氧化石墨烯对水中内分泌干扰物双酚A的吸附性能

以氧化石墨烯(GO)为吸附剂, 内分泌干扰物双酚A (BPA)为目标污染物, 考察了GO对水中BPA的吸附性能. 结果表明: GO对BPA的最大吸附量(q_m)约为87.80 mg·g^-1 (25℃), 30 min左右即可达到吸附平衡, 远快于活性碳; 吸附动力学和等温线数据分别符合准二级动力学模型和Langmuir 吸附模型; 在溶液接近中性和低温的条件下有利于吸附的进行, 在溶液中存在电解质的条件下不利于吸附的进行. GO具有优异的循环吸附性能, 经过多次循环使用后依然可以保持良好的吸附能力. GO对BPA的吸附机理主要是由于GO本身的片状结构以及表面的含氧极性基团, 会与BPA之间产生π-π色散作用和氢键作用. 虽然GO对BPA的吸附能力不如石墨烯, 但是相比于石墨烯, GO表面含有大量极性基团, 具有良好的亲水性, 且GO合成方法相对简单, 可批量生产用于工业污水处理. 因此, 在水处理领域, GO有能力成为新型高效的吸附剂.     

球形纤维素吸附剂对Cu~(2+)的吸附动力学与热力学研究

以离子液体([Bmim]Cl)为反应介质,丙烯酸为单体,对纤维素进行均相接枝共聚,并采用油包水反相悬浮技术制得球形纤维素吸附剂。采用静态吸附实验方法研究了该吸附剂对水溶液中Cu2+的吸附性能,包括各种因素(溶液pH值,溶液初始浓度,吸附时间,吸附温度)对吸附效果的影响。研究结果表明,适当提高溶液pH值,增加溶液初始浓度,以及延长吸附时间都有利于改善吸附效果;球形纤维素吸附剂对Cu2+的吸附符合Langmuir吸附等温式,吸附过程是自发的放热过程;吸附剂对Cu2+的吸附符合二级吸附动力学模型,吸附过程由膜扩散和颗粒内扩散联合控制。球形纤维素吸附剂对Cu2+的具有很好的吸附性并具有良好的再生性能,可以循环使用。     

二次嫁接法制备氨基修饰的硅基二氧化碳吸附剂

采用二次嫁接法制备了一系列氨基修饰的SBA-15二氧化碳(CO₂)吸附剂,利用XRD、BET、热重、元素分析、电镜、红外等表征手段对吸附剂进行了表征,并通过固定床测量穿透曲线的方法研究了其CO₂吸附性能,分别考察了不同制备途径和不同有机胺类型等因素对吸附剂结构以及其CO₂吸附性能的影响,同时,还通过多次吸脱附实验考察了吸附剂循环吸脱附的稳定性。结果表明,超声法所制备的聚乙烯亚胺(PEI)嫁接的吸附剂具有最优的CO₂吸附性能,在CO₂分压为10 kPa,反应温度为25 ℃时,吸附量达到1.72 mmol/g;进行多次循环吸脱附实验后,吸附量未见明显降低,表明吸附剂具有稳定的循环吸附性能。     

表面印迹聚合物萃取/气相色谱质谱联用检测双酚A

以双酚A(BPA)为模板分子,甲基丙烯酸为单体,乙二醇二甲基丙烯酸酯作为交联剂,在硅胶表面合成双酚A分子印迹聚合物。通过红外光谱、比表面积测定等对表面印迹聚合物进行分析和表征;采用静态吸附法和动态吸附法对其吸附性能进行考察。红外光谱表明硅胶表面生成了对模板分子具有识别功能的官能团;热重分析证明该印迹聚合物具有良好的热稳定性;静态吸附实验说明表面印迹聚合物比非印迹聚合物具有良好的吸附性能,该印迹聚合物对双酚A最大吸附容量Q max为1.501 mg/g,吸附速率常数k为0.01586g/(mg·min)。用表面印迹聚合物萃取(MISPE)和气相色谱质谱(GC-MS)联用检测了BPA样品,BPA的回收率接近90%,并将该双酚A表面印迹聚合物用于牛奶样品中的BPA测试,结果表明该印迹聚合物具有较好的吸附选择性。     

