Effective photocatalytic degradation of an azo dye over nanosized Ag/AgBr-modified TiO<Subscript>2</Subscript> loaded on zeolite

Zeolite-based photocatalysts were prepared by the sol-gel and deposition methods. The photocatalysts were characterised by X-ray diffraction, nitrogen adsorption-desorption isotherms, FTIR spectroscopy, scanning electron microscopy and energy-dispersive X-ray spectrometry. The activity of the prepared photocatalysts was evaluated by the UV-induced degradation of acid blue 92, a textile dye in common use. The effect of various parameters, such as catalyst concentration, initial dye concentration, thiosulphate concentration and pH, on the rate and efficiency of the photocatalytic degradation of acid blue 92 was investigated. The results showed that each parameter influenced the degradation rate and efficiency in a particular way. It was also found that, under optimised conditions, Ag/AgBr/TiO₂/zeolite exhibited the highest photocatalytic performance. A comparison of catalytic activity when exposed to visible light under the same conditions showed that the photocatalysts containing AgBr had the highest activity.     

F‐doped Ag/AgBr with enhanced visible‐light photocatalytic activity and mechanism

Novel F‐doped Ag/AgBr photocatalysts containing various amounts of F^? were synthesized by an ion exchange method. The photocatalysts were characterized using X‐ray diffraction (XRD), scanning and transmission electron microscopies, X‐ray photoelectron, ultraviolet–visible absorption and photoluminescence spectroscopies and electron spin resonance (ESR). Powder XRD revealed that F^? was inserted into the crystal lattices of AgBr and partially replaced Br^?, resulting in the contraction of the AgBr lattices. Methyl orange photodegradation experiments showed that the photocatalytic activity of F‐doped Ag/AgBr was significantly dependent on the amount of F^?. Ag/AgBr doped with 0.02 M F^? achieved the highest activity of 91% after 8 min. ESR showed the main active species in methyl orange degradation was ^?OH. The main enhancement mechanism is that F^? inhibits the recombination of electron–hole pairs.     

Novel Bi/BiOBr/AgBr composite microspheres: Ion exchange synthesis and photocatalytic performance

Novel Bi/BiOBr/AgBr composite microspheres were prepared by a rational in situ ion exchange reaction between Bi/BiOBr microspheres and AgNO₃. The characteristic of the as-obtained ternary microspheres was tested by X-ray diffraction (XRD), energy dispersive X-ray spectrometer (EDS), scanning electron microscope (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), UV–vis diffuse reflectance spectroscopy (UV–vis DRS) and photoluminescence (PL). Under visible light irradiation, Bi/BiOBr/AgBr microspheres exhibited an excellent photocatalytic efficiency for rhodamine B (RhB) degradation, which was about 1.4 and 4.9 times as high as that of Bi/BiOBr and BiOBr/AgBr, demonstrating that the highest separation efficiency of charge carriers in the heterostructured Bi/BiOBr/AgBr. The photocatalytic activity of Bi/BiOBr/AgBr microspheres just exhibited a slight decrease after three consecutive cycles. The photocatalytic mechanism investigation confirmed that the superoxide radicals (O₂^•−) were the dominant reactive oxygen species for RhB degradation in Bi/BiOBr/AgBr suspension.     

The Visible‐Light Photocatalytic Activity and Antibacterial Performance of Ag/AgBr/TiO2 Immobilized on Activated Carbon

Visible‐light‐driven Ag/AgBr/TiO₂/activated carbon (AC) composite was prepared by solgel method coupled with photoreduction method. For comparison, TiO₂, TiO₂/AC, and Ag/AgBr/TiO₂ were also synthesized. Their characteristics were analyzed by XRD, SEM‐EDS, TG‐DSC and UV–vis techniques. Photocatalytic activity and antibacterial performance under visible‐light irradiation were investigated by ICP‐AES, ATR‐FT‐IR and spectrophotometry methods using methylene blue and Escherichia coli as target systems, respectively. The results showed that Ag/AgBr was successfully deposited on anatase TiO₂/AC surface, and exhibited a distinct light absorption in the visible region. Ag/AgBr/TiO₂/AC displayed excellent antibacterial performance both in dark and under visible‐light illumination. The growth of E. coli cell was inhibited in the presence of Ag/AgBr/TiO₂/AC in dark. Moreover, upon visible‐light illumination, a significant damage of cell membrane was noticed. Ag/AgBr/TiO₂/AC was also shown higher photocatalytic efficiency for methylene blue degradation than those of TiO₂, TiO₂/AC, and Ag/AgBr/TiO₂. This is attributed to the synergetic effect between AC and Ag/AgBr/TiO₂, of which AC acts as the role of increasing reaction areas, continuous enriching, and transferring the adsorbed MB molecules to the surface of supported photocatalysts, and the Ag/AgBr/TiO₂ acts as a highly active photocatalyst for degrading MB molecules under visible‐light irradiation.     

