Ce助剂对V/SiO2催化CO2氧化乙苯脱氢性能的影响

通过N₂吸附、X射线衍射(XRD)、X射线光电子能谱(XPS)、H₂程序升温还原(H₂-TPR)、CO₂程序升温脱附(CO₂-TPD)和热重分析(TGA)等多种表征手段和催化反应性能评价,研究了铈助剂的添加对V/SiO₂催化CO₂氧化乙苯脱氢性能的影响. 结果表明,Ce助剂不仅提高了催化剂活性组分分散性和氧化还原性能,抑制了钒物种的深度还原,而且增强了催化剂碱性和CO₂吸附能力,减缓了积炭生成,从而显著提高了V-Ce/SiO₂对CO₂氧化乙苯脱氢反应的催化活性和稳定性. 在本实验中,V(0.8)-Ce(0.25)/SiO₂催化剂表现出最佳的催化性能,苯乙烯(ST)收率可达55.6%,选择性为98.5%,反应12 h 后,催化剂活性基本不变,与惰性N₂气氛比较,CO₂明显促进了乙苯脱氢反应,归因于CO₂能保持催化剂表面钒物种的高价态.     

Distribution and properties of catalytically active Cu2+ sites in mesoporous MCM-41 modified with Al, Zr, or W ions

The surface of pure mesoporous SiO₂ with an MCM-41 structure has been modified by introducing Al, Zr, or W ions (1 mmol/g). The original and modified materials have been loaded with Cu²⁺ ions. The distribution, properties, and thermal stability of different Cu²⁺ sites have been studied by EPR and IR spectroscopy. The resulting catalysts have been tested for activity in ethane oxidation. The modification of original MCM-41 exerts a very strong effect on the stability of isolated Cu²⁺ ions on the support surface. Among the modified supports, Al-MCM-41 affords the highest thermal stability and degree of dispersion (70–80%) of the copper-containing phase. There is no correlation between the total number of surface Cu²⁺ sites and the catalytic activity. The specific catalytic activity (per Cu²⁺ ion accessible to the reactants) depends strongly on the local structure of the sites. The isolated pentacoordinated Cu²⁺ sites stabilized by the Al-MCM-41 surface show a comparatively high activity in the sample calcined at 520°C. The heat treatment of Cu/Al-MCM-41 at 650–750°C reduces the specific activity of the catalytic sites by a factor of ～20 without sintering the copper phase, as in the case of CuHZSM-5 zeolite. The least dispersed copper phase, which is observed in the original MCM-41 and likely consists of aggregates of weakly interacting Cu²⁺ ions, exhibits the highest specific activity and thermal stability. In the case of Cu/W-MCM-41, heat treatment causes both the sintering of copper particles and a decrease in the specific activity of the surface Cu²⁺ ions.     

Surface characterization and catalytic evaluation of copper-promoted Al-MCM-41 toward hydroxylation of phenol

The Mobil Composition of Matter No. 41 (MCM-41) containing Cu and Al with Si/Al ratios varying from 100 to 10 and 1 to 6 wt.% of Cu was synthesized under hydrothermal and impregnation conditions, respectively. The samples were characterized by nitrogen adsorption–desorption measurements, X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), UV–Vis diffuse reflectance spectroscopy (UV–Vis DRS), temperature-programmed reduction (TPR), temperature-programmed desorption (TPD), and ²⁹Si and ²⁷Al magic-angle spinning–nuclear magnetic resonance (MAS–NMR) spectra. X-ray diffraction patterns indicate that the modified materials retain the standard MCM-41 structure. TPR patterns show the two-step reduction of Cu species. TPD study shows that Cu-impregnated Al-MCM-41 samples are more acidic than Al-MCM-41. From the MAS–NMR it was confirmed that most of the Al atoms are present tetrahedrally within the framework and some are present octahedrally in extraframework position. Impregnation of Cu shifted Al to the extraframework position. The catalytic activity of the samples toward hydroxylation of phenol in aqueous medium was evaluated using H₂O₂ as the oxidant at 80 °C. The effects of reaction parameters such as temperature, catalyst amount, amount of H₂O₂, and solvent were also investigated. Sample containing 4 wt.% copper-loaded Al-MCM-41-100 showed high phenol conversion (78%) with 68% catechol and 32% hydroquinone selectivity.     

