P(NIPAAm-co-Aam)共聚凝胶和PAAc/P(NIPAAm-co-Aam) IPN凝胶的溶胀与释药性能

P(NIPAAm-co-Aam)共聚凝胶和PAAc/P(NIPAAm-co-Aam) IPN凝胶的溶胀与释药性能;N-异丙基丙烯酰胺;丙烯酰胺;丙烯酸;共聚;互穿聚合物网络;水凝胶;溶胀;释药     

聚乙二醇相对分子质量及用量对温敏型PCL-PEG-PCL水凝胶的制备及释药性研究

采用开环聚合法制备PCL-PEG-PCL共聚物,并将其制成温敏性水凝胶,探究了PEG(聚乙二醇)相对分子质量及质量浓度对水凝胶温敏性的影响.水凝胶的相变温度由翻转小瓶法测定.通过FTIR、热分析仪和SEM等技术对其组成及结构进行表征.以疏水性姜黄素(Cur)为模型药物,制备出载Cur PCL-PEG-PCL水凝胶,并研究其体外释药行为.FTIR结果表明:实验制备的共聚物中含有PCL和PEG的链段.热分析结果表明:在25℃~65℃内水凝胶存在相变过程.SEM结果表明:水凝胶剖面具有疏松多孔.体外释药结果表明:PCL-PEG-PCL水凝胶对Cur具有缓释作用,释药机理符合Higuchi骨架溶蚀模型.     

P(γ-PGA-co-NIPAAm)水凝胶对5-氟尿嘧啶药物分子的释放行为

以γ-聚谷氨酸(γ-PGA)、N-异丙基丙烯酰胺(NIPAAm)为单体,通过自由基共聚法制备一种水凝胶缓释材料。采用扫描电镜观察水凝胶的多孔断面形貌,并研究不同温度(25℃和37℃)下水凝胶表面的亲疏水性和不同pH(2.0~10.0)时的溶胀率变化。将该共聚水凝胶用作药物缓释载体,通过紫外分光光度计法研究其对5-氟尿嘧啶(5-FU)药物分子的缓释行为。结果表明:该凝胶在酸性条件下释药速率最快,碱性条件下次之,中性条件下释放最慢,25℃下释放量与γ-PGA含量呈正相关,37℃下结果相反;该凝胶具有温度、pH双敏感性,在弱碱性条件下释放缓慢、释药量小,具有一定的靶向释药能力。     

温敏性乙二醇壳聚糖水凝胶的制备及药物缓释性能

以乙二醇壳聚糖为原料, 乙酸酐为酰化剂, 通过N-乙酰化反应, 制得了新型温敏性高分子乙酰化乙二醇壳聚糖. 通过核磁共振氢谱(¹H NMR)、 傅里叶变换红外光谱(FTIR)及试管倒置法对乙酰化乙二醇壳聚糖的结构及温敏性进行了表征, 通过扫描电子显微镜(SEM)和紫外-可见分光光度计(UV-Vis)对水凝胶的微观形貌和体外药物释放性能进行了研究. 结果表明, 随着反应时间和乙酸酐与乙二醇壳聚糖氨基摩尔比的增加, 产物的乙酰度逐渐增加; 乙酰化乙二醇壳聚糖溶液具有热可逆温敏性溶胶-凝胶转变行为, 可以通过控制乙酰化乙二醇壳聚糖的乙酰度和溶液浓度, 使溶胶-凝胶转变温度处于室温至体温(25~37 ℃)之间; 乙酰化乙二醇壳聚糖水凝胶具有“高度孔隙化且孔隙之间相互连通”的结构特点, 通过控制乙酰度和溶液浓度, 可使其孔径大小处于1~40 μm范围内; 乙酰化乙二醇壳聚糖水凝胶的乙酰度为89.90%时, 质量分数为5%~7%的水凝胶对抗癌药物吉西他滨具有缓释作用, 载药凝胶的释药时间可达3~5 d. 乙酰化乙二醇壳聚糖有望在药物释放及组织工程等领域得到广泛应用.     