Precise regulation of Ultra-thin platinum decorated Gold/Graphite carbon nitride photocatalysts by atomic layer deposition for efficient degradation of Rhodamine B under simulated sunlight

Atomic Layer Deposition (ALD) precise controlling ultra-thin platinum (Pt) modified Graphite carbon nitride (g-C₃N₄) photocatalysts, which had been doped with gold nanoparticles (Au NPs) by photodeposition, were successfully synthesized. The experimental results showed that precise regulation of platinum decorated C₃N₄-Au(C₃N₄-Au/nPt (n is the number of Pt ALD cycles, 1 Å per cycle)) exhibited excellent photocatalytic degradation ability for Rhodamine B (RhB). Under simulated sunlight irradiation, the degradation rate of 10 mg/L RhB(100 mL) by 1.5 mg C₃N₄-Au/10Pt catalysts was 95.8% within 60 min that is much better than other photocatalysts for the degradation of RhB. The efficient degradation mechanism of RhB by C₃N₄-Au/10Pt photocatalysts was studied and the experiments demonstrated the ·O₂^– as main active species played an important role in the photocatalytic process. Local surface plasmon resonance (LSPR) of Au NPs and Schottky barrier between Pt clusters and g-C₃N₄ may be the reasons for enhanced C₃N₄-Au/10Pt photocatalytic performances. Furthermore, the successive catalytic cycles revealed the excellent stability of C₃N₄-Au/10Pt photocatalyst.     

One-dimensional porous Ag/AgBr/TiO<Subscript>2</Subscript> nanofibres with enhanced visible light photocatalytic activity

One-dimensional (1D) Ag/AgBr/TiO₂ nanofibres (NFs) have been successfully fabricated by the one-pot electrospinning method. In comparison with bare TiO₂ NFs and Ag/AgBr/PVP (polyvinylpyrrolidone) NFs, the 1D Ag/AgBr/TiO₂ NFs photocatalyst exhibits much higher photocatalytic activity in the degradation of a commonly used dye, methylene blue (MB), under visible light. The photocatalytic removal efficiency of MB over Ag/AgBr/TiO₂ NFs achieves almost 100 % in 20 min. The photocatalytic reaction follows the first-order kinetics and the rate constant (k) for the degradation of MB by Ag/AgBr/TiO₂ NFs is 5.2 times and 6.6 times that of Ag/AgBr/PVP NFs and TiO₂ NFs, respectively. The enhanced photocatalytic activity is ascribed to the stronger visible light absorption, more effective separation of photogenerated electron-hole pairs, and faster charge transfer in the long nanofibrous structure. The Ag/AgBr/TiO₂ NFs maintain a highly stable photocatalytic activity due to its good structural stability and the self-stability system of Ag/AgBr. The mechanisms for photocatalysis associated with Ag/AgBr/TiO₂ NFs are proposed. The degradation of MB in the presence of scavengers reveals that h⁺ and ^?O ₂ ^? significantly contribute to the degradation of MB.     