An imidazolium ionic liquid having covalently attached an oxime carbapalladacycle complex as ionophilic heterogeneous catalysts for the Heck and Suzuki-Miyaura cross-coupling

An oxime carbapalladacycle, analogous to that used as catalyst in homogeneous phase, has been derivatized to increase its ionophilicity by introducing an imidazolium group covalently attached through a chain at the complex. The resulting complex is soluble in 1-butyl-3-methylimidazolium ionic liquid (bmimPF₆) and not extractable by ether. The catalytic activity of this palladium complex in bmimPF₆ is, however, unsatisfactory and only increases marginally in bmimPF₆/supercritical CO₂. This limitation has been overcome by supporting this imidazolium palladium complex on high surface area Al/MCM-41 aluminosilicate, whereby a solid active catalyst for the Suzuki cross-coupling has been obtained. Reusability and stability over reuse for this Al/MCM-41-supported catalyst have been studied.     

Preparation of MnCo/MCM-41 catalysts with high performance for chlorobenzene combustion

MCM-41 was synthesized by a soft template technique. The specific surface area and pore volume of the MCM-41 were 805.9 m²/g and 0.795 cm³/g, respectively. MCM-41-supported manganese and cobalt oxide catalysts were prepared by an impregnation method. The energy dispersive X-ray spectroscopy clearly confirmed the existence of Mn, Co, and O, which indicated the successful loading of the active components on the surface of MCM-41. The structure and function of the catalysts were changed by modulating the molar ratio of manganese to cobalt. The 10%MnCo(6:1)/MCM-41 (Mn/Co molar ratio is 6:1) catalyst displayed the best catalytic activity according to the activity evaluation experiments, and chlorobenzene (1000 ppm) was totally decomposed at 270 °C. The high activity correlated with a high dispersion of the oxides and was attributed to the exposure of more active sites, which was demonstrated by X-ray diffraction and high-resolution transmission electron microscopy. The strong interactions between MnO₂, Co₃O₄, MnCoO_x, and MCM-41 indicated that cobalt promoted the redox cycles of the manganese system. The bimetal-oxide-based catalyst showed better catalytic activity than that of the single metal oxide catalysts, which was further confirmed by H₂ temperature-programmed reduction. Chlorobenzene temperature-programmed desorption results showed that 10%MnCo(6:1)/MCM-41 had higher adsorption strength for chlorobenzene than that of single metal catalysts. And stronger adsorption was beneficial for combustion of chlorobenzene. Furthermore, 10%MnCo(6:1)/MCM-41 was not deactivated during a continuous reaction for 1000 h at 260 °C and displayed good resistance to water and benzene, which indicated that the catalyst could be used in a wide range of applications.     

固载于 Al-MCM-41 纳米孔道中的钒离子催化氧化烷基芳基硫化物

 VOSO₄ immobilized within nanoreactors of Al-MCM-41 (VO²⁺/Al-MCM-41) was synthesized and characterized by X-ray diffraction, Fourier transform infrared spectroscopy, nitrogen adsorption-desorption, and chemical analysis techniques. The prepared VO²⁺/Al-MCM-41 successfully catalyzes the oxidation of aryl alkyl sulfides and up to 99% conversion and 90% selectivity for the corresponding sulfoxides were obtained with H₂O₂ as oxidant in acetonitrile at room temperature in 30 min.     

