颜色可调的高荧光CdTe量子点的水相合成

以亚碲酸钠为碲源,硼氢化钠为还原剂,一步合成了巯基丁二酸(MSA)稳定的CdTe量子点.研究了反应液pH值、镉与碲的摩尔比及镉与巯基丁二酸的摩尔比等实验条件对CdTe量子点体系荧光量子产率的影响,并用荧光光谱、X射线粉末衍射及透射电子显微镜等对其进行了表征.结果表明,CdTe量子点具有闪锌矿结构,形貌呈球状;在pH=1...     

Synthesis of Aqueous CdTe Nanocrystals with High Efficient Blue‐Green Emission of Exciton

As one of the most popular nanocrystals (NCs), aqueous CdTe NCs have very weak green emission under conventional synthesis conditions. In this work, we report the first example of blue‐emitting CdTe NCs directly synthesized in aqueous solution by slowing down the growth rate after nucleation. The key for the synthesis is the optimization of NC growth conditions, namely pH range of 7.5 to 8.5, TGA/Cd ratio of 3.6, Cd/Te ratio of 10, and Te concentration of 2×10^?5 mol/L, to get a slow growth rate after nucleation. The as‐prepared blue‐emitting CdTe NCs have small size (as small as 1.9 nm) and bright emission [with 4% photoluminescence quantum yield (PL QY) at 486 nm and 17% PLQY at 500 nm]. Transmission electron microscopy (TEM) images of the as‐prepared CdTe show monodispersed NCs which exhibit cubic zinc blend structure. Moreover, time‐resolved PL decay and X‐ray photoelectron spectroscopy (XPS) results show the as‐prepared NCs have better surface modification by ligand, which makes these luminescent small CdTe NCs have higher photoluminescence quantum yield, compared with NCs synthesized under conventional conditions.     

One-pot synthesis of CdTe quantum dots using tellurium dioxide as a tellurium source in aqueous solution

A novel route has been developed for the synthesis of l-cysteine (Cys)-capped CdTe quantum dots (QDs) in an aqueous medium. Compared with previous reports, this synthesis was carried out in air atmosphere with one pot by using TeO₂ to replace Te or Al₂Te₃ as tellurium source. The mechanism for the formation of CdTe QDs is elucidated. The influences of various experimental variables on the luminescent properties of the obtained CdTe QDs have been systematically investigated, including refluxing time, pH value, Cd/Cys and Cd/Te molar ratios. Furthermore, the obtained QDs were characterized by Fourier transform infrared spectra, X-ray powder diffraction, and transmission electron microscopy, respectively. The results demonstrate that the obtained QDs have zincblende crystal structure with a sphere-like shape. Under the optimized experimental conditions, green- to yellow-emitting CdTe QDs with a maximum photoluminescence quantum yield of 14.6 % can be obtained.     

Synthesis of Multifunctional Mn‐Doped CdTe/ZnS Core/Shell Quantum Dots

The synthesis of a novel water‐soluble Mn‐doped CdTe/ZnS core‐shell quantum dots using a proposed ultrasonic assistant method and 3‐mercaptopropionic acid (MPA) as stabilizer is descried. To obtain a high luminescent intensity, post‐preparative treatments, including the pH value, reaction temperature, reflux time and atmosphere, have been investigated. For an excellent fluorescence of Mn‐doped CdTe/ZnS, the optimal conditions were pH 11, reflux temperature 100°C and reflux time 3 h under N₂ atmosphere. While for phosphorescent Mn‐doped CdTe/ZnS QDs, the synthesis at pH 11, reflux temperature 100°C and reflux time 3 h under air atmosphere gave the best strong phosphorescence. The characterizations of Mn‐doped CdTe/ZnS QDs were also identified using AFM, IR, powder XRD and thermogravimetric analysis. The data indicated that the photochemical stability and the photoluminescence of CdTe QDs are greatly enhanced by the outer inorganic ZnS shell, and the doping Mn²⁺ ions in the as‐prepared quantum dots contribute to strong luminescence. The strong luminescence of Mn‐doped CdTe/ZnS QDs reflected that Mn ions act as recombination centers for the excited electron‐hole pairs, attributing to the transition from the triplet state (⁴T₁) to the ground state (⁶A₁) of the Mn²⁺ ions. All the experiments demonstrated that the surface states played important roles in the optical properties of Mn‐doped CdTe/ZnS core‐shell quantum dots.     