高效Ag@AgBr等离子体光催化剂的制备及可见光活性研究

采用水热法和光致还原法制备了具有等离子体共振效应的Ag@AgBr可见光催化剂,利用XRD,SEM,EDX,DRS和XPS等手段对产物的结构和性能进行表征,并研究了催化剂在可见光下对罗丹明B(RhB)的光催化降解性能,考察了催化剂的循环使用及捕获剂对Ag@AgBr光催化性能的影响.结果表明:贵金属Ag纳米粒子的表面等离子体共振效应可显著增强Ag@AgBr对可见光的吸收;催化剂对罗丹明B具有较高的可见光降解活性和稳定性,在可见光下照射90 min,对罗丹明B的降解率达95%以上,光催化剂循环使用5次仍具有良好的光催化降解活性;淬灭实验表明在Ag@AgBr降解罗丹明B过程中,吸附在催化剂表面的h+、·OH、O2·-是主要的活性物种.     

Preparation of high‐activity AgBr/Ag3PO4 photocatalyst based on hexadecyltrimethylammonium bromide and mechanism of photocatalytic enhancement

A high‐activity AgBr/Ag₃PO₄ heterojunction photocatalyst was synthesized based on hexadecyltrimethylammonium bromide. Its microspheres were characterized using X‐ray diffractometry, transmission electron microscopy and ultraviolet–visible diffuse reflectance spectroscopy. The new photocatalyst with high photocatalytic activity exceptionally outperforms pure Ag₃PO₄ and AgBr in methyl orange degradation. The enhancement of photocatalytic activity is attributed to the efficient separation of electron–hole pairs. In this photocatalytic reaction, h⁺ and ^?O^2? are the main reactive species that induce visible‐light‐driven degradation.     

Novel ternary g-C3N4/Ag3VO4/AgBr nanocomposites with excellent visible-light-driven photocatalytic performance for environmental applications

Novel visible-light-induced photocatalysts were fabricated by integration of Ag₃VO₄ and AgBr semiconductors with graphitic carbon nitride (g-C₃N₄) through a facile refluxing method. The fabricated photocatalysts were extensively characterized by XRD, EDX, SEM, TEM, FT-IR, UV–vis DRS, BET, TGA, and PL instruments. The photocatalytic performance of these samples was studied by degradations of three dye contaminants under visible-light exposure. Among the ternary photocatalysts, the g-C₃N₄/Ag₃VO₄/AgBr (10%) nanocomposite displayed the maximum activity for RhB degradation with rate constant of 1366.6 × 10⁻⁴ min⁻¹, which is 116, 7.23, and 38.5 times as high as those of the g-C₃N₄, g-C₃N₄/AgBr (10%), and g-C₃N₄/Ag₃VO₄ (30%) photocatalysts, respectively. The effects of synthesis time and calcination temperature were also investigated and discussed. Furthermore, according to the trapping experiments, it was found that superoxide anion radicals were the predominant reactive species in this system. Finally, the ternary photocatalyst displayed superlative activity in removal of the contaminants under visible-light exposure, displaying great potential of this ternary photocatalyst for environmental remediation, because of a facile synthesis route and outstanding photocatalytic performance.     

Method for Visible Light‐Induced Photocatalytic Degradation of Methylparaben in Water Using Nanostructured Ag/AgBr@m‐WO3

An efficient method of photocatalytic degradation of methylparaben in water using Ag nanoparticles (NPs) loaded AgBr‐mesoporous‐WO₃ composite photocatalyst (Ag/AgBr@m‐WO₃), under visible light is presented. In this process, quantification of methylparaben in water was carried out by high‐performance liquid chromatography (HPLC) and the HPLC results showed a significant reduction of methylparaben in water due to the enhanced of photocatalytic degradation efficiency of Ag/AgBr@m‐WO₃. For the material synthesis, highly ordered mesoporous‐WO₃ (m‐WO₃) was initially synthesized by sol–gel method and AgBr nanoparticles (NPs) were subsequently introduced in the pores of m‐WO₃, and finally, the Ag nanoparticles were introduced by light irradiation. The enhanced photocatalytic degradation of methylparaben in water is attributed to the formation of surface plasmonic resonance (SPR) due to the introduction of Ag NPs on the surface of the catalyst. Also, the formation of heterojunction between AgBr and mesoporous‐WO₃ in Ag/AgBr@m‐WO₃ significantly inhibited the recombination of light‐induced electron‐hole pairs in the semiconductor composite. The morphological and optical characterizations of the synthesized photocatalysts (Ag/AgBr@m‐WO₃) were carried out using SEM, TEM, XDR, N₂ adsorption–desorption, UV‐VIS diffuse reflectance spectroscopy (DRS). Also, the photocatalytic studies using radical scavengers were carried out and the results indicated that ${\text{O}}_2^{·-}$ is the main reactive species.     

