二氢吲哚类染料用于染料敏化太阳能电池光敏剂的比较

采用密度泛函理论(DFT)和含时密度泛函理论(TD-DFT)对四种二氢吲哚染料进行研究, 从中筛选出相对优秀的染料敏化太阳能电池光敏剂. 对前线分子轨道的计算表明, 二氢吲哚染料的前线分子轨道结构非常有利于染料激发态向TiO2电极的电子注入. 对真空中的紫外和可见光吸收光谱的计算表明, 二氢吲哚染料的吸收光谱与太阳辐射光谱匹配较好. 对染料分子的能级计算表明, 二氢吲哚染料的能级结构比较适合于I-/I-3作电解液的TiO2纳米晶太阳能电池的光敏剂. 二氢吲哚染料最低未占据分子轨道(LUMO) 能级均比TiO2晶体导带边能级高, 能够保证激发态染料分子高效地向TiO2电极转移电子. 二氢吲哚染料最高占据分子轨道(HOMO)的能级比I-/I-3能级低, 保证了失去电子的染料分子能够顺利地从电解液中得到电子. 与实验数据比较, 得出在提高染料敏化太阳能电池转换效率方面, 对染料的关键要求是LUMO能级的位置. 染料分子的稳定性是染料敏化太阳能电池使用寿命的关键因素. 通过对化学键键长的比较表明, 二氢吲哚染料的分子稳定性基本相同. 对计算结果的分析表明, 二氢吲哚染料1(ID1)的LUMO能级最高, 分子稳定性最好, 在酒精溶液中的吸收光谱与太阳辐射光谱匹配很好, 在同类染料中是较好的染料敏化太阳能电池光敏剂.     

用于染料敏化太阳能电池的D5同类物分子设计(英文)

使用密度泛函理论(DFT)和含时密度泛函理论(TDDFT)以及自然键轨道(NBO)分析,设计比有机染料D5更优秀的用于染料敏化太阳能电池(DSSC)的D5同类物分子.在D5骨架的给电子基团上对称地引入给电子基(—OH,—NH2,—OCH3),既可以使分子的最低未占据分子轨道(LUMO)能级提高,又可以使吸收光谱红移,从而既提高染料分子捕获太阳辐射光子的能力,又提高由染料分子的激发态向TiO2电极注入电子的驱动力.在D5分子的骨架上,对称地引入受电子基(—CF3,—F,—CN),可以使染料分子的吸收光谱强烈地红移,从而更有效地利用太阳能.由LUMO能级的提高和吸收光谱的红移来考虑,所设计的D516,D536,D537分子是比D5优秀的同类物分子,其中D516是最好的.单从吸收光谱红移来考虑,所设计的D565,D567,D568分子是比D5优秀的同类物分子,其中D565的吸收光谱有望与太阳辐射光谱更好地匹配.挑选出来的这6种D5同类物分子都是D-π-A(电子给体-共轭π桥-电子受体)结构.这几种分子的光激发引起的最高占据分子轨道(HOMOs)到LUMOs的跃迁是π-π*跃迁,是分子内电荷转移,吸收光谱是电子吸收光谱,位于近紫外-可见光区.D516和D565有望成为比D5更优秀的用于DSSC的非金属有机染料分子.     

四硫富瓦烯作为染料敏化太阳能电池有机染料电子给体的理论研究(英文)

为了研究四硫富瓦烯(TTF)基团对有机染料敏化剂光电性能的影响,以咔唑染料Dye 1为原型,引入TTF基团作为电子给体,设计了咔唑染料Dye 2.采用密度泛函理论(DFT)和含时密度泛函理论(TD-DFT)分别计算模拟了纯染料分子和吸附团簇(TiO2)9后的形貌、分子轨道能级以及紫外-可见吸收光谱,采用周期性密度泛函理论计算模拟染料分子在二氧化钛(101)面吸附的表面形貌.结果发现:在有机染料中引入TTF基团有助于有机染料敏化剂在二氧化钛表面的抗团聚作用和分子内的电荷转移;最为重要的是,TTF基团的强给电子能力极大地增强了有机染料敏化剂的光捕获能力.所有的计算结果表明,TTF基团是一种非常有潜力改善染料敏化剂光电性能的给电子基团.     

