纳米SrAl2O4∶Eu2+，Dy3+长余辉发光材料的制备与性能

采用水热-均匀共沉淀法制备了纳米SrAl₂O₄∶Eu²⁺,Dy³⁺长余辉发光材料。通过XRD、TEM、荧光光谱、热释光谱对其结构和性能进行分析。XRD结果表明所制备的SrAl₂O₄∶Eu²⁺,Dy³⁺纳米发光材料为单相,属单斜晶系。TEM测试表明纳米SrAl₂O₄∶Eu²⁺,Dy³⁺发光材料为规则的球状粒子,粒径为50~80 nm,且分散性良好。激发和发射光谱测试表明,样品的激发光谱是峰值在356 nm的连续宽带谱,发射光谱是峰值位于512 nm的宽带谱,与SrAl₂O₄∶Eu²⁺,Dy³⁺粗晶材料相比,激发和发射光谱都出现了“蓝移”现象。样品的热释光峰值位于358 K,适合于产生长余辉。     

沉淀法合成蓝色长余辉发光材料Sr2MgSi2O7∶Eu2+，Dy3+

采用沉淀法制备了高亮度的长余辉发光材料Sr₂MgSi₂O₇∶Eu²⁺,Dy³⁺。通过XRD、荧光光谱和热释光谱对其进行表征。XRD测试表明所制备的Sr₂MgSi₂O₇∶Eu²⁺,Dy³⁺为单相,四方晶。荧光光谱测试表明,用λ_em=467 nm作为监控波长,在275~450 nm之间有宽的激发光谱,峰值位于399 nm。用λ_ex=399 nm激发样品,其发射光谱为一宽带,峰值位于467 nm。1 050 ℃煅烧前躯体所制备的Sr₂MgSi₂O₇∶Eu²⁺,Dy³⁺发光性能最好。热释光谱峰值位于357 K,适合长余辉现象的产生。对Sr₂MgSi₂O₇∶Eu²⁺,Dy³⁺长余辉发光机理进行了讨论。     

静电纺丝技术制备Y2O3∶Eu3+纳米带及其发光性质

采用静电纺丝技术制备了PVP/[Y(NO₃)₃+Eu(NO₃)₃]复合纳米带,将其进行热处理,获得了Y₂O₃∶Eu³⁺纳米带。采用XRD、FTIR、SEM、TEM、荧光光谱等技术对焙烧后的样品进行了表征。结果表明：600 ℃焙烧即可获得Y₂O₃∶Eu³⁺纳米带,800 ℃时结晶更为良好,产物属于立方晶系。纳米带表面光滑,由平均直径为30 nm的小颗粒紧密排列而成,为多晶结构。随着温度升高,纳米带宽度减小。焙烧800 ℃获得的Y₂O₃∶Eu³⁺纳米带的发光性质优于焙烧600 ℃的Y₂O₃∶Eu³⁺纳米带。与体材料相比,该纳米带的激发光谱Eu³⁺-O^2-电荷迁移态(CTB)发生红移,发射光谱发生蓝移。     

SrAl2O4∶Eu2+，Dy3+纳米长余辉发光材料的制备与表征

采用溶胶-凝胶法制备了SrAl₂O₄∶Eu²⁺，Dy³⁺ 纳米长余辉发光材料，研究了pH值、反应温度和络合剂等对溶胶-凝胶形成的影响，研究了灼烧温度对SrAl₂O₄∶Eu²⁺，Dy³⁺ 晶相、颗粒尺度和发光性能的影响。利用XRD, SEM，光谱分析等手段对产物进行了结构和性能分析。实验结果表明，在800 ℃时SrAl₂O₄晶相开始形成但没有发光，而在1 100 ℃烧结的样品则具有很好的发光性能。样品平均晶粒尺寸随灼烧温度升高而增加，平均晶粒尺寸为20～40 nm。样品的激发光谱是峰值在240，330，378和425 nm的连续宽带谱，发光光谱是峰值在523nm的宽带谱，与SrAl₂O₄∶Eu²⁺，Dy³⁺ 粗晶材料相比，发光光谱发生了“红移”现象。样品的热释光峰值位于157 ℃，与SrAl₂O₄∶Eu²⁺，Dy³⁺ 粗晶材料相比，峰值向低温移动了13℃。     

