用于费托合成的骨架Co@HZSM-5核壳催化剂

以骨架Co 为内核, 通过水热合成在其表面包覆HZSM-5 分子筛膜, 制备了具有核壳结构的骨架Co@HZSM-5 催化剂. 采用元素分析、氮物理吸附、粉末X射线衍射、扫描电子显微镜、氨脱附等手段对催化剂的物理化学性质进行了表征. 在气相费托合成反应中, 骨架Co@HZSM-5 核壳催化剂显示了比物理混合的骨架Co-HZSM-5催化剂更好的催化裂解作用, 故C₅-C₁₁汽油段产物选择性高. 通过改变水热时间, 对分子筛膜厚进行了调节, 发现适当的分子筛膜厚在保证催化剂具有较高活性的前提下, 使长链费托合成产物完全裂解, 高选择性地得到汽油段产物. 提高反应温度有利于费托合成反应的进行以及分子筛上裂解效率的提高, 但产物分布向短链烃方向移动. 在水热4天制备的骨架Co@HZSM-5核壳催化剂上及反应温度为250 ℃时, 得到了最佳反应结果, 汽油段产物选择性达79%, 说明费托合成活性中心与催化裂解酸中心之间形成了良好的协同作用.     

合成气一步法制备二甲醚核壳结构催化剂的制备及其反应性能

以生物质(葡萄糖、蔗糖、淀粉)为模板剂,通过水热合成法制备具有核壳结构的CuO-ZnO-Al₂O₃@Al₂O₃复合催化剂,该催化剂以甲醇合成催化剂CuO-ZnO-Al₂O₃为核,甲醇脱水催化剂Al₂O₃为壳.SEM-EDS对催化剂核壳结构的表征发现,通过改变水热合成温度和合成时间可以调变催化剂中Al₂O₃壳层的厚度.将该复合催化剂用于合成气直接制备二甲醚的反应,在空速1 500 mL/(h·g_cat)、温度260 ℃、压力5.0 MPa的条件下,CO转化率和二甲醚选择性分别达到35.2%和61.1%.     

镁改性HZSM-5对Cu-ZnO-Al2O3/HZSM-5催化合成气直接制二甲醚反应的影响

 采用浸渍法制备了一系列MgO改性的HZSM-5分子筛,并以MgO/HZSM-5为甲醇脱水催化剂与Cu-ZnO-Al2O3甲醇合成催化剂组成双功能催化剂,在连续流动加压固定床反应器上考察了其对合成气直接制二甲醚反应的催化性能. 结果表明,以适量MgO改性的HZSM-5分子筛组成的双功能催化剂上,二甲醚选择性可高达64.8%,CO2和烃类副产物的选择性分别为30.2%和0.4%; 由未改性的HZSM-5分子筛组成的双功能催化剂上,二甲醚选择性仅为49.1%,CO2和烃类副产物的选择性则分别高达37.1%和9.3%. 当MgO含量过高时,则CO转化率和二甲醚选择性均降低. 根据实验结果,提出了甲醇在MgO/HZSM-5上脱水的反应机理.     

核壳结构催化剂Cr-Zn@SiO2@SAPO-34催化合成气直接转化制低碳烃的性能

合成气直接转化高选择性制烃类产物仍是巨大的挑战.本文合成了以Cr-Zn氧化物为核, SiO2为中间过渡层,再通过原位水热合成覆盖一层SAPO-34分子筛为壳的核壳结构催化剂.合成气转化反应结果显示,与纯Cr-Zn金属氧化物相比,核壳结构催化剂将产物分布由甲醇和甲烷移动至C2–C4烃(所有烃类产物中占66.9%).这表明核壳结构催化剂用于合成气一步法直接转化制液化石油气的反应具有可行性,但是催化剂结构和组成有待于进一步优化,以提高其催化反应性能.     

[CuO-ZnO-Al2O3]/[HZSM-5]核壳双功能催化剂的制备、结构及其CO2+H2直接合成二甲醚反应性能

利用水热合成法制备了一系列不同晶化时间的核壳结构双功能催化剂[CuO-ZnO-Al₂O₃]/[HZSM-5],通过X射线衍射(XRD)、扫描电镜(SEM)和能量分散谱(EDS)对催化剂结构进行了表征,并考察了核壳催化剂CO₂加氢直接合成二甲醚的反应性能。结果表明,通过水热合成法可在甲醇合成催化剂CuO-ZnO-Al₂O₃表面包覆一层完整的HZSM-5分子筛膜,形成核壳结构,并且调节晶化时间可以控制分子筛晶粒尺寸及膜厚。与物理混合法制备的传统双功能催化剂相比,核壳结构催化剂合成二甲醚的选择性显著提高,其中晶化时间为3d的催化剂反应性能最为理想,CO₂转化率为38.9%,二甲醚选择性达到77.0%。     

核壳结构催化剂Cr-Zn@SiO_2@SAPO-34催化合成气直接转化制低碳烃的性能（英文）

合成气直接转化高选择性制烃类产物仍是巨大的挑战.本文合成了以Cr-Zn氧化物为核,Si O2为中间过渡层,再通过原位水热合成覆盖一层SAPO-34分子筛为壳的核壳结构催化剂.合成气转化反应结果显示,与纯Cr-Zn金属氧化物相比,核壳结构催化剂将产物分布由甲醇和甲烷移动至C2–C4烃(所有烃类产物中占66.9%).这表明核壳结构催化剂用于合成气一步法直接转化制液化石油气的反应具有可行性,但是催化剂结构和组成有待于进一步优化,以提高其催化反应性能.     