ClO<Stack><Subscript>4</Subscript><Superscript>−</Superscript></Stack>/Al-MCM-41 nanoparticles as a solid acid catalyst for the synthesis of 2-amino-3-cyanopyridines

A one-pot four-component reaction of various types of aldehydes, acetophenone, malononitrile, and ammonium acetate was studied in the presence of perchlorated Al-MCM-41 (ClO ₄ ^? /Al-MCM-41) nanoparticles for the synthesis of 2-amino-3-cyanopyridines. Mesoporous Al-MCM-41 molecular sieves with the Si/Al molar ratios of 30, 40, and 50 were synthesized by the sol–gel method and ClO ₄ ^? /Al-MCM-41 with different calcination temperatures were prepared and characterized by SEM, TEM, XRD, FT-IR, potentiometric titration and, N₂ adsorption-desorption techniques. The characterization results show that ClO ₄ ^? /Al-MCM-41 with calcination temperature of 300 °C has the best catalytic activity for the synthesis of 2-amino-3-cyanopyridines. The catalyst is reusable many times with moderate loss in its activity.     

Epoxidation of cyclooctene using soluble or MCM-41-supported molybdenum tetracarbonyl-pyridylimine complexes as catalyst precursors

The ligand N-(n-propyl)-2-pyridylmethanimine (pyim) and an immobilised analogue of this ligand (MCM-41-pyim) were prepared by the condensation reaction of 2-pyridinecarboxaldehyde with either propylamine or aminopropyl groups covalently attached to the ordered mesoporous silica MCM-41. Free and immobilised tetracarbonyl complexes of the type cis-[Mo(CO)₄(L)] (L = pyim (1), MCM-41-pyim) were then prepared by microwave-assisted heating of a mixture of Mo(CO)₆ and the organic ligand or ligand-silica in toluene at 110 °C for 30-45 min. The products were characterised by NMR spectroscopy (¹H, ¹³C and ²⁹Si, in solution and in the solid state), elemental analysis, N₂ adsorption, and FT-IR spectroscopy. When used as catalyst precursors for the epoxidation of cis-cyclooctene by tert-butylhydroperoxide at 55 °C (1 mol% catalyst (Mo), no additional co-solvent), 1,2-epoxy-cyclooctane was obtained as the only reaction product in quantitative yield after 5 h for 1 and 36% yield after 24 h for the supported complex. The use of the ionic liquid (IL) 1-butyl-3-methylimidazolium tetrafluoroborate as co-solvent led to lower catalytic activities (epoxide selectivity was always 100%) but allowed the catalyst/IL mixtures (homogeneous mixture for IL+1 and a biphasic solid + IL system for IL+MCM-41-pyim/Mo) to be easily recovered and reused in subsequent runs without loss of catalytic performance.     

一种无机-有机高分子杂化催化剂Pd(0)-CS/MCM-41的制备及其性能研究

将天然高分子聚合物壳聚糖负载到MCM-41介孔分子筛上,再在室温与氯化钯乙醇溶液作用,制得了一种无机-有机天然高分子杂化催化剂Pd(0)-CS/MCM-41,并利用XPS、FTIR、XRD、热重等手段对其进行了表征。以碘代苯与丙烯酸的Heck芳基化反应考察了所得催化剂的催化性能。结果表明,催化剂具有较高的催化活性和良好的重复使用性能,催化剂在氮气保护下能有效地催化碘代苯与丙烯酸的Heck反应,高产率地得到反式肉桂酸。经8次重复使用后,肉桂酸的产率仍达80%以上。     

Liquid-phase synthesis of isopulegol from citronellal using mesoporous molecular sieves mcm-41 and zeolites

Isopulegol (IPG) was synthesized from citronellal (CTN) at atmospheric pressure and 40~60°C in a batch reactor by using mesoporous molecular sieves MCM-41 as well as zeolites HZSM-5 and Hβ. The catalysts were characterized by the methods of XRD, N₂ adsorption, ²⁷Al and ²⁹Si MAS-NMR and TPD of ammonia. Under our reaction conditions, Al-MCM-41 was found to be the best catalyst; it exhibited much higher activity, despite slightly lower IPG selectivity. The catalytic results depend on a variety of factors, viz. the acidity, the pore size and the pore channel of catalysts. The reaction paths were proposed and the kinetic parameters for competitive first order reactions of CTN were estimated. This revised version was published online in June 2006 with corrections to the Cover Date.     