SrAl2O4∶Eu2+，Dy3+长余辉材料发光性能与温度依赖研究

对SrAl₂O₄∶Eu²⁺,Dy³⁺长余辉材料在100~500 K温度之间的发光性能进行研究。实验结果表明,材料的荧光及余辉强度在特定温度区间内呈线性变化,在热释峰所在温度范围具有较好的发光性能。其变化规律表明SrAl₂O₄∶Eu²⁺,Dy³⁺长余辉材料内部陷阱中电子的释放包括瞬时释放和延时释放两种类型,其中电子瞬时释放进而跃迁发光是荧光的组成部分,延时释放产生的跃迁则导致余辉发光。陷阱和电子的复合与陷阱中电子释放过程均随温度升高而增强,但温度过高时会发生热猝灭。材料荧光强度与余辉强度在特定温度区间内随温度呈线性变化关系表明其可以作为一种光纤温度传感材料。     

共沉淀法合成Yb3+∶Y2O3纳米粉及透明陶瓷的性能

以Y₂O₃为基质材料,掺杂不同含量的Yb³⁺,采用共沉淀法制备出性能良好的Yb³⁺∶Y₂O₃纳米粉,将粉体在1 700 ℃和真空度为1×10^-3 Pa下烧结5 h得到Yb³⁺∶Y₂O₃透明陶瓷。用XRD、TEM、UV-Vis、FL分别对样品的结构、形貌和发光性能进行了研究。结果表明：Yb³⁺完全固溶于Y₂O₃的立方晶格中,Yb³⁺∶Y₂O₃粉体大小均匀,近似球形,尺寸约40～60 nm。Yb³⁺∶Y₂O₃透明陶瓷相对密度为99.7%,在波长600～800 nm范围内其透光率达到80%。Yb³⁺∶Y₂O₃透明陶瓷在950 nm处吸收线宽达到26 nm,在1 031 nm和1 076 nm处的发射线宽分别为13 nm和17 nm。     

SrAl2O4：Eu2+，Dy3+的助熔剂法制备及其发光特性

以B₂O₃为助熔剂，在1 350 ℃、还原性气氛下成功制备了SrAl₂O₄单相粉末样品。用同样的方法制备了系列单相Sr_1-x-yAl₂O₄：Eu²⁺_x，Dy³⁺_y·nB₂O₃(0.005≤x≤0.07， 0.01≤y≤0.05，0.05≤n≤0.25)样品并表征了其长余辉发光特性。结果表明，最佳的Eu²⁺含量为0.02。辅助激活离子Dy³⁺在Sr_0.98Al₂O₄：Eu²⁺_0.02中的掺杂在一定范围内可以显著提高亮度和余辉时间，最佳Dy³⁺含量为0.03。研究不同B₂O₃含量对Sr_0.95Al₂O₄：Eu²⁺_0.02，Dy³⁺_0.03发光性能的影响，结果说明最佳的B₂O₃含量为n=0.1，余辉肉眼可见(≥0.32 mcd·m^-2)时间达4 000 min。利用正电子湮灭技术和热释光技术，研究和讨论了B₂O₃对Sr_0.95Al₂O₄：Eu²⁺_0.02，Dy³⁺_0.03的发光和余辉性能的影响，结果表明B₂O₃的添加有助于Dy³⁺在晶格中形成深度合适、有益于余辉的空位缺陷。     

非晶红色荧光粉Cd3Al2Si3O12∶Eu3+的制备及发光性能

使用溶胶-凝胶法制备了Cd₃Al₂Si₃O₁₂∶Eu³⁺非晶体系红色荧光粉,并对其发光性质进行了研究。该荧光粉在Eu³⁺的位于394 nm的⁵L₆能级和464 nm的⁵D₂能级的激发下能够产生强的⁵D₀→⁷F₂的红光特征发光,最佳掺杂摩尔分数为25%。Cd₃Al₂Si₃O₁₂∶Eu³⁺荧光粉与传统的Y₂O₃∶Eu³⁺相比较,其发光强度是Y₂O₃∶Eu³⁺的2.4倍左右(在394和464 nm的激发下)。Cd₃Al₂Si₃O₁₂∶Eu³⁺的热稳定性好,比已经商业化的YAG∶Ce³⁺的热猝灭影响要小得多。所有这些结果表明Cd₃Al₂Si₃O₁₂∶Eu³⁺可作为暖白光LED用红色荧光粉。     

