Green synthesis of zinc oxide nanoflowers using Hypericum triquetrifolium extract: characterization,antibacterial activity and cytotoxicity against lung cancer A549 cells

Zinc oxide nanoparticles have attracted significant interest in recent years due to their unique multifunctional chemical and physical properties along with their biological activities. This study demonstrated for the first time the biogenetic synthesis of zinc oxide nanoparticles by utilization of the methanolic extract of Hypericum triquetrifolium (HT). The obtained nanoparticles (HT-ZnO) were characterized by ultraviolet–visible spectroscopy (UV–Vis), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), dynamic light scattering (DLS), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), and transmission electron microscopy (TEM). The shape of the resulted nanoparticles is fusiform nanoflowers with an average hydrodynamic size of 275.46 ± 0.20 nm and a zeta potential of −8.23 ± 0.26 mV. SEM micrographs revealed that HT-ZnO nanoflowers have a multi-process structure in which one of the processes is large and the others have similar smaller dimensions. The synthesized nanoflowers have an average length of 312.28 ± 78.93 nm and the tip of its processes has a width of 48.69 ± 9.71 nm. The antimicrobial activity of HT-ZnO nanoflowers was performed using microbroth dilution format. It showed a bactericidal mode of action against Gram-positive Staphylococcus aureus and Enterococcus faecalis with MIC/MBC values of 20 μg/mL and 5 μg/mL, respectively. MTT assay had revealed that HT-ZnO nanoflowers caused a dose-dependent decline in the viability of A549 adenocarcinomic human alveolar basal epithelial cells with an IC₅₀ value of 20.45 μg/mL. The effect of HT-ZnO nanoflowers on the migration and colony formation abilities against the same cells was evaluated as well. In conclusion, zinc oxide nanoflowers were successfully synthesized using methanolic extract of H. triquetrifolium. The resulting particles showed a bactericidal effect against Gram-positiveS. aureus and E. faecalis and a cytotoxic activity against A549 cells.     

钨酸锌纳米结构的水热合成及其光催化性能研究

使用柠檬酸钠辅助的水热法合成了具有不同形貌的ZnWO4(如片状、花状)纳米颗粒,并采用X-射线粉末衍射(XRD)、场发射扫描电子显微镜(FESEM)、高分辨透射电子显微镜(HRTEM)等方法对样品的结构和组成进行表征。研究了溶剂组分和溶液pH值对产物形貌的影响。通过对反应产物形貌随时间变化的观察,提出了片状和花状ZnWO4纳米颗粒可能的生长机理。以罗丹明B(RhB)为催化降解对象,对样品在水溶液中的光催化性质进行了研究。结果表明,ZnWO4纳米颗粒的比表面积和孔径尺寸等结构特性对其光催化活性具有明显影响。     

锌离子掺杂的二氧化钛介孔空心微球的制备及光催化性能

以二氧化硅为模板,钛酸四丁酯(TBOT)为钛源,硝酸锌为锌源,采用溶胶凝胶法制备了锌离子掺杂的介孔二氧化钛空心微球。采用X射线衍射(XRD)、比表面积(BET)、透射电镜(TEM)、扫描电镜(SEM)和X射线光电子能谱(XPS)等技术对样品进行表征,以亚甲基蓝(MB)的光催化降解为目标反应评价其光催化活性。结果表明,去核之后的复合微球为空心微球,壁厚为20 nm左右。钛酸四丁酯溶液的滴加时间对微球的形貌影响较大,当滴加时间大于15 min时,可以得到结构清晰的空心微球。用氢氧化钠溶液去除二氧化硅核,反应90 min,二氧化硅可以被完全去除。X射线衍射表明,实验得到的掺杂锌离子的空心微球和没有掺杂锌离子的空心微球都是锐钛矿。当锌离子的摩尔分数为0.3%时,二氧化钛空心微球的晶粒尺寸最小,比表面积最大,催化亚甲基蓝降解的效率最高。     

