绿色聚天冬氨酸复配缓蚀剂对A3碳钢的缓蚀抑雾作用

采用失重法和极化曲线法研究了聚天冬氨酸(PASP)和十二烷基酚聚氧乙烯醚(OP-10)复配对A3碳钢在6mol·L-1HCl腐蚀介质中的协同吸附行为及缓蚀抑雾作用.结果表明:复配缓蚀剂可有效抑制A3碳钢在HC1介质中的腐蚀,当PASP浓度为20g·L-1,缓蚀率可达94%,抑雾率83%;随着温度的升高,复配缓蚀剂的缓蚀性能下降.复合缓蚀剂在钢表面的吸附符合校正的Langmuir模型,吸附过程为放热、熵减的自发过程;复配体系属于阳极型缓蚀剂.     

硫酸溶液中聚天冬氨酸对碳钢的吸附缓蚀性能

应用电化学极化曲线和交流阻抗研究聚天冬氨酸(PASP)对碳钢的缓蚀性能,讨论了PASP浓度和温度对缓蚀效果的影响.结果表明:PASP是一种以抑制阳极为主的缓蚀剂.在实验温度范围内,PASP在0.5mol/L硫酸溶液中对碳钢的缓蚀效率随着温度升高而降低,并以10℃时的缓蚀效果最好.在给定温度下,缓蚀率均随PASP浓度的增加而迅速增加,但当PASP质量浓度达到2.5g/L时,缓蚀率的增加趋于平缓,10℃下,缓蚀率的最高值可达80.33%(PASP 6.0g/L),PASP在碳钢表面的吸附基本服从Freund lich吸附等温式,PASP的加入增大了碳钢的腐蚀反应表观活化能.     

L-蛋氨酸对预腐蚀Q235碳钢缓蚀性能的分子动力学研究

采用失重法、密度泛函理论和分子动力学模拟研究了预腐蚀对L-蛋氨酸在60℃、1M的HCl溶液中对Q235碳钢的影响和缓蚀剂的缓蚀机理。结果表明:预腐蚀作用降低了L-蛋氨酸对Q235碳钢缓蚀作用,缓蚀率下降15%。密度泛函理论和分子动力学模拟结果表明,羧基上的氧原子带有明显的负电荷能够吸附到金属表面形成缓蚀剂膜,发挥缓蚀作用,为成膜缓蚀机理。L-蛋氨酸在没有预腐蚀的Q235碳钢表面吸附分子数为24时,缓蚀剂膜最致密。而L-蛋氨酸在预腐蚀后的Q235碳钢表面吸附时的吸附能显著降低,缓蚀剂在碳钢表面的分布密度也明显下降,这很好解释了预腐蚀作用降低了缓蚀剂缓蚀率的实验结果。本文的研究结果对缓蚀剂的研究和实际应用具有一定的指导意义。     

聚天冬氨酸与钨酸钠复配对白铜B10的缓蚀作用

应用光电化学的方法研究了两种环境友好型缓蚀剂聚冬天氨酸(PASP)和钨酸钠(Na2WO4)的单一配方及其复配对白铜B10在硼砂-硼酸缓冲溶液中的缓蚀作用援研究表明, 在光电流循环伏安测试中, 单一的PASP与Na2WO4均能够使B10表面Cu2O膜引起的p型光电流响应增大, 这说明缓蚀剂增大了Cu2O膜的厚度, 使B10的腐蚀速率减小. 单一的PASP与Na2WO4的最佳添加浓度分别为3和5 mg·L-1, 单一的Na2WO4比单一的PASP使p型光电流响应增大趋势更大. 若以总浓度为5 mg·L-1时对两者进行复配, 当PASP与Na2WO4的质量浓度比为1:1和1:3时, 两者复配比单一使用时的p型电流光响应都更大, B10的腐蚀更小, 即缓蚀剂的效果更好. 交流阻抗测试结果与光电化学测试相一致.     

新型不对称双季铵盐缓蚀剂在HCl中对Q235钢的缓蚀行为

采用静态失重法、极化曲线法和交流阻抗法研究了自制的含咪唑啉环不对称双季铵盐缓蚀剂(DBA)在1 mol•L^－1 HCl介质中对Q235钢的缓蚀性能, 并探讨了其在Q235钢表面的吸附行为. 结果表明, 缓蚀效率随DBA浓度增加而增大, 在25～55 ℃的实验温度范围内, 浓度为2.89×10^－4 mol•L^－1时, 缓蚀效率均在90%以上, 且缓蚀效率随温度升高而增大. 极化曲线测试显示DBA是一种阴极抑制为主的混合型缓蚀剂. 缓蚀剂在Q235钢表面的吸附过程为吸热过程, 其在Q235钢表面的吸附遵循Langmuir等温式, 属于化学吸附. 最后采用量子化学方法对DBA的缓蚀机理做了进一步分析.     

