共查询到20条相似文献,搜索用时 62 毫秒
1.
2.
以阴离子聚合法合成的窄分布聚苯乙烯(NDPS)进行氯甲基化后,再与由基团转移聚合法合成的活性聚甲基丙烯酸甲酯(PMMA)进行大分子反应,得到了主链为聚苯乙烯,支链为聚甲基丙烯酸甲酯的接枝共聚物(PStgPMMA);探讨了聚合物的合成条件,GPC测试结果表明,得到的接枝共聚物的分子量和设计分子量相近且主链和支链分子量均可较好的控制.利用扫描电镜、核磁和红外技术对PStgPMMA的形态、结构进行了表征. 相似文献
3.
用苯乙烯-丙烯腈无规共聚物作增容剂改善聚碳酸酯/聚甲基丙烯酸甲酯相容性的研究 总被引:3,自引:0,他引:3
对聚碳酸酯(PC)/苯乙烯 丙烯腈无规共聚物(PSAN)/聚甲基丙烯酸甲酯(PMMA)三元共混物,运用平均场理论,通过二元链段相互作用参数χij计算了其中三个二元对共混组成的相互作用参数χblend,并计算了三元共混体系的spinodal曲线.由此预测了三元共混物相容的条件,讨论了PSAN组成,各聚合物分子量对体系相容性的影响,并进行了实验验证.结果表明通过适当控制共聚组成和分子量,PSAN可以作为PC和PMMA共混物的增容剂,并可以通过仅改变PSAN在共混物中的比例来改善体系的相容性,直至得到完全均相的三元共混物. 相似文献
4.
5.
6.
7.
8.
9.
扩链剂对水性聚氨酯脲与聚甲基丙烯酸甲酯复合体系结构和性能的影响 总被引:15,自引:0,他引:15
分别用乙二胺 (EDA)和水作为扩链剂制备了聚氨酯脲 聚甲基丙烯酸甲酯 (PUA)水分散液 .借助DSC、DMA、FTIR研究了扩链剂对PUA的结构和性能的影响 .结果表明在EDA扩链体系中 ,虽然聚甲基丙烯酸甲酯 (PMMA)和聚酯软段以及扩链剂与异氰酸酯生成的硬段均有一定程度的相容性 ,但由此合成的PUA仍具有多相结构 ;水扩链体系只有一个较宽的二级转变区 ,各相之间有较大程度的混合 .由EDA扩链合成的PUA在耐溶剂、耐水性及拉伸强度等方面优于水扩链体系 .两种扩链剂体系所得PUA的性能差异 ,主要与二者和异氰酸酯反应生成的脲键密度不同 ,导致不同的微相结构有关 相似文献
10.
分别使用苯乙烯 HCl加成物 (a)和 2 氯乙基乙烯基醚 HCl加成物 (b)作为引发剂 ,TiCl4 Ti(OiPr) 4(3∶1mol mol)为活化剂 ,在nBu4NCl存在下 ,- 40℃、CH2 Cl2 中 ,通过顺序活性阳离子聚合 ,合成了 β 蒎烯与苯乙烯、对甲基苯乙烯的嵌段共聚物 .又用带丙烯酰氧功能基的引发剂c [CH3CH (OCH2 CH2 X )Cl,X =OCOC(CH3)CH2 ]引发 β 蒎烯活性阳离子聚合 ,合成了 β 蒎烯大分子单体 .该大分子单体在AIBN引发下与甲基丙烯酸甲酯进行自由基共聚 ,获得主链为聚甲基丙烯酸甲酯、侧链为聚 β 蒎烯的接枝共聚物 相似文献
11.
Menashe Tahan Albert Zilkha 《Journal of polymer science. Part A, Polymer chemistry》1969,7(7):1839-1860
The anionic graft polymerization of methacrylonitrile on potassium starch alkoxide in dimethyl sulfoxide was studied. Factors affecting the graft polymerization such as monomer and alkoxide concentrations as well as temperature were investigated. The yield of the graft polymers was found to increase with alkoxide concentration, and it was possible to incorporate all the starch into graft polymer. On increasing the monomer concentration the graft polymer yield increased to a flat maximum. At the higher monomer concentrations, the efficiency of monomer in giving graft polymer decreased due to increased homopolymer formation. The composition of the graft polymers varied with increasing monomer concentration, graft polymers having about 40–65% of grafted starch were obtained. With increasing temperature (10 to 60°C), the yield of graft polymer decreased, there was more homopolymerization, but the amount of starch incorporated in the graft remained constant. The structure of the graft polymers was deduced from hydrolysis of the starch backbone of the graft polymers by dilute mineral acid and the determination of the molecular weights of the grafted side chains, and from oxidation by periodic acid, which showed the extent of grafting at the secondary hydroxyl groups. These results have shown that by anionic graft polymerization it is possible to obtain graft polymers having more densely packed grafted side chains of relatively low molecular weights than those obtained previously by free-radical graft polymerization. 相似文献
12.
13.
