Pb7F12Br2:一个具有较高激光损伤阈值的潜在中红外非线性光学晶体材料

对一个含Pb的混合卤化物Pb₇F₁₂Br₂进行了合成及单晶结构与性能测试,并首次对它的各种与非线性光学材料相关的主要性能进行了研究。发现该化合物的光学带隙宽达4.32 eV,粉末激光损伤阈值为25 MW·cm^-2,高于同等测试条件下商品化红外非线性光学晶体材料AgGaS₂的粉末激光损伤阈值（<5.2 MW·cm^-2）,它的粉末倍频效应为KDP（KH₂PO₄）的1.5倍并能够实现相位匹配,红外透光范围宽为0.3~14μm,热分解温度超过650℃,展示了较好的综合性能。     

KBi4F13:一个具有高激光损伤阈值的中红外非线性光学材料

通过KF和Bi₂O₃在HF的水溶液中的水热反应合成了化合物KBi₄F₁₃,首次用X-射线单晶衍射技术鉴定了它的晶体结构。对它进行了XRD、ATR-FTIR、UV-Vis-NIR、TG、SHG测试。测试结果表明该化合物具有能够相位匹配的二阶非线性光学性能,其粉末倍频效应强度约为KDP的一半;粉末激光损伤阈值为120 MW·cm^-2,远远高于同等条件下测试的商品化红外非线性光学材料AgGaS₂的粉末激光损伤阈值(5 MW·cm^-2);粉末的红外吸收边可达20 μm;热分解温度为220℃。以上结果表明该物是有潜在应用价值的具有高激光损伤阈值的中红外非线性光学晶体材料。     

KBi4F13:一个具有高激光损伤阈值的中红外非线性光学材料

通过KF和Bi₂O₃在HF的水溶液中的水热反应合成了化合物KBi₄F₁₃,首次用X-射线单晶衍射技术鉴定了它的晶体结构。对它进行了XRD、ATR-FTIR、UV-Vis-NIR、TG、SHG测试。测试结果表明该化合物具有能够相位匹配的二阶非线性光学性能,其粉末倍频效应强度约为KDP的一半;粉末激光损伤阈值为120MW·cm^-2,远远高于同等条件下测试的商品化红外非线性光学材料AgGaS₂的粉末激光损伤阈值(5MW·cm^-2);粉末的红外吸收边可达20μm;热分解温度为220℃。以上结果表明该物是有潜在应用价值的具有高激光损伤阈值的中红外非线性光学晶体材料。     

疏水性对溶胶-凝胶SiO2薄膜抗真空污染及抗激光损伤能力的影响

以正硅酸乙酯作为前驱体,利用碱催化方式制备了SiO2溶胶,通过在溶胶中添加含疏水基团(-CH3)的六甲基二硅氮烷(HMDS)对溶胶进行改性,使用添加不同物质的量比HMDS改性后的溶胶用提拉法在K9基片上镀膜,获得了具有疏水性能的SiO2薄膜。采用自制接触角测量仪、紫外-可见-近红外分光光度计研究了薄膜的水接触角和透过率。测试了薄膜的激光损伤阈值,并观察了激光辐照后薄膜的损伤形貌。通过真空污染实验对薄膜的抗污染能力及抗激光损伤能力进行了研究。实验结果表明:经疏水改性的溶胶所镀制的薄膜激光损伤阈值由未改性样品的24.3 J·cm-2增加到37 J·cm-2(1 064 nm,10 ns),且抗真空污染能力大大加强:在真空环境下保存168 h后,未改性样品的峰值透过率下降了2%,而疏水改性后的样品峰值透过率仅下降了0.25%,并保持了较高的激光损伤阈值(30.8 J·cm-2)。     

单室固体氧化物燃料电池阴极材料La0.75Sr0.25Cr0.5Mn0.5O3的电化学性能研究

采用高温固相法制备了La0.75Sr0.25Cr0.5Mn0.5O3(LSCM)并利用XRD,SEM以及电化学阻抗谱(EIS)分别对粉体及电极进行研究。结果发现LSCM在C3H8-O2-N2混合气氛下能够保持很好的高温化学稳定性,且与电解质材料YSZ在1400℃空气气氛下不发生化学反应。电化学测试结果表明,阳极支撑型单室固体氧化物燃料电池Ni-YSZ|YSZ|LSCM在700℃、C3H8-O2-N2混合气氛下的短路电流密度达317 mA·cm-2,最大功率密度73 mW·cm-2。将LSCM与CGO形成梯度阴极,相同测试条件下,单室电池的短路电流密度为560 mA·cm-2,功率密度达到110 mW·cm-2,电池输出性能提高约50%。     

