傅立叶变换红外光谱法测定聚苯醚-聚苯乙烯共混物中的组分含量

采用傅立叶变换红外光谱对PPO/PS共混合金样品的组成进行了定量分析.以1 305 cm-1峰和699 cm-1峰分别作为聚苯醚和聚苯乙烯的定量吸收峰,并将其峰面积之比作为定量分析的基础.利用郎伯-比耳定律的理论建立了定量工作曲线,可满足PPO(或者PS)在5%～95%之间的PPO/PS共混合金样品组成的定量分析.分别采用红外光谱和核磁共振对样品进行定量分析,结果显示,两种方法定量结果的相对偏差在5%以内.红外定量方法测定结果的相对标准偏差小于2.5%(n=6).该方法可快速、准确地运用于PPO/PS共混合金样品的红外定量分析.     

PPO/SEBS-g-MAH共混体系的形态结构与冲击性能

从亚微相态和冲击性能出发 ,对比了采用熔融挤出法制备的PPO/SEBS和PPO/SEBS g MAH两种共混物 .结果表明 ,在本文所研究的弹性体用量范围内 ,PPO/SEBS为“海 岛”型结构 ,而PPO/SEBS g MAH呈现网状结构 ;PPO/SEBS体系无脆韧转变现象 ,PPO/SEBS g MAH体系则在弹性体用量为 10 %～ 15 %时出现明显的脆韧转变 ,缺口冲击强度达到 95 0J/m ,这种超韧现象源于其网状结构的形成 .文中进一步用DSC和毛细管流变仪对共混体系的热性能和流变性能进行了测试 ,探讨了PPO/SEBS g MAH共混物网状结构的形成原因     

多单体接枝聚丙烯对PBT/PP共混体系的形态结构及力学性能影响研究

研究了甲基丙烯酸缩水甘油酯 (GMA)和苯乙烯 (St)多单体熔融接枝聚丙烯 (PP g (GMA co St) )对聚对苯二甲酸丁二酯 (PBT) 聚丙烯 (PP)共混物的形态结构和力学性能的影响 .利用双螺杆挤出机对PBT PP合金进行共混挤出 ,使用DSC、FT IR和SEM、TEM等手段对共混物进行了分析和相形态观察 ,并测试了力学性能 .实验证明 ,熔融共混过程中PP g (GMA co St)的环氧基团可以与PBT的端羧基发生化学反应 ,就地生成了PBT g PP共聚物 ,该共聚物可对PBT PP合金起到良好的增容剂作用 ,使共混物的相区尺寸显著减小 ,共混物的拉伸强度和冲击强度等力学性能同时得到明显改善 ,达到了弹性体系或小分子增容所难以达到的力学性能平衡的效果 .此外 ,TEM的研究还在PBT PP g (GMA co St)共混物中发现了特殊的微相分离结构     

异山梨醇型聚碳酸酯与ABS树脂共混体系的结构与性能研究

采用异山梨醇型聚碳酸酯(DB),与掺混型ABS熔融共混制备了具有不同聚丁二烯(PB)含量和丙烯腈(AN)含量的DB/掺混型ABS合金,并在考察掺混型ABS特征对合金结构与性能的影响的基础上,分别使用同种掺混型ABS以及各种商品化ABS树脂,比较了DB/ABS合金和双酚A型聚碳酸酯/ABS合金的性能及其变化规律.结果表明,对DB/掺混型ABS(70/30)合金而言,PB含量变化对于合金拉伸性能的影响明显大于AN含量变化所带来的影响,在PB含量为6.3 wt%条件下,各不同AN含量的合金体系均有最好的性能表现.PB含量和AN含量变化对合金分散相形态的影响与力学拉伸性能变化特征一致.DB/ABS合金体系均具有良好的热稳定性与热力学相容性,受AN含量和PB含量变化的影响较小,合金玻璃化转变温度与DB非常接近.以双酚A型聚碳酸酯为基础的聚碳酸酯(PC)/ABS合金及以异山梨醇型聚碳酸酯为基础的DB/ABS合金,在拉伸性能变化上均表现出完全相同的规律,且无论是采用掺混型ABS还是采用商品化ABS的体系,PC/ABS与DB/ABS合金在拉伸性能所反映出的规律也是基本一致的.     