分子结构对咪唑啉缓蚀剂膜在Q235钢表面生长和衰减规律的影响

采用弱极化法、电化学阻抗谱等手段研究了烷基咪唑啉和硫脲基烷基咪唑啉缓蚀剂对Q235钢在饱和CO2盐溶液中的缓蚀行为变化, 探讨了吸附膜的形成与衰减规律. 结果表明, 烷基咪唑啉和硫脲基烷基咪唑啉缓蚀剂都是以控制阳极过程为主的混合界面型缓蚀剂. 在85 ℃下, 烷基咪唑啉成膜相对较慢, 吸附能力较弱, 容易发生脱附; 而硫脲基的引入, 使得硫脲基烷基咪唑啉缓蚀剂溶液存在自动修复能力, 增强了咪唑啉环的吸附性能, 提高了缓蚀剂的缓蚀性能; 硫脲基烷基咪唑啉水解开环后, 成膜性能下降, 膜寿命和缓蚀效率也大大降低. 最后采用量子化学计算对上述结论进行了验证和解释.     

3-氨基-1,2,4-三氮唑和Na_2WO_4复合缓蚀剂对黄铜的缓蚀协同作用

应用交流阻抗和极化曲线测试3-氨基-1,2,4-三氮唑(ATA)和钨酸钠复合缓蚀剂对黄铜在3%NaCl溶液中的缓蚀作用.结果表明,ATA对黄铜有缓蚀作用,并以7.5 mg.L-1ATA的缓蚀效果最好,缓蚀率为87.46%,以7.5 mg.L-1ATA和0.15 mg.L-1Na2WO4配成复合缓蚀剂则对黄铜具有很好缓蚀协同效应,缓蚀效率达91.82%,属阴极型缓蚀剂.     

O,O'-二(苯基)二硫代磷酸-N,N-二乙铵对Q235钢在硫酸溶液中的缓蚀性能研究

合成了O,O'-二(苯基)二硫代磷酸-N,N-二乙铵(DEDDP),采用失重,电化学和SEM技术共同研究了DEDDP在H2SO4溶液中对Q235钢的缓蚀性能。失重法研究表明:DEDDP在H2SO4溶液中能有效地抑制Q235钢腐蚀,25℃的5%H2SO4溶液中,DEDDP浓度为160 mg.L-1时,其缓蚀率为94.67%;电化学研究结果表明:DEDDP在5%H2SO4溶液中属混合型缓蚀剂。同时,研究了温度,H2SO4浓度和浸泡时间对缓蚀率的影响。吸附规律研究表明:DEDDP在Q235钢表面的吸附符合Langmuir吸附等温式,其吸附自由能为-32.32kJ/mol,吸附为自发进行的物理和化学吸附。     

HCl溶液中1,2-二(苯并咪唑-2-硫基)乙烷对碳钢的缓蚀行为研究

合成了缓蚀剂1,2-二(苯并咪唑-2-硫基)乙烷((bit)_2E),用元素分析、红外光谱、核磁共振谱和液质联用技术确证了缓蚀剂的分子结构。用静态失重法、动电位极化曲线法和扫描电子显微镜评价了(bit)_2E在HCl溶液中对碳钢的缓蚀性能。结果表明(bit)_2E是一种混合型缓蚀剂,缓蚀率随缓蚀剂浓度增加而增大,随HCl浓度增大而减小,受腐蚀体系温度和放置时间影响较小。在30℃的1.0 mol·L~(-1)HCl溶液中,(bit)_2E浓度为1.0×10~(-3)mol·L~(-1)时的缓蚀率为95.68%。(bit)_2E作为新型缓蚀剂在碳钢表面上的吸附符合Langmuir吸附等温方程式,属于自发进行的物理和化学吸附。     

十二烷基苯磺酸钠在AZ31镁合金表面的吸附及其缓蚀作用

采用电化学阻抗谱(EIS)和极化曲线研究十二烷基苯磺酸钠(SDBS)对AZ31镁合金在3.5%(w, 质量分数)NaCl腐蚀介质中的吸附行为及缓蚀作用. 结果表明: SDBS可有效抑制AZ31镁合金在NaCl介质中的腐蚀, 其浓度为0.008 mol·L-1时缓蚀效率可达90%以上; 升高温度并不利于提高SDBS的缓蚀效率. SDBS在AZ31镁合金表面主要发生物理吸附, 吸附过程为放热、熵增的自发过程, 近似符合Langmuir单分子层吸附模型; SDBS为混合抑制型缓蚀剂, 但主要抑制阳极反应.     