介孔氧化铝负载钒催化剂上丙烷氧化脱氢制丙烯

 采用浸渍法制备了介孔氧化铝 (m-Al2O3) 负载钒催化剂 (V/m-Al2O3), 并考察了其催化丙烷氧化脱氢制丙烯反应活性. 通过 N2 吸附-脱附、透射电镜、X 射线粉末衍射、紫外-可见漫反射光谱、氢-程序升温还原和氨-程序升温脱附对催化剂进行了表征. 结果表明, 介孔氧化铝具有大比表面积、窄孔径分布和两维六方相结构, 在其上负载适量的 V 可实现 V 活性物种的高分散及催化剂的弱酸性, 从而有利于提高丙烷转化率和丙烯选择性. 与共合成法制备的含 V 介孔氧化铝 V/m-Al2O3(C) 和浸渍法制备的 V/?-Al2O3 相比, V/m-Al2O3 表现出更高的催化活性. 这与载体较弱的酸性和较大的比表面积以及 V 物种的高分散有关.     

Cu(II) immobilized on mesoporous organosilica as an efficient and reusable nanocatalyst for one‐pot Biginelli reaction under solvent‐free conditions

Cu(II) immobilized on mesoporous organosilica nanoparticles (Cu²⁺@MSNs‐(CO₂^?)₂) has been synthesized, as a inorganic–organic nanohybrid catalyst, through a post‐grafting approach. Its characterization is carried out by Fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), Energy dispersive X‐ray (EDX), Thermogravimetric/differential thermal analyses (TGA‐DTA), and Nitrogen adsorption–desorption analysis. Cu²⁺@MSNs‐(CO₂^?)₂ exhibits high catalytic activity in the Biginelli reaction for the synthesis of a diverse range of 3, 4‐dihydropyrimidin‐2(1H)‐ones, under mild conditions. The anchored Cu(II) could not leach out from the surface of the mesoporous catalyst during the reaction and it has been reused several times without appreciable loss in its catalytic activity.     

Al-MCM-41 catalyzed three-component Strecker-type synthesis of α-aminonitriles

Mesoporous aluminosilicate (Al-MCM-41) efficiently catalyzed the three-component Strecker-type reaction of benzylacetone and aniline with trimethylsilyl cyanide in CH₂Cl₂ at room temperature to afford the corresponding α-aminonitrile in excellent yields (up to 97%). Mesoporous silica (MCM-41), amorphous SiO₂-Al₂O₃, and H-Y and H-ZSM-5 zeolites also catalyzed this reaction, but gave the desired product in lower yields. The Al-MCM-41 catalyzed three-component Strecker-type reaction was applicable to a wide range of ketones, aldehydes, and amines. Furthermore, the Al-MCM-41 catalyst could be applied to a fixed-bed flow reactor: The desired α-aminonitrile derivative was constantly produced in nearly 80% yields for 48 h.     