吲哚并咔唑类衍生物载流子传输性质的理论研究

以密度泛函理论结合跳跃模型, 重点研究了氯原子和烷基链的引入对吲哚并咔唑类衍生物传输性质的影响. 计算结果表明, 与吲哚并[3,2-b]咔唑(1)相比, 氯原子的引入增大了2,8-二氯吲哚并[3,2-b]咔唑(2)和2,8-二氯-5,11-二己基吲哚并[3,2-b]咔唑(3)的最高占据分子轨道(HOMO)的离域程度, 而对最低未被占据分子轨道(LUMO)则无显著贡献, 但明显降低了二者的能级. 上述结果表明, 对于LUMO, 氯原子体现了吸电子效应, 而对于HOMO, 氯原子体现了共轭效应. 烷基链的引入使化合物3的空穴迁移率明显高于化合物1和2, 这主要归因于化合物3具有更加紧密的分子堆积, 尤其在跳跃路径A中, 具有更大的分子间电子耦合和轨道重叠. 同时能带结构的计算结果进一步证明, 氯原子和烷基链的同时引入大大改善了吲哚并咔唑类衍生物的电荷传输性能.     

四硫富瓦烯作为染料敏化太阳能电池有机染料电子给体的理论研究

为了研究四硫富瓦烯(TTF)基团对有机染料敏化剂光电性能的影响,以咔唑染料Dye 1 为原型,引入TTF基团作为电子给体,设计了咔唑染料Dye 2. 采用密度泛函理论(DFT)和含时密度泛函理论(TD-DFT)分别计算模拟了纯染料分子和吸附团簇(TiO₂)₉后的形貌、分子轨道能级以及紫外-可见吸收光谱,采用周期性密度泛函理论计算模拟染料分子在二氧化钛(101)面吸附的表面形貌. 结果发现：在有机染料中引入TTF基团有助于有机染料敏化剂在二氧化钛表面的抗团聚作用和分子内的电荷转移;最为重要的是,TTF 基团的强给电子能力极大地增强了有机染料敏化剂的光捕获能力. 所有的计算结果表明,TTF基团是一种非常有潜力改善染料敏化剂光电性能的给电子基团.     

呋喃查尔酮结构与电子光谱的密度泛函理论研究

在密度泛函理论的PBE1PBE/6-31G(d)水平上对呋喃查尔酮及其衍生物的几何结构进行优化计算.在获得基态稳定结构的基础上,应用含时密度泛函理论计算其电子吸收光谱,探讨了取代基和溶剂对电子吸收光谱的影响,计算结果与实验结果吻合很好,平均绝对偏差仅为3.3nm(0.04eV).结果表明,取代基的引入和溶剂极性的增大均使光谱发生红移.通过前线轨道分析,揭示了该类化合物的主要吸收峰均源自分子中HOMO→LUMO电子跃迁.     

7-吡啶吲哚同分异体结构与电子光谱性质的理论研究

运用密度泛函理论对7-吡啶吲哚可能存在的构型进行优化,计算异构体的几何构型、电子结构、前线分子轨道;应用含时密度泛函理论计算了异构体b,c和e的电子光谱性质以及溶剂效应对光谱性质的影响.结果表明,溶剂极性的增加使b的电子光谱蓝移,而c和e的电子光谱红移,且溶剂极性对最大吸收波长影响幅度较小.前线分子轨道分析,表明该类化合物的主要吸收光谱主要对应于分子中的HOMO→LUMO电子跃迁,且为π→π*跃迁.     

靛族染料发色体电子光谱性质的含时密度泛函理论研究

采用密度泛函方法(DFT)在B3LYP／6—31 ^*水平上对一系列靛族染料发色体的几何构型进行优化计算；在获得基态稳定结构的基础上，应用含时密度泛函理论(TD—DFT)在相同水平下计算其电子吸收光谱．探讨了不同给电子基团和发色体的延伸对电子吸收光谱的影响，得到了与对应母体化合物一致的变化规律．结果表明，给电子基团给电子能力的增强和发色体的纵向延伸分别使光谱产生一定红移和轻微的蓝移．通过对前线轨道组成进行自然布居分析，揭示了靛族染料的发光均源自分子中HOMO—LUMO(π→π^*)电子跃迁．     