锌离子掺杂的二氧化钛介孔空心微球的制备及光催化性能

以二氧化硅为模板,钛酸四丁酯（TBOT）为钛源,硝酸锌为锌源,采用溶胶凝胶法制备了锌离子掺杂的介孔二氧化钛空心微球。采用X射线衍射（XRD）、比表面积（BET）、透射电镜（TEM）、扫描电镜（SEM）和X射线光电子能谱（XPS）等技术对样品进行表征,以亚甲基蓝（MB）的光催化降解为目标反应评价其光催化活性。结果表明,去核之后的复合微球为空心微球,壁厚为20nm左右。钛酸四丁酯溶液的滴加时间对微球的形貌影响较大,当滴加时间大于15min时,可以得到结构清晰的空心微球。用氢氧化钠溶液去除二氧化硅核,反应90min,二氧化硅可以被完全去除。X射线衍射表明,实验得到的掺杂锌离子的空心微球和没有掺杂锌离子的空心微球都是锐钛矿。当锌离子的摩尔分数为0.3%时,二氧化钛空心微球的晶粒尺寸最小,比表面积最大,催化亚甲基蓝降解的效率最高。     

One-pot hydrothermal synthesis of willow branch-shaped MoS2/CdS heterojunctions for photocatalytic H2 production under visible light irradiation

Willow branch-shaped MoS₂/CdS heterojunctions are successfully synthesized for the first time by a facile one-pot hydrothermal method. The as-prepared samples were characterized by X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, transmission electron microscopy, nitrogen adsorption-desorption measurements, diffuse reflectance spectroscopy, and photoelectrochemical and photoluminescence spectroscopy tests. The photocatalytic hydrogen evolution activities of the samples were evaluated under visible light irradiation. The resulting MoS₂/CdS heterojunctions exhibit a much improved photocatalytic hydrogen evolution activity than that obtained with CdS and MoS₂. In particular, the optimized MC-5 (5 at.% MoS₂/CdS) photocatalyst achieved the highest hydrogen production rate of 250.8 μmol h^-1, which is 28 times higher than that of pristine CdS. The apparent quantum efficiency (AQE) at 420 nm was 3.66%. Further detailed characterizations revealed that the enhanced photocatalytic activity of the MoS₂/CdS heterojunctions could be attributed to the efficient transfer and separation of photogenerated charge carriers resulting from the core-shell structure and the close contact between MoS₂ nanosheets and CdS single-crystal nanorods, as well as to increased visible light absorption. A tentative mechanism for photocatalytic H₂ evolution by MoS₂/CdS heterojunctions was proposed. This work will open up new opportunities for developing more efficient photocatalysts for water splitting.     

Effect of Erbium on the Photocatalytic Activity of TiO2/Ag Nanocomposites under Visible Light Irradiation

Erbium co‐doped TiO₂/Ag catalysts are synthesized by using a simple, one‐step solvothermal method and characterized by X‐ray diffraction, field‐emission scanning electron microscopy, transmission electron microscopy, Raman analysis, X‐ray photoelectron spectroscopy, and diffuse reflectance spectroscopy. The catalysts exhibit anatase crystal structures with increased visible light absorption compared with pure TiO₂. Enhanced photocatalytic activity is observed with Er co‐doped TiO₂/Ag nanocomposites for Rhodamine B degradation under visible light irradiation. The photocatalytic activity of 1 % Er co‐doped TiO₂/Ag is much higher than that of TiO₂/Ag, TiO₂/Er, pure TiO₂, and commercial Degussa P25. The kinetics of the degradation process are studied and the pseudo‐first‐order rate constant (k) and half‐life time (t_1/2) of the reaction are calculated. The enhanced activity might be accredited to the efficient separation of electron–hole pairs by silver and higher visible light absorption of TiO₂ induced by Er.     

SiO2/TiO2-xCx/C的制备、表征及其吸附和可见光催化性能

以SiO2为成核中心,钛酸四丁酯为钛源,分别以多羟基化合物乙二醇、丙三醇、葡萄糖和聚乙烯醇为联接剂,采用水解沉淀法制备了碳掺杂和包覆的多孔SiO2/TiO2-xCx/C可见光响应型光催化剂。采用X-射线衍射(XRD)、透射电子显微镜(TEM)、X-射线光电子能谱(XPS)、傅里叶变换-红外光谱(FTIR)、比表面积(BET)和紫外-可见(UV-Vis)漫反射光谱对样品进行表征。对不同结构样品的形成机理进行了分析。以次甲基蓝(MB)溶液为模拟废水,对样品的吸附性能和可见光催化性能进行了评价。结果表明,多羟基化合物对材料的结构和性能有重要影响。碳的掺杂和包覆使材料的吸收光谱包含了整个可见光区,而多孔结构使材料的吸附性能得到提高。以聚乙烯醇为原料所得样品吸附性能最好,30 min内吸附率达到70%;而以丙三醇为原料所得样品具有最好的可见光催化性能,40 min内次甲基蓝的降解率达到95%。     

