Tm3+/Er3+/Ho3+共掺SiO2-Bi2O3-AlF3-BaF2玻璃发光性能

采用高温熔融法制备了Tm³⁺/Er³⁺/Ho³⁺共掺的铋硅酸盐50SiO₂-40Bi₂O₃-5AlF₃-5BaF₂玻璃。研究了在808 nm激光器（Laser Diode）激发下Tm³⁺/Er³⁺/Ho³⁺共掺的铋硅酸盐在2 060 nm处的发光性能,同时测试及分析了该铋硅酸盐玻璃的差热特性、吸收光谱及荧光光谱。根据吸收光谱以及Judd-Oflet理论,计算了Ho³⁺的Judd-Oflet强度参数Ω_t（t=2,4,6）以及Tm³⁺/Er³⁺/Ho³⁺相应的吸收截面。铋硅酸盐玻璃中,Tm₂O₃、Er₂O₃和Ho2O3掺杂浓度分别为0.75%、1.0%和0.5%时,2 060 nm处Ho³⁺∶⁵I₇→⁵I₈发射峰强度达到最大。对Tm³⁺/Er³⁺/Ho³⁺ 3种离子的光谱性质和离子间可能存在的能量传递也做了分析。Ho³⁺在1 953 nm处的最大吸收截面σ_abs为9.08×10^-21 cm²,在2 060 nm处的最大发射截面σem为11.68×10^-21 cm²,辐射寿命τ_mea为2.75 ms,具有良好的增益效应σ_emτ（3.212×10^-20 cm^-2·ms）。     

[Me3NC2H4OH]Zn2Cl5水溶液的激光光解研究

利用时间分辨激光光解技术研究了季铵盐型离子液体[Me₃NC₂H₄OH]Zn₂Cl₅(简写R-Zn₂Cl₅)的光解行为, 研究发现离子液体能被266 nm激光单光子电离, 生成阳离子自由基、[Zn₂Cl₅]^•中性自由基和水合电子, 观察到胆碱激发三线态的存在, 并测定了离子液体光电离的量子产额为0.04. 利用266 nm激光对离子液体、胆碱、氯化锌、氯化钠的光解行为比较, 发现胆碱阳离子的贡献很小, [Zn₂Cl₅]^－阴离子起主要作用. 采用氧化性自由基SO₄^•－引发离子自由基, 揭示其光电离机理, 测定离子液体的动力学反应速率常数, SO₄^•－ 460 nm的衰减速率常数为1.3×10⁹ L•mol^－1•s^－1, 320 nm离子自由基瞬态产物的生成速率常数为1.5×10⁹ L•mol^－1•s^－1, 两者很接近, 说明SO₄^•－自由基的衰减与瞬态自由基的生成是同步的.     

水热合成LuF3:Yb3+,Er3+微晶及其上转换发射与温度传感特性

通过在不同pH值下的简易水热法合成不同Yb³⁺离子（n_YB³⁺/n_Lu³⁺=5%~15%）和Er³⁺离子（n_Er³⁺/n_Lu³⁺=1%~5%）掺杂浓度的LuF₃∶Yb³⁺,Er³⁺微晶荧光粉。发现pH值对正交相LuF₃∶Yb³⁺,Er³⁺的合成起着关键作用。在980 nm激发下,LuF₃∶Yb³⁺,Er³⁺荧光体呈现出以523 nm（²H_11/2→⁴I_15/2）和539 nm（⁴S_3/2→⁴I_15/2）为中心的强绿光上转换（UC）发射以及以660 nm（⁴F_9/2→⁴I_15/2）为中心弱红光上转换发射。通过使用X射线衍射（XRD）和光致发光（PL）分析测定了最强发射强度的Er³⁺和Yb³⁺的最佳掺杂浓度。浓度依赖性研究表明,达到最强的绿光上转换发光时最佳掺杂浓度为10% Yb³⁺,2% Er³⁺。通过改变泵浦功率来研究LuF₃∶Yb³⁺,Er³⁺荧光粉UC发光机制。通过980 nm二极管激光器在293~573 K的范围内研究了在523和539 nm处的2个绿光UC发射带的荧光强度比（FIR）的温度依赖性,发现在490 K得到最大灵敏度约为15.3×10^-4 K^-1。这表明LuF₃∶Yb³⁺,Er³⁺荧光体可应用于具有高灵敏度的光学温度传感器。     

