N_5O_3-TRPO混合萃取剂从碱性氰化液中萃金

研究 N5O3- TRPO混合萃取剂从碱性氰化液中萃取金 ,考察了平衡时间、水相初始 PH值、水相离子强度、金浓度、N5 0 3浓度、磷类添加剂的种类及其浓度、稀释剂、温度、相比等因素对金萃取率的影响 ,绘制了萃取等温线 ,测定了金的饱和容量 ,考察了所选定的萃取体系对银 ( )、铁 ( )、铜 ( )、镍 ( )、锌 ( )的萃取性能 ,计算出了金与这些杂质元素的分离系数。研究了负载有机相中金的反萃。结果表明 N5O3- TRPO ROH正十二烷体系对 Au( CN) 2 具有较高的萃取率和选择性 ,可应用于碱性氰化液中金的萃取分离。     

Lix7825从碱性氰化液中萃取分离金

研究了胍类萃取剂Lix782 5对碱性氰化液中金的萃取 ,考察了平衡时间、水相pH值、金初始浓度、离子强度、有机相中Lix782 5浓度、稀释剂的种类、添加剂浓度、温度、相比等因素对金萃取率的影响 ,测定了金的饱和容量 ,研究了Lix782 5对银、铁、铜、镍氰配合物的萃取 ,计算出了金与这些杂质元素之间的分离系数。结果表明 :萃取体系 1 % (v v)Lix782 5— 5% (v v)ROH—C1 2H2 6从碱性氰化物中萃取金具有萃取动力学速度快 ( <5min)、分相快、界面清晰、易反萃、选择性高等优点。金萃取容量可达 3 1 4g L ,并且用合成料液及实际料液进行了金的萃取分离试验 ,得到了较好的结果     

多烷基支链仲胺从碱性氰化液中萃取金

研究了多烷基支链促胺从碱性氰化液中萃取金,考察了平衡时间、水相初始pH值、金浓度、离子强度、温度、萃取剂浓度、稀释剂、相比等因素对金萃取率的影响,绘制了萃取等温线,测定了金的饱和容量,考察了萃取体系对银（Ⅰ）、铁（Ⅱ）、铜（Ⅰ）、镍（Ⅱ）、锌（Ⅱ）的萃取性能,计算出了金与这些杂质元素的分离系数,研究了负载有机相中金的反萃,结果表明,该萃取体系在pH5－11范围内对Au（CN）2^－有较高的萃取率和选择性,pH1／2＝11.7,可用于碱性氰化液中金的萃取分离。     

溴代十六烷吡啶从碱性氰化液中固相萃取金的研究

基于溴代十六烷吡啶(CPB)与Au(CN)2-络阴离子生成的离子缔合物可被反相键合硅胶固相萃取柱萃取、富集,建立了一种从碱性氰化液中高富集倍数固相萃取金的方法。在碱性介质中,溴代十六烷吡啶(CPB)与Au(CN)2-络阴离子生成离子缔合物,该离子缔合物可被反相键合硅胶固相萃取柱萃取、富集,富集的离子缔合物可用乙醇洗脱,洗脱液经处理后用分光光度法测定,反相键合硅胶固相萃取柱不被破坏而且可重复使用。方法用于从碱性氰化液中固相萃取痕量金,萃取回收率可超过98%,研究了反向固相萃取金的机理,同时提出了一种从碱性氰化液中提取金的新工艺。     

N1923从碱性氰化液中萃取金(Ⅰ)的研究

采用放射性同位素198Au示踪法研究了伯胺N1923和TBP从碱性氰化液中萃取金(Ⅰ),考察了酸化率、水相pH值、萃取剂浓度等对萃取率的影响,以及NaOH对载金有机相的反萃作用。结果表明,TBP含量大于20％,酸化的N1923与KAu(CN)2摩尔比值在11时,金能够完全被萃取。载金有机相可采用0.1mol·L-1的NaOH溶液定量反萃。机理研究表明,伯胺和TBP萃取Au(CN)2-,符合BC类协同萃取机理。当金浓度大于10g·L-1时,在萃取有机相中形成纳米级的聚集体。     

十二烷基二甲基苄基氯化铵从碱性氰化液中固相萃取金的研究

建立了一种用十二烷基二甲基苄基氯化铵(BDMDAC)从碱性氰化液中固相萃取金的新方法:在碱性介质中,十二烷基二甲基苄基氯化铵溶液(BDMDAC)与Au(CN)2-络阴离子生成离子缔合物,该离子缔合物可被反相键合硅胶固相萃取柱萃取、富集,用乙醇洗脱,反相键合硅胶固相萃取柱可重复使用。该方法用于从碱性氰化液中固相萃取痕量金,萃取回收率可超过98%。     

十二烷基二甲基苄基氯化铵从碱性氰化液中固相萃取金的研究

建立了一种用十二烷基二甲基苄基氯化铵(BDMDAC)从碱性氰化液中固相萃取金的新方法：在碱性介质中,十二烷基二甲基苄基氯化铵溶液(BDMDAC)与Au(CN)2-络阴离子生成离子缔合物,该离子缔合物可被反相键合硅胶固相萃取柱萃取、富集,用乙醇洗脱,反相键合硅胶固相萃取柱可重复使用。该方法用于从碱性氰化液中固相萃取痕量金,萃取回收率可超过98%。     

氰化金浸取液萃取机理研究

本文利用Fourier变换红外光谱 (FTIR)、放射性同位素示踪、激光光散射的实验等方法研究了有机相的溶液结构 ,初步提出季胺盐萃取金有机相中氰化金阴离子参与形成超分子结构 ,并且随着有机相中金浓度的增加 ,萃合物形成聚集体     

用BPR树脂从氰化液中提取金

研究了用烷基吡啶基聚苯乙烯树脂(BPR)从氰化液中吸附各种金属氰离子。加入抑止剂可以改善BPR树脂吸附金的选择性。探讨了pH值、氰离子浓度和金氰络离子浓度的影响。     

表面活性剂从碱性氰化液中萃取金

溶剂萃取法从碱性氰化液中提取金的工艺相对于传统锌置换法和活性炭吸附法具有潜在的优势,因而备受青睐。本文综述了近几年来从碱性氰化液中溶剂萃取金的研究进展。文中对表面活性剂/改性剂萃取Au(Ⅰ)的机理、萃取及反萃取行为进行了总结,报道了表面活性剂种类、改性剂种类、稀释剂以及盐析剂等各种因素对萃取过程的影响。同时,在萃取机理方面,提出一种基于氢键的超分子萃合物模型,在反萃取方面,介绍了阴离子交换法、转化还原法及直接电解有机相3种方法。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.