SBS热裂解动力学研究

热塑弹性体SBS是苯乙烯—丁二烯—苯乙烯嵌段共聚物,它不用硫化就有硫化橡胶的性能,如高的抗张强度、伸长率、良好的回弹性、耐磨性和溶解性等。有关SBS的裂解色谱探讨,Zizin等曾作过报导。本文采用管炉裂解气相色谱激动,对SBS热裂解反应的机制及其动力学进行了研究。     

共混高聚物的混溶性研究(摘要)

在此介绍马萨诸塞州立大学在共混高聚物方面的研究工作。这些共混高聚物可分为三类:(1)非晶—非晶,如PCL(聚己内酯)(<50％)/PVC(聚氯乙烯);(2)结晶—非晶,如PCL(>50％)/PVC、i-PS(全同立构聚苯乙烯)/PPO(聚苯醚)、i-PS/α-PS(无规聚苯乙烯)、PVF_2(聚偏氟乙烯)/PMMA(聚甲基丙烯酸甲酯);(3)结晶—结晶,如PBT(聚对苯二甲酸丁二酯)/PET(聚对苯二甲酸乙二酯)。为研究第一类非晶共混物的混溶性,以 PCL/PVC     

PC/尼龙6共混合金的结晶结构与性能

聚碳酸酯(PC)由于具有突出的冲击韧性、良好的透明性、尺寸稳定性和电气绝缘性而广泛应用于电子电气、仪器仪表、汽车、机械、医疗、照明和建筑等领域,是一种综合性能优良的工程塑料.但也存在着加工流动性差和耐药性差、易应力开裂及对缺口敏感等缺陷,且价格昂贵,因而限制了它的应用范围.对PC进行合金化,提高PC的性能,降低成本是PC改性的重要研究方向,开发成功的PC合金有PC/ABS,PC/PET,PC/PBT[1]和PC/PE[2]等.制备高性能PC/尼龙6(PA6)合金是目前国内外PC改性的热点.PA6的加入可以改善PC的耐药性、耐应力开裂性及加工性能,降…     

含聚醚链段聚酰亚胺膜的制备及气体分离性能

利用均苯四甲酸二酐（PMDA）与4,4’-二氨基二苯醚（ODA）和聚醚胺（PPO, Mn～2000）共聚合,合成聚酰胺酸前驱体,经热处理得到一系列含PPO链段的聚酰亚胺薄膜.研究了PPO链段的引入对薄膜结构及气体分离性能的影响.结果表明,在芳香族聚酰亚胺中引入柔性链段PPO有利于气体分子的传输.得益于PPO链段在分离膜内部形成的微相分离结构,气体分子在分离膜内的扩散系数随PPO含量的增加显著提升.当PPO含量为65 wt%时,PPO链段在分离膜内仍呈现非晶相,CO₂渗透系数高达131.61 Barrer,比PMDA/ODA均聚聚酰亚胺薄膜提高22倍.同时,得益于聚醚链段对CO₂独特的亲和作用,随着PPO含量的提高,分离膜对CO₂/N₂的分离系数由18.77提高至30.12.结果表明PPO链段的引入对于调控聚酰亚胺膜的结构和气体分离性能具有重要作用.     

稀土铅钙合金与传统铅钙合金在硫酸溶液中的阳极行为研究

应用交流阻抗,交流伏安和循环伏安等方法研究了Pb-Ca-Sn-Re合金和Pb-Ca-Sn合金在1.28 V(vs.SCE)和4.5 mol/L硫酸溶液中的阳极行为.结果表明:稀土铅钙合金提高了合金的耐腐蚀性能,同时抑制其阳极膜中Pb(Ⅱ)化合物的生长,从而降低阳极膜的阻抗,提高膜的导电性能,这对改善电池的深循环性能十分有利.     

超临界甲醇降解对苯二甲酸丁二酯的研究

作为一种综合性能优良的新型工程塑料,对苯二甲酸丁二酯(PBT)工程塑料及其各种合金在全球范围内已经广泛用于电子电气、汽车、机械及民用等各个领域,而中国是其中需求量最大的国家．     

The impact of resorcinol bis(diphenyl phosphate) and poly(phenylene ether) on flame retardancy of PC/PBT blends

Flame retardancy of bisphenol A polycarbonate (PC)/poly(butylene terephthalate) (PBT) blends was improved by the addition of resorcinol bis(diphenyl phosphate) (RDP) and poly(phenylene ether) (PPO). A PC/PBT blend at 70/30 weight ratio obtained a V‐0 rating by the addition of 10 wt% RDP and 10 wt% PPO. The combination of 5 wt% methyl methacrylate‐butadiene‐styrene tercopolymer (MBS) with 3 wt% ethylene‐butylacrylate‐glycidyl methacrylate tercopolymer (PTW) causes a remarkable increase in toughness of the PC/PBT/RDP blend while maintaining a high rigidity. A detailed investigation of the flame‐retardant action of PC/PBT/RDP and PC/PBT/RDP/PPO blends was performed using thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), TGA‐FTIR, temperature‐programmed pyrolysis/gas chromatography/mass spectrometry (TPPy/GC/MS), and scanning electron microscopy/energy dispersive spectrometer (SEM/EDS). The results demonstrate that RDP induces a higher char yield at ca. 450 °C and synchronously increases the thermal stability of the blend with PPO. The flame‐retardant role of RDP in the condensed phase was discerned from TGA, FTIR, and SEM/EDS of the residues. Copyright © 2010 John Wiley & Sons, Ltd.     