H2O2-鲁米诺-荧光素钠-K2CO3高灵敏化学发光法测定二氧化碳

在碱性介质中, CO₃^2－对H₂O₂氧化鲁米诺化学发光反应具有重要作用, 荧光素钠对该反应具有很强的增敏作用. 据此, 建立了化学发光法测定二氧化碳的新方法. 方法的线性范围为1.0×10^－10～5.0×10^－6 mol•L^－1 CO₃^2－, 检出限为 1.2×10^－11 mol•L^－1 CO₃^2－ (相当于5.3×10^－10 g•L^－1 CO₂). 该方法用于室内外空气中二氧化碳含量的测定, 相对标准偏差1.8%～2.1% (n＝11), 加标实验回收率97.6%～101.4%. 论文还探讨了反应的发光机理, 发光反应很可能是由溶液中的CO₃^2－与H₂O₂作用而产生的活性自由基引发, 荧光素钠对发光的增敏作用为化学能量转移过程.     

Cr2O3和CrO3/Cr2O3催化剂的2-氯-1，1，1-三氟乙烷气相氟化反应的活性物种和失活

采用沉淀法和浸渍法制备了2种铬基（Cr₂O₃和CrO₃/Cr₂O₃）催化剂,用于气相氟化2-氯-1,1,1-三氟乙烷合成1,1,1,2-四氟乙烷。研究发现含有低价铬（Cr³⁺）物种的Cr₂O₃催化剂上2-氯-1,1,1-三氟乙烷的稳态转化率为18.5%,而含有高价铬（Cr⁶⁺）物种和低价铬（Cr³⁺）物种的CrO₃/Cr₂O₃催化剂初始转化率达到30.6%,然而存在明显的失活。含有Cr⁶⁺物种的CrO₃/Cr₂O₃催化剂的2-氯-1,1,1-三氟乙烷氟化反应初始TOF值为1.71×10^-4 mol_HCFC-133a·mol_Cr(Ⅵ)^-1·s^-1,高于含有Cr³⁺物种的Cr₂O₃催化剂（4.16×10^-5 mol_HCFC-133a·mol_Cr(Ⅲ)^-1·s^-1）。Cr₂O₃催化剂在氟化反应前后催化剂的物相结构保持不变;而含有高价铬物种的CrO₃/Cr₂O₃催化剂经HF反应后生成了CrO_xF_y活性物种。然而,CrO_xF_y物种在反应中挥发或转化成稳定但无活性的CrF₃,从而导致催化剂失活。     

两种3D微孔Zn-MOF对水溶液中Fe3+、Cr2O72-和丙酮分子的荧光传感

通过溶剂热法合成了2种三维微孔锌金属有机框架材料,其分子式为[Zn₃(DBA)(OH)(1,10-phen)₂]_n(1)和{[Zn₂(HDBA)(4,4''-bipy)_1.5]·H₂O}_n(2)(H₅DBA=3,5-二(2'',4''-对羧基苯基)苯甲酸;1,10-phen=1,10-菲咯啉;4,4''-bipy=4,4''-联吡啶)。结构分析表明,配合物1为三核锌基金属单元的三维微孔骨架,配合物2为双核锌基的微孔结构。与2相比,配合物1在水中具有较强的发光性能,可作为检测Fe³⁺、Cr₂O₇^2-和丙酮分子的发光传感器,具有较高的选择性和灵敏度。     