Microstructures assembled by amphiphilic graft copolymers in a selective solvent (poor for the backbone chain and good for graft chains or poor for graft chains and good for the backbone chain) were investigated on the basis of a real-space algorithm of self-consistent field theory in two-dimensions. Circle-like micelles, line-like micelles, large compound micelles, and vesicles are obtained by tailoring the architectural parameters and interaction parameter between the graft blocks and solvents. The aggregate morphology stability regions of graft copolymers as functions of the position of first graft point and the number of branches are constructed. It is found that the architectural parameters play a remarkable role in the complex microstructure formation. The interaction between the graft blocks and solvents is also shown to exert an effect on the morphology stability regions. The distributions of the free end and inner blocks of the backbone are found to be different in various aggregate structures. For the circle-like micelles assembled by graft copolymers with a hydrophobic backbone and vesicles assembled by graft copolymers with a hydrophilic backbone, the free end and inner blocks segregate and localize in different parts of the aggregates depending on their length. However, with respect to the large compound micelles and vesicles assembled by graft copolymers with a hydrophobic backbone, the free end and inner blocks uniformly mix in the clusters. 相似文献
14.
β-环糊精/聚(DL-丙交酯)接枝共聚物的合成与表征 总被引:7,自引:2,他引:7
以β-环糊精(β-CD)为接枝骨架、DL-丙交酯(DLLA)为接枝单体,三乙胺为催化剂,合成了β-环糊精/聚(DL-丙交酯)接枝共聚物(PCDLA).利用IR、1H-NMR、DSC、WXRD和GPC等方法对接枝共聚物的结构进行了表征,测定了共聚物的分子量,并研究了反应投料比对单体转化率(C%)、接枝率(G%)和接枝效率(GE%)的影响.结果表明,在三乙胺催化下,DL-丙交酯与β-环糊精能够发生聚合反应得到接枝共聚物,当DL-丙交酯与β-环糊精结构单元的摩尔比为30∶1,反应时间为10h时,接枝反应的接枝率(G%)和接枝效率(GE%)可分别达到182·9%和21·4%.随着接枝共聚物中β-环糊精含量的增加,共聚物的亲水性得到了改善. 相似文献
15.
对-氯甲基苯乙烯共聚物引发合成接枝共聚物 总被引:3,自引:1,他引:2
接枝共聚物含有性质差别很大的主链和支链,具有许多特殊的性质,因而一直是人们感兴趣的研究课题之一[1~5].原子转移自由基聚合(ATRP)[6,7]的问世,为接枝共聚物的合成提供了一条新的途径.本文用对-氯甲基苯乙烯和其它乙烯基单体自由基共聚. 相似文献
16.
17.
The fixed charge distribution of the ion-exchange membranes was controlled by introducing ion-exchangeable groups onto the glycidyl methacrylate (GMA)-g-polypropylene (PP) membranes. The membranes were prepared by plasma-induced graft polymerization with uniform or nonuniform graft distributions over the cross section. The effects of reaction conditions on the graft distribution in plasma-induced graft polymerization were investigated to obtain the GMA-g-PP membranes with different graft distributions. The examined reaction conditions were plasma power, gas pressure of the plasma, solvent, concentration of the monomer solution, and reaction temperature. The graft distribution of the membranes was directly observed by a microscopic Fourier transform infrared mapping method and field-emission scanning electron microscopy. Also, the graft distribution was correlated with the relative magnitude of the reaction rate to the diffusion rate, which may determine the grafting yield as a function of the distance from the surface. A high rate of diffusion compared to the reaction rate resulted in a more uniform graft distribution. Among the grafting conditions, control of the reaction temperature was found to be the most effective for selectively preparing both uniform and nonuniform graft distribution. Uniform graft distribution was achieved when the reaction was conducted at 1 degrees C because of the relatively rapid diffusion and the slow reaction of the monomer, while nonuniform graft distribution occurred at higher reaction temperatures. Consequently, uniformly and nonuniformly charged cation-exchange membranes were prepared through sulfonation of the corresponding GMA-g-PP membranes at temperatures of 1 and 40 degrees C, respectively. 相似文献
18.
19.
Eliahu Cohen Yair Avny Albert Zilkha 《Journal of polymer science. Part A, Polymer chemistry》1971,9(6):1469-1479
The anionic graft polymerization of propylene sulfide on cellulose membrane was studied. Alkali cellulosates were used to initiate graft polymerization, and graft polymers of high polypropylene sulfide content were obtained in good yields. The graft polymerization was accompanied by a certain extent of homopolymerization. The effects of reaction solvent, monomer concentration, cellulosate degree of substitution, and type of the alkali metal cellulosate on the graft polymer composition, yield, and on the molecular weight of the grafted side chains were investigated. 相似文献
20.
Synthesis and Characterization of CPE-g-GMA Graft Copolymers Obtained by Suspension Copolymerization
Graft of glycidyl methacrylate (GMA) onto solid-state chlorinated polyethylene (CPE) has been performed by suspension copolymerization in a complex dispersion medium which was a compound with H2O, ethyl acetate (EA) and tert-butyl alcohol (TBA). Benzoyl peroxide (BPO) was used as the free radical initiator. The graft level (graft degree and graft efficiency) was calculated gravimetrically, and the graft copolymer was characterized by infrared (IR) spectroscopy, thermogravimetric analysis (TGA) and contact angle study. The effects of reaction conditions on graft level, including chemical parameters (the concentration of monomer, initiator, and interfacial agent) and processing parameters (reaction time and temperature), have been investigated in detail. The experimental results showed that GMA could be grafted onto the chain of CPE with comparative higher graft degree, which could reach 37% with graft efficiency above 80%. 相似文献