Mechanical properties of thermoplastic polyester elastomer controlled by blending with poly(butylene terephthalate)

Thermoplastic polyester elastomer (TPEE) blends with poly(butylene terephthalate) (PBT) were prepared by melt compounding for the phase morphology and mechanical property studies. Although PBT is immiscible with the continuous soft poly(tetramethylene glycol) (PTMEG) phase of TPEE, it is miscible with the discrete hard PBT one of TPEE. Therefore, PBT and TPEE are compatible and their blends reveal very low level of interfacial tension and very small size of discrete domains, as well as good interfacial adhesion between two phases, which provide high possibility to prepare TPEE alloys with controllable properties. Mechanical test results reveal that both the modulus and yield and tensile strengths increase with increasing weight ratios of PBT. The increased system rigidity and decreased system plasticity are further confirmed by the cyclic tensile tests. The main objective of this work is to provide useful information on the structure and property control of TPEE by simple mixing with aromatic polyesters.     

Toughening of poly(2,6-dimethyl-1,4-phenylene oxide)/nylon 6 alloys with functionalized elastomers via reactive compatibilization: morphology, mechanical properties, and rheology

Blends of poly(2,6-dimethyl-1,4-phenylene oxide)/nylon 6 alloys based on ethylene-propylene-diene elastomer (EPDM) grafted with maleic anhydride (MA) (EPDM-g-MA), EPDM grafted with glycidyl methacrylate (EPDM-g-GMA), and styrene-ethylene-butadiene-styrene block copolymer grafted with MA (SEBS-g-MA) were prepared via melt extruction, and morphology, mechanical properties, and rheology were studied. The compatibilizing effects of functionalized elastomers on the PPO/nylon 6 alloys were proved by DSC analysis and confirmed by the significant improvement in the notched Izod impact strength. Toughening was resulted from the smaller particle size and finer dispersion of EPDM in the PPO/nylon 6 matrix as well as a novel network structure of SEBS-g-MA domain in matrix. The notched Izod impact strength of the blends exhibited an optimum value when the extent of MA or GMA graft ratio of EPDM varied, which was an order of magnitude higher than the non-toughened alloys. The morphology revealed that the size of EPDM particles decreased with an increase in graft ratio of MA or GMA onto EPDM. Rheology investigation indicated that the MA or GMA moieties on EPDM reacted with the amine groups of nylon 6, which increased the molecular weight and the degree of branching, and thus resulted in an increase in the viscosity of the blends. This proved the reactive compatibilization between functionalized EPDM and PPO/nylon 6 matrix.     

酯交换反应对PBT／PC共混体系相容性及热行为的影响

研究了ＰＢＴ、ＰＣ间的酯交换反应及共混体系的相容性和热行为。ＩＲ结果表明，在熔融共混过程中ＰＢＴ、ＰＣ间发生了酯交换反应，磷酸三苯酯可在一定程度上抑制酯交换反应的进行，但是当温度过高或共混时间过长时，ＴＰＰ的作用减弱甚至消失。     

聚苯硫醚共混合金的研究进展

本文简述了特种工程塑料聚苯硫醚（PPS）与其它多种高聚物的共混改性，分别介绍了PPS／PA、PPS／PEEK、PPS／PSF、PPS／TLCP、PPS／PF、PPS／PBT、PPS／PES、PPS／PC、PPS／PEK－C、PPS／PS以及其它PPS共混合金在国内外的研究进展及其生产应用，其中重点论述了PPS与聚四氟乙烯（PTFE）树脂的共混改性及其该共混合金的性能与用途。并展望了PPS合金的发展。     

Preparation of core-shell structured polyacrylic modifiers and effects of the core-shell weight ratio on toughening of poly(butylene terephthalate)

Core-shell structured polyacrylic(named CSSP) impact modifiers consisting of a rubbery poly(n-butyl acrylate) core and a rigid poly(methyl methacrylate) shell with a size of about 353 nm were prepared by seed emulsion polymerization. The CSSP modifiers with different core-shell weight ratios(90/10, 85/15, 80/20, 75/25, 70/30, 65/35 and 60/40) were used to modify the toughness of poly(butylene terephthalate)(PBT) by melt blending. It was found that the polymerization had a very high instantaneous conversion(> 95.7%) and overall conversion(99.7%). The morphology of the core-shell structure was confirmed by means of transmission electron microscopy. Scanning electron microscopy was used to observe the morphology of the fractured surfaces. Differential scanning calorimeter was used to study the crystallization behaviors of PBT/CSSP blends. The dynamic mechanical analyses of PBT/CSSP blends showed two merged transition peaks of PBT matrix, with the presence of CSSP core-shell structured modifier, that were responsible for the improvement of PBT toughness. The results indicated that the notch impact strength of PBT/CSSP blends with a core-shell weight ratio of 75/25 was almost 8.64 times greater than that of pure PBT, and the mechanical properties agreed well with the SEM observation.     

