Synthesis of CdTe Quantum Dots with Tunable Photoluminescence Using Tellurium Dioxide as Tellurium Source

A simple and convenient method has been developed for synthesis of water‐soluble CdTe quantum dots (QDs) under ambient atmospheric conditions. In contrast to the traditional aqueous synthesis, green to red emitting CdTe QDs were prepared by using TeO₂ to replace Te or Al₂Te₃ as tellurium source in this method. The influences of experimental variables, including pH value, 3‐mercaptopropionic acid (MPA)/Cd and Te/Cd molar ratios, on the emission peak and photoluminescence (PL) quantum yield (QY) of the obtained CdTe QDs have been systematically investigated. Experimental results indicate that green to red emitting CdTe QDs with a maximum photoluminescence quantum yield of 35.4% can be prepared at pH 11.3 and n_(Cd):n_(Te):n_(MPA)=1:0.1:1.7.     

Novel Strategy for Synthesis of High Quality CdTe Nanocrystals in Aqueous Solution

A novel aqueous route for the synthesis of high-quality CdTe nanocrystals（NCs） is presented in this article. With both glutathione（GSH） and cysteine[n（GSH）：n（cysteine）=1：3] as stabilizers, high-quality CdTe NCs with controllable photoluminescence（PL） wavelength from 500 to 630 nm can be prepared within 4 h. As-prepared CdTe NCs show higher photoluminescence quantum yields（PLQY） compared with CdTe NCs prepared via other aqueous methods. When the fluorescent emission peak appeared in orange-red window, the PLQY reaches 70% or above at room temperature without any post-preparative treatment.     

Preparation and Optical Properties of CdTe/CdO-nH2O Core/shell Nano-composites in Aqueous Solution

"The deposition of CdO?nH2O on CdTe nanoparticles was studied in an aqueous phase. The CdTe nanocrystals (NCs) were prepared in aqueous solution through the reaction between Cd2+ and NaHTe in the presence of thioglycolic acid as a stabilizer. The molar ratio of the Cd2+ to Te2- in the precursory solution played an important role in the photoluminescence of the ultimate CdTe NCs. The strongest photoluminescence was obtained under 4.0 of Cd2+/Te2- at pH?8.2. With the optimum dosage of Cd(II) hydrous oxide deposited on the CdTe NCs, the photoluminescence was enhanced greatly. The photoluminescence of these nanocomposites was kept constant in the pH range of 8.0-10.0, but dramatically decreased with an obvious blue-shifted peak while the pH was below 8.0. In addition, the photochemical oxidation of CdTe NCs with cadmium hydrous oxide deposition was markedly inhibited."     

水相中CdTe纳米晶的制备及其光学性质

用不同稳定剂(巯基乙酸(TGA)、巯基丙酸(MPA)、L-半胱氨酸(L-Cys)、3-巯基-1,2-丙二醇(TG))在水相中制备了CdTe纳米晶, 并用透射电子显微镜(TEM)、X射线光电子能谱(XPS)和X射线粉末衍射(XRD)等技术对其进行了表征. 研究了不同水相合成条件对CdTe纳米晶光学性质的影响, 结果表明, n(Cd):n(Te)、溶液pH值、回流时间以及稳定剂的性质, 对纳米晶的光学性质具有显著影响. 制得的CdTe纳米晶发射峰窄且对称(半高全宽达38 nm), 用不同稳定剂制备的纳米晶发光量子效率有所不同, 用不同的激发波长对纳米晶进行激发时, 发射峰并未表现出明显的移动.     

Systematic study of the photoluminescence dependence of thiol-capped CdTe nanocrystals on the reaction conditions

A modified method to prepare high-quality thiol-capped CdTe nanocrystals (NCs) was reported in this paper. The experimental results showed that the different molar ratios of the ligands (thioglycolic acid) to monomers (Cd2+ ions) in the precursor solution played an important role in the photoluminescence (PL) quantum yield (QY) of the as-prepared CdTe NCs. When [ligand]/[monomer] = 1.2, the maximum fluorescent emission peak appeared in the orange-red window, and the PL QY increased up to 50% at room temperature without any postpreparative treatment. In the meantime, suitable reaction conditions were in favor of the optimization of the surface structure of NCs, resulting in the relatively high PL QY from green to red. In addition, some differences between hydrothermal synthesis and traditional aqueous synthesis of CdTe NCs were discussed.     

