(Ba, Sr)TiO3纳米棒的反相微乳法制备与表征

在氢氧化钡和氢氧化锶水溶液/Triton X-100/环己烷/正己醇四元W/O型反相微乳液中制备了钛酸锶钡纳米棒, 研究了ω₀值(水与表面活性剂Triton X-100的物质的量之比)、反应物浓度、陈化时间对产品形貌和尺寸的影响, 用TEM, SAED, SEM, EDS和XRD等技术对产品进行了表征. 结果表明, 所得Ba_0.7Sr_0.3TiO₃纳米棒长约500～1200 nm、直径约为50～120 nm; 具有立方相单晶结构. 产品中钡、锶、钛的物质的量之比约为0.7∶0.3∶1.     

(Ba, Sr)TiO3纳米棒的反相微乳法制备与表征

在氢氧化钡和氢氧化锶水溶液/Triton X-100/环己烷/正己醇四元W/O型反相微乳液中制备了钛酸锶钡纳米棒, 研究了ω₀值(水与表面活性剂Triton X-100的物质的量之比)、反应物浓度、陈化时间对产品形貌和尺寸的影响, 用TEM, SAED, SEM, EDS和XRD等技术对产品进行了表征. 结果表明, 所得Ba_0.7Sr_0.3TiO₃纳米棒长约500～1200 nm、直径约为50～120 nm; 具有立方相单晶结构. 产品中钡、锶、钛的物质的量之比约为0.7∶0.3∶1.     

间歇式水热合成制备丝光沸石膜及其异丙醇脱水应用

采用市售廉价大孔α-Al₂O₃管作为基质材料，通过热浸渍法在管外表面涂敷晶种，随后在无模板剂体系下，利用新型的间歇式水热合成法制备丝光沸石膜。对比了传统加热和间歇式加热对丝光沸石膜形貌、结构及渗透蒸发异丙醇脱水分离性能的差异。考察了合成液中Na₂O/SiO₂、SiO₂/Al₂O₃和NaF/SiO₂物质的量之比在间歇式水热合成下对丝光沸石膜的影响。研究结果表明，当合成液中Na₂O/SiO₂、SiO₂/Al₂O₃和NaF/SiO₂物质的量之比分别为0.24、16.7和0.25时，制备的丝光沸石膜渗透蒸发异丙醇脱水分离性能最佳，在75℃下，对异丙醇/水(9∶1，w/w)的渗透通量达5.60 kg·m^-2·h^-1，水对异丙醇的分离因数大于10 000。     

制备高比表面积碳化硅的几种影响因素

采用溶胶凝胶法，以蔗糖和正硅酸乙酯(TEOS)为原料，草酸为TEOS水解的催化剂，制备均相碳化硅前驱体，在氩气氛和高温条件下(1 350～1 600 ℃)将碳化硅先驱体进行碳热还原，制备出高比表面积的SiC。考察了水/TEOS物质的量的比、碳/硅物质的量的比及镍盐等因素对碳化硅比表面积的影响。结果表明，当n_water/n_TEOS=7.5，n_C/n_Si=4时，适宜的镍催化剂(n_Ni/n_TEOS=0.005)，凝胶形成的时间最短，镍盐的加入可使碳热还原温度降低200 ℃。     

反相微乳液法制备纳米Al2O3颗粒及其形成反应机理的研究

通过聚乙二醇辛基苯基醚(曲拉通X-100)/正丁醇/环己烷/水溶液形成的体系, 采用反相微乳液法合成了Al₂O₃纳米粒子. 对前驱体进行热分析(TG-DTG-DTA), 确定了合适的煅烧温度为1150 ℃. 采用X射线衍射(XRD)、透射电镜(TEM)、紫外可见分光光度法(UV-vis)分别对产物的结构、粒度和形貌进行了表征, 考察了微乳液中水与表面活性剂的物质的量之比(ω_o)、煅烧温度和煅烧时升温速率等关键因素对产物形貌和晶相的影响, 并通过分析进一步揭示了Al₂O₃纳米粒子的形成机理. 结果表明, 控制ω_o为10、煅烧温度为1150 ℃可得到分散性好、粒径分布均匀的Al₂O₃纳米粒子, 且2 ℃/min的升温速率更有利于产物向稳定的α晶相转变.     