Cu2ZnSnS4纳米晶的制备及其三阶非线性光学性能的研究

以乙酰丙酮铜、醋酸锌、二氯亚锡、油胺和硫粉为前驱体,采用one-pot法合成出了单分散的Cu2ZnSnS4(CZTS)纳米晶.所得样品采用X射线粉末衍射仪(XRD),能量色散谱仪(EDS),透射电子显微镜(TEM),高分辨透射电子显微镜(HRTEM),光电子能谱仪(XPS),紫外-可见光谱仪(UV-vis)和Z-扫描(Z-scan)技术对其结构组成、形貌、性能等进行了表征.结果表明:所获得的产物为四方相结构的六边形CZTS纳米颗粒,直径约为10 nm.计算出尺寸大小为10 nm,13 nm的纳米晶的三阶非线性光学折射率γ(-1.08×10-15,-9.08×10-17 m2·W-1),三阶非线性光学吸收系数β(6.5×10-9,3.69×10-11 m·W-1)以及三阶非线性光学极化率χ(3)(1.49×10-9,4.35×10-10 esu).并探讨了CZTS纳米晶可能的形成机理,及引起三阶光学非线性发生变化的原因。     

In2S3量子点玻璃的制备及其三阶非线性光学性质

本文利用溶胶-凝胶法结合气氛控制合成了含In2S3量子点玻璃。利用X射线粉末衍射仪(XRD),X射线光电子能谱(XPS),透射电子显微镜(TEM),X射线能量色散谱(EDX),高分辨透射电子显微镜(HRTEM)以及选区电子衍射(SAED)对In2S3量子点在玻璃中的微结构进行了表征,同时,利用飞秒Z-scan技术详细地研究了该玻璃在800 nm处的三阶非线性光学性质。结果表明,尺寸分布在12～20 nm之间的In2S3四方晶系纳米晶已经在玻璃中形成,并且,该玻璃展示出了优异的三阶非线性光学性能,其三阶非线性光学折射率γ、吸收系数β和和极化率χ(3)分别为-2.04×10-18m2·W-1,8.26×10-12m·W-1,和1.61×10-20m2·V-2。     

(Pr0.9La0.1)2(Ni0.74Cu0.21Ga0.05)O4+δ纳米纤维阴极的制备及电化学性质

采用静电纺丝法制备了(Pr_(0.9)La_(0.1))_2(Ni_(0.74)Cu_(0.21)Ga_(0.05))O_(4+δ)(PLNCG)氧化物纳米纤维。利用热重-差热分析(TG-DTA)、X射线衍射(XRD)、傅里叶变换红外光谱(FT-IR)和扫描电子显微镜(SEM)对材料的物相及微观形貌进行分析。研究表明950℃煅烧5 h得到平均直径420 nm、形貌均一的PLNCG氧化物纤维;1 000℃烧结2 h得到紧密附着在Ce_(0.9)Gd_(0.1)O_(2-δ)(CGO)电解质上的网状结构纤维阴极。电化学阻抗谱(EIS)测试结果表明纳米纤维阴极具有比粉体阴极更优越的性能。700℃的极化电阻(RP)为0.134Ω·cm~2,比同组分的粉末阴极减少32%(RP=0.197Ω·cm~2)。以纤维阴极构筑的电解质支撑单电池Ni-CGO/CGO/PLNCG在700℃的最大输出功率密度为231 m W·cm-2。氧分压测试结果表明阴极反应的速率控制步骤为电荷转移过程。     