颜色可调的高荧光CdTe量子点的水相合成

以亚碲酸钠为碲源,硼氢化钠为还原剂,一步合成了巯基丁二酸(MSA)稳定的CdTe量子点.研究了反应液pH值、镉与碲的摩尔比及镉与巯基丁二酸的摩尔比等实验条件对CdTe量子点体系荧光量子产率的影响,并用荧光光谱、X射线粉末衍射及透射电子显微镜等对其进行了表征.结果表明,CdTe量子点具有闪锌矿结构,形貌呈球状;在pH=1...     

Stable Water‐dispersed CdTe Nanocrystals Dependent on Stoichiometric Ratio of Cd to Te Precursor

The improved properties of CdTe nanocrystals (NCs) synthesized by hydrothermal method were introduced. The experimental results indicated that the NCs properties could be dramatically influenced by means of changing Cd‐to‐Te molar ratio (the molar ratio of CdCl₂ and NaHTe in the precursor) of the MPA‐capped CdTe NCs. With the increase of the ratio from 2:1 to 10:1, the formation time of near‐infrared‐emitting CdTe NCs was shortened. In particular, high Cd‐to‐Te molar ratio brought about MPA‐capped CdTe NCs of superior radical oxidation‐resistance and photostability. As a result, the optimum ratio was found to be 8:1 or 10:1 in the study in order to efficiently attain stable, water‐dispersed CdTe NCs.     

巯基乙胺稳定的水溶性CdTe纳米粒子的合成与表征

用巯基乙胺(cysteamine，CA)作为稳定剂，在水相中合成了发光可调的CdTe半导体纳米粒子。这些巯基乙胺稳定的CdTe纳米粒子表面带有大量的正电荷。实验结果表明，稳定剂与Cd的比例以及pH等实验条件对CdTe纳米粒子体系的荧光发射强度影响较大。在pH为6.1时，纳米粒子体系在橙红波段的荧光量子产率达到了9%左右。控制实验条件，合成了各种尺寸的CdTe纳米粒子，荧光发射光谱在520～600 nm范围连续可调。分别用X射线光电子能谱(XPS)，透射电子显微镜(TEM)，X射线衍射仪(XRD)，红外吸收     

一锅合成绿色到近红外发射的CdTe量子点

以3-巯基丙酸(MPA)为稳定剂,采用水相合成法制备了从绿色到近红外发射的CdTe量子点。系统研究了反应液pH值、镉和碲的物质的量之比及镉和3-巯基丙酸的物质的量之比等实验条件对CdTe量子点体系的发射波长和荧光量子产率的影响。在pH值为10.5,且nCd2+∶nTe2-∶nMPA=1∶0.05∶1.1的条件下,回流0.5 h,CdTe量子点体系在569 nm波长处的荧光量子产率达到30.8%;在7 h的回流时间内,制备的量子点的波长覆盖范围为525～730 nm。分别用X射线粉末衍射、透射电镜和红外光谱对CdTe量子点的晶体结构、形貌及表面基团进行表征。     

Synthesis and optical properties of thiol-stabilized PbS nanocrystals

Thiol-capped water-soluble PbS nanocrystals (NCs) stabilized with 1-thioglycerol, dithioglycerol, or a mixture of 1-thioglycerol/dithioglycerol (TGL/DTG) were prepared via one-stage synthesis at room temperature. We found that NCs stabilized with a TGL/DTG mixture show efficient and stable infrared photoluminescence centered in the second "biological window" (1050-1200 nm). Under optimized conditions, full width at half-maximum of the PL emission peak was from 70 to 100 nm. PbS NCs were stable to precipitation and aggregation for the time period from 2 to 3 months when stored in the dark under room temperature. Room-temperature photoluminescence quantum efficiency of NCs was from 7 to 10%. When NCs were stored at 37 degrees C, their PL emission red-shifted, consistent with the NC growth.     