Ni-Fe/4A分子筛催化剂可控制备大内径碳纳米管

以乙醇为碳源,Ni-Fe/4A分子筛为催化剂,采用化学气相沉积法制备大内径碳纳米管(LIDCNTs)。研究了Ni/Fe的物质的量比(n_Ni∶n_Fe)、碳纳米管(CNTs)的制备温度、催化剂的煅烧温度和4A分子筛载体对CNTs内径的影响。采用TEM、SEM、XRD和BET对LIDCNTs和还原后的催化剂进行了分析。结果显示,LIDCNTs的内径随着CNTs的制备温度、催化剂的煅烧温度的升高和n_Ni∶<     

二丙胺的结构微调对磷酸铝分子筛晶化过程影响的凝胶组成依赖性

以二丙胺异构体（二正丙胺DPA和二异丙胺D-iPA）为结构导向剂,在200℃加热2组反应原料物质的量之比不同的初始凝胶,合成出了高结晶度的磷酸铝分子筛AlPO₄-11。利用X射线粉末衍射分析、元素分析等表征手段,研究了凝胶的晶化过程和液相的pH值以及Al和P的浓度演化。初始凝胶各组分物质的量之比为n_Al2O3：n_P2O5：n_DPA/D-iPA：n_H2O2=1.0：1.0：1.2：75时,以DPA为结构导向剂,晶化过程中无中间相生成,而以D-iPA为结构导向剂时,晶化过程中生成了具有12元环孔道结构的磷酸铝分子筛AlPO₄-5中间相;初始凝胶各组分物质的量之比为n_Al2O3：n_P2O5：n_DPA/D-iPA：n_H2O2=1.0：1.0：1.0：75时,以DPA为结构导向剂,晶化过程中生成了具有18元环孔道结构的磷酸铝分子筛VPI-5中间相,而以D-iPA为结构导向剂时,晶化过程中同时出现了VPI-5及AlPO₄-5两种中间相。表明对于同一种有机胺,凝胶物质的量之比的改变影响了其结构导向效应。理论计算结果显示质子化的DPA及D-iPA中N原子上的电荷有差异,表明有机胺的结构微调影响其结构导向效应,但该影响依赖于凝胶组成。     

磷化镍修饰磷掺杂氧化镓可见光催化水分解产氢

以Ga₂O₃半导体为前驱体,用浸渍加低温磷化法制备了P掺杂Ga₂O₃表面修饰Ni₂P光催化剂(x-Ni₂P/Ga₂O₃-P_y,x代表Ni²⁺和Ga₂O₃的物质的量之比,y代表NaH₂PO·H₂O与Ga₂O₃的物质的量之比)。5%-Ni₂P/Ga₂O₃-P₆催化剂展现出在纯水中光催化析氢的高活性,在430 nm光照下的光量子效率为0.22%。机理研究结果表明Ni₂P修饰和P掺杂扩展了催化剂的光响应范围,同时提升了载流子分离迁移效率,其长周期光催化反应稳定性明显优于未磷化催化剂。     

微乳液中球形及棒状SrTiO3纳米粒子的控制合成

以氢氧化锶和钛酸四丁酯为原料, 在水溶液/Triton X-100/环己烷/正己醇反相微乳液体系中制备了直径约为20～80 nm的钛酸锶球形纳米粒子和长约300～1200 nm、直径约为30～150 nm的钛酸锶纳米棒. 用XRD, ICP, TEM, SAED和SEM对样品的结构、成分和形貌进行了表征; 用DLS分析了样品的粒度分布. 结果显示, 水与表面活性剂的物质的量比(ω₀)、反应物浓度、陈化时间等因素都能影响钛酸锶纳米粒子的形貌和尺寸. 所得钛酸锶的锶钛物质的量比约为1.0, 粒度分布较窄, 为立方相单晶结构.     

芴-硫芴共聚物的电子结构和光谱性质的理论研究

用DFT-B3LYP方法对低聚物(PF30T)_n [n(芴)∶n(硫芴)＝2∶1, 物质的量之比, n＝1～4], (PF50T)_n [n(芴)∶n(硫芴)＝1∶1, 物质的量之比, n＝1～4]体系全优化, 得到两系列低聚物的电离能(IP_(a,v))、电子亲和势(EA_(a,v))、空穴抽取能(HEP)、电子抽取能(EEP). 在此基础上用ZINDO和TD-DFT方法计算吸收光谱, 分析了两个系列的HOMO-LUMO能隙随着n递增的变化趋势及硫芴含量对低聚物电子结构和光谱性质的影响, 推断了高聚物的电子和光谱性质. 用ab initio CIS方法优化了低聚物的S₁激发态结构并分析了其与发射光谱的关系. 研究显示: 2,8位引入的硫芴基团, 破坏了链的共轭, 而且随着硫芴含量的增加, HOMO-LUMO能隙变大, 光谱蓝移; 激发态结构趋于共面化.     