水合肼还原二氧化碲水相合成CdTe量子点

以巯基乙酸为稳定剂, 氯化镉为镉源, 二氧化碲为碲源, 水合肼为还原剂, 一步合成了CdTe量子点. 研究了反应时间、 碲与镉的摩尔比及巯基乙酸与镉的摩尔比等实验条件对CdTe量子点生长过程的影响. 采用荧光光谱、 X射线粉末衍射和透射电子显微镜等对量子点的性能进行了表征. 结果表明, 反应时间及反应物的相对用量对量子点的生长和荧光光谱有明显影响, 所得CdTe量子点具有立方晶型, 发光颜色从绿色到红色连续可调, 荧光量子产率可达26%.     

Stable Water‐dispersed CdTe Nanocrystals Dependent on Stoichiometric Ratio of Cd to Te Precursor

The improved properties of CdTe nanocrystals (NCs) synthesized by hydrothermal method were introduced. The experimental results indicated that the NCs properties could be dramatically influenced by means of changing Cd‐to‐Te molar ratio (the molar ratio of CdCl₂ and NaHTe in the precursor) of the MPA‐capped CdTe NCs. With the increase of the ratio from 2:1 to 10:1, the formation time of near‐infrared‐emitting CdTe NCs was shortened. In particular, high Cd‐to‐Te molar ratio brought about MPA‐capped CdTe NCs of superior radical oxidation‐resistance and photostability. As a result, the optimum ratio was found to be 8:1 or 10:1 in the study in order to efficiently attain stable, water‐dispersed CdTe NCs.     

具有光谱可调、高量子产率和稳定性的水溶性CdTe/Cd(OH)2核壳结构纳米粒子的可控水相合成

建立了一种简便的、以易得的无机盐为反应前体的水相法制备水溶性、高量子产率以及良好稳定性的CdTe/Cd(OH)2核壳结构量子点。本方法可以通过控制Cd(OH)2 壳层结构的厚度,使不同粒径量子点的荧光发射光谱由蓝绿色渐变到橙红色。利用透射电镜、X射线粉末衍射光谱、荧光光谱以及紫外可见光谱对该CdTe/Cd(OH)2核壳结构量子点进行了表征。CdTe/Cd(OH)2核壳结构量子点所具备的良好的水溶性可望应用于生物标记。本方法简便、反应条件温和并且容易操作,为无机金属化物包覆量子点提供了一种简便的途径。     

一锅合成绿色到近红外发射的CdTe量子点

以3-巯基丙酸(MPA)为稳定剂,采用水相合成法制备了从绿色到近红外发射的CdTe量子点。系统研究了反应液pH值、镉和碲的物质的量之比及镉和3-巯基丙酸的物质的量之比等实验条件对CdTe量子点体系的发射波长和荧光量子产率的影响。在pH值为10.5,且nCd2+∶nTe2-∶nMPA=1∶0.05∶1.1的条件下,回流0.5 h,CdTe量子点体系在569 nm波长处的荧光量子产率达到30.8%;在7 h的回流时间内,制备的量子点的波长覆盖范围为525～730 nm。分别用X射线粉末衍射、透射电镜和红外光谱对CdTe量子点的晶体结构、形貌及表面基团进行表征。     

PAMAM树形分子模板法原位合成发紫光CdS量子点的研究

半导体纳米粒子由于具有明显的量子尺寸效应,被形象地称为量子点(quantum dots)。量子点的发射波长可以通过改变粒子尺寸进行调节,并且由于是多电子体系发光,其荧光寿命较长,量子产率和光学稳定性能均优于荧光染料,可望成为新一代的发光材料和荧光探针[1,2]。为此,制备尺寸可控、荧光量子产率高、水溶性的半导体量子点成为很多科研人员的研究目标。树形分子科学的发展,为纳米材料的合成开辟了一条崭新的道路。人们利用树形分子独特的结构特征,将其作为纳米反应器和纳米容器,合成了尺寸均匀、分散性好的Ag、Cu、Pt、Pd等纳米簇[3￣7]。1998…     

Application of CdTe/ZnSe Quantum Dots in In Vitro Imaging of Chicken Tissue and Embryo