Modification of CdTe quantum dots as temperature-insensitive bioprobes

CdTe quantum dots (QDs) were synthesized in aqueous solution with 3-mercaptopropionic acid (MPA) as the stabilizer. The photoluminescence (PL) of CdTe QDs (3.5nm) is found to be temperature-dependent: as the temperature arising from 278K to 323K, the PL intensity declines to 50.2% of its original and PL emission peak shows obvious red-shift ( approximately 7nm). After modification of the QDs surface with denatured ovalbumin, the PL is more temperature-insensitive than before. The PL intensity retains more than 70% of its original and the emission peak shows less red-shift ( approximately 2nm). Moreover, it is found that the PL intensity and wavelength of denatured ovalbumin coated CdTe QDs are reversible during heating (323K)-cooling (278K) cycles. All the studies provide an important theoretical basis for searching temperature-insensitive bioprobes.     

Silica Coating of Water-Soluble CdTe/CdS Core-Shell Nanocrystals by Microemulsion Method

"Using Te powder as a tellurium source and Na2S as a sulfur source, core-shell CdTe/CdS NPs were synthesized at 50 oC. UV-visible and photoluminescence (PL) spectra were used to probe the effect of CdS passivation on the CdTe quantum dots. As the thickness of CdS shell increases, there is a red-shift in the optical absorption spectra, as well as the PL spectra. The broadening absorption peaks and PL spectra indicate that the size distributions of CdTe/CdS NPs widen increasingly with the increase of CdS coverage. The PL spectra also show that the fluorescence intensity of CdTe QDs will increase when the particles are covered with CdS shell with ratio of S/Te less than 1.0, otherwise it will decrease if the ratio of S/Te is larger than 1.0. Furthermore, the (CdTe/CdS)@SiO2 particles were prepared using a water-in-oil microemulsion method at room temperature in which hydrolysis of tetraethyl orthosilicate leads to the formation of monodispersed silica nanospheres. The obtained (CdTe/CdS)@SiO2 particles show bright photoluminescence with their fluorescence intensity being enhanced 18.5% compared with that of CdTe NPs. TEM imaging shows that the diameter of these composite particles is 50 nm. These nanoparticles are suitable for biomarker applications since they are much smaller than cellular dimensions."     

CdTe/CdSe核壳量子点的合成及其在指纹显现中的应用

以CdCl2和Te粉为原料,在水相中合成了CdTe量子点核;通过外延生长在CdTe量子点核上包覆一层CdSe量子点,得到具有良好荧光性能的CdTe/CdSe核壳量子点;采用X射线衍射仪、透射电镜、高分辨透射电镜分析了不同反应条件下合成的CdTe/CdSe核壳量子点的晶体结构和微观结构,并对其进行了荧光光谱等测试和指纹显现分析.结果表明,合成的CdTe和CdTe/CdSe量子点粒径在3～5nm之间,粒径分布窄,水分散性良好;可以通过控制反应时间和Te/Se比等得到在500～700nm显示荧光发射峰的CdTe/CdSe核壳量子点.此外,核壳CdTe/CdSe量子点可以有效地和指纹物质结合,可应用于对铝合金油潜指纹的鉴别.     