AgBr/TiO_2异质结型复合可见光催化剂的制备及其光催化活性

以钛酸四丁酯、KBr、AgNO3为前体,合成了具有异质结结构的纳米AgBr/Ti O2复合可见光催化剂.利用XRD、TEM、HRTEM和UV-Vis等方法对催化剂的晶相组成、形貌、粒度、微观结构、吸光性能等进行了表征.光催化降解亚甲基蓝活性结果表明,复合与单组分催化剂的光催化活性顺序为:AgBr/Ti O2AgBrAg-Br/P25P25Ti O2.含光敏剂AgBr的复合及单组份催化剂由于具有对可见光的良好吸收性能而具有较高的光催化活性.对于AgBr/Ti O2光催化剂,随mAgNO3/mTi O2比的增加,光催化活性先增强后减弱,当mAgNO3/mTi O2=3.35时光催化活性最高,分析结果表明,该复合催化剂粒径约15 nm,分散均匀且形成了紧密接触的AgBr/Ti O2异质结微结构,在紫外可见区(250～800 nm)都具有最强的光吸收.     

Visible light photocatalytic activity of BiVO4 particles with different morphologies

Bismuth vanadate (BiVO₄) particles with different morphologies were synthesized by a one-step hydrothermal process and their optical and photocatalytic properties were investigated. Their crystal structure and microstructures were characterized using X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM). XRD patterns demonstrate that the as-prepared samples are monoclinic cell. FESEM shows that BiVO₄ crystals can be fabricated in different morphologies by simply manipulating the reaction parameters of hydrothermal process. The UV–visible diffuse reflectance spectra (UV–vis DRS) reveal that the band gaps of BiVO₄ photocatalysts are about 2.07–2.21 eV. The as-prepared BiVO₄ photocatalysts exhibit higher photocatalytic activities in the degradation of rhodamine B (Rh B) under visible light irradiation (λ > 420 nm) compared with traditional N-doped TiO₂ (N-TiO₂). Furthermore, wheat like BiVO₄ sample reveals the highest photocatalytic activity. Up to 100% Rh B is decolorized after visible light irradiation for 180 min. The reason for the difference in the photocatalytic activities for BiVO₄ samples obtained at different conditions were systematically studied based on their shape, size and the variation of local structure.     

具有表面等离子体效应的Ag-AgBr/Al2O3光催化性能研究

以介孔γ-Al2O3为载体,通过化学沉积与光还原法制备了Ag-AgBr/Al2O3等离子体诱导可见光催化材料。采用SEM、TEM、XRD及UV-Vis吸收光谱对复合材料进行结构与性能表征,并通过降解亚甲基蓝溶液对其光催化性能进行考察。研究结果表明,在可见光下照射1 h,催化材料对5 mg/L亚甲基蓝溶液的降解率达95%以上,总有机碳去除率为70%。由于表面金属的等离子体共振效应和介孔材料的吸附性能,催化剂具有很高的可见光催化活性和良好的稳定性,在开发新型等离子体诱导可见光催化剂方面应用前景广阔。     

Synthesis,characterization and photocatalytic performance of W,N, S-tri-doped TiO2 under visible light irradiation

W–S–N-tri-doped TiO₂ photocatalysts (WSNTiO₂) were prepared by a simple sol–gel method. Tungstic acid, sodium sulfate and urea were used as tungsten, sulfur and nitrogen sources, respectively. The morphology and microstructure characteristics of the photocatalysts were evidenced by means of XRD, BET, TEM, SEM and UV–vis DRS techniques. The XRD results show that the main crystal phase of samples is anatase. It was also found that the tri-doping of TiO₂ increases its BET specific surface area from 95 to 121 m²·g⁻¹. Besides, it was shown that tri-doping narrows the band gap of TiO₂ effectively, which has greatly improved the photocatalytic activity in the visible light region. The photocatalytic activity of tri-doped TiO₂ powders was compared to that of bi-doped ones through the degradation of Congo Red (CR) under visible irradiation. Thus, the prepared 0.5% W–N–S–TiO₂ heat treated at 450 °C showed the best photocatalytic activity compared to the prepared pure TiO₂, Degussa P25, and co-doped samples (WNTiO₂ and WSTiO₂). In particular, a Congo Red degradation rate of approximately 99% was reached after only 35 min of visible light irradiation in the presence of 0.5% of WNSTiO₂. Total organic carbon (TOC) removal of CR was up to 72% and confirmed its significant mineralization in the presence of 0.5% of WNSTiO₂ photocatalyst.     

