中空分级结构Fe3O4@C/rGO复合材料的合成及其储锂性能

以氧化石墨烯(GO)为基底,Fe(NO_3)_3·9H_2O、异丙醇、甘油为原料,通过溶剂热法和后续热处理过程2步合成了Fe_3O_4@C/rGO复合材料,实现了碳包覆的Fe_3O_4纳米粒子自组装形成的分级结构空心球在氧化石墨烯片上的原位生长。采用X射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)和恒流充放电等手段分析了材料的物理化学性能与储锂性能。结果表明,该复合材料在5.0 A·g~(-1)的电流密度下,仍有437.7 mAh·g~(-1)的可逆容量,在1.0 A·g~(-1)下循环200圈后还有587.3 mAh·g~(-1)的放电比容量。这主要归因于还原态氧化石墨烯(rGO)对碳包覆Fe_3O_4分级空心球整体结构稳定性和导电性的提高。     

GO/ZIF-67模板制备rGO/NiCo2S4及高性能不对称超级电容器

以氧化石墨烯(GO)为基底,在GO表面原位生长ZIF-67并作为模板,经硝酸镍刻蚀、碳化、水热硫化制得rGO/NiCo_2S_4复合材料。采用X射线衍射(XRD)、扫描电子显微镜(SEM)、X射线光电子能谱(XPS)表征复合材料的结构与形貌。随后将rGO/NiCo_2S_4复合材料制成正极材料,测试其电化学性能,测试结果显示:rGO/NiCo_2S_4-1.5 h电极材料在1 A·g~(-1)的电流密度下,其比电容值高达1 577 F·g~(-1),当电流密度达到10 A·g~(-1)时,倍率性能为86.4%,在10 A·g~(-1)的电流密度下循环2 000次后,电容保持率为76.9%。另外,在6 mol·L-1KOH电解液中,由AC//rGO/NiCo_2S_4-1.5 h组成的不对称电容器在功率密度为723 W·kg~(-1)时,能量密度为33 Wh·kg~(-1);在高功率密度为7 277 W·kg~(-1)时,能量密度仍保持为23 Wh·kg~(-1)。     

泡沫镍负载Fe2O3@Ni3S2纳米线网状结构电极的制备及其电催化析氧性能

通过两步水热法制备泡沫镍(NF)负载Fe_2O_3纳米粒子@Ni_3S_2纳米线网状结构电极(Fe_2O_3@Ni_3S_2/NF)。运用X射线衍射(XRD)、X射线光电子能谱(XPS)、透射电子显微镜(TEM)、N_2吸附-脱附测试等方法对电极材料的物相和微观结构特征等进行了表征。水热条件下原位表面化学刻蚀生成的Ni_3S_2纳米线与三维多孔NF基体间拥有强结合力和低界面电阻,Fe_2O_3粒子均匀分布在纳米线的表面。在1 mol·L~(-1)的KOH溶液中,运用线性扫描伏安测试(LSV)、计时电位法、电化学交流阻抗测试(EIS)等对电极的电催化析氧(OER)性能进行了测试。结果表明:在100 mA·cm~(-2)的超高电流密度下,Fe_2O_3@Ni_3S_2/NF电极的OER过电势仅为223 mV,比Ni_3S_2/NF材料的过电势降低了285 mV;经过10 h计时电位测试,性能保持率高达80%。     

石墨烯助剂与Ni(Ⅱ)活性位点协同增强TiO_2制氢性能

采用水热法和低温浸渍法制备了电子助剂还原石墨烯(rGO)和界面活性位点Ni(Ⅱ)共修饰的高效TiO_2光催化剂(简称Ni(Ⅱ)/TiO_2-rGO)。制氢性能测试结果表明:相比于TiO_2和单独还原石墨烯复合的TiO_2,经还原石墨烯与Ni(Ⅱ)协同修饰后的TiO_2表现出更高的光催化制氢性能。其中,Ni(Ⅱ)/TiO_2-rGO(0.1 mol·L-1)具有最高制氢性能,制氢速率达到77.0μmol·h-1,分别是TiO_2(16.4μmol·h-1)和TiO_2-rGO(28.0μmol·h-1)的4.70倍和2.75倍。还原石墨烯助剂与Ni(Ⅱ)活性位点协同增强制氢性能的原理是:还原石墨烯作为电子助剂可以快速捕获和传输电子,Ni(Ⅱ)作为界面活性位点可以从溶液中捕获H+,提高界面反应速率,2种助剂协同作用加快了TiO_2上的光生电子-空穴对的有效分离。     