孪晶HZSM-5@Silicalite-1核壳结构催化剂的制备及甲苯甲醇烷基化性能研究

本研究采用水热结晶法合成了孪晶HZSM-5分子筛，并在表面外延生长Silicalite-1（S-1）纯硅沸石，制备了HZSM-5@Silicalite-1核壳结构催化剂。与孪晶HZSM-5相比，HZSM-5@Silicalite-1核壳结构催化剂在甲苯甲醇烷基化反应中表现出优异的催化性能。在470℃、0.1 MPa和临氢反应条件下，HZSM-5@40Silicalite-1催化剂的甲苯单程转化率为8.5%，对二甲苯选择性为98.4%。进一步研究了核相HZSM-5与S-1壳层前驱体固液质量比对表面S-1晶体生长的影响，同时考察了S-1壳层对孪晶HZSM-5催化性能的影响。通过SEM、XRD、XRF、液体静态吸附、N₂吸附-脱附、NH₃-TPD、Py-FTIR等表征实验对核壳材料的结构和酸性质进行了详细研究。     

HZSM-5/SAPO-11负载Cr_2O_3催化转化LPG制低碳烯烃活性研究

SAPO-11晶化液中预置HZSM-5合成了HZSM-5(核)/SAPO-11(壳)复合分子筛。以复合分子筛为载体负载10%Cr_2O_3,研究了其孔分布、酸性质及其对液化石油气(LPG)转化制乙烯和丙烯反应的催化性能。结果表明,复合分子筛由HZSM-5表面包覆不同厚度的SAPO-11微晶组成,随着晶化时间延长,复合分子筛壳层厚度增加。复合分子筛负载Cr_2O_3催化剂的介孔率先增加后降低;弱酸量先增加后降低,强酸强度增加,强酸量先降低后增加,强酸密度减小。复合分子筛载体在LPG选择转化反应中催化性能优于单个分子筛和机械混合分子筛,其中,晶化12 h合成样品负载Cr_2O_3用于LPG转化反应对原料总转化率和乙烯+丙烯选择性最高,分别为42.63%和65.89%,CH_4和C_(5+)选择性分别为6.32%和15.48%。通过控制晶化时间可调变壳层厚度、复合分子筛介孔率以及酸性质,改善产物分布。     

无溶剂路线制备分子筛封装的钴基催化剂及其在费托合成制汽油反应中的应用（英文）

自2012年浙江大学肖丰收教授(J.Am.Chem.Soc.,2012,134,15173-15176)首次提出无溶剂法合成分子筛以来,该路线已备受关注.无溶剂合成分子筛方法具有废液少、产率高、安全系数高等优点.本文针对合成气经费托路线(FTS)一步法制备富含异构烷烃汽油馏分的研究,通过无溶剂研磨法制备了分子筛封装金属催化剂.一般来说,烷烃异构化催化剂的性能主要取决于分子筛的孔道结构及其酸性,其次是分子筛晶粒大小、结晶度和表面性质等因素.本文对比了三种具有相同拓扑结构的MFI分子筛(Silicalite-1,HZSM-5和NaZSM-5)对汽油和异构烷烃选择性的影响规律.结果显示,在CO转化率(~30%)近似相同的情况下,具有最弱酸性的Silicalite-1封装的Co颗粒表现出最高的汽油选择性(~70%)和异构烷烃选择性(~30.7%).这意味着正构烷烃异构化反应只需要弱酸即可实现,较强的酸性则会使其发生过度裂解反应.Py-IR谱图显示,Silicalite-1在1445 cm-1附近的L酸是区别于NaZSM-5和HZSM-5的一个重要酸性位,可作为FTS路线制备富含异构烷烃汽油的一个关键参数.另外,与封装型(Co@MFI)催化剂相比,浸渍型催化剂(Co/MFI)的汽油选择性明显偏低,可能与金属活性位与分子筛酸性位之间的距离有直接关系.因此,无溶剂合成分子筛是一条具有前景和适宜放大的催化剂合成路线.对于合成气经费托路线制取富含异构烷烃汽油反应,正构烷烃在分子筛催化剂上的裂解和异构化之间的竞争反应是核心问题.未来有待突破的研究方向包括:(1)多支链异构烷烃的合成,目前对于有效调控多支链烷烃的生成关注较少;(2)反应路线的设计,合成气经甲醇路线,联合甲醇制汽油(MTG)反应获得异构烷烃;(3)裂解反应的抑制;(4)分子筛孔道/笼对异构烷烃选择性的调控机制.     

磷改性HZSM-5分子筛的制备及其在合成气一步法制二甲醚反应中的应用

 以磷酸为前驱体,采用浸渍法制备了一系列不同P2O5含量(分别为5%, 10%和15%)的磷改性HZSM-5分子筛(P2O5/HZSM-5), 并采用氨程序升温脱附和吡啶吸附红外光谱法研究了其酸性. 结果表明,随着P2O5含量的增大, P2O5/HZSM-5样品的酸量尤其是强Brnsted酸位的酸量逐渐减少. 以上述P2O5/HZSM-5分子筛为甲醇脱水催化剂与工业甲醇合成催化剂(Cu-ZnO-Al2O3)组成双功能催化剂,在连续流动加压固定床反应器上考察了其对合成气一步法制二甲醚反应的催化性能. 结果表明,以适量磷(10%P2O5)改性的HZSM-5分子筛作为甲醇脱水催化剂,可使产物中二氧化碳和烃类副产物的选择性分别由改性前的43.3%和3.0%下降至低于33%和0.1%, 从而使二甲醚的选择性由49.7%提高到63%以上. 当P2O5/HZSM-5中的磷含量(15%P2O5)过高时,产物中甲醇的选择性高达30%以上,表明反应所生成的中间产物甲醇无法有效地转化,从而使二甲醚的选择性和一氧化碳的转化率均大大降低.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.