Judicious Choice of N‐Heterocycles for the Realization of Sky‐Blue‐ to Green‐Emitting Carbazolylgold(III) C^C^N Complexes and Their Applications for Organic Light‐Emitting Devices

A new class of sky‐blue‐ to green‐emitting carbazolylgold(III) C^C^N complexes containing pyrazole or benzimidazole moieties has been successfully designed and synthesized. Through the judicious choice of the N‐heterocycles in the cyclometalating ligand and the tailor‐made carbazole moieties, maximum photoluminescence quantum yields of 0.52 and 0.39 have been realized in the green‐ and sky‐blue‐emitting complexes, respectively. Solution‐processed and vacuum‐deposited organic light‐emitting devices (OLEDs) based on the benzimidazole‐containing complexes have been prepared. The sky‐blue‐emitting device shows an emission peaking at 484 nm with a narrow full‐width at half‐maximum of 57 nm (2244 cm^?1), demonstrating the potential of this class of complexes in the application of OLEDs with high color purity. In addition, high maximum external quantum efficiencies of 12.3 % and a long operational half‐lifetime of over 5300 h at 100 cd m^?2 have been achieved in the vacuum‐deposited green‐emitting devices.     

Size‐Tunable Highly Luminescent SiO2 Particles Impregnated with Number‐Adjusted CdTe Nanocrystals

Highly luminescent SiO₂ particles impregnated with CdTe nanocrystals (NCs) are prepared by a sol–gel procedure. Partial ligand exchange from thioglycolic acid to 3‐mercaptopropyltrimethoxysilane (MPS) on the NCs enables retention of the initial photoluminescence (PL) efficiency of the NCs in water, while the simultaneous addition of a poor solvent (ethanol) results in regulated assembly of the NCs through condensation of hydrolyzed MPS. The SiO₂ particles thus prepared have, for example, a diameter of 16 nm and contain three NCs each. The PL efficiency of these particles is 40 %, while the initial efficiency is 46 % in a colloidal solution. The redshift and narrowed spectral width in PL observed after impregnation indicate that the concentration of NCs in these nearly reaches the ultimate value (on the order of 10²¹ particles per liter). The porosity of these particles is investigated by means of N₂ adsorption–desorption isotherms. Due to the SiO₂ shell, these particles have higher stability in phosphate‐buffered saline buffer solution than the initial NCs. Their potential use for labeling in bio‐applications is investigated by conjugating biotinylated immunoglobulin G to them by using streptavidin maleimide as linker. Successful conjugation is confirmed by electrophoresis in agarose gel. This preparation method is an important step towards fabricating intensely emitting biocompatible SiO₂ particles impregnated with semiconductor NCs.     

One-pot noninjection synthesis of Cu-doped Zn(x)Cd(1-x)S nanocrystals with emission color tunable over entire visible spectrum

Unlike Mn doped quantum dots (d-dots), the emission color of Cu dopant in Cu d-dots is dependent on the nature, size, and composition of host nanocrystals (NCs). The tunable Cu dopant emission has been achieved via tuning the particle size of host NCs in previous reports. In this paper, for the first time we doped Cu impurity in Zn(x)Cd(1-x)S alloyed NCs and tuned the dopant emission in the whole visible spectrum via variation of the stoichiometric ratio of Zn/Cd precursors in the host Zn(x)Cd(1-x)S alloyed NCs. A facile noninjection and low cost approach for the synthesis of Cu:Zn(x)Cd(1-x)S d-dots was reported. The optical properties and structure of the obtained Cu:Zn(x)Cd(1-x)S d-dots have been characterized by UV-vis spectroscopy, photoluminescence (PL) spectroscopy, transmission electron microscopy (TEM), and X-ray diffraction (XRD). The influences of various experimental variables, including Zn/Cd ratio, reaction temperature, and Cu dopant concentration, on the optical properties of Cu dopant emission have been systematically investigated. The as-prepared Cu:Zn(x)Cd(1-x)S d-dots did show PL emission but with quite low quantum yield (QY) (typically below 6%). With the deposition of ZnS shell around the Cu:Zn(x)Cd(1-x)S core NCs, the PL QY increased substantially with a maximum value of 65%. More importantly, the high PL QY can be preserved when the initial oil-soluble d-dots were transferred into aqueous media via ligand replacement by mercaptoundeconic acid. In addition, these d-dots have thermal stability up to 250 °C.     