推/拉电子取代基对PCBM结构及光谱性质影响的理论研究

应用密度泛函理论(DFT)方法计算[6,6]-苯基-C₆₁-丁酸甲酯(PCBM)及其苯环对位取代得到的4种衍生物的几何和电子结构. 采用第一激发能校正了分子的最低未占据分子轨道(LUMO)能级, 探讨了推/拉电子基团对分子前线轨道的影响. 在全优化几何构型的基础上, 采用含时密度泛函理论(TD-DFT)方法研究了电子吸收光谱特征和电荷转移态性质, 并讨论了推/拉电子基团对体系电子吸收光谱性质的影响. 通过对重组能和电子亲和势的计算, 预测了PCBM与4种衍生物的电子能力及电子迁移率大小的关系. 结果表明, 在PCBM中, 在苯环的对位引入推电子基团可以提高分子的前线轨道能级, 改变前线轨道电子云分布, 明显增强可见光范围内的吸收强度, 增加可见光范围内的电荷转移吸收, 且激发态的电荷转移随着引入基团推电子能力的增加而增强. 化合物5的激发态分子内电荷转移性质最强, 且具有较独特的光伏性质. 而在同样位置引入拉电子基团, 则降低了分子前线轨道能级对电子吸收光谱的影响.     

π桥中不同吸电子基团对三苯胺-氰基丙烯酸类染料敏化太阳能电池性能影响的理论研究

采用密度泛函理论和含时密度泛函理论计算了染料的紫外-可见吸收光谱、电子注入驱动力、半导体导带能级移动量以及染料与碘的相互作用能等一系列评价电池性能的理论参数,以解释在π桥上引入不同吸电子基团导致三苯胺-氰基丙烯酸基染料敏化太阳能电池光电转换效率降低的原因.结果表明,在染料π桥上引入吸电子基团虽可以在一定程度上改善吸收光谱,但同时也引入了额外的与电解质中碘相互作用的位点,加快了与电解质之间的复合速率,影响了电子注入驱动力,最终导致电池光电转换效率降低.因此,在设计高效光敏染料时除了考虑吸收光谱外,也应考虑染料与电解质之间的复合以及电子注入驱动力这2个影响电池性能的关键因素.     

Exploration on Charge Transfer and Absorption Spectra of Spiro[fluorene-9,90-xanthene]-based Polyoxometalate Hybrids Toward High Performance Dye-sensitized Solar Cell

Based on spiro[fluorene-9,90-xanthene](SFX, dye 1), the Lindqvist-type polyoxometalate(POM) functionalized with SFX and its derivatives(dyes 2-4) used in dye-sensitized solar cells(DSSCs) were designed and investigated with the density functional theory(DFT) and time-dependent DFT(TD-DFT) calculations. The results indicate that Lindqvist-type POM is the main contribution to the lowest unoccupied molecular orbital(LUMO) and affects the LUMO energies of dyes 2-4. The maximum absorptions of the designed dyes containing POM(dyes 2-4) are red shifted comparing with that of dye 1. The introduction of electron-donating group onto SFX segment is helpful to red shift the absorption spectra. The major factors affecting the performance of DSSCs, including light harvesting and electron injection were evaluated. Considering the absorption spectra and photovoltaic parameters, dyes 3 and 4 are promising high performance dye sensitizers in n-type DSSCs.     

Low band gap copolymers based on thiophene and quinoxaline: Their electronic energy levels and photovoltaic application

Low band gap conjugated copolymers containing donor (thiophene)‐acceptor (quinoxaline, Qx ) were synthesized via Stille coupling polymerization. The resulting copolymers were characterized by ¹H NMR, element analysis, GPC, TGA, and DSC. UV‐vis spectra indicated that the increase in the content of quinoxaline units increased the interaction strengthen of the polymer main chains and caused a red‐shift in the optical absorbance. Cyclic voltammetry was used to estimate energy levels of the lowest unoccupied molecular orbit (LUMO) and the highest occupied molecular orbit (HOMO), and the band gap (E_g) of the copolymers. The basic electronic structures of the copolymers were also studied by density‐functional theory (DFT) calculations. Both the experimental and calculation results indicated an increase in the HOMO energy level with increasing the content of quinoxaline units, whereas the corresponding change in the LUMO energy level is much smaller. Polymer photovoltaic cells (PVCs) were fabricated with the structure of ITO/PEDOT:PSS (30 nm)/active layer (80 nm)/Ca (8 nm)/Al(140 nm). The results show that the introduction of a proper amount of electron‐acceptor groups in the polymer main chains induces an extension of the absorption spectra and improves the photovoltaic properties of the copolymers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3399–3408, 2009     

