ClO<Stack><Subscript>4</Subscript><Superscript>−</Superscript></Stack>/Al-MCM-41 nanoparticles as a solid acid catalyst for the synthesis of 2-amino-3-cyanopyridines

A one-pot four-component reaction of various types of aldehydes, acetophenone, malononitrile, and ammonium acetate was studied in the presence of perchlorated Al-MCM-41 (ClO ₄ ^? /Al-MCM-41) nanoparticles for the synthesis of 2-amino-3-cyanopyridines. Mesoporous Al-MCM-41 molecular sieves with the Si/Al molar ratios of 30, 40, and 50 were synthesized by the sol–gel method and ClO ₄ ^? /Al-MCM-41 with different calcination temperatures were prepared and characterized by SEM, TEM, XRD, FT-IR, potentiometric titration and, N₂ adsorption-desorption techniques. The characterization results show that ClO ₄ ^? /Al-MCM-41 with calcination temperature of 300 °C has the best catalytic activity for the synthesis of 2-amino-3-cyanopyridines. The catalyst is reusable many times with moderate loss in its activity.     

Surface characterization and catalytic evaluation of copper-promoted Al-MCM-41 toward hydroxylation of phenol

The Mobil Composition of Matter No. 41 (MCM-41) containing Cu and Al with Si/Al ratios varying from 100 to 10 and 1 to 6 wt.% of Cu was synthesized under hydrothermal and impregnation conditions, respectively. The samples were characterized by nitrogen adsorption–desorption measurements, X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), UV–Vis diffuse reflectance spectroscopy (UV–Vis DRS), temperature-programmed reduction (TPR), temperature-programmed desorption (TPD), and ²⁹Si and ²⁷Al magic-angle spinning–nuclear magnetic resonance (MAS–NMR) spectra. X-ray diffraction patterns indicate that the modified materials retain the standard MCM-41 structure. TPR patterns show the two-step reduction of Cu species. TPD study shows that Cu-impregnated Al-MCM-41 samples are more acidic than Al-MCM-41. From the MAS–NMR it was confirmed that most of the Al atoms are present tetrahedrally within the framework and some are present octahedrally in extraframework position. Impregnation of Cu shifted Al to the extraframework position. The catalytic activity of the samples toward hydroxylation of phenol in aqueous medium was evaluated using H₂O₂ as the oxidant at 80 °C. The effects of reaction parameters such as temperature, catalyst amount, amount of H₂O₂, and solvent were also investigated. Sample containing 4 wt.% copper-loaded Al-MCM-41-100 showed high phenol conversion (78%) with 68% catechol and 32% hydroquinone selectivity.     

Effects of hydrochloric acid treatment on structure characteristics and C<Subscript>2</Subscript>H<Subscript>4</Subscript> adsorption capacities of Ünye bentonite from Turkey: a combined FT-IR,XRD, XRF,TG/DTA and MAS NMR study

In this study, a bentonite sample from Ünye, Turkey was treated with various HCl solutions (0.1, 1.0 and 5.0 M) at 90 °C during 3 and 6 h. X-ray diffraction (XRD), X-ray fluorescence (XRF), differential thermal analysis (DTA), thermogravimetric analysis (TG), Fourier transform infrared (FT-IR), magic angle spinning nuclear magnetic resonance (²⁹Si and ²⁷Al MAS NMR) and surface area measurement methods were employed in order to investigate the structural and thermal changes occurring as a result of the acid activation. The data for the adsorption of C₂H₄ obtained at 273 K and pressures up to 100 kPa correlated with structural properties of the acid treated bentonite samples. With the increase of both concentration of acid solution and treatment time, the specific surface area values and the retentions of C₂H₄ gas of bentonite samples increased. Bentonite treated with 5.0 M HCl for 6 h adsorbed C₂H₄ most effectively.     

Kinetic study of template removal of Al-MCM-41 synthesized at room temperature

The Al-MCM-41 molecular sieve with Si/Al = 20 molar ratio was synthesized at room temperature and characterized by X-ray diffractometry, surface area, thermogravimetry, and infrared spectroscopy. The kinetic study was conducted by Vyazovkin and Ozawa method, in order to verify the activation energy during the Hofmann degradation between 130 and 370 °C, in which most of surfactant removal occurs. The results suggest that the activation energy for template removal is close to 80 kJ mol^?1 lower in Al-MCM-41 synthesized at room temperature, when compared to results obtained for mesopores Al-MCM-41 and MCM-41 synthesized by hydrothermal method. This lower activation energy may be understood as consequence of textural properties, such as higher pore size.     