沉淀法合成纳米晶上转换发光材料Y2O2S∶Yb，Er

采用沉淀法在不同温度下合成了纳米上转换发光材料Y₂O₂S∶Yb,Er,运用XRD、TEM和上转换发光光谱对其进行表征。结果表明,使用该法在700℃即能合成纳米上转换发光材料Y₂O₂S∶Yb,Er,随着合成温度的升高,产物的粒径从60到120 nm逐渐增大。上转换发光光谱显示该材料主要有2个发射带,其中红光发射的中心波长位于668 nm,绿光发射的中心波长位于525和550 nm。此外,对材料的上转换发光过程进行了探讨。     

同轴静电纺丝技术制备Y2O3:Eu3＋@SiO2豆角状纳米电缆与表征

采用同轴静电纺丝技术, 以氧化钇、氧化铕、正硅酸乙酯(C₈H₂₀O₄Si)、无水乙醇、PVP和DMF为原料, 成功制备出大量的Y₂O₃:Eu^3＋@SiO₂豆角状纳米电缆. 用TG-DTA, XRD, SEM, TEM和荧光光谱等分析技术对样品进行了系统地表征． 结果表明, 得到的产物为Y₂O₃:Eu^3＋@SiO₂豆角状纳米电缆, 以无定型SiO₂为壳层, 晶态Y₂O₃:Eu^3＋球为芯, 电缆直径约为200 nm, 内部球平均直径约150 nm, 壳层厚度约为25 nm, 电缆长度＞300 μm. 纳米电缆内部为球状结构, 沿着纤维长度方向有序排列, 形貌均一. Y₂O₃:Eu^3＋@SiO₂豆角状纳米电缆在246 nm紫外光激发下, 发射出Eu^3＋离子特征的波长为614 nm的明亮红光. 对其形成机理进行了初步讨论.     

Sc2MgGa2 and Y2MgGa2

Scandium magnesium gallide, Sc₂MgGa₂, and yttrium magnesium gallide, Y₂MgGa₂, were synthesized from the corresponding elements by heating under an argon atmosphere in an induction furnace. These intermetallic compounds crystallize in the tetragonal Mo₂FeB₂‐type structure. All three crystallographically unique atoms occupy special positions and the site symmetries of (Sc/Y, Ga) and Mg are m2m and 4/m, respectively. The coordinations around Sc/Y, Mg and Ga are pentagonal (Sc/Y), tetragonal (Mg) and triangular (Ga) prisms, with four (Mg) or three (Ga) additional capping atoms leading to the coordination numbers [10], [8+4] and [6+3], respectively. The crystal structure of Sc₂MgGa₂ was determined from single‐crystal diffraction intensities and the isostructural Y₂MgGa₂ was identified from powder diffraction data.     

Zur Kenntnis der Dialkalimetalldichalkogenide β-Na2S2, K2S2, α-Rb2S2, β-Rb2S2, K2Se2, Rb2Se2, α-K2Te2, β-K2Te2 und Rb2Te2

On Dialkali Metal Dichalcogenides β-Na₂S₂, K₂S₂, α-Rb₂S₂, β-Rb₂S₂, K₂Se₂, Rb₂Se₂, α-K₂Te₂, β-K₂Te₂ and Rb₂Te₂ The first presentation of pure samples of α- and β-Rb₂S₂, α- and β-K₂Te₂, and Rb₂Te₂ is described. Using single crystals of K₂S₂ and K₂Se₂, received by ammonothermal synthesis, the structure of the Na₂O₂ type and by using single crystals of β-Na₂S₂ and β-K₂Te₂ the Li₂O₂ type structure will be refined. By combined investigations with temperature-dependent Guinier-, neutron diffraction-, thermal analysis, and Raman-spectroscopy the nature of the monotropic phase transition from the Na₂O₂ type to the Li₂O₂ type will be explained by means of the examples α-/β-Na₂S₂ and α-/β-K₂Te₂. A further case of dimorphic condition as well as the monotropic phase transition of α- and β-Rb₂S₂ is presented. The existing areas of the structure fields of the dialkali metal dichalcogenides are limited by the model of the polar covalence.     