Improved solar-driven photocatalytic performance of BiOI decorated TiO2 benefiting from the separation properties of photo-induced charge carriers

In this work, BiOI decorated TiO₂ photocatalysts were prepared in-situ by a facile hydrothermal method and characterized by X-ray diffraction (XRD), UV/Vis diffuse reflectance spectroscopy, scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS) and surface photovoltage (SPV) spectroscopy. The reactive radicals during the photocatalytic reaction were detected by scavenger experiments. BiOI/TiO₂ composites exhibit higher performance than the pure TiO₂ towards photocatalytic decolorization of methyl orange (MO) aqueous solution, when the molar ratio of Bi/Ti is 2%, the sample has the highest photocatalytic activity. The enhanced photocatalytic performance of BiOI/TiO₂ could be ascribed to the separation properties of photo-induced charge carriers and strong interaction between BiOI and TiO₂. Based on the observations, a Z-scheme charge separation mechanism was proposed.     

Green synthesis and characterization of silver nanoparticles using Juniperus communis leaf extract: Catalytic activity in real-outdoor conditions and electrochemical properties

The present study investigates the green synthesis of stable silver nanoparticles using Juniperus communis leaf aqueous extract at room temperature. Synthesized silver nanoparticles (AgNPs) were characterized with different techniques such as UV–vis spectroscopy, Fourier transforms infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), Scanning electron microscopy (SEM-EDAX) and electrochemical method. Photocatalytic and anti-bacterial activities of synthesized AgNPs are evaluated based on the obtained result showed an efficient inhibition growth for gram negative P. Aeruginosa, E. Coli, and gram positive bacteria S.aureus. The AgNPs exhibited an excellent photocatalytic activity toward the degradation of methylene blue both indoor and outdoor, under sunlight, an efficiency of 95% was achieved. As an easy and environmentally friendly process, AgNPs based on Juniperus communis leaf extract could be applied for the degradation of pollutants and wastewater treatment.     

立方晶型Sb2O3纳米晶的合成及光催化性能

采用沉淀法合成了立方晶型Sb2O3纳米晶,通过X射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)、紫外-可见漫反射光谱(UV-Vis DRS)和电子自旋共振谱(ESR)等对样品进行了详细的表征。以紫外光光催化降解甲基橙为反应模型评价了样品的光催化性能。结果表明:沉淀法合成的立方晶型Sb2O3纳米晶颗粒小,表现出良好的光催化性能。对立方晶型Sb2O3纳米晶光催化降解甲基橙的原因进行了探讨,并提出了降解甲基橙的反应机理。     

Oxalic acid mediated synthesis of WO3·H2O nanoplates and self-assembled nanoflowers under mild conditions

Tungsten oxide hydrate (WO₃·H₂O) nanoplates and flower-like assemblies were successfully synthesized via a simple aqueous method. The effects of reaction parameters in solution on the preparation were studied. Nanoplates and nanoflowers can be selectively prepared by changing the amount of H₂C₂O₄. In-situ assembly of nanoplates to nanoflowers was also proposed for the formation of assembled nanostructures. In addition, the reaction time and temperature have important effects on the sizes of the as-obtained samples. Crystal structure, morphology, and composition of final nanostructures were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Optical properties of the synthesized samples and the growth mechanism were studied by UV-vis detection. Degradation experiments of Rhodamine B (RhB) were also performed on samples of nanoplates and nanoflowers under visible light illumination. Nanoflower sample exhibited preferable photocatalytic property to nanoplate sample.     

Structural,optical and photocatalytic activity of cerium doped zinc aluminate

Zinc aluminate and cerium-doped zinc aluminate nanoparticles are synthesised by co-precipitation method. Ammonium hydroxide is used as a precipitating agent. The synthesised compounds are characterised by powder X-ray diffraction (XRD), Fourier transform Infrared spectroscopy (FT-IR), Ultraviolet diffuse reflectance spectroscopy (UV-DRS), Thermogravimetric analysis (TGA), Scanning electron microscopy (SEM) and Surface area measurements. The photocatalytic activity of zinc aluminate and cerium doped zinc aluminate nanoparticles are studied under the UV light and visible light taking methylene blue as a model pollutant. The amount of catalyst, concentration of dye solution and time are optimised under UV-light. Degradation of methylene blue under the UV-light is found to be 99% in 20 min with 10 mg of cerium doped catalyst. Compared to visible light degradation, the degradation of dye under UV-light is higher. Cerium doping in zinc aluminate (ZnAl₂O₄:Ce³⁺) increased the photocatalytic activity of zinc aluminate.     