The present work is aimed to synthesize CdTe/ZnSe core/shell quantum dots (QDs) in an easy way and to explore the possibilities of its application in in vitro imaging of chicken tissue and embryo. The QDs were prepared using microwave irradiation with different temperatures, which is a very easy and less time‐consuming method. Subsequently, these QDs were characterized by spectrofluorimetry, Transmission Electron Microscopy, X‐ray fluorescence analysis and Dynamic Light Scattering measurement. A blueshifting of the emission was found when ZnSe was deposited on CdTe QDs. The QDs showed its fluorescence emission quantum yields up to 25%. They were applied into chicken embryos and breast muscle tissues to study their efficiency in in vitro imaging. All the QDs of different color were able to visualize in in vitro imaging. The highest fluorescence intensity was detected in the case of red QDs prepared at 100°C. The green and red QDs were possible to detect up to the depth of 3 and 4 mm of the tissue, respectively.     

Surface‐State‐Mediated Charge‐Transfer Dynamics in CdTe/CdSe Core–Shell Quantum Dots

Herein, we report the synthesis of aqueous CdTe/CdSe type‐II core–shell quantum dots (QDs) in which 3‐mercaptopropionic acid is used as the capping agent. The CdTe QDs and CdTe/CdSe core–shell QDs are characterized by X‐ray diffraction (XRD), high‐resolution transmission electron microscopy (HR‐TEM), steady‐state absorption, and emission spectroscopy. A red shift in the steady‐state absorption and emission bands is observed with increasing CdSe shell thickness over CdTe QDs. The XRD pattern indicates that the peaks are shifted to higher angles after growth of the CdSe shell on the CdTe QDs. HR‐TEM images of both CdTe and CdTe/CdSe QDs indicate that the particles are spherical, with a good shape homogeneity, and that the particle size increases by about 2 nm after shell formation. In the time‐resolved emission studies, we observe that the average emission lifetime (τ_av) increases to 23.5 ns for CdTe/CdSe (for the thickest shell) as compared to CdTe QDs (τ_av=12 ns). The twofold increment in the average emission lifetime indicates an efficient charge separation in type‐II CdTe/CdSe core–shell QDs. Transient absorption studies suggest that both the carrier cooling and the charge‐transfer dynamics are affected by the presence of traps in the CdTe QDs and CdTe/CdSe core–shell QDs. Carrier quenching experiments indicate that hole traps strongly affect the carrier cooling dynamics in CdTe/CdSe core–shell QDs.     

Electochemiluminescence of CdTe/CdS Quantum Dots with Triproprylamine as Coreactant in Aqueous Solution at a Lower Potential and Its Application for Highly Sensitive and Selective Detection of Cu2+

Anodic electrochemiluminescence (ECL) of 3‐mercaptopropionic acid (MPA)‐ capped CdTe/CdS core‐shell quantum dots (QDs) with tripropylamine (TPrA) as the co‐reactant were studied in aqueous (Tris buffer) solution for the first time. The results suggest that the oxidation of TPrA at a glassy carbon electrode (GCE) surface participated in the ECL of QDs, and the onset potential and the intensity of ECL of CdTe/CdS QDs were affected seriously by TPrA, as the co‐reactant, in Tris buffer solution. The onset potential of ECL in this new system was about +0.5 V (vs. Ag/AgCl) and the ECL intensity greatly enhanced when TPrA was present. Various influencing factors, such as the electrolyte, pH, QDs concentration, potential range and scan rates on the ECL were studied. Based on the selective quenching by Cu²⁺ to the light emission from CdTe/CdS QDs/TPrA system, a highly sensitive and selective method for the determination of Cu²⁺ was developed. At the optimal conditions, the relative ECL intensity, I₀/I, was proportional to the concentration of Cu²⁺ from 14 nM to 0.21 μM with the detection limit of 6.1 nM based on the signal‐to‐noise ratio of 3. The possible ECL mechanism of QDs and the quenching mechanism of ECL were proposed.     