Heteropolyacid (H3PW12O40) supported MCM-41: An efficient solid acid catalyst for the green synthesis of xanthenedione derivatives

HPWA/MCM-41 mesoporous molecular sieves of appropriate ratios were prepared by loading HPWA on siliceous MCM-41 by the wet impregnation method. The prepared HPWA/MCM-41 materials were characterized by X-ray diffraction analysis (XRD) and BET surface area and FT-IR measurements. The morphology of mesoporous materials was studied by TEM observation. The catalytic activity of the above materials was tested for the condensation of dimedone (active methylene carbonyl compound) and various aromatic aldehyes under liquid phase conditions at 90 °C. The products were confirmed by FT-IR, ¹H NMR and ¹³C NMR studies. HPWA supported MCM-41 catalysts catalyses efficiently the condensation of dimedone and aromatic aldehydes in ethanol and other solvents under liquid phase conditions to afford the corresponding xanthenedione derivatives. Activities of the catalysts follow the order: HPWA/MCM-41(20 wt.%) > HPWA/MCM-41(30 wt.%) > H₃PW₁₂O₄₀·nH₂O > HPWA/MCM-41(10 wt.%) > HPWA/SiO₂ (20 wt.%) > HM (12) > Hβ (8) > Al-MCM-41 (50). Various advantages associated with these protocols include simple workup procedure, short reaction times, high product yields and easy recovery and reusability of the catalyst.     

丙烷氧化脱氢不同硅基载体负载钒氧化物催化剂的TPSR表征

研究了钒负载不同氧化硅载体(Silica-gel,SBA-15,MCM-41,fumed-SiO2,Nano-SiO2)的丙烷氧化脱氢(ODH)催化剂的结构特征和催化性能,结合催化剂的程序升温表面反应(TPSR)的差热热重质谱(TG-DSC-MS)和原位紫外漫反射光谱(UV-vis DRS)等技术,研究钒在载体上的分散度和晶格氧的反应性。结果表明:负载型钒氧化物催化剂的活性取决于钒在不同硅基载体上的分散度,高度分散的隔离的四配位V5+是丙烷氧化脱氢的活性位。C3H6选择性主要与催化剂的平均孔径相关联,平均孔径越小,产物C3H6越易发生深度氧化。另外,不同氧化硅载体晶格氧与钒的结合强度对C3H6的选择性也产生影响,结合力较弱的V-O-Si中的晶格氧是丙烷氧化脱氢的燃烧位,且燃烧温度随晶格氧与钒、硅结合强度的减小而降低。而与钒结合力较强的V=O和V-O-V中的晶格氧是丙烷氧化脱氢的选择氧化位。硅基载体形貌和结构的不同导致负载型钒氧化物催化剂丙烷氧化脱氢活性和选择性发生差异。     

MCM-41-supported bidentate phosphine palladium(0) complex as an efficient catalyst for the heterogeneous Stille reaction

A Stille coupling reaction of organostannanes with organic halides has been developed in the presence of a catalytic amount of MCM-41-supported bidentate phosphine palladium(0) complex (0.5 mol %) in DMF/H₂O (9:1) under air atmosphere in high yields. This polymeric palladium catalyst exhibits higher activity than Pd(PPh₃)₄ and can be reused at least 10 times without any decrease in activity.     

Synthesis and characterization of mesoporous molecular sieves

In the synthesis of mesoporous molecular sieves of the type MCM-41, different cationactive surfactants and sources of silicon were used. Moreover, Al-MCM-41 samples with different content of aluminium were synthesized. MCM-41 and Al-MCM-41 were synthesized at elevated temperature in stainless-steel autoclaves. Prepared mesoporous molecular sieves were characterized by powder X-ray diffraction (XRD), physical adsorption of nitrogen at the temperature of −197°C, sorption capacity of benzene, and by infrared spectroscopy (FTIR). Acidity was measured for Al-MCM-41 by temperature programmed desorption of ammonia (TPDA) and by FTIR of adsorbed pyridine. Acid catalytic activity of Al-MCM-41 was tested by isomerization of o-xylene. Influence of the synthesis reproducibility, surfactant used, source of silicon, synthesis time, source of aluminium, and Si to Al mole ratio on the properties of mesoporous molecular sieves were evaluated.     