无定型钼硫化物/还原氧化石墨烯的辐射合成及其电催化析氢性能

钼硫化物被认为是一种高效的电催化析氢反应的催化剂,因此其合成方法受到了广泛的研究和关注。本文以四硫代钼酸铵和氧化石墨为前驱体,利用γ射线对其辐照还原,一步法制备了钼硫化物/还原氧化石墨烯(Mo S_x/RGO)复合材料。通过X射线光电子能谱、X射线衍射、透射电子显微镜、Raman光谱等表征手段确认复合材料中的Mo Sx为无定型结构,且氧化石墨烯得到了有效的还原。同时系统研究了吸收剂量、前驱体配比对复合材料作为析氢反应催化剂性能的影响。结果发现,Mo Sx/RGO复合材料具有优异的催化性能,其催化起始电压为110 m V,在电流密度为10 m A·cm~(-2)时过电势仅为160 m V,Tafel斜率为46 m V·dec~(-1),说明该催化剂催化析氢机理为Volmer-Heyrovesy机理。此外,Mo Sx/RGO复合材料还具有良好的催化稳定性。     

经由[Ni(en)_3](SeO_3)配合物电镀制备的硒化镍高效电催化水分解反应（英文）

电催化水分解是一种高效制备清洁氢气能源的有效方法.开发高效、稳定、廉价、双功能的电催化剂用于水的氧化与还原反应一直以来都是具有挑战的课题.在这篇论文中,作者报道了一种生长在碳布上高活性的硒化镍微球.该催化剂通过对同时包含镍和硒元素的亚硒酸镍配合物进行电解制备.由于前驱分子同时含有两种有效元素,制备得到的硒化镍具有很好的形貌和元素分步均一性.制备得到的NiS e-EA/CC电极能够双功能催化水的氧化与还原.在154 mV析氢过电势下能达到10 mA·cm~(-2)的催化电流.同时,在250 mV析氧过电势下能达到20mA·cm~(-2)电催化电流.用该电极材料同时作为阴极和阳极制备的全电解水电解池能在1.53 V的电压下实现10mA·cm~(-2)的稳定电解电流.     

氧化石墨烯片层大小对其修饰电极探测汞离子的影响

研究了石墨烯衍生物片层尺寸对Hg~(2+)检测的影响。通过超声制得片层大小不同的氧化石墨烯(GO),利用循环伏安法电化学还原得到相应的还原氧化石墨烯(rGO),然后利用循环伏安法研究了rGO/玻碳电极(GCE)和L-半胱氨酸(L-cys)/rGO/GCE两种修饰电极对于Hg~(2+)的响应,以及不同片层大小氧化石墨烯对应的rGO/GCE和L-cys/rGO/GCE修饰电极对于Hg2+响应的不同。     

高效析氧电催化剂Co3O4@NiMn-LDH异质结构阵列的制备

我们合理设计和制备了一种新型的高性能析氧电催化剂——泡沫镍负载Co_3O_4@NiMn-LDH(层状双金属氢氧化物)三维异质结构阵列(Co_3O_4@NiMn-LDH/NF)。这种基于泡沫镍基底的三维异质结构催化剂经简单的两步水热反应即可制得。对比Co_3O_4、NiMn-LDH及传统RuO2催化剂,所制备的Co_3O_4@NiMn-LDH/NF催化剂展示出更优异的电催化析氧性能。在1 mol·L~(-1)KOH溶液中,电流密度为50 mA·cm~(-2)时的过电势仅为282 mV,塔菲尔斜率为64 mV·dec~(-1)。通过有效的界面工程设计,使异质结构陈列Co_3O_4@NiMn-LDH发挥出Co_3O_4和NiMn-LDH各自优异的电催化性能。其中,基于泡沫镍基底生长的活性组分Co_3O_4纳米线阵列作为中间核支撑结构,保持了良好的空隙率,不仅有利于暴露更多的活性位点,而且有利于电解液的扩散和气体产物的释放;而依附于Co_3O_4纳米线阵列上的NiMn-LDH异质结构纳米片层则富有更多的亲水性基团,使得活性位点更易与水结合,从而促进氧析出反应的进行。     