(Pr0.9La0.1)2(Ni0.74Cu0.21Ga0.05)O4+δ-Ce0.9Gd0.1O2-δ复合阴极的制备及电化学性质

采用EDTA-柠檬酸盐法制备了(Pr0.9La0.1)2(Ni0.74Cu0.21Ga0.05)O4+δ(PLNCG),并与Ce0.9Gd0.1O2-δ(CGO)形成复合阴极PLNCG-CGO。XRD和SEM分析结果表明PLNCG与CGO在1 000℃具有较好的化学相容性。电化学阻抗测试结果表明PLNCG-30%CGO复合阴极在700℃的极化电阻为0.092Ω·cm2;过电位为39.3 m V时,电流密度达到113.3 m A·cm-2。氧分压分析表明电极反应的速率控制步骤为电荷转移过程。阳极支撑单电池(Ni-CGO/CGO/PLNCG-30%CGO)在700℃的最大输出功率密度达到569 m W·cm-2,开路电压(OCV)为0.76 V。     

AgYb(IO_3)_4:一个新的中红外非线性光学材料的合成、晶体结构和性能研究

本文通过水热反应合成了一种新化合物Ag Yb(IO3)4,用X射线单晶衍射技术鉴定了其晶体结构.该晶体属于单斜晶系,空间群为Cc,晶胞参数a=31.216(6)?,b=5.5379(11)?,c=12.475(2)?;a=g=90°,b=91.172(3)°;V=2151.6(7)?~3;Z=8.通过X射线衍射(XRD)、能量弥散X射线(EDX)、傅里叶变换衰减全反射红外(ATR-FTIR)、紫外-可见吸收(UV-Vis)、热重分析(TG)、倍频效应(SHG)等技术测试了其综合性能.该化合物具有较强的能够相位匹配的二阶非线性光学性能,其粉末倍频效应强度约为KDP(KH_2PO_4)的5倍;其较宽的带隙(3.35 e V)表明它应该有较高的激光损伤阈值;其粉末的红外吸收边可达12μm;其还具有良好的热稳定性能,热分解温度可达500℃.以上结果表明,Ag Yb(IO_3)_4是一种有潜在应用价值的中红外非线性光学晶体材料.     

Phase relations in the K2W2O7-K2WO4-KPO3-Bi2O3 system and structure of K6.5Bi2.5W4P6O34

The phase relations in the cross-section of the K₂W₂O₇-K₂WO₄-KPO₃ containing 15 mol% Bi₂O₃ were undertaken using flux method. Crystallization fields of K_6.5Bi_2.5W₄P₆O₃₄, K₂Bi(PO₄)(WO₄), Bi₂WO₆, KBi(WO₄)₂ and their cocrystallization areas were identified. Novel phase K_6.5Bi_2.5W₄P₆O₃₄ was characterized by single-crystal X-ray diffraction: sp. gr. P−1, a=9.4170(5), b=9.7166(4), c=17.6050(7) Å, α=90.052(5)°, β=103.880(5)° and γ=90.125(5)°. It has a layered structure, which contains {K₇Bi₅W₈P₁₂O₆₈}_∞ layers stacked parallel to ab plane and sheets composed by potassium atoms separating these layers. Sandwich-like {K₇Bi₅W₈P₁₂O₆₈}_∞ layers are assembled from [W₂P₂O₁₃]_∞ and [BiPO₄]_∞ building units, and are penetrated by tunnels with K/Bi atoms inside. FTIR-spectra of K₂Bi(PO₄)(WO₄) and K_6.5Bi_2.5W₄P₆O₃₄ were discussed on the basis of factor group theory.     

Sol-gel synthesis of K3InF6 and structural characterization of K2InC10O10H6F9, K3InC12O14H4F18 and K3InC12O12F18

K₃InF₆ is synthesized by a sol-gel route starting from indium and potassium acetates dissolved in isopropanol in the stoichiometry 1:3, with trifluoroacetic acid as fluorinating agent. The crystal structures of the organic precursors were solved by X-ray diffraction methods on single crystals. Three organic compounds were isolated and identified: K₂InC₁₀O₁₀H₆F₉, K₃InC₁₂O₁₄H₄F₁₈ and K₃InC₁₂O₁₂F₁₈. The first one, deficient in potassium in comparison with the initial stoichiometry, is unstable. In its crystal structure, acetate as well as trifluoroacetate anions are coordinated to the indium atom. The two other precursors are obtained, respectively, by quick and slow evaporation of the solution. They correspond to the final organic compounds, which give K₃InF₆ by decomposition at high temperature. The crystal structure of K₃InC₁₂O₁₄H₄F₁₈ is characterized by complex anions [In(CF₃COO)₄(OH_x)₂]^(5−2x)− and isolated [CF₃COOH_2−x]^(x−1)− molecules with x=2 or 1, surrounded by K⁺ cations. The crystal structure of K₃InC₁₂O₁₂F₁₈ is only constituted by complex anions [In(CF₃COO)₆]³⁻ and K⁺ cations. For all these compounds, potassium cations ensure only the electroneutrality of the structure. IR spectra of K₂InC₁₀O₁₀H₆F₉ and K₃InC₁₂O₁₂F₁₈ were also performed at room temperature on pulverized crystals.     