Rapid and solvent-free solid-state synthesis and characterization of Zn3V2O8 nanostructures and their phenol red aqueous solution photodegradation

Zinc vanadate (Zn₃V₂O₈) nanostructures have been successfully synthesized via simple, rapid and solvent-free solid-state method by using different complex precursors of Zn and NH₄VO₃ as novel starting materials. Effects of various zinc (II) Schiff base complex precursors and calcination temperatures were investigated to reach optimum condition. It was found that particle size and optical property of the as-prepared products could be greatly influenced via these parameters. The products were characterized by X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectra, energy dispersive X-ray microanalysis (EDX), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Photoluminescence and ultraviolet-visible (UV–Vis) spectroscopy. The photocatalytic activity of zinc vanadate nano and bulk structures were compared by degradation of phenol red aqueous solution.     

Microwave‐Hydrothermal Preparation and Visible‐Light Photoactivity of Plasmonic Photocatalyst Ag‐TiO2 Nanocomposite Hollow Spheres

Visible‐light‐driven plasmonic photocatalyst Ag‐TiO₂ nanocomposite hollow spheres are prepared by a template‐free chemically‐induced self‐transformation strategy under microwave‐hydrothermal conditions, followed by a photochemical reduction process under xenon lamp irradiation. The prepared samples are characterized by using scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, N₂ adsorption‐desorption isotherms, X‐ray photoelectron spectroscopy, UV/Vis and Raman spectroscopy. Production of ?OH radicals on the surface of visible‐light illuminated TiO₂ was detected by using a photoluminescence method with terephthalic acid as the probe molecule. The photocatalytic activity of as‐prepared samples was evaluated by photocatalytic decolorization of Rhodamine B (RhB) aqueous solution at ambient temperature under visible‐light irradiation. The results show that the surface plasmon absorption band of the silver nanoparticles supported on the TiO₂ hollow spheres was red shifted, and a strong surface enhanced Raman scattering effect for the Ag‐TiO₂ nanocomposite sample was observed. The prepared nanocomposite hollow spheres exhibits a highly visible‐light photocatalytic activity for photocatalytic degradation of RhB in water, and their photocatalytic activity is higher than that of pure TiO₂ and commercial Degussa P25 (P25) powders. Especially, the as‐prepared Ag‐TiO₂ nanocomposite hollow spheres at the nominal atomic ratio of silver to titanium ( R ) of 2 showed the highest photocatalytic activity, which exceeds that of P25 by a factor of more than 2.     

Enhanced electrochemical evolution of oxygen by using nanoflowers made from a gold and iridium oxide composite

We report on the synthesis of a composite made from iridium oxide and gold that has a flower-like morphology. The ratio of iridium oxide to gold can be controlled by altering the concentrations of the metal precursors or the pH of the solution containing the reductant citrate. Scanning electron microscopy, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and laser confocal micro-Raman spectroscopy were applied to characterize the structures of the nanoflowers, and a mechanism of their formation was deduced. The nanoflowers display an electrocatalytic activity in an oxygen evolution reaction (OER) that is significantly enhanced compared to bare iridium oxide nanoparticles. The highest turnover frequency for the OER of the new nanoflowers is 10.9?s^?1, which is almost one order of magnitude better than that of the respective nanoparticles. These attractive features are attributed to the high oxidation states of iridium in the nanoflowers which is caused by the transfer of electronic charge from metal oxides to gold, and also to the flower fractal structure which is thought to provide a much more accessible surface than suspensions of the respective nanoparticle.

Template‐free Fabrication of Hierarchical Macro‐/mesoporous N‐doped TiO2/graphene Oxide Composites with Enhanced Visible‐light Photocatalytic Activity

Hierarchical macro‐/mesoporous N‐doped TiO₂/graphene oxide (N‐TiO₂/GO) composites were prepared without using templates by the simple dropwise addition mixed solution of tetrabutyl titanate and ethanol containg graphene oxide (GO) to the ammonia solution, and then calcined at 350 °C. The as‐prepared samples were characterized by scanning electron microscopy (SEM), Brunauer‐Emmett‐Teller (BET) surface area, X‐ray diffraction (XRD), Raman spectroscopy, X‐ray photoelectron spectroscopy (XPS), and UV‐Vis absorption spectroscopy. The photocatalytic activity was evaluated by the photocatalytic degradation of methyl orange in an aqueous solution under visible‐light irradiation. The results show that N‐TiO₂/GO composites exhibited enhanced photocatalytic activity. GO content exhibited an obvious influence on photocatalytic performance, and the optimal GO addition content was 1 wt%. The enhanced photocatalytic activity could be attributed to the synergetic effects of three factors including the improved visible light absorption, the hierarchical macro‐mesoporous structure, and the efficient charge separation by GO.     