磁性镍基氮掺杂多壁碳纳米管对双酚A的吸附性能及机理研究

通过简单的高温煅烧法制备了具有较大比表面积的磁性镍基氮掺杂多壁碳纳米管材料(Ni-NMCNTs),将该材料用于双酚A(BPA)的吸附研究,对材料吸附前后的形貌和结构变化进行表征,探究其吸附机理。结果表明:具有中空管状结构的磁性Ni-NMCNTs对BPA具有良好的吸附能力和重复利用性,材料中吡啶氮的存在提供了吸附缺陷位且增强了π-π共轭作用,为提高吸附性能奠定了基础。实验发现酸性条件下更有利于Ni-NMCNTs对BPA的吸附,在室温25℃,投加量20 mg,pH 6.0条件下,最大吸附容量可达83.64 mg/g,15 min内BPA的吸附率可达86.8%。吸附过程符合准二级动力学方程和Freundlich吸附等温线模型,热力学参数表明整个过程自发进行。     

TEPA改性多孔GMA-DVB吸附剂的制备及其对CO_2吸附性能研究

以甲基丙烯酸缩水甘油酯(GMA)为单体,二乙烯苯(DVB)为交联剂,采用悬浮聚合法制备GMA-DVB共聚物,进一步通过多乙烯多胺与环氧基之间的开环反应,制备固态胺吸附剂。研究了有机胺类型、吸附温度、流速等对CO_2吸附性能的影响。结果表明,当吸附温度为25℃、流速为30m L/min、CO_2浓度为10vol%、有机胺为TEPA时,此固态胺吸附剂对CO_2的吸附量达到1.93mmol/g。经过8次循环再生吸附后,吸附量仍能保持在初始吸附量的97%。同时采用FT-IR、EA、BET、TG等方法对吸附材料进行了表征。研究结果表明,此固态胺吸附材料具有良好的热稳定性,对CO_2具有良好的吸附性能,是一种理想的固态胺吸附剂。     

硼吸附材料及其性能

硼酸作为一种重要的化学品,广泛应用于工业生产及高尖端技术领域。由于在其生产和应用过程中产生大量含硼废水,从水溶液中回收或脱除硼对资源的重复利用、降低环境污染等都有重要意义。吸附法提硼具有深度脱硼、杂质去除彻底、吸附剂可循环利用和工艺简单等优势,是一种高效脱硼方法,其核心问题在于设计与制备硼吸附容量大、机械强度高且易再生的吸附材料。本文综述了近年来国内外硼吸附材料的类型及其吸附性能,按照吸附功能团的结构将硼吸附材料进行划分,着重介绍了目前应用最广的葡甲胺类吸附剂和最具发展前景的含双酚羟基功能团的吸附剂的研究与应用情况,同时介绍了新型有机-无机杂化硼吸附材料,并指出了今后硼吸附材料的发展趋势,为盐湖卤水提硼、淡化海水脱硼和废水除硼等应用开发中硼吸附材料的选择提供重要参考。     

氨基改性不规则分子筛吸附CO_2性能研究

通过浸渍的方法将合成的超支化大分子聚酰胺胺(PAMAM G0.5~G2.0)负载到不规则分子筛(DMS)上制备循环使用稳定的CO_2吸附剂。利用核磁共振、X-射线衍射(XRD)、红外光谱(FTIR)、BET等分析方法对材料进行了表征,采用动态吸附法对材料的CO_2吸附-脱附性能进行了测定,研究了聚合物代数、负载量和温度对吸附性能的影响。其中DMS-P1(50)吸附材料经过8次的循环吸附脱附,在100%和10%CO_2气氛中吸附量分别为124.8和76.3mg·g~(-1),维持了98.7%和94%的吸附性能,具有优良的CO_2吸附性能和循环稳定性。     