High quantum yield photoluminescence of new polyamides containing oligo‐PPV amino derivatives and related oligomers

The synthesis and the chemical physical characterization of new photoluminescent (PL) chromophores and polymers are reported. Chromophores (oligo‐PPV symmetric derivatives ending with amino groups) are strong blue emitters with a PL quantum yield of ～70% in dioxane solution. They have been used to prepare polyamides by reaction with aliphatic acyl dichlorides in which emitting and non emitting units are alternated. PL properties of the synthesized polyamides have been evaluated in solution and reveal a strong blue emission (PL quantum yield ～60%), To increase the solubility of these systems, oligomers have been purposely prepared and then characterized. They show a peculiar white emission when excited in DMF solution; to get insight into this interesting behavior, asymmetric monoacetylated chromophores have been prepared as model compounds for the chromophoric end groups of the polyamide chains. The emission spectra of these compounds reveal a broad excimeric yellow emission which is responsible, along with the blue emission of the inner chromophoric units, of the overall white emission of the oligomers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2677–2689, 2009     

Synthesis of Black Phosphorus Quantum Dots with High Quantum Yield by Pulsed Laser Ablation for Cell Bioimaging

Black phosphorus quantum dots (BPQDs), with an average diameter of about 6 nm and a height of about 1.1 nm, are successfully synthesized by means of a pulsed laser ablation (PLA) method in isopropyl ether (IPE) solvent. The photoluminescence PL quantum yield of the as‐prepared sample is as high as 20.7 %, which is 3 times that of BPQDs prepared by means of probe ultrasonic exfoliation (approximately 7.2 %). The stable and blue–violet PL emission of the BPQDs is observed. It can be elucidated that electrons transit from the LUMO energy level to the HOMO energy level, as well as energy levels below the HOMO (H1 and H2). In addition, BPQDs are also utilized in bioimaging in HeLa cells, showing an intense and stable PL signal and excellent biocompatibility. Hence, this work indicates that the obtained BPQDs with high quantum yield and stable PL emission have great potential for biomedical applications, including biolabeling, bioimaging, and drug delivery.     

Effect of CdS Interlayer on Properties of CdTe Based Quantum Dots

Highly luminescent thioglycolic acid-capped CdTe-based core/shell quantum dots (QDs) were synthesized through encapsulating CdTe QDs in various inorganic shells including CdS, ZnS and CdZnS. CdTe/CdS core/shell QDs exhibited a significant redshift of emission peaks (a maximum emission peak of 652 nm for the core/shell QDs and 575 nm for CdTe cores) with increasing shell thickness. In contrast, the redshift of photoluminescence (PL) peak wavelength of CdTe/ZnS QDs was less than 15 nm. The PL peak wavelengths of the core/shell QDs depended strongly on core size and shell thickness. The PL quantum yields (QYs) of the CdTe/CdS core/shell QDs are up to 67 % while that of CdTe/ZnS core/shell QDs is 45 %. A composite CdZnS shell made CdTe cores a high PL QY up to 51 % and broadly adjusted PL spectra (a maximum PL peak wavelength of 664 nm). The epitaxial growth of the shell was confirmed by X-ray powder diffraction analysis and luminescence decay experiments. Because of high PL QYs, tunable PL spectra, and low toxicity from a ZnS surface layer, CdTe/CdZnS core/shell QDs will be great potential for bioapplications.     

具有光谱可调、高量子产率和稳定性的水溶性CdTe/Cd(OH)2核壳结构纳米粒子的可控水相合成

建立了一种简便的、以易得的无机盐为反应前体的水相法制备水溶性、高量子产率以及良好稳定性的CdTe/Cd(OH)2核壳结构量子点。本方法可以通过控制Cd(OH)2 壳层结构的厚度,使不同粒径量子点的荧光发射光谱由蓝绿色渐变到橙红色。利用透射电镜、X射线粉末衍射光谱、荧光光谱以及紫外可见光谱对该CdTe/Cd(OH)2核壳结构量子点进行了表征。CdTe/Cd(OH)2核壳结构量子点所具备的良好的水溶性可望应用于生物标记。本方法简便、反应条件温和并且容易操作,为无机金属化物包覆量子点提供了一种简便的途径。