Photocatalytic performance of BiFeO3 based on MOFs precursor

BiFeO₃ (BFO) is considered to be a potential visible light photocatalytic material for organic degradation due to its narrow band gap. In this work, the BFO with smaller band gap and better photocatalytic performance was prepared by thermal decomposition of we prepared smaller band gap and better photocatalytic performance BFO by thermal decomposition of MOFs precursor Bi[Fe (CN)₆]·5H₂O. Among them, BFO‐0.5 has the best photocatalytic activity, which the photocatalytic degradation rate of methyl orange (MO) aqueous solution is 98.1% within 60 minutes. The photocatalytic activity is almost unchanged after four cycles of use. The enhanced photocatalytic activity of BFO could be attributed to the enhanced optical absorption and smaller particles. It may be conducive to design more efficient photocatalysts for photocatalytic degradation of organic dyes.     

Facile ion-exchange synthesis of Gd-doped K2Ta2O6 photocatalysts with enhanced visible light activity

One of the well-known ways of increasing the visible light absorption capability of semiconducting materials is cation doping. This study aims to use Gd doping to tailor the bandgap energy of K₂Ta₂O₆ (KTO) for photocatalytic degradation of organic pollutants under visible light irradiation. Accordingly, the parent KTO and Gd-doped KTO with different Gd concentrations (K_2-3xGd_xTa₂O₆; x = 0.025, 0.05, 0.075 and 0.1 mol%) were synthesized by hydrothermal and facile ion-exchange methods, respectively. The powder XRD, FT-IR, SEM-EDS, TEM-SAED, N₂ adsorption-desorption, XPS, UV–Vis DRS, PL and ESR techniques were used to investigate the effect of Gd dopant concentration on the structural and photocatalytic properties of KTO. The photocatalytic activity of these samples was investigated for the photocatalytic degradation of methylene blue (MB) dye in an aqueous solution at room temperature under visible light irradiation. The experimental results show that all Gd-doped KTO samples exhibit enhanced photocatalytic activity compared with parent KTO toward MB degradation. In particular, Gd-KTO obtained by doping of 0.075 mol% shows the highest photocatalytic activity among the Gd-doped samples and the degradation efficiency of MB was 79% after 180 min of visible light irradiation, which is approximately 1.5 times as high as that by parent KTO (53%). In addition, trapping experiments and electron spin resonance (ESR) analysis demonstrated that the hydroxyl radicals (^?OH) have played a crucial role in the photocatalytic degradation of MB. The reusability and stability of Gd doped-KTO with a Gd content of 0.075 mol% against MB degradation were examined for five cycles. Based on the present study results, a visible light induced photocatalytic mechanism has been proposed for Gd0075-KTO sample.     

具有主导晶面的BiOIO3/BiOCl异质结制备与光催化性能

分别以乙二醇/去离子水为溶剂,通过溶剂热/水热法分别制备了具有不同主导晶面的BiOIO₃/{110}BiOCl和BiOIO₃/{001}BiOCl异质结。采用X射线衍射、扫描电子显微镜、能量色散谱和紫外可见漫反射光谱对制备的BiOIO₃/BiOCl光催化剂进行了表征。在可见光照射下,通过对罗丹明B和苯酚水溶液的光催化降解,考察了BiOIO₃/BiOCl异质结的光催化活性。结果显示25%BiOIO₃/{110}BiOCl异质结具有最高的光催化效率。BiOIO₃/{110}BiOCl较好的光催化性能是由于其在可见光区较强的光吸收,以及异质结结构和BiOCl所具有的(110)主导晶面有利于光生载流子的分离。超氧自由基(·O₂^-)和空穴(h⁺)是光催化过程中的主要活性物质。此外,根据实验结果探讨了光催化性能增强的机理。     