Conjugate spacer effect on molecular structures and absorption spectra of triphenylamine dyes for sensitized solar cells: density functional theory calculations

The molecular structures and absorption spectra of triphenylamine dyes containing variable thiophene units as the spacers (TPA1-TPA3) were investigated by density functional theory (DFT) and time-dependent DFT. The calculated results indicate that the strong conjugation is formed in the dyes and the length of conjugate bridge increases gradually with the increased thiophene spacers. The interfacial charge transfer between the TiO2 electrode and TPA1-TPA3 are electron injection processes from the excited dyes to the semiconductor conduction band. The simulated absorption bands are assigned to π→π* transitions, which exhibit appreciable red-shift with respect to the experimental bands due to the lack of direct solute-solvent interaction and the inherent approximations in TD-DFT. The effect of thiophene spacers on the molecular structures, absorption spectra and photovoltaic performance were comparatively discussed and points out that the choice of appropriate conjugate bridge is very important for the design of new dyes with improved performance.     

Donor-pi-acceptor conjugated copolymers for photovoltaic applications: tuning the open-circuit voltage by adjusting the donor/acceptor ratio

A class of new conjugated copolymers containing a donor (thiophene)-acceptor (2-pyran-4-ylidene-malononitrile) was synthesized via Stille coupling polymerization. The resulting copolymers were characterized by 1H NMR, elemental analysis, GPC, TGA, and DSC. UV-vis spectra indicated that the increase in the content of the thiophene units increased the interaction between the polymer main chains to cause a red-shift in the optical absorbance. Cyclic voltammetry was used to estimate the energy levels of the lowest unoccupied molecular orbital (LUMO) and the highest occupied molecular orbital (HOMO) and the band gap (Eg) of the copolymers. The basic electronic structures of the copolymers were also studied by DFT calculations with the GGA/B3LYP function. Both the experimental and the calculated results indicated an increase in the HOMO energy level with increasing the content of thiophene units, whereas the corresponding change in the LUMO energy level was much smaller. Polymer photovoltaic cells of a bulk heterojunction were fabricated with the structure of ITO/PEDOT/PSS (30 nm)/copolymer-PCBM blend (70 nm)/Ca (8 nm)/Al (140 nm). It was found that the open-circuit voltage (Voc) increased (up to 0.93 V) with a decrease in the content of thiophene units. Although the observed power convention efficiency is still relatively low (up to 0.9%), the corresponding low fill factor (0.29) indicates considerable room for further improvement in the device performance. These results provided a novel concept for developing high Voc photovoltaic cells based on donor-pi-acceptor conjugated copolymers by adjusting the donor/acceptor ratio.     

氮混杂金属卟啉吸收光谱性质的理论研究

采用密度泛函理论在B3LYP/6-31+G(d)水平上研究了4种金属Mg, Ni, Cu, Zn配位的自由卟啉(FBP)及氮混杂卟啉(NECP)的几何结构及分子轨道能级. 采用含时密度泛函理论(TD-DFT)方法计算了金属与2种卟啉配位后在气体条件下的电子吸收光谱, 包括激发能、 吸收波长、 跃迁组成和振子强度.计算结果表明, 与金属配位的FBP(M-FBP)具有D_4h对称性, 分子轨道能级HOMO/HOMO-1和LUMO/LUMO+1因能级相近发生简并, HOMO-LUMO轨道能级差大约3.0 eV, 在Soret带出现较强吸收峰.由于C/N原子位置的改变, 非对称性结构的M-NECP前线轨道组成发生改变, 轨道能级差(HOMO-LUMO)减小至2.6 eV左右, 且能级发生分裂, Soret带出现多个电子吸收谱峰, Q带也出现吸收峰. 本文研究了水、 氯仿和苯3种不同极性溶剂对M-FBP和M-NECP的分子轨道及电子吸收光谱的影响, 结果表明, 随溶剂极性减弱金属配合物的电子吸收光谱发生红移, 并且吸收峰强度增强.     

