KBi4F13:一个具有高激光损伤阈值的中红外非线性光学材料

通过KF和Bi₂O₃在HF的水溶液中的水热反应合成了化合物KBi₄F₁₃,首次用X-射线单晶衍射技术鉴定了它的晶体结构。对它进行了XRD、ATR-FTIR、UV-Vis-NIR、TG、SHG测试。测试结果表明该化合物具有能够相位匹配的二阶非线性光学性能,其粉末倍频效应强度约为KDP的一半;粉末激光损伤阈值为120 MW·cm^-2,远远高于同等条件下测试的商品化红外非线性光学材料AgGaS₂的粉末激光损伤阈值(5 MW·cm^-2);粉末的红外吸收边可达20 μm;热分解温度为220℃。以上结果表明该物是有潜在应用价值的具有高激光损伤阈值的中红外非线性光学晶体材料。     

Pb7F12Br2:一个具有较高激光损伤阈值的潜在中红外非线性光学晶体材料

对一个含Pb的混合卤化物Pb₇F₁₂Br₂进行了合成及单晶结构与性能测试,并首次对它的各种与非线性光学材料相关的主要性能进行了研究。发现该化合物的光学带隙宽达4.32 eV,粉末激光损伤阈值为25 MW·cm^-2,高于同等测试条件下商品化红外非线性光学晶体材料AgGaS₂的粉末激光损伤阈值（<5.2 MW·cm^-2）,它的粉末倍频效应为KDP（KH₂PO₄）的1.5倍并能够实现相位匹配,红外透光范围宽为0.3~14μm,热分解温度超过650℃,展示了较好的综合性能。     

BiVO4的添加对Nd0.2Ce0.8O1.9电解质微观结构和性能的影响

采用溶胶凝胶法制备BiVO₄（BV）和Nd_0.2Ce_0.8O_1.9（NDC）粉末,研究BV的加入对NDC电解质结构、形貌及电性能的影响。实验结果表明,NDC-5BV电解质的微观结构更致密,700℃时总电导率（σ_t）提高至3.35×10^-2 S·cm^-1,极化电阻（R_p）降低34%以上。单电池在700℃时的最大功率密度（MPD）为514 mW·cm^-2,开路电压（OCV）在70 h内可以保持良好的长期稳定性。     

Zn掺杂Co9S8纳米材料的制备及其在超级电容器和电催化析氢中的应用

采用原位溶剂热生长法设计合成了锌掺杂Co₉S₈纳米颗粒。各种表征技术和性能测试结果表明：锌掺杂Co₉S₈纳米颗粒的孔尺寸为18 nm,比表面积为23 m²·g^-1;同时微量的锌掺杂显著增强了Co₉S₈的电催化析氢（HER）活性及电容器性能。在HER性能测试中,当电流密度为10 mA·cm^-2时电位为-361 mV,电流密度最高可达38.26 mA·cm^-2,且具有优异的循环稳定性。同时在电容器性能测试中具有较高的比电容,当电流密度为1 A·g^-1时,质量比电容和面积比电容分别为235.48 F·g^-1和812.4 mF·cm^-2。     

(Pr0.9La0.1)2(Ni0.74Cu0.21Ga0.05) O4+δ纳米纤维阴极的制备及电化学性质

采用静电纺丝法制备了（Pr_0.9La_0.1）₂（Ni_0.74Cu_0.21Ga_0.05）O_4+δ（PLNCG）氧化物纳米纤维。利用热重-差热分析（TG-DTA）、X射线衍射（XRD）、傅里叶变换红外光谱（FT-IR）和扫描电子显微镜（SEM）对材料的物相及微观形貌进行分析。研究表明950℃煅烧5 h得到平均直径420 nm、形貌均一的PLNCG氧化物纤维;1 000℃烧结2 h得到紧密附着在Ce_0.9Gd_0.1O_2-δ（CGO）电解质上的网状结构纤维阴极。电化学阻抗谱（EIS）测试结果表明纳米纤维阴极具有比粉体阴极更优越的性能。700℃的极化电阻（R_P）为0.134 Ω·cm²,比同组分的粉末阴极减少32%（R_P=0.197 Ω·cm²）。以纤维阴极构筑的电解质支撑单电池Ni-CGO/CGO/PLNCG在700℃的最大输出功率密度为231 mW·cm^-2。氧分压测试结果表明阴极反应的速率控制步骤为电荷转移过程。     

(Pr0.9La0.1)2(Ni0.74Cu0.21Ga0.05)O4+δ-Ce0.9Gd0.1O2-δ复合阴极的制备及电化学性质

采用EDTA-柠檬酸盐法制备了（Pr_0.9La_0.1）₂（Ni_0.74Cu_0.21Ga_0.05）O_4+δ（PLNCG）,并与Ce_0.9Gd_0.1O_2-δ（CGO）形成复合阴极PLNCG-CGO。XRD和SEM分析结果表明PLNCG与CGO在1 000℃具有较好的化学相容性。电化学阻抗测试结果表明PLNCG-30% CGO复合阴极在700℃的极化电阻为0.092 Ω·cm²;过电位为39.3 mV时,电流密度达到113.3 mA·cm^-2。氧分压分析表明电极反应的速率控制步骤为电荷转移过程。阳极支撑单电池（Ni-CGO/CGO/PLNCG-30% CGO）在700℃的最大输出功率密度达到569 mW·cm^-2,开路电压（OCV）为0.76 V。综上结果预示PLNCG-30% CGO复合阴极是一种有发展前景的电极材料。     