Synthesis and characterization of ZnO-doped cupric oxides and evaluation of their photocatalytic performance under visible light

ZnO–CuO binary oxide photocatalysts were synthesized by the liquid phase coprecipitation method. The catalysts were characterized by X-ray diffraction, transmission electron microscopy and UV–vis spectroscopy. The photocatalytic activity of the ZnO–CuO nanocomposites was estimated on the basis of decoloration of methyl orange dye under visible light. The effects of parameters such as calcining temperature, amount of catalyst and pH on the photocatalytic degradation efficiency of methyl orange solutions were investigated in detail. The maximum photocatalytic activity was obtained on ZnO–CuO nanocomposites with a calcining temperature of 350 °C, using a catalyst amount of 0.056 g/L and a pH of 7.5. The visible light-driven capability of ZnO–CuO nanocomposites is much better than that of commercially available TiO₂ photocatalysts under comparable conditions.     

Improved Photodegradation of Organic Contaminants Using Nano‐TiO2 and TiO2–SiO2 Deposited on Portland Cement Concrete Blocks

The photocatalytic activity of TiO₂ nanoparticles (nano‐TiO₂) and its hybrid with SiO₂ (nano‐TiO₂–SiO₂) for degradation of some organic dyes on cementitious materials was studied in this work. Nanohybrid photocatalysts were prepared using an inorganic sol–gel precursor and then characterized using XRD, SEM and UV–Vis. The grain sizes were estimated by Scherrer's equation to be around 10 nm. Then, a thin layer was applied to Portland cement concrete (PCC) blocks by dipping them into nano‐TiO₂ and nano‐TiO₂–SiO₂ solution. The efficiency of coated PCC blocks for the photocatalytic decomposition of two dyes, Malachite Green oxalate (MG) and Methylene Blue (MB), was examined under UV and visible irradiation and then monitored by the chemical oxygen demand tests. The results showed that more than 80% and 92% of MG and MB were decomposed under UV–Vis irradiation using blocks coated with nano‐TiO₂–SiO₂. TiO₂/PCC and TiO₂–SiO₂/PCC blocks showed a significant ability to oxidize dyes under visible and UV lights and TiO₂–SiO₂/PCC blocks require less time for dye degradation. Based on these results, coated blocks have increased photocatalytic activity which can make them commercially accessible photocatalysts.     

Highly Efficient Photocatalytic Remediation of Simulated Polycyclic Aromatic Hydrocarbons (PAHs) Contaminated Wastewater under Visible Light Irradiation by Graphene Oxide Enwrapped Ag3PO4 Composite.

Effective removal of polycyclic aromatic hydrocarbons (PAHs) from wastewater before their discharge into the environment is an ever pressing requirement. In this study, for the first time, simulated PAHs contaminated wastewater was photocatalytically remediated with graphene oxide (GO) enwrapped silver phosphate as visible light‐driven photocatalysts. The GO/Ag₃PO₄ photocatalysts exhibited superior photocatalytic activity and stability compared with pure Ag₃PO₄, g‐C₃N₄ and TiO₂ (P25). The degradation efficiency of naphthalene, phenanthrene and pyrene could reach 49.7%, 100.0% and 77.9%, rspectively within 5 min irradiation. The apparent rate constants of photocatalytic degradation of 3 wt% GO/Ag₃PO₄ composite photocatalyst were 0.14, 1.21 and 2.46 min⁻¹ for naphthalene, phenanthrene and pyrene, respectively. They were about 1.8, 1.5 and 2.0 times higher than that of pure Ag₃PO₄, and much higher than that of g‐C₃N₄ and TiO₂. Meanwhile, the efficiencies of 44.6%, 95.2% and 83.8% were achieved for naphthalene, phenanthrene and pyrene degradation even after 5 times of recycling in the GO/Ag₃PO₄‐PAHs photocatalysis system. Reactive species of ∙O₂⁻ and h⁺ were considered as the main participants for oxidizing naphthalene, phenanthrene and pyrene.