氟尿苷-层状双金属氢氧化物纳米杂化物制备及表征

采用共沉淀法将抗癌药物氟尿苷插入Mg-Al层状双金属氢氧化物(LDHs)的层间,合成了氟尿苷-LDHs纳米杂化物。依据氟尿苷分子大小和杂化物通道高度推测,氟尿苷分子是以长轴垂直或略倾斜于LDHs层片在LDHs层间呈双层排列。分别在pH=4.8和7.2的介质中研究了药物释放动力学,表明符合准二级动力学方程;释放速率随载药量增大而降低;氟尿苷-LDHs纳米杂化物具有良好的缓释效果。     

大黄素/Mg-Al-LDHs纳米杂化物的制备及缓释性能研究

以Mg-Al型层状双金属氢氧化物(Mg-Al-LDHs)为载体,将大黄素分子通过二次组装法成功插入其层间,得到大黄素/Mg-Al-LDHs纳米杂化物。XRD结果显示,Mg-Al-LDHs粒子层间距由0.48 nm增大到3.35 nm。差热曲线(DTA曲线)分析结果表明,该纳米杂化物分子中大黄素的分解温度比纯大黄素的分解温度高50℃。分别在pH 4.8和pH 7.5的缓冲溶液中测定了大黄素/LDHs的缓释性能,结果表明大黄素/LDHs的药品释放速率明显低于二者的物理混合物,并探讨了释放机理。     

Synthesis, sustained release properties of magnetically functionalized organic–inorganic materials: Amoxicillin anions intercalated magnetic layered double hydroxides via calcined precursors at room temperature

Zinc–aluminum–carbonate–layered double hydroxides (ZnAl–CO₃–LDHs), loaded with magnetic substrates (Fe₃O₄), were prepared for sustained drug-targeting delivery. From the X-ray diffraction results, it was found that the magnetic substrates were successfully incorporated with LDHs and highly dispersed in the hydrotalcite structure. After intercalation with an antibiotic drug (amoxicillin) by using a calcinations–reconstruction method, the basal spacing of layered double hydroxides increased from 7.51 Å to 12.35 Å, indicating that amoxicillin was successfully intercalated into the interlay space of LDHs as a monolayer. Furthermore, in vitro drug release experiments in pH 7.4 phosphate buffer solution (PBS) showed sustained release profiles with amoxicillin as a model drug. Magnetic measurements revealed that the composite possessed paramagnetic properties at room temperature.     

Synthesis and characterization of Naproxen intercalated Zn–Al layered double hydroxides

In this paper, naproxen was intercalated into Zn–Al layered double hydroxides (LDHs) by ion exchange method to obtain naproxen/LDHs nanohybrids. The effects of the contact time, the composition, and the structural charge density (σ _S,T ) and the specific surface area of LDHs, and pH value on the uptake of naproxen on LDHs, and the release of naproxen from the naproxen/LDHs nanohybrids were investigated. The adsorption isotherm curves of naproxen on the LDHs obey the Langmuir equation, and apparent monolayer capacity (A _m) in units of mmol m⁻² increases with the increase of the σ _S,T value of the LDHs samples. The release rate of naproxen from the naproxen/LDHs nanohybrids decreases with the increase of the σ _S,T value of the LDHs samples and is much lower than that of naproxen troche, indicating that the naproxen/LDHs nanohybrid is an efficient drug-controlled release system. In the pH range of 6~11.5, the uptake amount (A _eq) of naproxen on the LDHs decreases with the increase of pH value. The A _m values of LDHs(Cl⁻) are much higher than that of , which may contribute to that LDHs(Cl⁻), which has a stronger anion exchange ability than . The naproxen molecules are possibly adsorbed on each surface of the basal layer of LDHs. In other words, a bilayer is formed in the gallery of LDHs.     

离子交换法合成MTX/LDHs复合物的研究及体外细胞实验的探索

研究了不同水热温度下合成的层状双金属氢氧化物(layered double hydroxides,LDHs)对离子交换法制备的MTX/LDHs纳米复合物的影响.并利用透射电镜(TEM)、X-射线衍射(XRD)、MTT等手段,对纳米复合物的结构及载药量、控释-缓释性、生物细胞活性母体等性质进行了系统研究.结果表明,不同LDHs母体对离子交换后复合物的形貌和性质起着至关重要的作用.在磷酸缓冲液中考察了MTX/LDHs纳米复合物的药物控释性能并进行了动力学拟合,结果表明,采用离子交换法制备MTX/LDHs纳米复合物的释药过程是Fick扩散控制的离子交换和粒内扩散过程.最后,采用MTT法探究了MTX/LDHs纳米复合物对肺癌细胞A549增殖的抑制作用,结果表明,复合物较纯的MTX具有更好的抑制癌细胞增殖的作用.     