Surface acidity of supported vanadia catalysts

The surface acidity of SiO₂, γ-Al₂O₃ and TiO₂ supported vanadia catalysts has been studied by the microcalorimetry and infrared spectroscopy using ammonia as the probe molecule. The acidity in terms of nature, number and strength was correlated with surface structures of vanadia species in the catalysts, characterized by X-ray diffraction and UV-Vis spectroscopy. It was found that the dispersion and surface structure of vanadia species depend on the nature of supports and loading and affect strongly the surface acidity. On SiO₂, vanadium species is usually in the form of polycrystalline V₂O₅ even for the catalyst with low loading (3%) and these V₂O₅ crystallites exhibit similar amount of Brönsted and Lewis acid sites. The 25%V₂O₅/SiO₂ catalyst possesses substantial amount of V₂O₅ crystallites on the surface with the initial heat of 105 kJ mol^-1 and coverage of about 600 mmol g^-1 for ammonia adsorption. Vanadia can be well dispersed on g-Al₂O₃and TiO₂ to form isolated tetrahedral species and polymeric two-dimensional network. Addition of vanadia on γ-Al₂O₃ results in the change of acidity from that associated with g-Al₂O₃ (mainly Lewis sites) to that associated with vanadia (mainly Brönsted sites) and leads to the decreased acid strength. The 3%V₂O₅/TiO₂ catalyst may have the vanadia structure of incomplete polymeric two-dimensional network that possesses the Ti-O-V-OH groups at edges showing strong Brönsted acidity with the initial heat of about 140 kJ mol^-1 for ammonia adsorption. On the other hand, the 10%V₂O₅/TiO₂ catalyst may have well defined polymeric two-dimensional vanadia network, possessing V-O-V-OH groups that exhibit rather weak Brönsted acidity with the heat of 90 kJ mol^-1 for NH₃ adsorption. V₂O₅ crystallites are formed on the 25%V₂O₅/TiO₂ catalyst, which exhibit the acid properties similar to those for 25%V₂O₅ on SiO₂ and γ-Al₂O₃.     

镍(II)配合物官能化的MCM-41催化分子氧环氧化苯乙烯

制备了镍(II)席夫碱配合物官能化的MCM-41多相催化剂MCM-41-Ni.利用X射线粉末衍射、氮气物理吸附脱附、红外光谱、热重、电感耦合等离子体原子发射光谱、元素分析和透射电镜等方法对催化剂进行了表征.以氧气为氧化剂,MCM-41-Ni在催化环氧化苯乙烯的反应中表现出较高的催化活性;苯乙烯的转化率为95.2%,环氧苯乙烷的选择性为66.7%.系统地研究了反应温度、催化剂用量、溶剂以及反应时间对反应性能的影响.催化剂经过4次循环仍然表现出较好的稳定性和催化活性.     

Catalytic Disproportionation of Methyltrichlorosilane by AL-MCM-41 to Prepare Dichlorodimethylsilane

Abstract

Al-MCM-41 samples with various Si/Al ratios were prepared and then used to disproportionate methyltrichlorosilane (MTS) to produce dichlorodimethylsilane (DMCS). The catalysts were characterized by FT-IR, X-ray powder diffraction (XRD), ²⁷Al magic angle spinning nuclear magnetic resonance (²⁷Al MAS NMR), inductively coupled plasma atomic emission spectroscopy (ICP-AES), and N₂ absorption–desorption. It reveals that all samples show the hexagonal structure of MCM-41 and exhibit large BET surface areas (over 842 m²·g^?1). FT-IR spectra of pyridine adsorption demonstrates that Al-MCM-41 samples have Lewis (L) and Brønsted (B) acidic sites, and the B acidic sites are stable in the temperature ranging from 423 to 623 K. The effects of aluminum content and temperature on the disproportionation reaction were also investigated. The results show that the Al-MCM-41 with the Si/Al ratio of 15:1 exhibits an excellent activity with 100% conversion of MTS and 47% selectivity of DMCS at 623 K under atmospheric pressure.