单分散多孔St/DVB共聚微球的制备

用分散聚合法制出了粒径约为2μm的单分散聚苯乙烯(PSt)种子,再通过改进的活性二步种子溶胀法制得了粒径约为4．5μm的单分散多孔St／DVB共聚微球。在溶胀阶段,用XSP-8CA生物显微镜观察活化、溶胀温度,1～氯代十二烷(CD,mL)／PSt(g)的比例及单体混合物总体积对溶胀种子粒径及单分散的影响,确定了合适的制备工艺条件。用SEM观察多孔聚合物微球的粒径和形貌,并用BET法考察了不同比例的及甲苯浓度变化对多孔聚合物微球孔结构的影响,实验表明,随着VDVB／Vst的比例的增大和甲苯浓度的提高,多孔微球的比表面积增大,孔分布向小孔区域移动。     

模板法制备聚苯乙烯/聚4-乙烯基吡啶功能微球

以工业化的聚苯乙烯中空微球为模板,利用种子乳液法合成了粒径均一的功能化中空聚苯乙烯/聚4-乙烯基吡啶(PS/P4VP)微球,改变制备条件可以控制功能基团4-乙烯基吡啶(4-VP)在聚苯乙烯微球表面的分布.合成的微球在水和有机溶剂如二氯甲烷、乙醇、乙腈等中有良好的分散性,并能促进油水体系混溶.     

粒径和孔径可控的多孔交联聚苯乙烯微球的制备

采用悬浮聚合方法合成了多孔交联聚苯乙烯微球,研究发现微球的粒径与分散剂含量、水油比、搅拌速度和成孔剂有关,而微球的孔径与成孔剂的种类和含量有关。 增加分散剂的用量,提高水油比和加快搅拌速度都能导致微球的粒径减小。 微球的孔径和粒径均随着成孔剂与聚合物溶度参数差值变大而增加。通过改变以上条件得到粒径为100~300 μm和孔径为8~36 nm的交联度为27%的多孔交联聚苯乙烯微球,并利用光学显微镜、场发射扫描电子显微镜(SEM)和氮气吸附解吸法对微球进行了相应的表征。 得到的微球在固相合成载体中有一定的应用前景。     

中空微球及其制备方法

中空微球具有低密度、高比表面积且可以容纳客体分子等特点,在众多领域受到广泛关注.本文对聚合物中空微球、无机中空微球、聚合物/无机复合中空微球的制备方法进行了综述,并介绍了一种在使用过程中形成中空结构的可膨胀微球.     

单分散聚苯乙烯微球的制备及表征

应用膜乳化-液中干燥法成功制备出粒径为2～20μm的单分散聚苯乙烯(PS)微球.PS微球的粒径主要由膜孔径决定,其值约为膜孔径的2倍;PS溶液的浓度对其也有一定的影响.膜乳化过程中的压力对微球粒径的分散性有很大的影响,在一定压力范围内,粒径呈单分散.在分散相中加入致孔剂,制备出表面多孔的PS微球.采用复乳-液中干燥法制备出中空PS微球.     

单分散交联聚苯乙烯微球HPLC固定相的合成

用分散聚合物合成了单分散聚苯乙烯微球种子，然后用种子聚合法合成了交联的聚苯乙烯向球，其粒径范围可控制在２μｍ～４μｍ，考察了反应条件对微球粒径和粒径分布的影响，确定了最佳合成条件，初步考察了交联微球的ＨＰＬＣ性能。     

不同溶剂制备的聚乳酸多孔微球的形成机理

利用改进的双乳液溶剂挥发法制备了多孔聚乳酸( PLA)微球.通过采用具有不同沸点和水溶性的有机溶剂制备得到不同多孔结构的PLA微球.结果发现以二氯甲烷、氯仿和甲苯为溶剂制备的微球具有相似的均匀多孔结构,而以乙酸乙酯制备的微球却具有中空结构和多孔的壳层.通过进一步的实验研究了溶剂种类对于微球多孔结构的影响.结果表明溶剂的...     

Fe3O4／P（St—AA）核—壳复合微球的制备和表征

以磁性氧化铁胶体粒子为种子，运用分散聚合法，制备出具有磁响应性的Ｆｅ３Ｏ４／Ｐ（Ｓｔ－ＡＡ）核－壳复合微球，考察了复合微球的形态及结构，测定了复合微球的粒径和磁响应性，研究了分散介质，引发剂，聚合单体和种子粒子等因素对复合微球形成的影响。     

钇掺杂锆酸钡中空微球的发光性能

采用水热法合成了不同钇掺杂量的BaZrO3中空微球,并通过TEM,XRD和SEM等手段对样品进行了表征.结果表明,样品均为中空微球,钇掺杂进入BaZrO3晶格,产物均具有立方钙钛矿型结构.中空微球的粒径随钇掺杂量的增加由180 nm增大到300 nm.钇掺杂量小于3%时,可得到纯相.不同掺杂量的中空微球在410 nm光...     

中空TiO_2微球的制备及对聚丙烯酸酯薄膜性能的影响

采用阳离子聚苯乙烯微球作为模板,钛酸四丁酯为钛源,氨水为催化剂,制备了中空TiO_2微球.采用X射线衍射、扫描电镜及比表面测定仪对其形貌和结构进行了表征,并考察了模板粒径、钛源用量以及催化剂用量对中空TiO_2微球形貌的影响.通过物理共混法将其引入至聚丙烯酸酯乳液中并成膜,研究了复合薄膜的保温性能、抗紫外性能及力学性能.结果表明,锐钛矿相中空TiO_2微球模板粒径、钛源用量以及催化剂用量影响中空TiO_2微球的空心尺寸、壁厚及壳层致密性.中空TiO_2微球可显著提升聚丙烯酸酯薄膜的保温性能、抗紫外性能和力学性能.采用不同粒径的模板制备的中空TiO_2微球对复合薄膜的各项性能均有影响,其中模板粒径为140 nm时复合薄膜性能最优,光反射率提升63%,导热系数降低27%,且在波长小于360 nm范围内,紫外透过率几乎为0,抗张强度增加100%,断裂伸长率提升62%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.