超分子水凝胶作为胰岛素缓释体系的研究

利用α-环糊精(α-CD)与含有聚乙二醇(PEG)链段的聚合物Pluronic F127的超分子作用制备水凝胶.该物理交联水凝胶的交联点包括α-CD与PEG链包合物堆积形成的微晶区和聚合物疏水链段聚集区.优化水凝胶组分,得到具有较低固含量和较短凝胶化时间的体系用于胰岛素的负载和释放研究.通过X射线衍射(XRD),扫描显微镜(SEM)对水凝胶结构进行表征.通过紫外分光光度计监测胰岛素的释放过程,结果表明,水凝胶释药时间约为65 h,且释放曲线较为平缓.细胞毒性实验结果表明该水凝胶材料对细胞生长无明显抑制作用.小鼠体内释药实验结果表明该水凝胶载体对延长胰岛素的释药时间有一定效果,可作为多肽类药物的缓释体系.     

弱聚电解质水凝胶溶胀释药的数值模拟

在三相模型的基础上,结合Langmuir等温吸附方程和药物释放方程,建立了弱聚电解质水凝胶溶胀释药的数学模型;运用有限元方法,研究了药物在弱聚电解质水凝胶内均匀分布时凝胶体系的材料参数对溶胀及释药性能的影响;分析了水凝胶在不同阶段的释药机理;比较了药物在载药基体内的均匀分布和不均匀分布模式对凝胶释药性能的影响,当药物在载药基体内正弦分布时呈现零级释药动力学特点;对比分析了模拟结果与实验结果,验证了弱聚电解质水凝胶溶胀释药模型的准确性.     

八乙烯基多面体低聚倍半硅氧烷-N-异丙基丙烯酰胺共聚物有机-无机杂化水凝胶的合成与表征

以N-异丙基丙烯酰胺(NIPAM)和八乙烯基笼形低聚倍半硅氧烷(OVPOSS)为单体,通过溶液自由基共聚合成了一系列P(OVPOSS-co-NIPAM)有机-无机杂化水凝胶.采用傅立叶红外光谱(FTIR)、扫描电镜(SEM)、X-射线衍射(XRD)、示差扫描量热仪(DSC)、热重分析仪(TGA)和动态粘弹谱仪(DMA)对其结构与性能进行了研究.结果表明可以通过控制投料比来调节P(OVPOSS-co-NIPAM)杂化水凝胶中POSS的实际含量;P(OVPOSS-co-NIPAM)杂化水凝胶的微观形貌为孔洞结构,随POSS含量的增加,孔径逐渐减小;所合成的P(OVPOSS-co-NIPAM)杂化水凝胶均具有温敏性,随着POSS含量的增加,其最低临界溶解温度(LCST)由33.0℃降低至30.0℃,均低于常规水凝胶(33.7℃);POSS的引入使PNIPAM水凝胶的玻璃化转变温度(Tg)由142℃升至148℃,并改善了其热稳定性和力学强度.     

羧甲基壳聚糖水凝胶制备及其在药物控释中的应用

以戊二醛为交联剂制备了一系列羧甲基壳聚糖pH敏感水凝胶 .研究了合成条件对羧甲基壳聚糖水凝胶溶胀性能的影响 .实验结果表明羧甲基壳聚糖的脱乙酰度、交联剂用量对水凝胶溶胀率的影响较大 .pH=3 0时 ,水凝胶收缩 ,而pH =1 0 ,5 0 ,7 4 ,9 0时 ,水凝胶溶胀 ,且在碱性条件下水凝胶的溶胀率远大于酸性条件下的溶胀率 .包埋在此水凝胶中的水杨酸释放随载药介质的pH值和水凝胶半径大小的变化而显著不同 ,pH =1 0条件下载药的水凝胶的释药率大于pH =7 4 ,12 0条件下的释药率 ,且水凝胶的半径越大 ,释药速度和释药率也越大     