Reaction of benzaldehyde with various aliphatic glycols in the presence of hydrophobic Al-MCM-41: A convenient synthesis of cyclic acetals

The reaction of benzaldehyde with aliphatic glycols was performed over Al-MCM-41 with various Si/Al ratios. The effects of various parameters like temperature, mole ratio, reaction time and catalyst amount on the formation of acetals were optimized. The mesoporous Al-MCM-41 (Si/Al ratio 36, 57, 81 and 108) were synthesized by hydrothermal method. The synthesized catalysts were characterized by X-ray diffraction (XRD), nitrogen adsorption–desorption isotherm (BET), thermo gravimetric-differential thermal analysis (TGA-DTA) and TEM techniques. The acidity of the catalysts was measured by pyridine adsorption followed by FT-IR analysis. TEM analysis showed that the honeycomb-like regular arrangement of hexagonal pores on the molecular sieves. The highly hydrophobic Al-MCM-41 (108) showed higher activity than the other Si/Al ratios. The activity of the catalysts showed the following order Al-MCM-41 (108) > Al-MCM-41 (81) > Al-MCM-41 (57) > Al-MCM-41 (36). The hydrophobicity and nucleophilicity of the glycols highly influences the conversion of benzaldehyde, it followed the order; hexylene glycol (HG) > propylene glycol (PG) > ethylene glycol (EG). The results showed that mole ratio of 1:3 (aldehyde:glycol) gave higher yield than the other mole ratios.     

Investigation of the physicochemical aspects from natural kaolin to Al-MCM-41 mesoporous materials

Aluminum-containing hexagonally ordered mesoporous silica Al-MCM-41 was synthesized by hydrothermal treatment of leached products produced by pre-grinding and subsequent acid leaching of natural kaolin, without addition of silica or aluminum regents. The resulting Al-MCM-41 had a high surface area of 1041 m(2)/g, a pore volume of 0.97 mL/g, and an average pore diameter of 3.7 nm with narrow pore size distribution centered at 2.7 nm. During the synthesis process of Al-MCM-41 from natural kaolin, the evolutions of chemical environments for Si and Al atoms should be emphasized. Wide angle X-ray diffraction (WAXRD), high-resolution transmission electron micrographs (HRTEMs), solid-state magic-angle-spinning nuclear magnetic resonance (MAS NMR), Fourier transform infrared spectroscopy (FT-IR) were used to trace the variations of chemical structures. Pretreatment of grinding and subsequent acid leaching acted as an important role in the whole synthesis process. NMR spectroscopy showed that Q(3) structure (Si(SiO)(3)(OH)), condensed Q(4) framework structure (Si(SiO)(4)), also the octahedral and tetrahedral Al existed in the leached sample and Al-MCM-41, with higher chemical contents of Q(4) structure and the octahedral Al in final product Al-MCM-41 than those in the leached sample. A possible mechanism for the formation of Al-MCM-41 from natural kaolin was suggested.     

Synthesis and characterization of mesoporous molecular sieves

In the synthesis of mesoporous molecular sieves of the type MCM-41, different cationactive surfactants and sources of silicon were used. Moreover, Al-MCM-41 samples with different content of aluminium were synthesized. MCM-41 and Al-MCM-41 were synthesized at elevated temperature in stainless-steel autoclaves. Prepared mesoporous molecular sieves were characterized by powder X-ray diffraction (XRD), physical adsorption of nitrogen at the temperature of −197°C, sorption capacity of benzene, and by infrared spectroscopy (FTIR). Acidity was measured for Al-MCM-41 by temperature programmed desorption of ammonia (TPDA) and by FTIR of adsorbed pyridine. Acid catalytic activity of Al-MCM-41 was tested by isomerization of o-xylene. Influence of the synthesis reproducibility, surfactant used, source of silicon, synthesis time, source of aluminium, and Si to Al mole ratio on the properties of mesoporous molecular sieves were evaluated.     

Liquid-phase synthesis of isopulegol from citronellal using mesoporous molecular sieves mcm-41 and zeolites

Isopulegol (IPG) was synthesized from citronellal (CTN) at atmospheric pressure and 40~60°C in a batch reactor by using mesoporous molecular sieves MCM-41 as well as zeolites HZSM-5 and Hβ. The catalysts were characterized by the methods of XRD, N₂ adsorption, ²⁷Al and ²⁹Si MAS-NMR and TPD of ammonia. Under our reaction conditions, Al-MCM-41 was found to be the best catalyst; it exhibited much higher activity, despite slightly lower IPG selectivity. The catalytic results depend on a variety of factors, viz. the acidity, the pore size and the pore channel of catalysts. The reaction paths were proposed and the kinetic parameters for competitive first order reactions of CTN were estimated. This revised version was published online in June 2006 with corrections to the Cover Date.     