KCl-KBO2-K2CO3, K2MoO4-KBO2-K2CO3, and K2WO4-KBO2-K2CO3 ternary systems

phase diagrams of KCl-KBO₂-K₂CO₃, K₂MoO₄-KBO₂-K₂CO₃, and K₂WO₄-KBO₂-K₂CO₃ ternary systems were studied by a calculation-experimental method and differential thermal analysis (DTA). The coordinates of ternary eutectics were determined to be E ₁: 622°C, 8.5 mol % KBO₂, 56.5 mol % KCl, and 35 mol % K₂CO₃; E ₂: 710°C, 23 mol % KBO₂, 43 mol % K₂CO₃, and 34 mol % K₂MoO₄; E ₃: 710°C, 23 mol % KBO₂, 43 mol % K₂CO₃, and 34 mol % K₂WO₄. The specific heats of melting of the eutectics were determined.     

Li2SO4-Na2SO4-H2O和Li2SO4- K2SO4-H2O溶液的体积性质

本文用高精度数字式振荡管密度计测定了288K至318K温度范围内Li₂SO₄ + Na₂SO₄ + H₂O和 Li₂SO₄ + K₂SO₄ + H₂O三元体系的密度。混合溶液的离子强度范围从0.1到4.5 mol.kg_–1,混合溶液中Na₂SO₄和K₂SO₄的离子强度分数为0.2,0.4,0.6和0.8。用密度实验值拟合得到了不同温度下Pitzer离子相互作用模型混合参数θ_V和 ψ_V,模型的计算值与实验值的偏差在±0.002 g.cm_–3以内。用Pitzer模型计算了不同离子强度下三元体系的混合体积。     

Solubility in the Na2Cr2O7-(NH4)2Cr2O7-K2Cr2O7-H2O system

Solubility in the Na₂Cr₂O₇-(NH₄)₂Cr₂O₇-K₂Cr₂O₇-H₂O four-component water-salt system at 25, 50, and 75°C was studied for the first time. Phase field boundaries for individual salts and potassium and ammonium dichromate solid solutions, monovariant lines, and invariant points were determined. Experimental data were used to optimize the looped isohydric process of potassium dichromate preparation involving additional salts.     

NaBO2-NaCl-Na2CO3, NaBO2- Na2CO3-NaMoO4, NaBO2- Na2CO3-NaWO4, and NaBO2-NaCl-Na2WO4 ternary systems

The phase diagrams of the NaBO₂-NaCl-Na₂CO₃, NaBO₂-Na₂CO₃-Na₂MoO₄, NaBO₂- Na₂CO₃-Na₂WO₄, and NaBO₂-NaCl-Na₂WO₄ ternary systems were studied by a calculation-experimental method and differential thermal analysis. The coordinates of ternary eutectics were determined: E ₁: 612°C, 16 mol % NaBO₂, 42 mol % NaCl, and 42 mol % Na₂CO₃; E ₂: 568°C, 12 mol % NaBO₂, 28 mol % Na₂CO₃, and 60 mol % Na₂MoO₄; E ₃: 575°C, 12 mol % NaBO₂, 32 mol % Na₂CO₃, and 56 mol % Na₂WO₄; E ₄: 628°C, 8 mol % NaBO₂, 20 mol % NaCl, and 72 mol % Na₂WO₄; and E ₅: 655°C, 9 mol % NaBO₂, 53 mol % NaCl, and 38 mol % Na₂WO₄.     

Extension of the La7Mo7O30 structural type with La7Nb3W4O30 and La7Ta3W4O30 compounds

Two compounds of formula La₇A₃W₄O₃₀ (with A=Nb and Ta) were prepared by solid-state reaction at 1450 and 1490 °C. They crystallize in the rhombohedric space group R-3 (No. 148), with the hexagonal parameters: , and , . The structure of the materials was analyzed from X-ray, neutron and electronic diffraction. These oxides are isostructural of the reduced molybdenum compound La₇Mo₇O₃₀, which are formed of perovskite rod along [111]. An order between (Nb, Ta) and W is observed.     