NIPAAm系互穿网络凝胶的合成及载药释药性能研究

合成了三种亲疏水性不同的温度及pH敏感的PAAc／P（NIPAAm-co-BMA）、PAAc／PNIPAAm和PAAc／P（NIPAAm-co-AAm）互穿网络（IPN）水凝胶,以水杨酸钠和水杨酸为模型药物,研究了温度、pH值及药物和凝胶的亲疏水性相互作用对模型药物释药性能的影响。研究结果表明,随着凝胶亲水性的增强,水杨酸钠的载药率提高,释药率也越大;相反疏水性增强也有利于提高水杨酸的载药率;IPN凝胶在水中的释药过程属于溶胀支配型释放,药物释放率随凝胶的亲水性增强而增强,同时,载药凝胶在45℃水中的释药率大于25℃时的释药率。在25℃时,水杨酸在pH=2．2的缓冲溶液中几乎不释放,而在pH=7．4的缓冲溶液中能以较快的速率释放。     

聚谷氨酸基超分子水凝胶的制备和表征

以接枝胆固醇的聚谷氨酸-聚乙二醇-聚谷氨酸三嵌段聚合物和接枝β-环糊精的聚谷氨酸为前躯体,通过主客体作用制备聚谷氨酸基超分子水凝胶.通过调控前躯体的浓度、胆固醇和环糊精的摩尔比,得到不同力学性能的水凝胶;改变三嵌段聚合物中聚谷氨酸的分子量,调控聚谷氨酸基超分子水凝胶的力学强度、微观形貌、溶胀行为和降解性能.研究结果表明,当聚合物浓度为150 g/L、环糊精和胆固醇的摩尔比为1∶1时,水凝胶的储存模量最大;聚谷氨酸的分子量越大,水凝胶的储存模量越大;水凝胶平均孔径10~30μm,溶胀度16%~30%,降解时间为40~72 d.水凝胶细胞毒性实验结果表明超分子水凝胶具有良好的生物相容性.     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Acid hydrolysis of carboxymethylcellulose of low degree of substitution

Cotton cellulose was swollen in a sodium hydroxide solution and carboxymethylated by a two-bath method for different periods of time for each process. The kinetics of acid hydrolysis and the crystallinity of the swollen and carboxymethylated samples were measured. The proportion of broken bonds, rate constants for hydrolysis, and permeability of cellulose to hydrolyzing agents were calculated. The susceptibility of glycosidic linkages to acid hydrolysis was improved by carboxymethylation more than by swelling in alkali. The increased accessibility of carboxymethylcellulose to acid was regarded as a consequence of increased intra-and intercrystalline swelling and of the glycosidic bonds' weakness caused by the electron-attracting carboxymethyl group on the C-6 position.     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

Estimation of Kinetic Parameters of Thermal Oxidation of Ilmenite

The aim of the presented work was the investigation of thermal oxidation of ilmenite in static air atmosphere. The investigations were carried out by use of a derivatograph (MOM, Hungary). The changes of crystallographic structure of investigated samples were identified by X-ray diffractometry on Philips PW-1710 diffractometer. In temperature above 500°C appears structure of hematite Fe₂O₃. On the basis of the thermogravimetric measurements, the contracting area and contracting volume models were found as the best fitting experimental data. This revised version was published online in August 2006 with corrections to the Cover Date.     

Mechanism of action of base-catalyzed oxygenation of phenol derivatives

Cyclopropyl derivative of 2,6-di-tert-butylphenol is synthesized as a probe to investigate the mechanism of base-catalyzed autooxidation of phenol derivatives. Our study indicates that one electron reduction of molecular oxygen from phenolate gives phenoxyl radical 3, a key intermediate of autooxidation. The coupling of phenoxyl radical and superoxide radical gives peroxylate anion 4 and produces the final epoxy alcohol adduct 6.     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

化学计量中不确定度评定研究进展

测量不确定度是表征合理地赋予被测量之值的分散性的参数。本文针对化学计量不确定度评定基础模型仅适用于线性模型、概率分布为正态分布或缩放位移t分布等局限,介绍了近年来不确定度评定的研究热点:蒙特卡罗方法(Monte Carlo Method,MCM),不确定度评定的来源、评定概念、评估方法及其发展过程,扩大了测量不确定度评定与表示的适用范围。     

微量钙的测定方法研究进展

介绍了1995-2006年期间测定微量和痕量钙的方法,如电感耦合等离子体-原子发射光谱法、原子吸收光谱法以及离子色谱法等的工作原理和特点,并说明了其测定微量钙的应用领域。并对微量钙的测定技术进行了展望(引用文献55篇)。