Triton X-100六角液晶相中制备镁铝层状双金属氢氧化物纳米片及其药物载体应用

以Triton X-100 六角相溶致液晶作微反应器, 采用共沉淀法制备了镁铝层状双金属氢氧化物(LDHs)纳米薄片(L-LDHs). 以双氯芬酸钠(DS)为药物模型分子, 采用离子交换法制备了DS插层LDHs (DS/L-LDHs)纳米杂化物, 在37.0 ℃、pH=7.2的缓冲溶液中, 考察了纳米杂化物的药物释放性能, 并与传统溶液共沉淀法制备的镁铝LDHs (S-LDHs)纳米片状颗粒进行了对比. 采用粉末X射线衍射(XRD)、傅里叶变换红外(FT-IR)光谱、场发射扫描电镜(FE-SEM)、透射电镜(TEM)和N₂吸附-脱附等技术对所制备的LDHs和DS/LDHs 样品的晶体结构、比表面积、形貌特征等进行了表征. 结果表明, L-LDHs比S-LDHs具有更低的片厚度, 更高的比表面积和药物负载量, 所形成的DS/L-LDHs纳米杂化物药物释放速率也明显低于DS/S-LSHs, 即L-LDHs更适于作药物载体. DS/L-LDHs纳米杂化物的药物释放过程符合准二级动力学方程, 受颗粒内部扩散过程控制. 溶致液晶模板法可实现LDHs的形貌可控制备, 为LDHs基功能材料的研发提供了新途径.     

ZnO nanorods decorated calcined Mg–Al layered double hydroxides as photocatalysts with a high adsorptive capacity

The nanocomposites of magnesium–aluminium–carbonate–layered double hydroxides (Mg–Al–CO₃–LDHs) and ZnO nanorods were prepared via a homogeneous precipitation process. The presence of ZnO nanorods made the calcined Mg–Al–CO₃–LDHs, the strong adsorptive adsorbents for anions, have a photocatalytic activity. Both Mg–Al–CO₃–LDHs and the nanocomposites with various ZnO/Mg–Al–CO₃–LDHs mass ratios from 0.5:1 to 3:1 were characterized by X-ray diffraction, transmission electron microscope and UV–vis diffuse reflectance spectra. The nanocomposites quickly adsorbed the anionic dyes such as acid red G (ARG) without the light illumination, and the adsorbed dyes on the recovered nanocomposites were then degraded in a separated photocatalytic reactor. The adsorption ability of the nanocomposites and their photocatalytic activities for the removal of ARG were evaluated by the Fourier transform infrared spectra and UV–vis extinction spectra. The sample at 3:1 ZnO/Mg–Al–CO₃–LDHs mass ratio was shown to have higher photocatalytic efficiencies.     

Synthesis and Characterization of Imidacloprid/Hydrotalcite-like Compound Nanohybrids

Hydrotalcite‐like compounds (HTlc) were first modified by sodium dodecyl sulfate (SDS), then the intercalation of imidacloprid (IM) into modified HTlc was carried out in mixed solvent of toluene/ethanol by an evaporating solvent enhanced intercalation method, obtaining IM‐SDS‐HTlc nanohybrids. It was found that the nanohybrids could well control the release of imidacloprid, demonstrating that the nanohybrids are a potential pesticide controlled‐release formulation. The release of imidacloprid from IM‐SDS‐HTlc nanohybrids is dependent on the pH and the presence of electrolyte in release medium. Acidic medium and the presence of electrolytes induce the higher release rate of imidacloprid. The release process of imidacloprid from IM‐SDS‐HTlc nanohybrids can be described by pseudo‐second‐order release kinetics.     

(羟基喜树碱@胆酸钠)-层状双金属氢氧化物纳米杂化物的组装及表征

采用“药物修饰-共组装”法制备了(羟基喜树碱@胆酸钠)-层状双金属氢氧化物纳米杂化物. 先用胆酸钠(SCL)包裹羟基喜树碱(HCPT)形成胶束, 再与微反应器制备的层状双氢氧化物(LDH)纳米片共组装形成纳米杂化物, 其载药量可达12.9%, 杂化物中HCPT以高生物活性的内酯形式存在. 采用聚乙二醇(PEG)和羧甲基纤维素(CMC)分别对所制备的(HCPT@SCL)-LDH纳米杂化物进行了表面修饰, 结果表明, 纳米杂化物的分散性得到明显改善; PEG的修饰效果优于CMC, 所获得的PEG-(HCPT@SCL)-LDH杂化物的平均粒径可小至约70 nm, 具有良好的分散性和药物缓释效果. 其药物释放过程可用准二级动力学方程描述, 颗粒内部扩散是药物释放过程的控制步骤.     