Ultrafast synthesis of near-infrared-emitting aqueous CdTe/CdS quantum dots with high fluorescence

The traditional aqueous route to synthesis CdTe/CdS Core/shell (c/s) quantum dots (QDs) via decomposition of Cd-thiol complexes is usually time consuming. Herein, an ultrafast and facile aqueous synthetic approach under atmospheric pressure for CdTe/CdS c/s QDs with emission from the green to the near-infrared window (535–820 nm) is reported. With purified CdTe core QDs diluted in solution of Cd-3-mercaptopropionic acid (MPA) complexes, CdTe/CdS c/s QDs with emission wavelengths at 700 and 800 nm can be obtained within 20- and 45-min refluxing under the optimized experimental conditions, respectively. This is the most rapid way to prepare CdTe/CdS c/s QDs in aqueous phase, and the obtained QDs were highly luminescent without postsynthesis treatment. The influences of various experimental factors, including Cd²⁺ concentration, MPA-to-Cd ratio, pH value, and dilution ratio on the growth rate and luminescent properties of the obtained CdTe/CdS c/s QDs, have been taken into consideration. The three processes “purification-dilution-addition” ensure the synthesis environment with high pH value and low core concentration and have a marked impact on the rapid synthesis rate and the resulting high fluorescence of CdTe/CdS c/s QDs.     

基于聚合物多齿配体的高性能CdTe量子点的微波水相合成

针对当前水相合成的量子点(QDs)光性能与稳定性等方面存在的不足,发展了基于聚合物多齿配体的水相制备策略.利用巯基修饰的聚丙烯酸(PAA-SH)作为多齿配体代替常用的巯基丙酸等单齿配体,结合微波辅助加热制备了CdTe量子点,研究了多齿配体对量子点的生长机制与荧光性能的影响.以PAA-SH为配体制备的CdTe量子点荧光性能优异(荧光量子效率(PLQY)可达75%),流体力学直径较小(~10 nm),稳定性也有明显提高.基于聚合物多齿配体的量子点制备技术有助于实现生物医学研究中急需的兼具高亮度、高稳定性、小尺寸等特征的高性能量子点生物探针的制备.     

Versatile Tri(pyrazolyl)phosphanes as Phosphorus Precursors for the Synthesis of Highly Emitting InP/ZnS Quantum Dots

Tri(pyrazolyl)phosphanes ( 5 ^R1,R2) are utilized as an alternative, cheap and low‐toxic phosphorus source for the convenient synthesis of InP/ZnS quantum dots (QDs). From these precursors, remarkably long‐term stable stock solutions (>6 months) of P(OLA)₃ (OLAH=oleylamine) are generated from which the respective pyrazoles are conveniently recovered. P(OLA)₃ acts simultaneously as phosphorus source and reducing agent in the synthesis of highly emitting InP/ZnS core/shell QDs. These QDs are characterized by a spectral range between 530–620 nm and photoluminescence quantum yields (PL QYs) between 51–62 %. A proof‐of‐concept white light‐emitting diode (LED) applying the InP/ZnS QDs as a color‐conversion layer was built to demonstrate their applicability and processibility.     

L-Cys/MPA共修饰CdTe量子点:制备、表征及其在细胞标记中的应用

以L-半胱氨酸(L-Cys)和巯基丙酸(MPA)为共修饰剂在水相中快速合成高质量CdTe量子点.通过紫外-可见分光光谱、荧光光谱、荧光寿命衰减曲线、透射电子显微图片、XRD图谱等相关方法对产物进行表征.调节L-Cys和MPA的摩尔比,对CdTe量子点的生长速率和光学特性有明显影响.结果证实:与单一修饰剂L-Cys或MPA相比,L-Cys/MPA共修饰CdTe量子点具有较快的荧光发射峰红移速率,且其粒径分布均一、稳定性强.50L-CdTe(L-Cys与MPA摩尔比为50%)的荧光量子产率达到66.4%,75L-CdTe(L-Cys与MPA摩尔比为75%)的荧光寿命为46.8 ns.细胞毒性实验证明75L-CdTe量子点对SiHa细胞毒性较小,细胞存活率为75%~95%.进一步将其用于标记细胞,表明75L-CdTe量子点能有效地对SiHa细胞进行荧光标记.L-Cys/MPA共修饰CdTe量子点具有良好的荧光特性和生物相容性,在生物医药领域具有重要的应用价值.     

高质量CdTe量子点的水相快速合成

系统考察了水相合成CdTe量子点的主要影响因素, 通过改变无水乙醇-水体系的体积, 提高NaHTe的合成质量, 并调整反应温度, 改变反应的初始pH值, 在水相中快速合成了量子产率高、粒径分布范围窄的CdTe量子点, 实现了对量子点发光性质的调控, 在最佳条件(无水乙醇3 mL, 水1 mL, 反应初始pH 8.0, 反应温度40 ℃)下, 最高量子产率达68%. 量子点胶体溶液在回流过程中有时产生白色沉淀, 放置7 d后, 未过滤白色沉淀的量子点比过滤后的量子点荧光强度提高15%, 白色沉淀还有减小粒径分布的作用.     