聚乙烯亚胺修饰的氧化硅纳米管基吸附剂的制备及其CO_2吸附应用

以P123为模板,1,2-二(三甲氧基硅基)乙烷(BTME)为硅源合成了介孔氧化硅纳米管(E-SNTs).将ESNTs经过聚乙烯亚胺(PEI)修饰后制得吸附剂用于捕捉CO2.对吸附剂进行了透射电镜(TEM)、物理吸附、傅里叶变换红外(FTIR)光谱、热重分析(TGA)等表征.E-SNTs-PEI吸附剂的最佳CO2吸附温度为75°C.吸附剂的CO2吸附量随着PEI负载量的增加呈现先增大后减小的趋势,其中50%为最佳负载量,此时吸附剂的吸附量最大为3.32 mmol·g-1.相比较SBA-15基吸附剂,E-SNTs基吸附剂具有更优异的吸附性能.在有水汽的存在下,吸附剂E-SNTs-50的CO2吸附量达到3.75 mmol·g-1.经过四次循环吸脱附实验测试E-SNTs-PEI吸附剂的稳定性能,结果表明其CO2吸附量基本不变,该吸附剂表现出较好的稳定性和可再生能力.     

稻壳灰吸附剂对罗丹明B的吸附性能研究

以发电废弃物稻壳灰为原料,以NaOH为活化剂制备了稻壳灰吸附剂,并将其用于去除水中罗丹明B(Rhodamine B,Rh B)染料。系统考察了溶液pH值、初始浓度、吸附时间、吸附温度以及溶液离子强度对其吸附性能的影响。结果表明:pH=3时,稻壳灰吸附剂对水中Rh B的吸附效果最佳,饱和吸附容量q_m为322. 6mg·g~(-1);吸附热力学研究表明,吸附过程符合Langmuir等温吸附模型。吸附过程焓变ΔH为7. 67 kJ·mol~(-1),ΔS为24. 92 J·mol~(-1)·K~(-1),ΔG0,表明稻壳灰吸附剂对Rh B的吸附过程是自发的吸热熵增过程;吸附过程可在20 min内达到平衡,符合准二级动力学模型;吸附过程的活化能E_a为24. 1 kJ·mol~(-1)。吸附容量随着溶液离子强度的增大而减小,说明其吸附是以静电作用为主的吸附过程。10次循环使用后稻壳灰吸附剂对Rh B的吸附效率仍能保持91%以上,表明该材料可以多次循环使用,是潜在的高效吸附材料。     

Facile and versatile strategy to prepare magnetic molecularly imprinted particles based on the coassembly of magnetic nanoparticles and amphiphilic random copolymers

Magnetic molecularly imprinted polymer nanoparticles for bisphenol A were prepared by coassembling magnetic nanoparticles and amphiphilic random copolymers. Under optimized conditions, bisphenol A as template molecules, magnetic molecularly imprinted polymer particles with regular morphology, small size, good monodispersity, and high content of OA‐Fe₃O₄ were prepared by the coassembly method using P(MMA‐co‐MAA) with monomer ratio of 9:1. These magnetic molecularly imprinted polymer particles could be rapidly collected by an external magnet within 1 min. The saturated adsorption capacity of the magnetic molecularly imprinted polymer for bisphenol A was 201.5 mg/g, and the imprinting factor was 2.5. The separation factors for bisphenol A to β‐estradiol, estriol, and diethylstilbestrol was 3.1, 2.9, and 3.7, respectively. Unlike assembling amphiphilic copolymer in the selective solvent, the coassembly process was simple and rapid. Therefore, the present work provided a facile and versatile approach to construct magnetic molecularly imprinted polymer nanoparticles under mild conditions.     

Fabrication of molecularly imprinted resin via controlled polymerization applied in the enrichment of bisphenol A for plastic products

The addition of bisphenol A has been frequently used in industrial manufacturing because it imparts plastic products with characteristics such as transparency, durability, and excellent impact resistance. However, its widespread use raises concerns about potential leakage into the surrounding environment, which poses a significant risk to human health. In this study, molecularly imprinted polymers with specific recognition of bisphenol A were synthesized through surface-initiated atom transfer radical polymerization using poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) as the substrate, bisphenol A as the template molecule, 4-vinylpyridine as the monomer, and ethylene glycol dimethacrylate as the cross-linker. The bisphenol A adsorption capacity was experimentally investigated, and the kinetic analysis of the molecularly imprinted polymers produced an adsorption equilibrium time of 25 min, which is consistent with the pseudo-second-order kinetic model. The results of the static adsorption experiments exhibited consistency with the Langmuir adsorption model, revealing a maximum adsorption capacity of 387.2 μmol/g. The analysis of molecularly imprinted polymers-enriched actual samples using high-performance liquid chromatography demonstrated excellent selectivity for bisphenol A, with a linear range showing 93.4%–99.7% recovery and 1.1%–6.4% relative standard deviation, demonstrating its high potential for practical bisphenol A detection and enrichment applications.     