Synthesis of Hybrid Organic-Inorganic Hydrotalcite-Like Materials Intercalated with Duplex Herbicides: The Characterization and Simultaneous Release Properties

In this study, a controlled-release formulation of duplex herbicides, namely, 2,4,5-trichlorophenoxybutyric acid (TBA) and 3,4-dichlorophenoxy-acetic acid (3,4D), was simultaneously embedded into Zn-Al-layered double hydroxides (LDHs). The resulting nanohybrid Zinc-Aluminium-3,4D-TBA (ZADTX) was composed of a well-ordered crystalline layered structure with increasing basal spacing from 8.9 Å to 20.0 Å in the Powder X-ray Diffraction (PXRD) with 3,4D and TBA anions located in the gallery of LDHs with bilayer arrangement. The release of 3,4D and TBA fit the pseudo-second-order model. This duplex nanohybrid possessed a well-controlled release property (53.4% release from TBA and 27.8% release from 3,4D), which was highly effective, requiring the use of a small quantity and, hence, environmentally safer.     

利用有机改性的类水滑石缓释阿维菌素

采用蒸发溶剂促进插层(evaporating solvent enhanced intercalation)的方法把农药阿维菌素(Avermectin, AVM)插层到十二烷基硫酸钠(SDS)改性的类水滑石(Hydrotalcite-like compound, HTlc)层间，合成了AVM-SDS-HTlc纳米杂化物。研究发现其能够很好的控制阿维菌素的释放，表明AVM-SDS-HTlc纳米杂化物是一种很有潜力的农药控释剂型。AVM-SDS-HTlc纳米杂化物的释放受pH、温度和电解质的影响，酸性介质、较高温度以及有电解质存在会提高其缓释速率。释放过程符合准一级释放动力学，释放的活化能为279 kJ/mol。     

Effect of Ni cations and microwave hydrothermal treatment on the related properties of layered double hydroxide-ethylene vinyl acetate copolymer composites

The effect of Ni cations and synthetic methods on the crystallinity, morphology, thermal stability and hydrophobic properties of carbonate-containing layered double hydroxides (LDHs) was investigated. The conventional hydrothermal treatment (CHT) and microwave hydrothermal treatment (MHT) methods were used to synthesize LDHs. The microwave treatment LDHs (MgAl-MHT and NiMgAl-MHT) have higher crystallinity and smaller crystal sizes than the conventional hydrothermal treatment LDHs (MgAl-CHT and NiMgAl-CHT). IR results indicate that the interactions of both OH(-)-CO(3)(2-) and CO(3)(2-)-CO(3)(2-) in NiMgAl-MHT are weaker. Furthermore, the thermal decomposition of OH(-) and CO(3)(2-) in the NiMgAl-MHT sample occurred earlier and faster than that of other LDHs. The contact angle values indicate that NiMgAl-MHT has the highest hydrophobicity. The influences of the LDHs on the thermal degradation and flame retardance of ethylene vinyl acetate copolymer (EVA)-LDH composites have also been studied in detail. NiMgAl-MHT has the more homogeneous nano-dispersed layers in EVA matrix. All composites enhance the thermal stability compared with the pure EVA because of the release of H(2)O and CO(2). Flame retardance of NiMgAl-MHT-EVA was obviously higher than that of the pure EVA and other composites.     

Layered double hydroxides for ultrathin hybrid film preparation using layer-by-layer and spin coating methods