Comparison of the photonic effects of Mn-CNT/TiO<Subscript>2</Subscript> composites modified by different oxidants

Manganese-carbon nanotubes (CNTs) on titania (TiO₂) composites modified by different oxidants (KMnO₄, (NH₄)₂S₂O₈ and m-chlorperbenzoic acid (MCPBA)) were prepared with a sol-gel method. These composites were comprehensively characterized by the Brunauer-Emett-Teller (BET) method, scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy EDX, Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), transmission electron microscopy (TEM) and UV-vis absorption spectroscopy. The photoactivity of these materials prepared under visible light irradiation was tested using methylene blue in aqueous solution. The result shown that among the three oxidants, the MCPBA was the best one for the surface functionalization of CNTs and the manganese treated CNT/TiO₂ composite can enhance the photocatalytic activity. The proposed mechanism of the photodegradation of methylene blue on Mn-CNT/TiO₂ composites was present.     

Preparation,activity and photocatalysis mechanism of high‐performance AgBrO3/AgBr photocatalysts

AgBrO₃/AgBr compound photocatalysts were prepared via a precipitation method and characterized by X‐ray diffraction, field emission scanning electron microscopy, ultraviolet–visible diffusion spectroscopy, and solid surface fluorescence trials. The photocatalytic performances and mechanism were also investigated. It was found the 2.5 wt.% AgBrO₃/AgBr compound photocatalyst was most effective in dye degradation. The AgBrO₃/AgBr showed degradation rate up to 94.5% in a 10 mg/L MO (Methyl Orange) solution and was still very stable after five cycles of reuse. The AgBrO₃/AgBr photocatalysts could oxidize and decompose methyl orange molecules under visible light irradiation. The compounding largely improved the photocatalytic activity of AgBr. Photocatalytic mechanism experiments showed ·OH was the major active species.     

Plasmon-resonance-enhanced visible-light photocatalytic activity of Ag quantum dots/TiO2 microspheres for methyl orange degradation

We successfully prepared Ag quantum dots modified TiO₂ microspheres by facile solvothermal and calcination method. The as-prepared Ag quantum dots/TiO₂ microspheres were characterized by scanning electron microscope, transmission electron microscope, X-ray diffraction, X-ray photoelectron spectroscopy and UV-vis diffuse reflectance spectroscopy. The Ag quantum dots/TiO₂ photocatalyst showed excellent visible light absorption and efficient photocatalytic activity for methyl orange degradation. And the sample with the molar ratio of 0.05 (Ag to Ti) showed the best visible light photocatalytic activity for methyl orange degradation, mainly because of the surface plasmon resonance (SPR) effects of Ag quantum dots to generate electron and hole pairs for enhanced visible light photocatalysis. Finally, possible visible light photocatalytic mechanism of Ag quantum dots/TiO₂ microspheres for methyl orange degradation was proposed in detail.     

Facile synthesis of nanoscaled α-Fe2O3, CuO and CuO/Fe2O3 hybrid oxides and their electrocatalytic and photocatalytic properties

A facile and easily controlled route was designed to synthesize nano-structured Fe₂O₃, CuO, and CuO/Fe₂O₃ hybrid oxides with different Cu/Fe molar ratios via a hydrothermal procedure. The samples were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HR-TEM) and field-emission scanning electron microscopy (FE-SEM). The results showed that the morphologies of the samples changed with different Cu/Fe ratios. The electrocatalytic properties of the samples modified on a glassy carbon electrode for p-nitrophenol reduction in a basic solution were investigated. The results indicated that CuO/Fe₂O₃ hybrids with lower Cu/Fe ratio exhibited higher electrocatalytic activity. The photocatalytic performances of the samples for methyl orange degradation with assistance of oxydol under irradiation of visible light were studied. The results revealed that CuO/Fe₂O₃ hybrids with higher Cu/Fe ratio showed efficient photocatalytic activity.