Mono- and Di-Pyrene [60]Fullerene and [70]Fullerene Derivatives as Potential Components for Photovoltaic Devices

In the present work, we report the successful synthesis and characterization of six (two new) fullerene mono- and di-pyrene derivatives based on C₆₀ and C₇₀ fullerenes. The synthesized compounds were characterized by spectral methods (ESI-MS, ¹H-NMR, ¹³C-NMR, UV-Vis, FT-IR, photoluminescence and photocurrent spectroscopy). The energy of HOMO and LUMO levels and the band gaps were determined from cyclic voltammetry and compared with the theoretical values calculated according to the DFT/B3LYP/6-31G(d) and DFT/PBE/6-311G(d,p) approach for fully optimized molecular structures at the DFT/B3LYP/6-31G(d) level. Efficiency of solar cells made of PTB7: C₆₀ and C₇₀ fullerene pyrene derivatives were analyzed based on the determined energy levels of the HOMO and LUMO orbitals of the derivatives as well as the extensive spectral results of fullerene derivatives and their mixtures with PTB7. As a result, we found that the electronic and spectral properties, on which the efficiency of a photovoltaic cell is believed to depend, slightly changes with the number and type of pyrene substituents on the fullerene core. The efficiency of constructed solar cells largely depends on the homogeneity of the photovoltaic layer, which, in turn, is a derivative of the solubility of fullerene derivatives in the solvent used to apply these layers by spincoating.     

染料敏化太阳能电池中额外给体引入对经典D-π-A型敏化剂性能影响的理论研究

为了探讨D-D-π-A型染料中双给体对敏化剂性能的影响, 本文结合密度泛函理论(DFT)及含时密度泛函理论(TD-DFT)对染料1~4的几何结构、 电子结构、 吸收光谱、 电化学性质、 电子复合程度以及半导体导带边缘的移动等进行了对比研究. 结果表明, 相比于经典的D-π-A型染料分子1, 在分子2~4(D-D-π-A型双给体染料) 中额外引入给体, 尽管对导带能级移动的改变不是很显著, 但是可以改变体系的共轭程度, 增加染料的光吸收强度. 重要的是, 额外给体的引入可以显著增加染料阳离子空穴-半导体之间的距离, 从而减缓注入电子与染料阳离子的复合; 在额外给体中引入杂原子可以使I₂聚集在染料外侧, 从而降低电解质在半导体表面的局域浓度, 进而减缓注入电子与电解质之间的复合速率. 因此, 通过在经典的D-π-A型染料上引入额外的电子给体构筑D-D-π-A型染料可以有效调节染料的光吸收、 电化学及电子复合等方面的性质, 是设计合成高性能染料的可行策略.     

Theoretical Studies on Structural and Spectroscopic Properties of Photoelectrochemical Cell Ruthenium Sensitizers-the Derivatives of N3

A series of dye molecules was designed theoretically. Particularly, azoles and their derivatives were chosen as the modifying groups linking to ancillary ligands of [Ru(dcbpyH₂)₂(NCS)₂](N3, dcbpy=4,4′-dicarboxy- 2,2′-bipyridine; NCS=thiocyanato). Density functional theory(DFT) based approaches were applied to exploring the electronic structures and properties of all these systems. The dye molecule with 1,2,4-triazole groups which exhibits a very high intensity of absorption in visible region, was obtained. Time-dependent DFT(TD-DFT) results indicate that the ancillary ligand dominates the molecular orbital(MO) energy levels and masters the absorption transition nature to a certain extent. The deprotonation of anchoring ligand not only affects the frontier MO energy levels but also controls the energy gaps of the highest occupied MO(HOMO) to the lowest unoccupied MO(LUMO) and LUMO to LUMO+1 orbital. If the gap between LUMO-LUMO+1 is small enough, the higher efficiency of dye-sensitized solar cell(DSSC) should be expected.