Copolymerization of ethylene and propylene catalyzed by magnesium chloride supported vanadium/titanium bimetallic Ziegler-Natta catalysts

Magnesium chloride supported vanadium/titanium bimetallic Ziegler-Natta catalysts with di-i-butyl phthalate as internal donor for copolymerization of ethylene and propylene were prepared.The effects of reaction temperature, ethylene/propylene molar ratio,aluminium/vanadium（Al/V）molar ratio and titanium/vanadium molar ratio on the catalytic activity were investigated.The molecular weight,molecular weight distribution,sequence composition and crystallinity of the products were measured by gel permeation chromatography,¹³C-NMR and differential scanning calorimetry analysis, respectively.In comparison to the vanadium and titanium catalysts,the bimetallic catalyst showed higher catalytic activity and better copolymerization performance.The obtained ethylene/propylene copolymers have high molecular weight （10⁵）,broad molecular weight distribution,high propylene content with random or short blocked sequence structures （r_Er_P=1.919）,low melting temperatures and low crystallinities（X_c<20%）.     

Highly Selective Vapor-Phase Acylation of Veratrole over H_3PO_4/TiO_2-ZrO_2: Using Ethyl Acetate as a Green and Efficient Acylating Agent

A simple sol‐gel method with and without surfactant was applied to prepare TiO₂‐ZrO₂ mixed oxides containing Ti and Zr at a molar ratio of 1:1. Several catalysts containing w=15% –35% H₃PO₄ were set up using these mixed oxides. The physical and chemical properties of catalysts were investigated by BET, SEM and pyridine adsorption‐desorption. The catalytic performance of each material was determined for the vapor‐phase acylation of veratrole (1,2‐dimethoxybenzene) to 3,4‐dimethoxyacetophenone (3,4‐DMAP), which was found to be the major product of the reaction of veratrole with ethyl acetate, with alkylated products being the minor products. 2,3‐Dimethoxyacetophenone (2,3‐DMAP) was not detected in the product stream. In the best experimental conditions, the alkylated products were less than 0.7%. This reaction may represent an environmentally friendly alternative to use the ethyl acetate as the acylating reagent. The feed molar ratios of veratrole/ethyl acetate were varied over a wide range of 0.1 to 1, and the optimum feed ratio of veratrole/ethyl acetate was 1:3. Space velocity employed in the veratrole acylation reported as WHSV (veratrole) was 1.2 h^?1. The acylation reactions were carried out in the temperature range of 423 to 673 K and the optimum H₃PO₄ content for acylation was w=15%.     

形貌可控ZnO微纳米结构的水热合成及光催化性能

以乙醇胺为辅助溶剂,采用水热合成法,制备了花状、梭状和剑状的ZnO微纳米结构。采用扫描电镜(SEM)、X射线衍射(XRD)、光致发光光谱(PL)和拉曼光谱等测试手段对样品的形貌、结构、晶相等进行了表征。结果表明所有样品均为六方纤锌矿结构ZnO;其形貌和结晶度可通过改变物质的量的配比nZn2+/nOH-来调控。探讨了反应物配比对产物形貌结构的影响,乙醇胺对不同形貌ZnO的制备起到至关重要作用。以亚甲基蓝为目标降解物,采用紫外-可见吸收光谱(UV-Vis)并结合低温氮吸附-脱附比表面测试(BET),研究了花状、梭状和剑状ZnO的光催化活性。结果表明,与商用ZnO相比,制备的ZnO具有更好的光催化活性;样品催化活性与其比表面积不成正比,具有最小比表面积的花状ZnO拥有最好的光催化活性,这可能是由于其低的结晶度和特殊的花状形貌所致。     

Preparation of linear low‐density polyethylene by the in situ copolymerization of ethylene with an iron oligomerization catalyst and rac‐ethylene bis(indenyl) zirconium (IV) dichloride

An iron oligomerization catalyst, [(2‐ArN?C(Me))₂C₅H₃N]FeCl₂ [Ar = 2,6‐C₆H₃(F)₂], was combined with rac‐ethylene bis(indenyl)zirconium (IV) dichloride [rac‐Et(Ind)₂ZrCl₂] to prepare linear low‐density polyethylene (LLDPE) by the in situ copolymerization of ethylene. A series of LLDPEs with different properties were prepared by the alteration of the reaction temperature, Fe/Zr molar ratio, Al/(Fe + Zr) molar ratio, and reaction time. The structures of the polymers were characterized with differential scanning calorimetry, ¹³C NMR, gel permeation chromatography (GPC), and so forth. The melting points, crystallizations, and densities of the resulting products increased, and the average branching degree decreased, as the reaction temperature, Al/(Fe + Zr) ratio, and reaction time increased. The melting points, crystallizations, and densities of the polymers decreased, and the average branching degree increased, when the Fe/Zr ratio increased. The ¹³C NMR and GPC results showed that there were no unreacted α‐olefins remaining in the resulting polymers because the percentage of low‐molar‐mass sections (C₄–C₁₀) of the oligomers obtained with this catalyst was very high (>70%). In addition, the formation of polymers with two melting points under different reaction conditions was examined in detail, and the results indicated that the two melting points of the polymers could be attributed to polyethylene with different branches. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 984–993, 2005     