In our work, the synthesis and the structural properties of various layered double hydroxides (LDHs) were investigated. LDHs were prepared from metal salts with sodium hydroxide in aqueous medium at various molar ratios. Nitrate salts of, Mg²⁺, Ca²⁺, Co²⁺, Al³⁺ and acetate salt of Zn²⁺ were applied as precursors. The concentrations of LDH suspensions were in the range of 0.1–1 g/100 ml. The particle size and zeta-potential of LDH particles were measured by dynamic light scattering (DLS). The structure properties of LDHs were analyzed by several methods, namely XRD, UV-vis spectroscopy and AFM. We used the layer-by-layer dipping immersion technique and the spin coating method for the preparation of multilayer films from LDHs on glass surfaces. The cleaned glass surface has a negative surface charge, which is compensated by the positively charged LDH particles. Different negatively charged binders poly(sodium 4-styrenesulfonate), (PSS); poly(acryl-acid), (PAA) were utilized for the preparation of layer-by-layer films. Layer thickness was calculated from absorbance measurements by spectrophotometry and mass determination of the glass surface. Typical film thicknesses were in the range of 19–70 nm/layer and 6–40 μg/cm²/layer depending on the type of LDH and preparation technique. After n = 20 immersion cycles, maximal layer thickness was 1405 nm for 20 layers of 2:1 ZnAl–LDH/PSS film. The film preparation methods tested were compared and it was established that the films obtained by the layer-by-layer method are more stable but thicker than those prepared using the spin coating method.     

表面预处理对镁铝水滑石结构性质和缓释性能影响

以Mg-Al-NO₃水滑石（LDHs）为载体,将5-氟尿嘧啶（5-FU）通过离子交换法插入其层间,得5-FU/LDHs缓释材料。并对水滑石表面进行弱酸预处理改性,利用XRD、FTIR、TG-DSC、SEM和零电荷点（pHPZC）等表征手段,考察酸预处理对水滑石表面化学性质及微观结构的影响。结果表明,5-FU/LDHs的层间距从0.858nm扩大到1.064nm,层间5-FU₂阴离子与主体层板通过氢键与静电作用,以呈一定角度单层交替排列于层间。酸预处理的水滑石粒径变小,层板正电荷密度增大。5-FU的释放机理是物理扩散、离子交换和药物溶解等协同作用,酸预处理可提高水滑石的缓释性能和稳定性。     

The Effect of Hydrotalcite and Zinc Oxide on Smoke Suppression of Commercial Rigid PVC

To reduce the smoke release of poly(vinyl chloride) (PVC) during burning, layered double hydroxides (LDHs) and zinc oxide (ZnO) powders were used to modify the polymer. The results indicated that the addition of LDHs‐ZnO had a significant effect on smoke suppression. The limiting oxygen index (LOI) reached a maximum value and the smoke density rank (SDR) exhibited a minimum value when the weight percentages of LDHs and ZnO in PVC were 3% and 2%, respectively. Thermal stabilities of the modified PVC and degradation products were investigated by means of thermogravimetry and pyrolysis‐gas chromatography‐mass spectra (Py‐GC‐MS). The LDHs‐ZnO obviously accelerated the decomposition of PVC to release hydrogen chloride, and the decomposed PVC consequently produced the trans‐conjugated polyene sequences, which easily formed crosslinked structures. However, a cyclization reaction in PVC chain without the additives produced aromatic compounds such as benzene, toluene, and naphthalene at 350°C. Even though, an amount of aromatic compounds was released from the PVC modified with LDHs‐ZnO at the temperature of 600°C, the content of the decomposed products is relatively lower compared to unmodified PVC.     

表面预处理对镁铝水滑石结构性质和缓释性能影响

以Mg-Al-NO3水滑石(LDHs)为载体,将5-氟尿嘧啶(5-FU)通过离子交换法插入其层间,得5-FU/LDHs缓释材料。并对水滑石表面进行弱酸预处理改性,利用XRD、FTIR、TG-DSC、SEM和零电荷点(pHPZC)等表征手段,考察酸预处理对水滑石表面化学性质及微观结构的影响。结果表明,5-FU/LDHs的层间距从0.858 nm扩大到1.064 nm,层间5-FU2阴离子与主体层板通过氢键与静电作用,以呈一定角度单层交替排列于层间。酸预处理的水滑石粒径变小,层板正电荷密度增大。5-FU的释放机理是物理扩散、离子交换和药物溶解等协同作用,酸预处理可提高水滑石的缓释性能和稳定性。     