α-Ti(HPO4)2微球负载型催化剂的合成及其烯烃聚合催化性能

2种茂金属催化剂及1种后过渡金属催化剂分别被固载于经过甲基铝氧烷处理后的α-Ti（HPO₄）₂微球表面,制备得到3种微球负载型催化剂。在烯烃聚合反应过程中,3种负载型催化剂均表现出比硅胶负载型催化剂更高的催化活性。2种茂金属负载型催化剂在乙烯、丙烯聚合反应中的活性分别高达6.8×10⁷ g_PE·（mol_Zr·h）^-1和5.0×10⁷ g_PP·（mol_Zr·h）^-1,所产生的烯烃聚合产物分子量分布较窄（M_w/M_n<2.3）,表现出良好的单中心催化特性,而且丙烯聚合产物的等规度高达96.5%。负载型后过渡金属催化剂在乙烯聚合反应中的活性稍低,但也能够达到8.3×10⁶ g_PE·（mol_Fe·h）^-1。3种负载型催化剂催化烯烃聚合产物均成微球型,能够很好地复制载体的形貌。     

α-Ti(HPO4)2微球负载型催化剂的合成及其烯烃聚合催化性能

2种茂金属催化剂及1种后过渡金属催化剂分别被固载于经过甲基铝氧烷处理后的α-Ti（HPO₄）₂微球表面,制备得到3种微球负载型催化剂。在烯烃聚合反应过程中,3种负载型催化剂均表现出比硅胶负载型催化剂更高的催化活性。2种茂金属负载型催化剂在乙烯、丙烯聚合反应中的活性分别高达6.8×10⁷ g_PE·（mol_Zr·h）^-1和5.0×10⁷ g_PP·（mol_Zr·h）^-1,所产生的烯烃聚合产物分子量分布较窄（M_w/M_n<2.3）,表现出良好的单中心催化特性,而且丙烯聚合产物的等规度高达96.5%。负载型后过渡金属催化剂在乙烯聚合反应中的活性稍低,但也能够达到8.3×10⁶ g_PE·（mol_Fe·h）^-1。3种负载型催化剂催化烯烃聚合产物均成微球型,能够很好地复制载体的形貌。     

GdPO4:Sm3+荧光粉的焙烧温度和掺杂浓度的优化及发光和磁性能

以GdPO₄为基质,Sm³⁺为激活剂,采用水热法合成了纳米荧光粉前驱体,分别在800、900、1 000、1 100和1 200℃下焙烧,得到一系列GdPO₄:Sm³⁺荧光粉。首先探究了GdPO₄:Sm³⁺的最佳焙烧温度;其次研究了Sm³⁺掺杂浓度对GdPO₄:Sm³⁺荧光性能的影响;最后研究了GdPO₄:2% Sm³⁺的高温荧光性能和磁性能。使用X射线衍射仪(XRD)、扫描电子显微镜(SEM)、磁强计和荧光分光光度计(FL)对荧光粉的晶体结构、形貌、发光和磁性能进行了表征。结果表明:荧光粉的晶体结构由前驱体六方晶系GdPO₄·H₂O:Sm³⁺变为单斜晶系的GdPO₄:Sm³⁺,形貌由纳米棒变为无规则块体。当焙烧温度为1 000℃,Sm³⁺掺杂浓度为2%时,荧光粉的发光强度和荧光寿命达到最大值。GdPO₄:2% Sm³⁺中Sm³⁺之间能量传递类型为电偶极-电偶极相互作用,能量传递的临界距离为1.646~1.884 nm。最佳样品GdPO₄:2% Sm³⁺有优异的热稳定性,热猝灭活化能为-0.157 eV,且具有良好的顺磁性,质量磁化率为1.22×10^-4 emu·g^-1·Oe^-1。     