负载硫化钴纳米颗粒的N、S共掺杂石墨烯氧还原电催化剂的制备及性能

采用D-氨基葡萄糖作为Co分散剂和碳源,硫脲作为氮源和硫源,以NaCl为模板制备负载硫化钴纳米颗粒的N、S共掺杂三维石墨烯氧还原电催化剂(CoS/N/S/rGO)。CoS/N/S/rGO具有良好的氧还原反应(ORR)活性,起始电位和半波电位分别为960和815 mV,性能与商业Pt/C相当。此外,CoS/N/S/rGO表现出明显的4电子转移特性和超低的过氧化氢产率。与基于Pt/C的锌-空气电池相比,基于CoS/N/S/rGO的锌-空气电池在6 mol·L~(-1) KOH和0.2 mol~(-1) Zn(CH_3COO)_2碱性电解质中显示出更高的恒电流放电性能以及更好的稳定性。     

二氧化锰/石墨烯/N-取代羧基聚苯胺复合修饰电极对亚硝酸根的电化学催化研究

采用电聚合、静电吸附和恒电位还原的方法在玻碳电极上制备了均匀修饰的还原氧化石墨烯/N-取代羧酸聚苯胺(rGO/NPAN)复合膜。以其为支撑,利用滴涂法将高电催化活性的二氧化锰负载于复合膜上,形成MnO_2/rGO/NPAN复合修饰电极。通过扫描电镜(SEM)对复合膜的形貌进行表征,讨论了NPAN电聚合圈数、GO浓度、电还原时间和pH值等因素对电化学活性和电催化活性的影响。结果表明:该修饰电极具有低的检测电位和高的电化学响应,检测亚硝酸根的浓度范围为0.5×10~(-6)~5.13×10~(-2)mol/L,灵敏度为14.075μA·(mmol/L)~(-1),检出限(S/N=3)低至0.2μmol/L。     

Li_(1.3)Ti_(1.7)Al_(0.3)(PO_4)_3,Na_(1.3)Ti_(1.7)Al_(0.3)(PO_4)_3的离子交换研究

研究了在不同温度下的NaNO3和AgNO3水溶液中Li1.3Ti1.7Al0.3(PO4)3和Na1.3Ti1.7Al0.3(PO4)3离子交换行为.实验表明Li1.3Ti1.7Al0.3(PO4)3和Na1.3Ti1.7Al0.3(PO4)3均显示出了高选择性与Na+和Ag+进行离子交换的特征,且对Ag+的选择性高于Na+.升高温度可显著提高Ag/Li和Ag/Na的交换反应速度.     

Crystal growth, structure determination, and optical properties of new potassium-rare-earth silicates K3RESi2O7 (RE=Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu)

Single crystals of K₃RESi₂O₇ (RE=Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu) were grown from a potassium fluoride flux. Two different structure types were found for this series. Silicates containing the larger rare earths, RE=Gd, Tb, Dy, Ho, Er, Tm, Yb crystallize in a structure K₃RESi₂O₇ that contains the rare-earth cation in both a slightly distorted octahedral and an ideal trigonal prismatic coordination environment, while in K₃LuSi₂O₇, containing the smallest of the rare earths, lutetium is found solely in an octahedral coordination environment. The structure of K₃LuSi₂O₇ crystallizes in space group P6₃/mmc with a=5.71160(10) Å and c=13.8883(6) Å. The structures containing the remaining rare earths crystallize in the space group P6₃/mcm with the lattice parameters of a=9.9359(2) Å, c=14.4295(4) Å, (K₃GdSi₂O₇); a=9.88730(10) Å, c=14.3856(3) Å, (K₃TbSi₂O₇); a=9.8673(2) Å, c=14.3572(4) Å, (K₃DySi₂O₇); a=9.8408(3) Å, c=14.3206(6) Å, (K₃HoSi₂O₇); a=9.82120(10) Å, c=14.2986(2) Å, (K₃ErSi₂O₇); a=9.80200(10) Å, c=14.2863(4) Å, (K₃TmSi₂O₇); a=9.78190(10) Å, c=14.2401(3) Å, (K₃YbSi₂O₇). The optical properties of the silicates were investigated and K₃TbSi₂O₇ was found to fluoresce in the visible.     