Ligand displacement-induced fluorescence switch of quantum dots for ultrasensitive detection of cadmium ions

This paper reports the construction of a simple CdTe quantum dots (QDs)-based sensor with 1,10-phenanthroline (Phen) as ligand, and the demonstration of a novel ligand displacement-induced fluorescence switch strategy for sensitive and selective detection of Cd²⁺ in aqueous phase. The complexation of Phen at the surface quenches the green photoluminescence (PL) of QDs dominated by a photoinduced hole transfer (PHT) mechanism. In the presence of Cd²⁺, the Phen ligands are readily detached from the surface of CdTe QDs, forming [Cd(Phen)₂(H₂O)₂]²⁺ in solution, and as a consequence the PL of CdTe QDs switches on. The detection limit for Cd²⁺ is defined as ∼0.01 nM, which is far below the maximum Cd²⁺ residue limit of drinking water allowed by the U.S. Environmental Protection Agency (EPA). Two consecutive linear ranges allow a wide determination of Cd²⁺ from 0.02 nM to 0.6 μM. Importantly, this CdTe QDs-based sensor features to distinctly discriminate between Cd²⁺ and Zn²⁺, and succeeds in real water samples. This extremely simple strategy reported here represents an attempt for the development of fluorescent sensors for ultrasensitive chemo/biodetection.     

Luminescent Nanoparticles of Silica‐Encapsulated Cadmium–Tellurium (CdTe) Quantum Dots with a Core–Shell Structure: Preparation and Characterization

Water‐soluble thioglycolic acid (TGA)‐capped CdTe quantum dots (QDs) were synthesized in aqueous medium, and then encapsulated in a silica nanosphere by copolymerization of the TGA‐capped CdTe conjugated with (3‐aminopropyl)triethoxysilane (APS‐CdTe conjugate), free (3‐aminopropyl)triethoxysilane (=3‐(triethoxysilyl)propan‐1‐amine; APS), and tetraethyl orthosilicate (TEOS) in a H₂O‐in‐oil reverse microemulsion consisting of Triton X‐100, octanol, cyclohexane, and H₂O in the presence of aqueous NH₃ solution. The characterizations by transmission electron microscopy (TEM) and luminescence spectroscopy shows that the luminescent nanoparticles are monodisperse, spherical, and uniform in size, ca. 50 nm in diameter with a regular core–shell structure. In addition, primary amino groups directly introduced to the nanoparticle's surface by using free APS in the nanoparticle preparation enable the nanoparticles to be used easier as a biolabel. The effects of pH and metal cations on the luminescence of the nanoparticles also suggest that the new nanoparticles could be useful probes for luminescent sensings of pH and Cu²⁺ ion.     

Photoassisted synthesis of CdSe and core-shell CdSe/CdS quantum dots

This paper describes the synthesis of core-shell CdSe/CdS quantum dots (QDs) in aqueous solution by a simple photoassisted method. CdSe was prepared from cadmium nitrate and 1,1-dimethylselenourea precursors under illumination for up to 3 h using a pulsed Nd:YAG laser at 532 nm. The effects that the temperature and the laser irradiation process have on the synthesis of CdSe were monitored by a series of experiments using the precursors at a Cd:Se concentration ratio of 4. Upon increasing the temperature (80-140 degrees C), the size of the CdSe QDs increases and the time required for reaching a maximum photoluminescence (PL) is shortened. Although the as-prepared CdSe QDs possess greater quantum yields (up to 0.072%) compared to those obtained by microwave heating (0.016%), they still fluoresce only weakly. After passivation of CdSe (prepared at 80 degrees C) by CdS using thioacetamide as the S source (Se:S concentration ratio of 1) at 80 degrees C for 24 h, the quantum yield of the core-shell CdSe/CdS QDs at 603 nm is 2.4%. Under UV irradiation of CdSe/CdS for 24 h using a 100-W Hg-Xe lamp, the maximum quantum yield of the stable QDs is 60% at 589 nm. A small bandwidth (W1/2 < 35 nm) indicates the narrow size distribution of the as-prepared core-shell CdSe/CdS QDs. This simple photoassisted method also allows the preparation of differently sized (3.7-6.3-nm diameters) core-shell CdSe/CdS QDs that emit in a wide range (from green to red) when excited at 480 nm.