新型“蜈蚣形”苯乙烯-甲基丙烯酸甲酯共聚物的合成

结合活性阴离子聚合和原子转移自由基聚合(ATRP)合成了结构清楚的A2B型“蜈蚣形”苯乙烯-甲基丙烯酸甲酯共聚物(PS-PS-PMMA). 合成路线包括含1, 1-二苯基乙烯(DPE)侧基的聚苯乙烯(PS)主链与活性聚苯乙烯基锂的偶联反应和产生的1, 1-二苯基甲基阴离子引发聚合甲基丙烯酸甲酯的反应, 其中, 主链PS通过ATRP和Wittig反应制得. 通过1H NMR, IR, SEC, SLS和 DSC等方法对所得“蜈蚣形”共聚物进行了表征.     

基团转移活性聚合物的接枝共聚

以阴离子聚合法合成的窄分布聚苯乙烯（ＮＤＰＳ）进行氯甲基化后,再与由基团转移聚合法合成的活性聚甲基丙烯酸甲酯（ＰＭＭＡ）进行大分子反应,得到了主链为聚苯乙烯,支链为聚甲基丙烯酸甲酯的接枝共聚物（ＰＳｔｇＰＭＭＡ）;探讨了聚合物的合成条件,ＧＰＣ测试结果表明,得到的接枝共聚物的分子量和设计分子量相近且主链和支链分子量均可较好的控制．利用扫描电镜、核磁和红外技术对ＰＳｔｇＰＭＭＡ的形态、结构进行了表征．     

活性聚甲基丙烯酸甲酯活性链和溴甲基化聚苯乙烯偶合反应制备接枝共聚物

采用基团转移聚合、阴离子聚合以及高分子偶合反应的方法，合成了一种结构明确、链长均匀、分子量可控的聚苯乙烯接枝聚甲基丙烯酸甲酯。主链聚苯乙烯由阴离子聚合得到，并进行溴甲基化。支链活性聚甲基丙烯酸甲酯由基团转移聚合制备。经偶合反应后得到分子量为３×１０４～７×１０４、多分散性指数Ｄ为１．２～１．４的接枝共聚物。用１ＨＮＭＲ，ＧＰＣ和ＤＳＣ表征接枝产物。和均聚物相比，共聚物的玻璃化温度较低。     

活性聚甲基丙烯酸甲酯和溴甲基化聚苯乙烯偶合反应制备接枝共聚物

采用基团转移聚合、阴离子聚合以及高分子偶合反应的方法,合成了一种结构明确、链长均匀和分子量可控的聚苯乙烯接枝聚甲基丙烯酸甲酯。主链聚苯乙烯由阴离子聚合得到,并进行溴甲基化。支链活性聚甲基丙烯酸甲酯由基团转移聚合制备。经偶合反应后得到分子量为3×10⁴～7×10⁴、多分散性指数D为1.2～1.4的接枝共聚物。溴甲基化聚苯乙烯和活性聚甲基丙烯酸甲酯的偶合反应活性随分子量的增大而降低,理想的反应温度为-20℃。用¹HNMR、GPC和DSC表征接枝产物。和均聚物相比,共聚物的玻璃化温度较低。     

末端为噻吩基的聚苯乙烯大分子单体的合成及其氧化偶联聚合

以丁基锂为引发剂、四氢呋喃为溶剂 ,在氮气气氛和 - 78℃下进行苯乙烯 (ST)阴离子聚合 ,并加入 3 溴噻吩作为终止剂 ,从而合成出末端含噻吩基的聚苯乙烯 (PST Thp) ,它可以进行氧化偶联聚合 ,是一类新的大分子单体 .在无水三氯化铁作用下 ,PST Thp可以进行均聚反应或与噻吩进行共聚反应 ,共聚反应生成主链刚性、支链分子量分布窄的聚 (噻吩 接枝 苯乙烯 ) (PThp g ST) ,凝胶渗透色谱、红外光谱和吸收光谱证实接枝共聚物的生成     

阴离子嵌段共聚的交联聚苯乙烯的网络链长多分散性与网络结构非均一性

用链长分布不同的活性聚苯乙烯子聚物与二乙烯基苯进行阴离子嵌段共聚,合成了一系列两相模型交联网络。以作者等提出的方法测定了所合成网络的结构非均一因子Z。实验测定的网络结构非均一因子Z与交联前聚苯乙烯活性链的分子量分布宽度指数d之间有平行的相应变化规律,表明所给予的非均一因子Z的物理意义是合理的。同时说明,子聚物链长分布较宽时,在网络的高交联区中除了二乙烯基苯外,还有一些对溶胀无贡献的子聚物以悬挂链的形式存在。     

聚苯乙烯-聚甲基丙烯酸缩水甘油酯嵌段共聚物的合成与表征

在常压、惰性气体保护下,以正丁基锂引发苯乙烯进行阴离子聚合,并用少量甲基丙烯酸缩水甘油酯(GMA)进行终端共聚,制得了侧基含有环氧基团的聚苯乙烯-聚甲基丙烯酸缩水甘油酯嵌段共聚物.用GPC、FT-IR、1H-NMR及盐酸-二氧六环银量法对共聚物进行了分析,并考察了GMA用量、终端共聚的反应温度及时间对环氧侧基数量的影响.结果表明:在少量四氢呋喃和氯化锂的存在下,1,1-二苯基乙烯(DPE)"盖帽"的聚苯乙烯阴离子活性种在甲苯溶剂中可引发GMA单体聚合反应,所得聚合物分子链中环氧侧基数量可根据需要进行调节.适宜的终端共聚反应温度和时间分别为-65℃和0.5 min.     

聚(苯乙烯-ε-己内酯)嵌段共聚物的研究

本文采用活性阴离子聚合方法合成聚(苯乙烯-ε-己内酯)嵌段共聚物。研究了聚合反应条件,并用GPC、柱上溶解分级及红外光谱进行表征。对产物进行结构分析,产物为聚(苯乙烯-ε-己内酯)嵌段共聚物,具有多相结构,是由无定形聚苯乙烯链段、无定形聚-ε-己内酯链段和结晶型聚-ε-己内酯链段组成的嵌段共聚物。对该嵌段共聚物的性能进行了测试。     

哑铃状富勒烯C70-聚苯乙烯高分子衍生物的合成与表征

通过由萘钠引发得到的聚苯乙烯"活性"双阴离子与C70的反应,合成了哑铃状C70-聚苯乙烯高分子衍生物.产物经UV-Vis,FTIR,GPC,1HNMR,13CNMR,SEM,XRD,TGA和DSC等方法进行表征.GPC测得C70-PS衍生物与其母体PS具有相近的分子量.TGA分析表明,得到C70的含量接近PS链两端各键合一个C70分子,形成线型的哑铃状结构.     

扫描探针显微技术研究聚苯乙烯单链颗粒的力学响应

首先通过极稀溶液滴膜的方法得到了聚苯乙烯的单链颗粒 .之后 ,采用稍浓溶液得到了既有单链聚苯乙烯颗粒又有多链 (上千根 )聚苯乙烯颗粒的样品 .力调制技术显示单链聚苯乙烯颗粒比多链聚苯乙烯颗粒软 ;另一方面 ,对多链聚苯乙烯颗粒和聚苯乙烯本体的纳米压印实验结果表明二者的模量是近似的 .因此 ,可以得出单链聚苯乙烯颗粒比本体聚苯乙烯软 ,这说明存在于聚苯乙烯单链颗粒中的分子链内的缠结点密度不如存在于本体中的分子链间的缠结点密度大     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.