B2O3-Bi2O3-ZnO-Al2O3玻璃助烧剂对BaTiO3陶瓷烧结条件、晶体结构和介电性能的影响

通过调节B₂O₃-Bi₂O₃-ZnO-Al₂O₃(BBZA)玻璃的添加量研究其对钛酸钡(BaTiO₃)陶瓷烧结条件、晶体结构和介电性能的影响。结果表明：添加适量的BBZA玻璃能够有效地将BaTiO₃陶瓷烧结温度由1 350℃降至950℃,并使其致密化。同时,添加BBZA玻璃后,BaTiO₃的晶体结构随着烧结温度的升高而发生转变(立方相→四方相)。另外,BBZA玻璃的引入使BaTiO₃陶瓷的居里峰得到了有效的抑制和拓宽。陶瓷微观形貌显示,玻璃相均匀分布在BaTiO₃晶粒表面。优化的BaTiO₃陶瓷制备条件如下：BBZA添加量(质量分数)为2.0%,烧结温度为950℃。在该条件下制备的BaTiO₃陶瓷介电常数达到1 364,介电损耗低至1.2%。     

Near infrared study of aqueous rare-earth ethylsulfates

The near infrared spectra of aqueous solutions of the ethylsulfates of La, Nd, Gd, Tb, Er, Yb, Lu, Y, and Na have been determined from about 0.2 mol-dm^–3 to nearly saturation. The extinction coefficients of water have been calculated taking into account the absorption of ethylslfate anions determined in separate experiments. Their values appeared to be nearly the same as that of pure water. The relative contents of free OH groups in 0.5 and 0.7M solutions have been estimated from the absorbances at 1160 nm. They were lower in solutions of the heavy rare-earth ethylsulfates (Tb, Er, Yb, Lu) than in equimolar solutions of the lighter ones (La, Nd), confirming our previous view that secondary hydration of the heavy trivalent rare-earth cations is distinctly stronger than that of the lighter ones. A comparison of the spectra of these aqueous ethylsulfates with those of perchlorates shows that the structure-breaking ability of the C₂H₅SO ₄ ^– ion is much smaller than that of perchlorate anion.     

电感耦合等离子体光谱法(ICP-AES)测定银精矿中铜、铅、锌、砷、镉、钙、镁、锰含量

针对银精矿样品复杂,难消解的特点,研究了不同酸溶法和碱熔法对样品的消解情况,建立了硝酸,盐酸,氢氟酸,高氯酸消解银精矿的方法。根据元素灵敏度和抗干扰性,选定各元素的测定波长。通过酸溶样和碱熔样测定结果比对,验证了方法准确性。建立了四酸消解-电感耦合等离子体光谱法测定银精矿中铜、铅、锌、砷、镉、钙、镁、锰含量的方法,元素的线性相关系数均在0.9999以上。通过共存元素干扰实验,确定了银精矿中高含量元素(铜、铅、锌、铁、锑、铋等)对测定元素结果没有影响。方法检出限：Cu 0.0063 mg/L, Pb 0.0159 mg/L ,Zn 0.0090 mg/L,As 0.0192 mg/L, Cd 0.0093 mg/L ,Ca 0.0084 mg/L, Mg 0.0075 mg/L, Mn 0.0081 mg/L。测定下限：Cu 0.0105mg/L,Pb 0.0265 mg/L, Zn 0.0150 mg/L, As 0.0320 mg/L, Cd 0.0155 mg/L, Ca 0.0140 mg/L, Mg 0.0125 mg/L,Mn 0.0135 mg/L。3个样品的相对标准偏差在0.87%~3.56%之间,加标回收率在95.00%~103.56%之间。方法流程短,操作简单,快速,灵敏度和再现性高,结果准确可靠,可以满足银精矿中铜、铅、锌、砷、镉、钙、镁、锰含量的测定。     

Structural studies of five layer Aurivillius oxides: A2Bi4Ti5O18 (A=Ca, Sr, Ba and Pb)

The room temperature structures of the five layer Aurivillius phases A₂Bi₄Ti₅O₁₈ (A=Ca, Sr, Ba and Pb) have been refined from powder neutron diffraction data using the Rietveld method. The structures consist of [Bi₂O₂]²⁺ layers interleaved with perovskite-like [A₂Bi₂Ti₅O₁₆]²⁻ blocks. The structures were refined in the orthorhombic space group B2eb (SG. No. 41), Z=4, and the unit cell parameters of the oxides are a=5.4251(2), b=5.4034(1), c=48.486(1); a=5.4650(2), b=5.4625(3), c=48.852(1); a=5.4988(3), b=5.4980(4), c=50.352(1); a=5.4701(2), b=5.4577(2), c=49.643(1) for A=Ca, Sr, Ba and Pb, respectively. The structural features of the compounds were found similar to n=2-4 layers bismuth oxides. The strain caused by mismatch of cell parameter requirements for the [Bi₂O₂]²⁺ layers and perovskite-like [A₂Bi₂Ti₅O₁₆]²⁻ blocks were relieved by tilting of the TiO₆ octahedra. Variable temperature synchrotron X-ray studies for Ca and Pb compounds showed that the orthorhombic structure persisted up to 675 and 475 K, respectively. Raman spectra of the compounds are also presented.     