Synthesis of polyaspartic acid-glycidyl adduct and evaluation of its scale inhibition performance and corrosion inhibition capacity for Q235 steel applications

In this work, the development of the eco-friendly comprehensive scale and corrosion inhibitor based on green polyaspartic acid (PASP) was presented. In this view, PASPG was prepared by a ring-opening graft modification reaction of polysuccinimide (PSI) with glycidyl. In addition, the molecular structure and the thermal stability of PASPG were characterized by using three different methods (FTIR, ¹H NMR, and TGA). PASPG’s scale inhibition efficiency and corrosion inhibition efficiency were also evaluated, respectively. More concretely, the scale inhibition efficiency of PASPG achieved 94.6 % and 95.1 % for CaCO₃ and CaSO₄, respectively. With the aid of the FTIR and SEM measurement techniques, it was found that PASPG could induce the irregular growth of the CaCO₃ and CaSO₄ morphology and destroy the formation of crystals. On the other hand, the higher corrosion efficiency of 85.17 % was achieved by PASPG in comparison with PASP (72.53 %). PASPG is a mixed inhibitor and the adsorption of PASPG on the Q235 steel surface followed the Langmuir mono-layer adsorption isotherm. The formation of a protective film on the surface of carbon steel was proved by PASPG’s adsorption, which increased the resistance to be eroded. Thus, the surface of carbon steel can be effectively protected. The present work provides a simple and effective pathway for the synthesis of high-efficiency green scale and corrosion inhibitor, by introducing a functional group into the PASP chains. The implementation of such type of chemical modification method may also be an effective strategy for improving the efficiency of other polymers green scale and corrosion inhibitors.     

SERS技术对聚天冬氨酸缓蚀性能的研究

SERS技术对聚天冬氨酸缓蚀性能的研究;缓蚀作用;表面增强拉曼散射     

环保型阻垢剂对水垢的抑制及其相互作用模拟

为解决聚天冬氨酸(PASP)在高钙离子质量浓度下阻垢效果不佳及分散氧化铁效果差的问题,通过对中间体聚琥珀酰亚胺(PSI)开环改性将酪氨酸(Tyr)接枝到PASP的侧链,合成了具有羧基、氨基、酰胺基、酚羟基等多种功能性官能团的环保型阻垢剂——酪氨酸/聚天冬氨酸共聚物(Tyr-PASP)。 静态阻垢实验表明Tyr-PASP对水垢的抑制能力明显优于PASP。 当n(Tyr):n(PSI)=1:1时,Tyr-PASP对CaCO₃表现出最佳的抑制效果,且质量浓度为4 mg/L时阻垢效率达到了100%,在5 mg/L时,对CaSO₄的抑制效率也达到100%。 添加Tyr-PASP后,水垢晶形从稳定的方解石和文石变成了不稳定的球霰石,形貌也变得松散。 分子动力学模拟表明,Tyr-PASP和方解石之间的相互作用是放热的,并且远高于传统的吸附能,静电力在Tyr/PASP和方解石之间的结合中起主要作用。 此外,Tyr-PASP对氧化铁的分散效果显著提高。     

辛烷基二甲基苄基季铵盐离子液体对Q235钢的缓蚀性能

利用失重分析、 极化曲线、 电化学阻抗谱和扫描电子显微镜等研究了辛烷基二甲基苄基季铵盐离子液体(ODBA)对1 mol/L盐酸溶液中Q235钢的缓蚀性能, 并分析了其在Q235钢表面的吸附行为. 失重分析结果表明, 随着ODBA浓度的增加, 缓蚀效率逐渐提高, 在ODBA质量浓度为0.2 g/L、 温度为30 ℃时, 缓蚀效率可达95.53%; 电化学测试结果与失重分析结果一致; 热力学研究结果表明, ODBA在碳钢表面的吸附是放热过程, 且遵循Langmuir吸附等温线, 是以化学吸附为主的混合型吸附; 同步热分析测试表明ODBA具有良好的热稳定性.     