Cr2O3和CrO3/Cr2O3催化剂的2-氯-1,1,1-三氟乙烷气相氟化反应的活性物种和失活

采用沉淀法和浸渍法制备了2种铬基（Cr₂O₃和CrO₃/Cr₂O₃）催化剂,用于气相氟化2-氯-1,1,1-三氟乙烷合成1,1,1,2-四氟乙烷。研究发现含有低价铬（Cr³⁺）物种的Cr₂O₃催化剂上2-氯-1,1,1-三氟乙烷的稳态转化率为18.5%,而含有高价铬（Cr⁶⁺）物种和低价铬（Cr³⁺）物种的CrO₃/Cr₂O₃催化剂初始转化率达到30.6%,然而存在明显的失活。含有Cr⁶⁺物种的CrO₃/Cr₂O₃催化剂的2-氯-1,1,1-三氟乙烷氟化反应初始TOF值为1.71×10^-4 mol_HCFC-133a·mol_Cr（Ⅵ）^-1·s^-1,高于含有Cr³⁺物种的Cr₂O₃催化剂（4.16×10^-5 mol_HCFC-133a·mol_Cr（Ⅲ）^-1·s^-1）。Cr₂O₃催化剂在氟化反应前后催化剂的物相结构保持不变;而含有高价铬物种的CrO₃/Cr₂O₃催化剂经HF反应后生成了CrO_xF_y活性物种。然而,CrO_xF_y物种在反应中挥发或转化成稳定但无活性的CrF₃,从而导致催化剂失活。     

Phase relations in the K2W2O7-K2WO4-KPO3-Bi2O3 system and structure of K6.5Bi2.5W4P6O34

The phase relations in the cross-section of the K₂W₂O₇-K₂WO₄-KPO₃ containing 15 mol% Bi₂O₃ were undertaken using flux method. Crystallization fields of K_6.5Bi_2.5W₄P₆O₃₄, K₂Bi(PO₄)(WO₄), Bi₂WO₆, KBi(WO₄)₂ and their cocrystallization areas were identified. Novel phase K_6.5Bi_2.5W₄P₆O₃₄ was characterized by single-crystal X-ray diffraction: sp. gr. P−1, a=9.4170(5), b=9.7166(4), c=17.6050(7) Å, α=90.052(5)°, β=103.880(5)° and γ=90.125(5)°. It has a layered structure, which contains {K₇Bi₅W₈P₁₂O₆₈}_∞ layers stacked parallel to ab plane and sheets composed by potassium atoms separating these layers. Sandwich-like {K₇Bi₅W₈P₁₂O₆₈}_∞ layers are assembled from [W₂P₂O₁₃]_∞ and [BiPO₄]_∞ building units, and are penetrated by tunnels with K/Bi atoms inside. FTIR-spectra of K₂Bi(PO₄)(WO₄) and K_6.5Bi_2.5W₄P₆O₃₄ were discussed on the basis of factor group theory.     

Sol-gel synthesis of K3InF6 and structural characterization of K2InC10O10H6F9, K3InC12O14H4F18 and K3InC12O12F18

K₃InF₆ is synthesized by a sol-gel route starting from indium and potassium acetates dissolved in isopropanol in the stoichiometry 1:3, with trifluoroacetic acid as fluorinating agent. The crystal structures of the organic precursors were solved by X-ray diffraction methods on single crystals. Three organic compounds were isolated and identified: K₂InC₁₀O₁₀H₆F₉, K₃InC₁₂O₁₄H₄F₁₈ and K₃InC₁₂O₁₂F₁₈. The first one, deficient in potassium in comparison with the initial stoichiometry, is unstable. In its crystal structure, acetate as well as trifluoroacetate anions are coordinated to the indium atom. The two other precursors are obtained, respectively, by quick and slow evaporation of the solution. They correspond to the final organic compounds, which give K₃InF₆ by decomposition at high temperature. The crystal structure of K₃InC₁₂O₁₄H₄F₁₈ is characterized by complex anions [In(CF₃COO)₄(OH_x)₂]^(5−2x)− and isolated [CF₃COOH_2−x]^(x−1)− molecules with x=2 or 1, surrounded by K⁺ cations. The crystal structure of K₃InC₁₂O₁₂F₁₈ is only constituted by complex anions [In(CF₃COO)₆]³⁻ and K⁺ cations. For all these compounds, potassium cations ensure only the electroneutrality of the structure. IR spectra of K₂InC₁₀O₁₀H₆F₉ and K₃InC₁₂O₁₂F₁₈ were also performed at room temperature on pulverized crystals.     