Magic angle spinning29Si and27Al NMR study of mordenite dealumination

Magic angle spinning²⁹Si NMR presents a rapid qualitative method of assessing the degree of dealumination of sodium mordenite modified by acid leaching and heat treatment. A quantitative determination of the²⁹Si coordination sphere is hampered by the overlap of chemical shift ranges for Si?O?Al and Si?O?H species. MAS²⁷Al NMR indicates the presence of octahedrally coordinated Al in interstitial sites in all treated samples. On treating mordenite samples at high temperatures (～700°C) much of the Al becomes invisible to the NMR experiment because of its location in sites of low symmetry and large quadrupole coupling constant.     

Distribution and properties of catalytically active Cu2+ sites in mesoporous MCM-41 modified with Al, Zr, or W ions

The surface of pure mesoporous SiO₂ with an MCM-41 structure has been modified by introducing Al, Zr, or W ions (1 mmol/g). The original and modified materials have been loaded with Cu²⁺ ions. The distribution, properties, and thermal stability of different Cu²⁺ sites have been studied by EPR and IR spectroscopy. The resulting catalysts have been tested for activity in ethane oxidation. The modification of original MCM-41 exerts a very strong effect on the stability of isolated Cu²⁺ ions on the support surface. Among the modified supports, Al-MCM-41 affords the highest thermal stability and degree of dispersion (70–80%) of the copper-containing phase. There is no correlation between the total number of surface Cu²⁺ sites and the catalytic activity. The specific catalytic activity (per Cu²⁺ ion accessible to the reactants) depends strongly on the local structure of the sites. The isolated pentacoordinated Cu²⁺ sites stabilized by the Al-MCM-41 surface show a comparatively high activity in the sample calcined at 520°C. The heat treatment of Cu/Al-MCM-41 at 650–750°C reduces the specific activity of the catalytic sites by a factor of ～20 without sintering the copper phase, as in the case of CuHZSM-5 zeolite. The least dispersed copper phase, which is observed in the original MCM-41 and likely consists of aggregates of weakly interacting Cu²⁺ ions, exhibits the highest specific activity and thermal stability. In the case of Cu/W-MCM-41, heat treatment causes both the sintering of copper particles and a decrease in the specific activity of the surface Cu²⁺ ions.     

CXN天然沸石的研究 V. 结构超稳化

以离子交换结合控制焙烧的方法分别制得结构超稳化高硅H-STI-I和H-STI-II沸石. EDX, ²⁹Si MAS NMR, ²⁷Al MAS NMR, FT-IR等表征证明, 其骨架硅铝原子比分别为4.43和10.62. 分段程序升温焙烧后的沸石样品经粉末XRD表征表明, 其结构热稳定性达到1000 ℃以上. 结构稳定化沸石呈现反映微孔特性的I型吸附等温线, 吸附孔道完美、开放. 经历过酸处理的H-STI-II沸石, 结构缺陷增多, 其热稳定性、比表面积及孔容积略低于H-STI-I.     

ClO<Subscript>4</Subscript><Superscript>−</Superscript>/Zr-MCM-41 nanoparticles prepared at mild conditions: a novel solid acid catalyst for the synthesis of polyhydroquinolines

One-pot four-component reaction of aldehydes, dimedone, ethyl cyanoacetate or ethyl acetoacetate and ammonium acetate was studied in the presence of perchlorated Zr-MCM-41 (ClO₄ ^?/Zr-MCM-41) nanoparticles for the synthesis of dihydropyridines. Zr-MCM-41 nanoparticles with various molar ratios of Si/Zr were synthesized by sol–gel method under mild conditions, and then ClO₄ ^?/Zr-MCM-41 samples with different calcination temperatures were prepared and characterized by XRD, FT-IR and SEM techniques. The characterization results show the presence of perchlorate in the mesostructure of Zr-MCM-41 and the catalytic performance experiments show that ClO₄ ^?/Zr-MCM-41 with Si/Zr molar ratio of 25 and calcinations temperature of 300 °C has the best catalytic activity. The catalyst can be recovered easily and reused many times with moderate decrease in activity.     