Metal-organic deposition of YBa2Cu3Ox and Bi2Sr2Ca1Cu2Ox films on various substrates starting from different fluorine-free metallorganic compounds

YBa₂Cu₃O_x (Y-123) and Bi₂Sr₂Ca₁Cu₂O_x (Bi-2212) films on various substrates have been prepared by Metal-Organic Deposition starting from different metallorganic fluorine-free compounds and using a very simple instrumentation. The processing conditions include a rapid pyrolysis step in air and an annealing step in oxygen for Y-123 and in air for Bi-2212. The films obtained have been characterized by X-ray diffraction (XRD) and the formation of a superconducting phase of Y-123 or Bi-2212 was confirmed measuring the critical temperature (T _c) with Ac-susceptibility and resistive measurements. Microstructure and final cationic ratios have been studied by scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS).     

Decomposition of P2S2N4(Si(CH3)3)4A12C14 as Studied by FT-Raman and Quantum Chemistry Means

The dimeric title compound decomposes upon heating to give the monomer and desulphurized monomer as shown by FT-Raman and quantum chemical means.     

Preparation of ZrO2-TiO2-CeO2 and Its Application in the Selective Catalytic Reduction of NO with NH3

TiO₂,ZrO₂-TiO₂,andZrO₂-TiO₂-CeO₂ were prepared by co-precipitation method and characterized by X-ray diffraction (XRD), specific surface area measurements (BET), temperature programmed desorption (NH₃-TPD), oxygen storage capacity (OSC), and temperature programmed reduction (H₂-TPR). The results showed that ZrO₂-TiO₂-CeO₂ exhibited large number of surface strong acid, possessed some oxygen storage capacity, and strong redox property. The three materials were used as supports and the monolith catalysts were prepared with 1% (w) V₂O₅ and 9% (w)WO₃ for selective catalytic reduction (SCR) of NO with ammonia in the presence of excessive O₂, and the results of catalytic activity showed that the catalyst used ZrO₂-TiO₂-CeO₂ as support yielded nearly 100% NO conversion at 275 °C at a gas hourly space velocity (GHSV) of 10000 h⁻¹, and it had the best catalytic activity and showed great potential for practical application.     

The crystal chemistry of Bi6TP2O15+x, T=Fe, Ni, Zn: Isomorphism and polymorphism, structural relationship to Bi6TiP2O16

The crystal structures of compounds with nominal compositions Bi₆FeP₂O_15+x (I), Bi₆NiP₂O_15+x (II) and Bi₆ZnP₂O_15+x (III) were determined from single-crystal X-ray diffraction data. They are monoclinic, space group I2, Z=2. The lattice parameters for (I) are a=11.2644(7), b=5.4380(3), c=11.1440(5) Å, β=96.154(4)°; for (II) a=11.259(7), b=5.461(4), c=11.109(7) Å, β=96.65(1)°; for (III) a=19.7271(5), b=5.4376(2), c=16.9730(6) Å, β=131.932(1)°. Least squares refinements on F² converged for (I) to R1=0.0554, wR₂=0.1408; for (II) R₁=0.0647, wR₂=0.1697; for (III) R₁=0.0385, wR₂=0.1023. The crystals are complexly twinned by 2-fold rotation about , by inversion and by mirror reflection. The structures consist of edge-sharing articulations of OBi₄ tetrahedra forming layers in the a-c plane that then continue by edge-sharing parallel to the b-axis. The three-dimensional networks are bridged by Fe and Ni octahedra in (I) and (II) and by Zn trigonal bipyramids in (III) as well as by oxygen atoms of the PO₄ moieties. Bi also randomly occupies the octahedral sites. Oxygen vacancies exist in the structures of the three compounds due to required charge balances and they occur in the octahedral coordination polyhedron of the transition metal. In compound (III), no positional disorder in atomic sites is present. The Bi-O coordination polyhedra are trigonal prisms with one, two or three faces capped. Magnetic susceptibility data for compound (I) were obtained between 4.2 and 350 K. Between 4.2 and 250 K it is paramagnetic, μ_eff=6.1 μ_B; a magnetic transition occurs above 250 K.