KCl-KBO2-K2CO3, K2MoO4-KBO2-K2CO3, and K2WO4-KBO2-K2CO3 ternary systems

phase diagrams of KCl-KBO₂-K₂CO₃, K₂MoO₄-KBO₂-K₂CO₃, and K₂WO₄-KBO₂-K₂CO₃ ternary systems were studied by a calculation-experimental method and differential thermal analysis (DTA). The coordinates of ternary eutectics were determined to be E ₁: 622°C, 8.5 mol % KBO₂, 56.5 mol % KCl, and 35 mol % K₂CO₃; E ₂: 710°C, 23 mol % KBO₂, 43 mol % K₂CO₃, and 34 mol % K₂MoO₄; E ₃: 710°C, 23 mol % KBO₂, 43 mol % K₂CO₃, and 34 mol % K₂WO₄. The specific heats of melting of the eutectics were determined.     

Li2SO4-Na2SO4-H2O和Li2SO4- K2SO4-H2O溶液的体积性质

本文用高精度数字式振荡管密度计测定了288K至318K温度范围内Li₂SO₄ + Na₂SO₄ + H₂O和 Li₂SO₄ + K₂SO₄ + H₂O三元体系的密度。混合溶液的离子强度范围从0.1到4.5 mol.kg_–1,混合溶液中Na₂SO₄和K₂SO₄的离子强度分数为0.2,0.4,0.6和0.8。用密度实验值拟合得到了不同温度下Pitzer离子相互作用模型混合参数θ_V和 ψ_V,模型的计算值与实验值的偏差在±0.002 g.cm_–3以内。用Pitzer模型计算了不同离子强度下三元体系的混合体积。     

Solubility in the Na2Cr2O7-(NH4)2Cr2O7-K2Cr2O7-H2O system

Solubility in the Na₂Cr₂O₇-(NH₄)₂Cr₂O₇-K₂Cr₂O₇-H₂O four-component water-salt system at 25, 50, and 75°C was studied for the first time. Phase field boundaries for individual salts and potassium and ammonium dichromate solid solutions, monovariant lines, and invariant points were determined. Experimental data were used to optimize the looped isohydric process of potassium dichromate preparation involving additional salts.     

NaBO2-NaCl-Na2CO3, NaBO2- Na2CO3-NaMoO4, NaBO2- Na2CO3-NaWO4, and NaBO2-NaCl-Na2WO4 ternary systems

The phase diagrams of the NaBO₂-NaCl-Na₂CO₃, NaBO₂-Na₂CO₃-Na₂MoO₄, NaBO₂- Na₂CO₃-Na₂WO₄, and NaBO₂-NaCl-Na₂WO₄ ternary systems were studied by a calculation-experimental method and differential thermal analysis. The coordinates of ternary eutectics were determined: E ₁: 612°C, 16 mol % NaBO₂, 42 mol % NaCl, and 42 mol % Na₂CO₃; E ₂: 568°C, 12 mol % NaBO₂, 28 mol % Na₂CO₃, and 60 mol % Na₂MoO₄; E ₃: 575°C, 12 mol % NaBO₂, 32 mol % Na₂CO₃, and 56 mol % Na₂WO₄; E ₄: 628°C, 8 mol % NaBO₂, 20 mol % NaCl, and 72 mol % Na₂WO₄; and E ₅: 655°C, 9 mol % NaBO₂, 53 mol % NaCl, and 38 mol % Na₂WO₄.     

Extension of the La7Mo7O30 structural type with La7Nb3W4O30 and La7Ta3W4O30 compounds

Two compounds of formula La₇A₃W₄O₃₀ (with A=Nb and Ta) were prepared by solid-state reaction at 1450 and 1490 °C. They crystallize in the rhombohedric space group R-3 (No. 148), with the hexagonal parameters: , and , . The structure of the materials was analyzed from X-ray, neutron and electronic diffraction. These oxides are isostructural of the reduced molybdenum compound La₇Mo₇O₃₀, which are formed of perovskite rod along [111]. An order between (Nb, Ta) and W is observed.     