Theoretical study of polyoxide clusters B20O30, Al20O30, V20O50, Si20O30H20, and Si20O30F20

The structural, electronic, and vibrational characteristics and energies of the isolated polyoxide clusters B₂₀O₃₀, Al₂₀O₃₀, V₂₀O₅₀, Si₂₀O₃₀H₂₀, and Si₂₀O₃₀F₂₀ and their complexes with the H⁻ ion and ammonia complexes Al₂₀O₃₀ · nNH₃ have been calculated by the density functional theory B3LYP method with different basis sets. The computation results show that the symmetric closo structure I _h with oxygen bridges located above the centers of the faces of an empty [M₂₀] dodecahedron is more favorable for V₂₀O₅₀, Si₂₀O₃₀H₂₀, and Si₂₀O₃₀F₂₀. For B₂₀O₃₀, the cage closo isomer is also more favorable than the other isomers, but its structure is severely distorted as compared to a dodecahedron and has a symmetry close to C ₃ . For Al₂₀O₃₀, the I _h structure corresponds to a high-lying local minimum of the potential energy surface. For Al₂₀O₃₀, a set of unusual puckshaped isomers of symmetry C _i , with different numbers of four-coordinate atoms ^IVAl and three-coordinate atoms ^IIIO, was localized; these structures are more than 90 kcal/mol more favorable than the dodecahedron I _h . The most favorable isomer of Al₂₀O₃₀ contains twelve four-coordinate atoms ^IVAl and four five-coordinate atoms ^VAl. The energies of dissociation of the most favorable M₂₀O₃₀ clusters into the M₂O₃ (C _2v ) and M₄O₆ (T _d ) fragments and, in the case of Al₂₀O₃₀, also into the Al₈O₁₂ (O _h ) and Al₁₂O₁₈ (D _3d ) fragments, have been estimated. The conclusion has been drawn that these clusters can, in principle, exist and can be experimentally detected in the isolated state. Analogous calculations have been performed for ammonia complexes Al₂₀O₃₀ · nNH₃ with n varying from 1 to 20. The effect of solvation on the relative stability of the dodecahedral and puckshaped isomers of the Al₂₀O₃₀ cluster is observed. The isomers with ammonia molecules in their first coordination sphere become much closer to one another on the energy scale; however, the dodecahedron remains a considerably less favorable intermediate. Original Russian Text ? O.P. Charkin, N.M. Klimenko, D.O. Charkin, 2008, published in Zhurnal Neorganicheskoi Khimii, 2008, Vol. 53, No. 4, pp. 624–635.     

Li2O-TiO2-SiO2-P2O5和Li2O-TiO2-Al2O3-P2O5体系锂离子固体电解质的制备及性能研究

一些具有NASICON型网格结构的固体电解质具有高的电导率和好的稳定性,NASICON的意思是Na Super Ionic Conductor[1]。当NaZr2(PO4)3中P5 被Si4 部分取代时便可以得到具有NASICON结构的Na1 xZr2SixP3-xO12体系,其具有高的钠离子电导率。然而有相同结构的Li1 xZr2SixP3-xO12体系的离子电导率却很低,这是因为Li 半径太小,而NASICON三维网格结构的离子通道太大,两者不匹配而使电导率下降[2]。但当LiZr2(PO4)3中Zr4 被离子半径小些的Ti4 取代,所得LiTi2(PO4)3的通道就与Li 半径相匹配,适合于锂离子的迁移,从而使其电导率…     

Structural chemistry of Sr3Cr2WO9, Ca3Cr2WO9, and Ba3Cr2WO9

We have studied the preparation and crystallographic structure of three perovskite-type compounds: Sr₃Cr₂WO₉, cubic, the lattice parameter of which is a = 7.812Å; Ca₃Cr₂WO₉, tetragonal, the lattice parameters of which are a = 5.408 Å and c = 7.635Å; and Ba₃Cr₂WO₉, hexagonal, the lattice parameters of which are a = 5.691 Å and c = 13.957Å. We have compared these three structures and shown the relationship between the dimensions of the alkaline-earth metal and the existence of the different structures.