Preparation of poly(naphthylamine-formaldehyde); Application as a new and an effective inhibitor of steel in hydrochloride acid solution

In this research, we first prepared poly (naphthylamine-formaldehyde) (PNAF) and then investigated its corrosion inhibition properties for polished steel specimens in 1 M HCl solution using chemical and electrochemical methods. Results showed that the PNAF could serve as an effective inhibitor of the corrosion of steel in hydrochloric acid media (the inhibition efficiency of this polymer at an optimum concentration of 100 mg L^–1 was 99.9 %). The effect of temperatures on the corrosion behavior of steel was studied in the temperature ranging from 303 to 333 K for 1 M HCl at an optimum concentration of PNAF. It has been demonstrated that the adsorption behavior of this polymer on steel in 1 M HCl was found to obey Langmuir adsorption isotherm. Also, potentiodynamic polarization measurements showed that PNAF was a mixed type inhibitor.     

Adsorption and inhibition properties of Tephrosia Purpurea as corrosion inhibitor for mild steel in sulphuric acid solution

Abstract

The present study investigated the adsorption and inhibition behavior of leaf extract of Tephrosia Purpurea (T. purpurea) on mild steel corrosion in 1?N H₂SO₄ solution using electrochemical and surface morphological methods. Techniques adopted for electrochemical studies were Potentiodynamic Polarization and Electrochemical Impedance Spectroscopy (EIS) technique; and surface morphological studies were carried out using Scanning Electron Microscopy (SEM), and Atomic Force Microscopy (AFM). The leaf extract of T. purpurea was characterized using UV-Visible spectroscopy (UV-Vis), Fourier-Transform Infrared Spectroscopy (FT-IR), Nuclear Magnetic Resonance Spectroscopy (NMR) and Gas Chromatography – Mass Spectrometry (GCMS). The results obtained from electrochemical studies exhibited the potential of T. purpurea as good corrosion inhibitor. And, it was found that, the inhibition efficiency (I.E in %) increases with increase in concentration of the inhibitor molecules, the optimum inhibitor concentration observed was 300?ppm and the inhibition efficiency of 93% was observed at this inhibitor concentration. Above 300?ppm, there was not much changes in inhibition efficiency. Polarization studies provided the information that the inhibition is of mixed type and EIS confirmed that the corrosion process is controlled by single charge transfer mechanism. And, it was obtained that, the adsorption of inhibitor molecules obeys Langmuir adsorption isotherm. The inhibition is mainly by the adsorption of inhibitor molecules on the mild steel electrode surface, which was confirmed by FT-IR, SEM and AFM studies. Through all the experimental results, it can be arrived that, the leaf extract of T. purpurea performed as a good corrosion inhibitor for mild steel in 1?N sulfuric acid medium.     

Schiff’s base derived from the pharmaceutical drug Dapsone (DS) as a new and effective corrosion inhibitor for mild steel in hydrochloric acid

The inhibition ability of Dapsone’s Schiff’s base with salicylaldehyde (1:2) for mild steel corrosion in 1 M HCl solution at 308 K was studied by means of potentiodynamic polarization, electrochemical impedance spectroscopy techniques, and gravimetric analysis. Results showed that Dapsone salicylaldehyde performed well as a good inhibitor for mild steel in 1 M HCl solution with maximum inhibition efficiency of 95 % at 500 ppm. The adsorption isotherm of the inhibitor followed the Langmuir adsorption. The value of free energy of adsorption showed that it is a spontaneous process and followed typical physical adsorption.     

3-氨基-1,2,4-三氮唑对铜的缓蚀性能和吸附行为

采用电化学和表面增强拉曼光谱(SERS)方法研究了新型环境友好型金属水处理剂3-氨基-1,2,4-三氮唑(ATA)对铜在3% NaCl溶液中的缓蚀性能和吸附行为. 结果表明, ATA对铜有较好的缓蚀作用, 其中ATA浓度为0.24 mmol·L-1时对铜的缓蚀效率最高, 为97.65%, 其吸附行为符合Langmuir吸附等温式, 吸附机理是典型的化学吸附援SERS表明, ATA分子通过很强的吸附于铜表面达到抑制其腐蚀的作用, 是ATA-与Cu+形成配合物来阻止氯离子化合物(CuCl-2)的生成.