Catalytic activity of H-ZSM-5 and H-ZSM-5/AL-MCM-41 in the conversion of ethanol to gasoline fraction hydrocarbons

H-ZSM-5 (Si/Al = 10.6 and 20) efficiently catalyzes the transformation of ethanol into C₅-C₁₂ gasoline hydrocarbons in 27–33 mass % yield at 320°C and feed rate 20 mmol C₂H₅OH/(gcat·h). Only ethylene is produced on the mesoporous zeolite H-ZSM-5/Al-MCM-41 with 100% ethanol conversion. This discrepancy may be attributed to blockage of the ZSM-5 micropores in the mesoporous zeolite structure.     

高骨架铝含量Al-MCM-41的合成

制备了不同Al含量的Al-MCM-41试样，其中Si/Al比值最小为3，即最高含铝量x~A~l=0.303。X射线粉末衍射(XRD)分析表明样品具有MCM-41的特征结构，氮气吸附研究表明，样品呈现Ⅳ型吸附等温线，具有孔径分布均一的中孔结构。文中还利用^2^7AlMASNMR研究了试样中Al的化学环境，结果表明，即使在高铝含量的情况下，样品中的铝原子仍以四配位结合在MCM-41的硅骨架上，未能检测出骨架外六配位铝的存在。文中还就Al含量对孔结构的影响以及Al-MCM-41形成机理作了讨论。     

Rapid extraction and determination of atrazine and its degradation products from microporous mineral sorbents using microwave-assisted solvent extraction followed by ultra-HPLC-MS/MS

We have evaluated three methods for the extraction of atrazine and six of its degradation products from microporous mineral sorbents. Soxhlet extraction and ultrasonic extraction, which work well on soils and sediments, recover only <15 % of the atrazine from a dealuminated Y zeolite. Closed-vessel microwave-assisted extraction, in contrast, gives much better recoveries. This is attributed to the accelerated mass transfer at elevated temperatures and the displacement by the solvent forced into the mineral micropores under elevated pressures. Under the optimized conditions, the recovery of atrazine from the hydrophilic Y zeolites (Si/Al ratios <8) is almost quantitative, and ～77 % for the more hydrophobic ones. The extraction efficiencies for the degradation products of atrazine in the hydrophilic zeolites (74.1–100 %) are also higher than those in the hydrophobic ones (22.3–44.2 %). The extracted compounds were quantified by a combination of ultra-HPLC and tandem MS and resulted in detection limits between 0.04 and 1.41 mg kg^?1 on a hydrophilic Y zeolite (Si/Al?=?2.55), and of 0.09–2.35 mg kg^?1 on a hydrophobic zeolite (Si/Al?=?15). The method was applied to study the degradation of atrazine sorbed on dealuminated Y zeolites.      

Sol–gel preparation of mesoporous Al2O3–SiO2 glasses: structural evolution monitored by solid state NMR

Glasses along the composition line 0.5Al₂O₃–xSiO₂ (1 ≤ x ≤ 6) were prepared via a novel sol–gel route using tetraethylorthosilicate and aluminum lactate as precursors. The structural evolution from solution to gel to glass is monitored by standard ²⁷Al and ²⁹Si nuclear magnetic resonance (NMR) spectroscopies, revealing important insights about molecular level mechanisms occurring at the various stages of glass formation. Under the experimental conditions reported, silica and alumina precursors undergo homoatomic condensation processes when the gel is heat treated at about 100 and 300 °C, respectively, and only little heteroatomic co-condensation occurs in this temperature range. The latter is promoted only upon elimination of the residual lactate and water ligands upon annealing the gels above 300 °C. Following calcination at 650 °C, mesoporous glasses are obtained, having average pore diameter of about 3 nm and a surface areas near 500 m²/g. Si–O–Al connectivities are detected by ²⁹Si magic angle spinning (MAS)-NMR. ²⁷Al MAS-NMR spectra reveal aluminum in four-, five- and six-coordination. The spectra differ significantly from those of other sol–gel derived Al₂O₃–SiO₂ materials prepared from different precursor routes, suggesting that the lactate route results in a higher degree of compositional homogeneity.     

Microwave synthesis,characterization and catalytic properties of titanium-incorporated ZSM-5 zeolite

Titanium-incorporated ZSM-5 zeolites (Si/Al = 50–200 and Si/Ti = 70) were successfully synthesized in a one-step sol-gel process under microwave irradiation. The characteristics of Ti-ZSM-5 zeolites were investigated using X-ray power diffraction, UV/Vis-DRS, FT-IR spectroscopy and solid-state ²⁷Al-NMR to monitor the physico-chemical properties. Simultaneously, the acidic properties were characterized by the NH₃-TPD profile. The characterization results revealed that the Ti⁴⁺ and Al³⁺ ions were well incorporated into the framework of Ti-ZSM-5 zeolite. The prepared zeolite was moderately active but selective in the dehydration of methanol to dimethyl ether.     

