogen. Commercialization of this technology is hampered by rapid catalyst deactivation because of coking. A novel approach is presented involving selective oxidation of coke during methane dehydroaromatization at 700 °C. Periodic pulsing of oxygen into the methane feed results in substantially higher cumulative product yield with synthesis gas; a H₂/CO ratio close to two is the main side‐product of coke combustion. Using ¹³C isotope labeling of methane it is demonstrated that oxygen predominantly reacts with molybdenum carbide species. The resulting molybdenum oxides catalyze coke oxidation. Less than one‐fifth of the available oxygen reacts with gaseous methane. Combined with periodic regeneration at 550 °C, this strategy is a significant step forward, towards a process for converting methane into liquid hydrocarbons.     

Activation of Methane Promoted by Adsorption of CO on Mo2C2− Cluster Anions

Atomic clusters are being actively studied for activation of methane, the most stable alkane molecule. While many cluster cations are very reactive with methane, the cluster anions are usually not very reactive, particularly for noble metal free anions. This study reports that the reactivity of molybdenum carbide cluster anions with methane can be much enhanced by adsorption of CO. The Mo₂C₂^? is inert with CH₄ while the CO addition product Mo₂C₃O^? brings about dehydrogenation of CH₄ under thermal collision conditions. The cluster structures and reactions are characterized by mass spectrometry, photoelectron spectroscopy, and quantum chemistry calculations, which demonstrate that the Mo₂C₃O^? isomer with dissociated CO is reactive but the one with non‐dissociated CO is unreactive. The enhancement of cluster reactivity promoted by CO adsorption in this study is compared with those of reported systems of a few carbonyl complexes.     

Conversion of synthesis gas into alcohols on supported cobalt-molybdenum sulfide catalysts promoted with potassium

The use of transition metal sulfides as catalysts for the synthesis of alcohols can solve the problem of catalyst resistance to sulfur. Catalysts based on molybdenum sulfide of different compositions (promoted with Co and K) were synthesized with the use of various supports (aluminum oxide, aluminum oxide modified with silicon oxide, Sibunit, and titanium silicate) and tested in the reactions of alcohol synthesis and the hydrofining of a mixture of thiophene with n-1-hexene. The dependence of catalyst activity in the synthesis of alcohols on support pore size was demonstrated. It was found that an increase in the potassium content of the active phase of a catalyst increased its activity in the synthesis of alcohols and decreased it in hydrodesulfurization and hydrogenation reactions. Transmission electron microscopy data made it possible to quantitatively evaluate the effect of a potassium additive on the morphology of the active phase; the hypothesis that potassium was intercalated between the layers of molybdenum sulfide was proposed.