Effect of PBT molecular weight and reactive compatibilization on the dispersed‐phase coalescence of PBT/SAN blends

Poly(butylene terephthalate) (PBT)/styrene‐acrylonitrile copolymer (SAN) blends were investigated with respect to their phase morphology. The SAN component was kept as dispersed phase and PBT as matrix phase and the PBT/SAN viscosity ratio was changed by using different PBT molecular weights. PBT/SAN blends were also compatibilized by adding methyl methacrylate‐co‐glycidyl methacrylate‐co‐ethyl acrylate terpolymer, MGE, which is an in situ reactive compatibilizer for melt blending. In noncompatibilized blends, the dispersed phase particle size increased with SAN concentration due to coalescence effects. Static coalescence experiments showed evidence of greater coalescence in blends with higher viscosity ratios. For noncompatibilized PBT/SAN/MGE blends with high molecular weight PBT as matrix phase, the average particle size of SAN phase does not depend on the SAN concentration in the blends. However noncompatibilized blends with low molecular weight PBT showed a significant increase in SAN particle size with the SAN concentration. The effect of MGE epoxy content and MGE molecular weight on the morphology of the PBT/SAN blend was also investigated. As the MGE epoxy content increased, the average particle size of SAN initially decreased with both high and low molecular weight PBT phase, thereafter leveling off with a critical content of epoxy groups in the blend. This critical content was higher in the blends containing low molecular weight PBT than in those with high molecular weight PBT. At a fixed MGE epoxy content, a decrease in MGE molecular weight yielded PBT/SAN blends with dispersed nanoparticles with an average size of about 40 nm. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Isothermal crystallization kinetics and mechanical properties of poly(butylene terephthalate)/attapulgite nanocomposites

Poly(butylene terephthalate) (PBT)/attapulgite (AT) nanocomposites were prepared by in situ polymerization. Morphology of the PBT/AT nanocomposites was observed by scanning electron microscope and polarizing optical microscope. Thermogravimetric analyses were used to examine the thermal stability. The melting behaviors, equilibrium melting temperature, isothermal crystallization behavior of pure PBT and PBT/AT nanocomposites were studied by differential scanning calorimetry. The results show that PBT/AT nanocomposites possess higher thermal stability than pure PBT, and AT nanoparticles play a heterogeneous nucleating agent in PBT crystallization that accelerated the crystallization rate. The PBT/AT nanocomposite with higher AT content could retard the transport of polymer chains to the growing crystals compared with that of PBT/AT nanocomposite in lower AT content. According to dynamic mechanical analysis results, the storage modulus of PBT/AT nanocomposites was markedly improved and the addition of AT nanoparticles promotes the crystallization of PBT, which decreases the amorphous area. Meanwhile, the well-dispersed AT nanoparticles also retard the movement of polymer chain segment and increase the proportion of rigid amorphous region.     

Effect of Epoxy Resin on the Thermal,Mechanical and Rheological Properties of Polybutylene Terephthalate/Glycidyl Methacrylate Functionalized Methyl Methacrylate-butadiene Blend

Epoxy resin was used to modify polybutylene terephthalate(PBT) and glycidyl methacrylate functionalized methyl methacrylate-butadiene(MB-g-GMA) blend. Results show that MB-g-GMA dispersed in PBT matrix uniformly and PBT/MB-g-GMA/epoxy blends reveal good compatibility. However, the added epoxy resin restricted the mobility of PBT macromolecular chains during the growth process of the crystal, which reduced the final crystallinity of PBT. The PBT/MB-g-GMA blend containing 1%(mass fraction) epoxy resin exhibited good mechanical properties. For example, the notched impact strength of the PBT/MB-g-GMA blend with 1%(mass fraction) epoxy resin was about 2 times that of PBT/MB-g-GMA blend. Sanning electron microscope(SEM) results show that the shear yielding of the PBT matrix and the cavitations of rubber particles were the major toughening mechanisms. The chemical reaction between PBT and epoxy resin induced the high complex viscosity and storage modulus of PBT/MB-g-GMA blend.     

三元乙丙橡胶环氧化增韧聚对苯二甲酸丁二酯的研究

三元乙丙橡胶环氧化增韧聚对苯二甲酸丁二酯的研究王学会，张会轩，王新华，王志刚，蒋俊光，姜炳政（吉林工学院化工系，长春，１３００１２）（中国科学院长春应用化学研究所）关键词三元乙丙橡胶，环氧化，ＰＢＴ，增韧作用，共混物聚对苯二甲酸丁二酯（ＰＢＴ）具有优...