毒死蜱/环糊精在锌铝类水滑石中插层的制备和性能

以层状锌铝类水滑石(ZAL)为主体,分别以磺丁基醚-β-环糊精(SBECD)和羧甲基-β-环糊精(CMCD)包结毒死蜱(CPF)为客体分子,分别在乙醇和N-甲基吡咯烷酮(NMP)溶剂条件下制备ZAL-SBECD-CPF和ZALCMCD-CPF插层材料,采用X射线粉末衍射(XRD)、傅里叶变换红外(FT-IR)光谱和热重-差热分析(TG-DTA)对其结构和热稳定性进行表征。结果表明, CPF/SBECD和CPF/CMCD均可成功在ZAL中插层,且在NMP溶剂条件下合成样品的衍射峰强度要强;插层CPF分子有较高热稳定性。此外,还对ZAL-SBECD-CPF和ZAL-CMCD-CPF在pH = 5.0, 6.8的环境条件下的释放行为进行研究和对比。结果发现, ZAL-SBECD-CPF样品几乎没有缓释性能,而ZAL-CMCD-CPF有一定的缓释性能,这与客体分子在层间排布方式不同有关。两种样品在pH = 6.8条件下的释放百分率均高于pH = 5.0,这与释放环境和环糊精(CD)分子结构密切相关。ZAL-CMCD-CPF的释放行为可很好的用二级动力学方程和parabolic diffusion模型来描述,说明药物客体分子释放主要受扩散过程控制。研究结果将有助于开发ZAL-CMCD-CPF在农药制剂方面的应用价值。     

喜树碱插层的镁铝型层状双金属氢氧化物的合成及表征

采用共沉淀法把抗癌药物喜树碱（Camptothecin, CPT）插入层状双金属氢氧化物(layered double hydroxide, LDH)层间, 合成了CPT-LDH纳米杂化物。结果表明,在CPT-LDH纳米杂化物中,CPT在层间的排布方式有两种,即平行于层板的单层排列和垂直于层板的双层排列;缓释研究表明,CPT-LDH在pH 7.5的磷酸缓冲液中具有明显的缓释效果,其释放速率较相同pH值时CPT和LDH物理混合物的释放速率明显降低;考察了CPT-LDH的药物释放机理,在 pH 7.5的缓冲溶液中,释放过程受粒内扩散过程控制;CPT-LDH纳米杂化物的释放动力学符合准一级动力学过程。     

Synthesis of heptamolybdate‐intercalated MgAl LDHs and its application in polyurethane elastomer

Heptamolybdate (Mo₇O₂₄^6?) was intercalated in the interlayer space between MgAl‐layered double hydroxides (Mo‐MgAl LDHs) by the hydrothermal and ion exchange method, and then polyurethane elastomer (PUE) based composites were prepared by the prepolymerization method with different amounts of Mo‐MgAl LDHs. X‐ray diffraction (XRD), Fourier transform infrared (FTIR) spectra, laser Raman spectroscopy (LRS), and scanning electron microscopy (SEM) were employed to characterize the obtained LDHs. The performance of the PUE/LDHs were evaluated by measuring their thermal gravimetric, heat release rate (HRR), and smoke density (Ds). The results show that PUE/LDH composites exhibit a lower peak heat release rate (pk‐HRR), Ds, and a prolonged combustion time, in comparison with neat PUE. Comparison between NO₃‐MgAl LDHs and Mo‐MgAl LDHs containing composites show that the introduction of Mo⁶⁺ is able to facilitate flame retardance and smoke suppression efficiency, which results mainly from the presence of MoO₃ derived from the decomposition of Mo₇O₂₄^6? intercalated LDHs. Mo‐MgAl LDHs reduce the pk‐HRR of composites by 39% with only 1 wt.% content, and the maximum Ds of composites is reduced to a minimal value of 274 with 10 wt.% Mo‐MgAl LDHs. More importantly, LDHs would improve the mechanical properties at a low content. The experimental results reveal the potential of Mo₇O₂₄^6? intercalated LDHs to improve both the flame retardancy and smoke suppression of PUE. Copyright © 2015 John Wiley & Sons, Ltd.     

Synergistic flame retardant effect of melamine in ethylene–vinyl acetate/layered double hydroxides composites

Mg–Al–Fe ternary layered double hydroxides (LDHs) were synthesized based on Bayer red mud by a calcination–rehydration method, and characterized by X-ray diffraction (XRD) and thermogravimetric analysis (TG). The synergistic effects between melamine and LDHs in ethylene–vinyl acetate (EVA) composites were studied using limiting oxygen index (LOI), UL 94, cone calorimeter test (CCT), smoke density test (SDT), and thermogravimetry–fourier transform infrared spectrometry (TG–IR). Though melamine decreases the LOI values of EVA/LDHs/melamine composites, a suitable amount of melamine can apparently improve UL 94 rating; the composite with 45 % LDHs and 5 % melamine can pass UL 94 test. The CCTs results indicate that heat release rates (HRR) of EVA/LDHs/melamine composites decreased in comparison with that of EVA/LDHs composites. The SDT results show that melamine is helpful to smoke suppression. The TG–IR data show that the ternary composites have a higher thermal stability than that of the binary composites.