Conformational statistics of polymer chain terminally attached to wall (Ⅲ)——NRW model loop chain

When the two end groups of a linear polymer chain are absorbed on a solid surface,the polymer chain forms the "loop" conformation.Investigation has been made on the conformational statistics of a model loop chain by the normal landom walk (NRW) on a lattice confined in the half-infinite space.Based on the conformational distribution function of the NRW model tail chain,it is easy to deduce an analytical formula expressing the conforma-tional number of the model loop chain.It was found that the ratio of the conformational number of the model loop chain to that of the free chain varies with the power function N-2/3 when the chain length N→∞ The same result was obtained by means of the recursion equation.The ratio of the mean square end-to-end distance h2 for the model loop chain to its mean square bond length I2 is 2N/3 Compared with the free chain with the same length N,the mean square end-to-end distance of the model loop chain contracts to a certain extent.The basic relationships deduced were support     

Conformational statistics of polymer chain terminally attached to wall(Ⅱ)——SAW model tail chain

The SAW tail chains were studied.The permitted conformational number and the mean square end-to-end distance as a function of the chain length N for such a model tail chain were obtained by computer simulations,including the exact enumeration and Monte Carlo method.These two basic quantities obeyed the relations deduced from the scaling law.The critical exponents and the lattice indexes were given by fitting the data of the computer experiments.It has been shown that there is a certain extension in the size of the SAW tail chains as well as the NRW tail chains in the direction normal to the wall.The normal component of the mean square end-to-end distance is almost twice as large as the parallel component of the short chain SAW.However,as N→∞,the effect of the wall on the chain conformation becomes a little weak because of the self-avoiding behavior for the model.That is quite different from the case of the NRW tail chain.     

SCATTERING FUNCTION OF POLYMER BLENDS

For a system of flexible polymer molecules, the concepts of two concentrations, namely the segmental and the molecular concentrations, have been proposed in this paper. The former is equivalent to the volume fraction. The latter can be defined as the number of the gravity centers of macromolecules in a unit volume. The two concentrations should be correlated with each other by the conformational function of the polymer chain and should be discussed in different thermodynamic equations. On the basis of these concepts it has been proved that the Flory-Huggins entropy of mixing should be the result of the mixing “ideal gases of the gravity centers of macromolecules“. The general correlation between the free energy of mixing and the scattering function (structural factor) of polymer blends has been studied based on the general fluctuation theory. When the Flory-Huggins free energy of mixing is adopted, the de Gennes scattering function of a polymer blend can be derived.     

How Does a Polymer Brush Repel Proteins？

The captioned question has been addressed by the steric effect; namely, the adsorption of proteins on a surface grafted with linear polymer chains decreases monotonically as the grafting density increases. However, there is no quantitative and satisfactory explanation why the adsorption starts to increase when the grafting density is sufficiently high and why polyethylene glycol（PEG） still remains as one of the best polymers to repel proteins. After considering each grafted chain as a molecular spring confined inside a ＂tube＂ made of its surrounding grafted chains, we estimated how its free energy depends on the grafting density and chain length, and calculated its thermal energy-agitated chain conformation fluctuation, enabling us to predict an adsorption minimum at a proper grafting density, which agrees well with previous experimental results. We propose that it is such a chain fluctuation that slows down the adsorption kinetically.     

Surface Modification of Nano－SiO2 by Grafting PMMA／PBA

The surface of nano-SiO2 was modified by being encapsulated with hydroxy-propyl-methyl cellulose (HPMC), and then co-grafted with acrylates. The grafting conditions, such as pH of the medium, and initiator concentration have been studied. The modified nano-SiO2 particles were characterized by TEM, DSC and FT-IR spectra. TEM images show that the surface of the nano-particles has been successfully modified by a thick layer of film-like polymer in this way. The DSC results show that the decomposition temperature of modified nano-particles of SIO2 is 90 ℃ higher than that of grafted-on polymer. According to the FT-IR spectra, It is convinced that poly-methyl methacrylate ( PMMA ) and poly-acrylic butyl-ester ( PBA ) were co-grafted onto the surface of nano-SiO2.     

THE Θ-STATE OF A SINGLE HOMOPOLYMER CHAIN IN SOLUTION*

 It has been an established practice to estimate the Θ-temperature of a polymer solution from thedisappearance of the interchain interactions (A₂ = 0) Recently, in studies of the temperature dependence ofthe chain conformation in solution, we found that the change of the chain conformation clearly underwentthree different stages which could be viewed as the "gas". "liquid" and "solid" states in terms of the freedomof the "blobs" on the chain. The transition temperature between the first and second stages corresponds nicely to the Θ-temperature determined by the conventional method.It reveals,for the first time,that the Θ-temperature can be deduced from the conformation change of a single polymer chain in solution,which is important not only in conception,but also in practice.     

Numerical Simulation of the Distribution Function and Free Energy of a Single Wormlike Polymer Confined between Hard Walls

We focus on the distribution and free energy of a wormlike polymer confined between two parallel hard walls.The variation in the distribution and free energy of the wormlike chain as the spacing between the walls decreases(or as the total contour length of the wormlike chain increases or as the persistence length of the chain increases)is simulated.The main reason for these changes is a degradation of the long wormlike chain into a Gaussian long chain under weak confinement.     

Particle Shape Dependence of Rheological Behavior for Colloid-polymer Mixtures

The effect of particle shape on the rheological behavior of small particle-large polymer chain mixture solutions has been investigated with two model colloidal silica dispersions, one of which is ellipsoidal（BINDZIL20/440） and the other is spherical（TM40）. It was found that BINDZIL20/440 series showed shear-thickening at lower shear rates and had a lower upper limit in PEO concentration to demonstrate shear-thickening phenomena. The particle shape was identified as the major factor accounting for these differences. This work enables one to control the rheological behavior of colloid-polymer mixture through simply changing particle geometry instead of performing surface modifications, which could be especially useful in cases where only certain chemicals are allowed, for example in vivo applications.     

Prediction of the internal energy contribution of polydimethylsiloxane during elongation

Rubber elasticity theory is of fundamental importance in polymer science. The traditional theory is athermal, describing rubber deformation behavior as entropy elasticity without an internal energy contribution. It has been found experimentally, however, that the internal energy contribution is not zero. In the present study we have used conformational elasticity theory to calculate the internal energy contribution of polydimethylsiloxane (PDMS) and results obtained are consistent with a number of experimental observations.     

LAMELLAR STRUCTURE OF THERMOTROPIC LIQUID CRYSTALLINE POLYMERS

The lamellar structure of a thermotropic aromatic polyester with flexible spacer has beenstudied by using transmission electron microscopy. It was found that the lamellar structure couldbe observed in the crystalline samples of this semirigid polymer crystallized from different states.The thickness of lamellae is around 10 nm, which is similar to that of the conventional polymersof flexible chain molecules. The molecular chains in the lamellae are oriented in the thicknessdirection as determined by electron diffraction. The possibility of molecular chains folding in the lamellae has been discussed.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.