Spectrophotometric Determination of Cadmium(II) Using p,p′‐Dinitro‐SYM‐Diphenylcarbazid in Aqueous Solutions

Abstract

A sensitive and selective spectrophotometric method is proposed for the rapid determination of cadmium(II) using, p,p′‐dinitro‐sym‐diphenylcarbazid, directly in aqueous solution. The reaction between cadmium(II) and p,p′‐dinitro‐sym‐diphenylcarbazid occurs immediately in strong basic media (0.02 N sodium hydroxide solution). The complex shows a maximum of absorption at 630–640 nm, and the absorbance remains stable for at least 24 h. The method allows the cadmium determination over the range 0.5–6.0 µg mL^?1, with a molar absortivity of 2.05×10⁴ L mol^?1 cm^?1 and features a detection limit of 0.13 ppm. The interferences caused by several ions [Ca(II), K(I), Ba(II), Al(III), Pb(II), Zn(II), Cl^?1, NO₃ ^?, SO₄ ^2?], which are present in most of environmental samples, were determined. The validation of the spectrophotometric method was done by recovery test of cadmium(II) in tap water and sea water. The results show that the proposed method has been successfully applied to the determination of cadmium(II) in water samples.     

Water sorption heats on silica-alumina-based composites for interseasonal heat storage

CaCl₂-containing composites have been prepared by depositing the hydrated salt (by incipient wetness impregnation) on three different silica-aluminas with various Si/Al ratios. The surface area and porosity of all the samples were determined by N₂-adsorption at ?196 °C, and their water sorption properties were investigated by thermogravimetry linked to differential scanning calorimetry (TG–DSC) in order to determine the quantity of adsorbed/desorbed water and the related heats. The heat released and the quantity of adsorbed water were found to depend on parameters such as the silica-alumina pore diameters, the Si/Al ratio, and the presence of accessible CaCl₂ active phase. The short-term stability of both supports and composites has been also checked by performing successive hydration–dehydration cycles. The sample with the lower Si/Al ratio provided the highest heat per surface area of material, and the heat released per mol of water increased with the amount of Al₂O₃ present in the samples. The deposition of CaCl₂ positively acted on the quantity of heat released during the water sorption, and the composite with the higher alumina content (75 mass% Al) showed the largest heat released per m² of material (2.4 J m^?2) compared to those containing 25 and 13 mass% Al (1.4 and 1.2 J m^?2, respectively).     

Effect of hydrothermal treatment on the structure, stability and acidity of Al containing MCM-41 and MCM-48 synthesised at room temperature

The effect of hydrothermal treatment of the synthesis gel on the structure, hydrothermal and mechanical stabilities and acidity of MCM-41 and MCM-48 aluminosilicates synthesised at room temperature has been investigated by X-ray diffraction, nitrogen adsorption at 77 K and DRIFTS with pyridine as probe molecule. The influence of the Al content and pore size on the structure of the resulting treated Al-MCM-41 materials has also been studied. For all samples improvement of the structural ordering and increase of the pore size, was observed, with pore wall thickness remaining practically unchanged. For Al-MCM-48 an improvement of the pore size uniformity occurs during the treatment. Only a small loss of pore size uniformity occurred for Al-MCM-41 prepared with hexadecyltrimethylammonium bromide, but with samples prepared with tetra and octadecyltrimethylammonium bromide the treatment generated a bimodal pore size distribution. The pore volume increased (17%) in the case of Al-MCM-48 but decreased (5.5–14%) for Al-MCM-41, suggesting a decrease in surface roughness resulting from increase of the degree of condensation of the pore walls. Both treated and untreated samples presented relatively strong Brønsted sites and increase of the Lewis acidity was found to occur upon treatment. Treated samples were found to be more resistant to refluxing in boiling water and mechanical compaction, which was attributed to more polymerised pore walls, with Al-MCM-41 samples tested demonstrating higher stability than Al-MCM-48. However, the differences in stability of samples prepared with or without hydrothermal treatment were not significant. Both treated and untreated samples presented high hydrothermal stability. Although refluxing in boiling water lead to some loss of structural ordering, only a small decrease of pore volume (3–5.5% for Al-MCM-41 and 8-14% for Al-MCM-48) occurred, with practically no alterations in pore size and wall thickness. Ordered mesopore structure, with narrower pores and thicker walls, was still observed after compression at 590 MPa for most of the samples tested.