Thermal decomposition of Me3SnO2PCl2, Me2Sn(O2PCl2)2 and Ph3SnO2PCl2

TG and DTA studies on Me₃SnO₂PCl₂, Me₂Sn(O₂PCl₂)₂ and Ph₃SnO₂PCl₂ were carried out under dynamic argon atmosphere. The results show that the decomposition proceeds in different stages leading to the formation of Sn₃(PO₄)₂ as a stable product. This compound was characterized by IR spectroscopy. Decomposition schemes involving reductive elimination reactions were proposed.     

The alkali hypophosphites KH2PO2, RbH2PO2 and CsH2PO2

The structures of the hypophosphites KH₂PO₂ (potassium hypophosphite), RbH₂PO₂ (rubidium hypophosphite) and CsH₂PO₂ (caesium hypophosphite) have been determined by single‐crystal X‐ray diffraction. The structures consist of layers of alkali cations and hypophosphite anions, with the latter bridging four cations within the same layer. The Rb and Cs hypophosphites are isomorphous.     

Crystal Structures of [Bu2Sn(O2PPh2)2], [Ph2Sn(O2PPh2)2], and [PhClSn(O2PPh2)OMe]2. Raman Spectra of [Ph2Sn(O2PPh2)2] and [PhClSn(O2PPh2)OMe]2

[(n‐Bu)₂Sn(O₂PPh₂)₂] ( 1 ), and [Ph₂Sn(O₂PPh₂)₂] ( 2 ) have been synthesized by the reactions of R₂SnCl₂ (R=n‐Bu, Ph) with HO₂PPh₂ in Methanol. From the reaction of Ph₂SnCl₂ with diphenylphosphinic acid a third product [PhClSn(O₂PPh₂)OMe]₂ ( 3 ) could be isolated. X‐ray diffraction studies show 1 to crystallize in the monoclinic space group P2₁/c with a = 1303.7(1) pm, b = 2286.9(2) pm, c = 1063.1(1) pm, β = 94.383(6)°, and Z = 4. 2 crystallizes triclinic in the space group , the cell parameters being a = 1293.2(2) pm, b = 1478.5(4) pm, c = 1507.2(3) pm, α = 98.86(3)°, β = 109.63(2)°, γ = 114.88(2)°, and Z = 2. Both compounds form arrays of eight‐membered rings (SnOPO)₂ linked at the tin atoms to form chains of infinite length. The dimer 3 consists of a like ring, in which the tin atoms are bridged by methoxo groups. It crystallizes triclinic in space group with a = 946.4(1) pm, b = 963.7(1) pm, c = 1174.2(1) pm, α = 82.495(6)°, β = 66.451(6)°, γ = 74.922(6)°, and Z = 1 for the dimer. The Raman spectra of 2 and 3 are given and discussed.     

Electrochemical study of (NEt4)2Cl2FeS2MoS2 and (NEt4)2Cl2FeS2MoS2FeCl2

Summary The ability of [MoS₄]^2–, anions to be used as ligands for transition metal ions has been widely demonstrated, especially with Fe²⁺. The present study has been restricted to linear complexes such as (NEt₄)₂ [Cl₂FeS₂MoS₂] and (NEt₄)₂[Cl₂FeS₂MoS₂FeCl₂]. Their electrochemical properties are described: upon electrochemical reduction, these compounds yield MoS₂, as a black precipitate, and an iron complex in solution, assumed to be [SFeCl₂]^2–. The electrochemical reduction goes through two electron transfers, coupled with the breakdown of the molecular skeleton: a DISPl and an ECE mechanism. Depending on the solvent, the following equilibrium may be observed: [Cl₄Fe₂MoS₄]^2–[Cl₂FeMoS₄]^2–+FeCl₂. The equilibrium constant, K_D, was evaluated by differential pulse polarography. K_D is tightly related to the donor number of the solvent.     

Formal [(2+2)+2] and [(2+2)+(2+2)] nonconjugated dienediyne cascade cycloadditions

[reaction: see text] Fluoranthene 2 and heptacycle 3 are easily accessible from the reaction of diyne 1 and norbornadiene (NBD) in the presence of the rhodium catalyst. The unusual [(2+2)+(2+2)] adduct 3 was confirmed by the X-ray crystal structure analysis.