Selective extraction of bisphenol A from water by one‐monomer molecularly imprinted magnetic nanoparticles

One‐monomer molecularly imprinted magnetic nanoparticles were prepared as adsorbents for selective extraction of bisphenol A from water in this study. A single bi‐functional monomer was adopted for preparation of the molecularly imprinted polymer, avoiding the tedious trial‐and‐error optimizations as traditional strategy. Moreover, bisphenol F was used as the dummy template for bisphenol A to avoid the interference from residual template molecules. These nanoparticles showed not only large adsorption capacity and good selectivity to the bisphenol A but also outstanding magnetic response performance. Furthermore, they were successfully used as magnetic solid‐phase extraction adsorbents of bisphenol A from various water samples, including tap water, river water, and seawater. The developed method was found to be much more efficient, convenient, and economical for selective extraction of bisphenol A compared with the traditional solid‐phase extraction. Separation of these nanoparticles can be easily achieved with an external magnetic field, and the optimized adsorption time was only 15 min. The recoveries of bisphenol A in different water samples ranged from 85.38 to 93.75%, with relative standard deviation lower than 7.47%. These results showed that one‐monomer molecularly imprinted magnetic nanoparticles had the potential to be popular adsorbents for selective extraction of pollutants from water.     

Highly ordered molecularly imprinted mesoporous silica for selective removal of bisphenol A from wastewater

Selective removal of bisphenol A from wastewater is quite challenging primarily because of its low concentration and matrix complexity. To this end, according to the molecular structure of bisphenol A, we designed a functional monomer for the preparation of molecularly imprinted mesoporous silica using click chemistry reaction. The resultant bisphenol A imprinted mesoporous silica was characterized by transmission electron microscopy, small angle X‐ray diffraction, and N₂ adsorption–desorption experiments. The results indicated that the bisphenol A imprinted mesoporous silica possessed a highly ordered periodic hexagonal mesostructure with the Brunauer–Emmett–Teller surface area of 944.28 m²/g. The bisphenol A imprinted mesoporous silica showed fast adsorption kinetics and the saturated adsorption capacity reached up to 88.6 mg/g at pH 6.5, and with relative selectivity factors ranged from 1.06 to 3.20. The adsorption efficiency of the bisphenol A imprinted mesoporous silica was above 97.96% after five extraction/elution cycles. The bisphenol A imprinted mesoporous silica was further applied to the selective removal of bisphenol A from real wastewater samples and showed great promise in practical applications.     

双酚F分子印迹聚合物的制备及其对水相中双酚F吸附性能的研究

以双酚F(4,4′-BPF)为模板分子,α-甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酸酯(EGDMA)为交联剂,偶氮二异丁腈(AIBN)为引发剂,采用沉淀聚合法合成4,4′-BPF分子印迹聚合物(MIPs)。运用傅里叶红外(FT-IR)光谱对产物的结构进行表征,并对其吸附等温线、吸附动力学、吸附热力学及选择性识别性能进行研究。结果表明:MIPs对水相中4,4′-BPF具有特异性吸附,最大吸附容量为82.8 mg/g;Freundlich模型拟合吸附等温线的相关系数R2=0.995;热力学参数ΔG、ΔS、ΔH均小于0,表明此吸附过程是自发进行的、熵减的、放热的。     

Rapid Determination of Phenolics in Food Packaging by Magnetic Solid-Phase Extraction and High-Performance Liquid Chromatography