Theoretical study of polyoxide clusters B20O30, Al20O30, V20O50, Si20O30H20, and Si20O30F20

The structural, electronic, and vibrational characteristics and energies of the isolated polyoxide clusters B₂₀O₃₀, Al₂₀O₃₀, V₂₀O₅₀, Si₂₀O₃₀H₂₀, and Si₂₀O₃₀F₂₀ and their complexes with the H⁻ ion and ammonia complexes Al₂₀O₃₀ · nNH₃ have been calculated by the density functional theory B3LYP method with different basis sets. The computation results show that the symmetric closo structure I _h with oxygen bridges located above the centers of the faces of an empty [M₂₀] dodecahedron is more favorable for V₂₀O₅₀, Si₂₀O₃₀H₂₀, and Si₂₀O₃₀F₂₀. For B₂₀O₃₀, the cage closo isomer is also more favorable than the other isomers, but its structure is severely distorted as compared to a dodecahedron and has a symmetry close to C ₃ . For Al₂₀O₃₀, the I _h structure corresponds to a high-lying local minimum of the potential energy surface. For Al₂₀O₃₀, a set of unusual puckshaped isomers of symmetry C _i , with different numbers of four-coordinate atoms ^IVAl and three-coordinate atoms ^IIIO, was localized; these structures are more than 90 kcal/mol more favorable than the dodecahedron I _h . The most favorable isomer of Al₂₀O₃₀ contains twelve four-coordinate atoms ^IVAl and four five-coordinate atoms ^VAl. The energies of dissociation of the most favorable M₂₀O₃₀ clusters into the M₂O₃ (C _2v ) and M₄O₆ (T _d ) fragments and, in the case of Al₂₀O₃₀, also into the Al₈O₁₂ (O _h ) and Al₁₂O₁₈ (D _3d ) fragments, have been estimated. The conclusion has been drawn that these clusters can, in principle, exist and can be experimentally detected in the isolated state. Analogous calculations have been performed for ammonia complexes Al₂₀O₃₀ · nNH₃ with n varying from 1 to 20. The effect of solvation on the relative stability of the dodecahedral and puckshaped isomers of the Al₂₀O₃₀ cluster is observed. The isomers with ammonia molecules in their first coordination sphere become much closer to one another on the energy scale; however, the dodecahedron remains a considerably less favorable intermediate. Original Russian Text ? O.P. Charkin, N.M. Klimenko, D.O. Charkin, 2008, published in Zhurnal Neorganicheskoi Khimii, 2008, Vol. 53, No. 4, pp. 624–635.     

Preparation and structure of NaSr0.5Al2B2O7 and NaCa0.5Al2B2O7

Two compounds NaSr_0.5Al₂B₂O₇ and NaCa_0.5Al₂B₂O₇, have been found to crystallize into a new structure type by Rietveld refinement from X-ray powder diffraction data. Their structure belongs to hexagonal space group P6₃/m, with lattice parameters of , for NaSr_0.5Al₂B₂O₇ and , for NaCa_0.5Al₂B₂O₇, respectively. The structure is built up by [Al₂B₂O₇]²⁻ double layer and Na⁺/Ca²⁺ or Na⁺/Sr²⁺ ions alternatively stacking along the c-axis. The sites in the inter-double layer are fully occupied jointly by Na and Ca or Sr, but the intra-double layer sites are only half occupied solely by Na. A mechanism of the transition of the structure from CaAl₂B₂O₇ to present structure type by replacing only 1% Ca by Na (2%) as observed by Chang and Keszler (Mater. Res. Bull. 33 (1998) 299) is also proposed.     

Li2O-TiO2-SiO2-P2O5和Li2O-TiO2-Al2O3-P2O5体系锂离子固体电解质的制备及性能研究

一些具有NASICON型网格结构的固体电解质具有高的电导率和好的稳定性,NASICON的意思是Na Super Ionic Conductor[1]。当NaZr2(PO4)3中P5 被Si4 部分取代时便可以得到具有NASICON结构的Na1 xZr2SixP3-xO12体系,其具有高的钠离子电导率。然而有相同结构的Li1 xZr2SixP3-xO12体系的离子电导率却很低,这是因为Li 半径太小,而NASICON三维网格结构的离子通道太大,两者不匹配而使电导率下降[2]。但当LiZr2(PO4)3中Zr4 被离子半径小些的Ti4 取代,所得LiTi2(PO4)3的通道就与Li 半径相匹配,适合于锂离子的迁移,从而使其电导率…