形貌可控ZnO微纳米结构的水热合成及光催化性能

以乙醇胺为辅助溶剂,采用水热合成法,制备了花状、梭状和剑状的ZnO微纳米结构。采用扫描电镜（SEM）、Ｘ射线衍射（XRD）、光致发光光谱（PL）和拉曼光谱等测试手段对样品的形貌、结构、晶相等进行了表征。结果表明所有样品均为六方纤锌矿结构ZnO;其形貌和结晶度可通过改变物质的量的配比n_Zn²⁺/n_OH^-来调控。探讨了反应物配比对产物形貌结构的影响,乙醇胺对不同形貌ZnO的制备起到至关重要作用。以亚甲基蓝为目标降解物,采用紫外-可见吸收光谱（UV-Vis）并结合低温氮吸附-脱附比表面测试（BET）,研究了花状、梭状和剑状ZnO的光催化活性。结果表明,与商用ZnO相比,制备的ZnO具有更好的光催化活性;样品催化活性与其比表面积不成正比,具有最小比表面积的花状ZnO拥有最好的光催化活性,这可能是由于其低的结晶度和特殊的花状形貌所致。     

Effect of Zr/Ce molar ratio on the structure of powders and Zr1−x Ce x O2 coatings on quartz fiber reinforced polyimide matrix composites via sol–gel process

In this investigation, Zr_1−x Ce _x O₂ coatings were fabricated on quartz fiber reinforced polyimide matrix composites via sol–gel process at 400 °C. The phase evolution, structural and morphological characteristic of specimens were investigated by differential scanning calorimetric, Fourier transform infrared spectroscopy, powder X-ray diffraction and scanning electron microscopy. The significant phase evolution of final powders with the decreasing Zr/Ce molar ratio could be observed as follows: tetragonal (t′) → cubic + tetragonal (t′) → tetragonal (t″). BET specific surface areas of powders exhibited a decreased tendency with the increasing calcination temperature as well as the decreasing Zr/Ce molar ratio. The average crystallite size and the mean particle size increased with the elevated calcination temperature, while the particle size also increased with the increase in Ce content. The progressive addition of Ce could promote the sintering process and the densification of coating. Morphologies of coatings changed with the variation of the Zr/Ce molar ratio. The results indicate that Zr_0.75Ce_0.25O₂ coating with the Zr/Ce molar ratio of 3 is a stable uniform coating with excellent adhesion.     

Hyperbranched bisphosphinoamine ligands: synthesis,characterization and application in ethylene oligomerization

Two hyperbranched bisphosphinoamine (PNP) ligands and chromium complexes were synthesized in good yield with 1.0 generation (1.0 G) hyperbranched macromolecules, chlorodiphenylphosphine (Ph₂PCl) and CrCl₃(THF)₃ as raw materials. The hyperbranched PNP ligands and chromium complexes were characterized by FT-IR, ¹H NMR, ³¹P NMR, UV and ESI-MS. Comparing with the chromium complexes, the hyperbranched PNP ligands, in combination with Cr(III), and activation by methylaluminoxane (MAO) in situ generated species with better catalytic performance for ethylene oligomerization. The effect of solvent, chromium source, ligand/Cr molar ratio, reaction temperature, Al/Cr molar ratio and reaction pressure on the catalytic activity and product selectivity were studied. The results showed that with increase of ligand/Cr molar ratio, reaction temperature and Al/Cr molar ratio, the catalytic activity increased at first and then decreased. However, the catalytic activity continuously increased with increase of reaction pressure. Under the optimized conditions, the catalytic system of hyperbranched PNP/Cr(III)/MAO led to catalytic activity of 2.68 × 10⁵ g/(mol Cr·h) and 37.71% selectivity for C₆ and C₈.     

多面体倍半硅氧烷制备有序介孔氧化硅材料

Octa(tetramethylammonium)-polyhedral oligomeric silsesquioxane(TMA-POSS) with cage-like structure was synthesized, the structure was characterized by NMR, FTIR and Elemental analyses. The mesoporous silica was prepared under alkaline condition using TMA-POSS as the silicon source and hexadecyltrimethylammonium bromide (CTAB) as the template, the structures of these products were characterized by XRD, TEM and nitrogen adsorption and desorption methods. The results indicate that the synthesized silica exhibites a well-ordered hexagonal pore structure with larger specific surface area. With increasing of CTAB molar ratio, the spacing of the crystal plane d100 is increased. The effects of the pH values on the mesoporous structure in the reaction system with different molar ratio of nPOSS / nCTAB were investigated. The synthesis mechanism of mesoporous silica was also discussed.