A method for magnetic solid-phase extraction was developed for the preconcentration of bisphenol A, bisphenol AF, tetrabromobisphenol A, and 4-tert-octylphenol from food containers and packaging materials. Cetyltrimethylammonium bromide was added to a solution of magnetic nanoparticles to enhance adsorption of the analytes prior to high-performance liquid chromatography. The effects of the amount of surfactant, the amount of magnetic nanoparticles, the pH, the adsorption time, the desorption solution, and the reuse of the extractant were optimized. The linear dynamic ranges were from 0.05 to 25 milligrams per liter. The limits of detection were between 1.21 and 2.48 micrograms per liter, the limits of quantification were from 4.03 to 8.27 micrograms per liter, and the relative standard deviations were between 2.2 and 4.1 percent. This magnetic solid-phase extraction approach was successfully employed for the analysis of plastics with recoveries from 88.0 to 101.1 percent and relative standard deviations between 2.3 and 5.4 percent.     

Adsorption of phenolic compounds onto trimethylstearylammonium surfactant-immobilized cation-exchange membranes

Trimethylstearylammonium hydroxide/methoxide surfactants were immobilized onto two kinds of cation-exchange membranes (P81 and S2001) for the adsorption of phenolic compounds in the present study. The results indicate that the membrane with a doubled cation-exchange capacity (S2001) could attain nearly twice of the immobilized surfactant amount, but its surfactant immobilization % was close to or lower than the one with a smaller cation-exchange capacity (P81). By manipulating the feed surfactant concentration, different surfactant arrangements on the membrane surfaces (such as hemimicellar, admicellar, or mixed structure) could be produced. The membranes with theoretically 100% surfactant immobilization revealed the highest hydrophobicity level, and thus they were applied in the batch adsorption of phenolic compounds. According to the batch adsorption results of four phenolic compounds onto the surfactant-immobilized membranes (100% immobilization), the main adsorption mechanism should be hydrophobic interaction and the order of phenolic compound adsorptivity was phenol < 4-nitrophenol < 4-chloro-3-methylphenol ≤ bisphenol A, identical to their log K_ow order. Moreover, in a batch adsorption/desorption cycle with 100 mL of 1 ppm bisphenol A aqueous sample tested and 5 mL of 2-propanol as the desorbent, the S2001 membrane (100% surfactant immobilization) could completely recover bisphenol A from water at a 20-fold enrichment.     

壬基酚表面印迹聚合物微球的合成及分子识别特性

采用表面分子印迹技术,在二氧化硅微粒表面通过乙烯基三甲氧基硅烷接枝,以壬基酚(NP)为模板、α-甲基丙烯酸为功能单体制备了壬基酚印迹聚合物。扫描电镜及比表面分析仪测试结果表明制备的印迹聚合物呈均匀分散的微球,具有较大的比表面积。采用红外光谱表征印迹聚合物微球制备过程中的化学结构变化情况,并用平衡吸附法研究了聚合物对NP的结合性能与分子识别特性。研究结果表明,聚合物对壬基酚具有良好的结合亲和性,最大结合量可达184.6 mg/g。印迹聚合物对NP的吸附量高于其结构类似物对特辛基酚和双酚A的吸附量,表现出较高的选择性识别能力。     

替代模板分子印迹聚合物的制备及其用于人尿、牛血清和啤酒中7种双酚类物质的选择性固相萃取

以酚酞(PP)为替代模板,采用本体聚合法制备了选择性识别7种双酚类物质(BPs)的分子印迹聚合物(MIP)。将制备的PP-MIP用作固相萃取(SPE)填料,成功应用于人尿、牛血清和啤酒样品中7种BPs的分离净化。建立了同时测定人尿、牛血清和啤酒样品中的7种BPs的MIP-SPE-HPLC分析方法。3种样品中7种BPs的方法检出限范围均为1.2~2.0 μg/L。结果表明,7种BPs在0.02~2 mg/L范围内线性关系良好,相关系数(r)大于0.9998;空白样品中加标水平为100和500 μg/L的回收率范围为90.1%~107.1%,相对标准偏差(RSD)不高于8.1%。该方法简便、准确、灵敏、可靠,可用于人尿、牛血清和啤酒中7种BPs的快速检测。