锂离子电池正极材料LiNi0.5Co0.4Al0.1O2的合成与性能

采用高温固相法制备了锂离子电池正极材料LiNi_0.5Co_0.4Al_0.1O₂,采用X射线衍射(XRD)、傅里叶红外光谱(FTIR)、扫描电子显微镜(SEM)对材料的结构及表观形貌进行分析。通过恒电流充放电以及循环伏安法进行了电化学性能测试。测试结果表明,充放电电压在3~4.5V之间,在0.2C倍率下首次放电比容量达到159.9mAh·g^-1,经50次循环充放电后放电容量为142.6mAh·g^-1,表现出良好的电化学性能。     

中温固体氧化物燃料电池阴极材料LaBiMn2O6的制备与性能

采用固相法合成了中温固体氧化物燃料电池(IT-SOFCs)阴极材料LaBiMn₂O₆,并利用X射线衍射(XRD)和电化学阻抗谱(EIS)进行表征。结果表明该材料与电解质Ce_0.7Bi_0.3O_1.85(CBO)在1000℃烧结12h不发生反应。交流阻抗和直流极化测试结果发现,阴极极化电阻随测试温度的增加而逐渐减小,700℃空气中的极化电阻为0.71Ω·cm²;氧分压测试结果显示,在600~700℃范围内,电极反应的速率控制步骤为电极上发生的电荷转移反应。电极过电位为85mV时,700℃的阴极电流密度达到216mA·cm^-2,表明LaBiMn₂O₆是一种潜在的中温固体氧化物燃料电池(IT-SOFCs)阴极材料。     

K2CdSnS4的溶剂热合成与晶体结构

利用溶剂热法合成了层状硫代锡(Ⅲ)酸镉(Ⅱ)化合物K₂CdSnS₄。单晶X-射线衍射分析结果表明,化合物属单斜晶系,C2/c空间群,a=1.1021(5)nm,b=1.1030(5)nm,c=1.5151(10)nm,α=90°,β=100.416(12)°,γ=90°,V=1.8114(17)nm³,Z=8,D_c=3.209g·cm^-3,M_r=437.60,μ=6.853mm^-1,F(000)=1600,λ=0.071073nm,R=0.1042,wR=0.2008。该化合物由类金刚烷[Cd₂Sn₂S₁₀]^8-结构单元互相连接形成层状结构。紫外-可见漫反射光谱研究表明,化合物为半导体,带隙为2.2eV。     

锂离子电池正极材料LiNi0.5Co0.4Al0.1O2的合成与性能

采用高温固相法制备了锂离子电池正极材料LiNi_0.5Co_0.4Al_0.1O₂。采用X射线衍射(XRD)、傅里叶红外光谱(FTIR)、扫描电子显微镜(SEM)对材料的结构及表观形貌进行分析。通过恒电流充放电以及循环伏安法进行了电化学性能测试。测试结果表明,充放电电压在3~4.5 V之间,在0.2C倍率下首次放电比容量达到159.9 mAh·g^-1,经50次循环充放电后放电容量为142.6 mAh·g^-1,表现出良好的电化学性能。     

Phase relations in the K2W2O7-K2WO4-KPO3-Bi2O3 system and structure of K6.5Bi2.5W4P6O34

The phase relations in the cross-section of the K₂W₂O₇-K₂WO₄-KPO₃ containing 15 mol% Bi₂O₃ were undertaken using flux method. Crystallization fields of K_6.5Bi_2.5W₄P₆O₃₄, K₂Bi(PO₄)(WO₄), Bi₂WO₆, KBi(WO₄)₂ and their cocrystallization areas were identified. Novel phase K_6.5Bi_2.5W₄P₆O₃₄ was characterized by single-crystal X-ray diffraction: sp. gr. P−1, a=9.4170(5), b=9.7166(4), c=17.6050(7) Å, α=90.052(5)°, β=103.880(5)° and γ=90.125(5)°. It has a layered structure, which contains {K₇Bi₅W₈P₁₂O₆₈}_∞ layers stacked parallel to ab plane and sheets composed by potassium atoms separating these layers. Sandwich-like {K₇Bi₅W₈P₁₂O₆₈}_∞ layers are assembled from [W₂P₂O₁₃]_∞ and [BiPO₄]_∞ building units, and are penetrated by tunnels with K/Bi atoms inside. FTIR-spectra of K₂Bi(PO₄)(WO₄) and K_6.5Bi_2.5W₄P₆O₃₄ were discussed on the basis of factor group theory.     

Sol-gel synthesis of K3InF6 and structural characterization of K2InC10O10H6F9, K3InC12O14H4F18 and K3InC12O12F18

K₃InF₆ is synthesized by a sol-gel route starting from indium and potassium acetates dissolved in isopropanol in the stoichiometry 1:3, with trifluoroacetic acid as fluorinating agent. The crystal structures of the organic precursors were solved by X-ray diffraction methods on single crystals. Three organic compounds were isolated and identified: K₂InC₁₀O₁₀H₆F₉, K₃InC₁₂O₁₄H₄F₁₈ and K₃InC₁₂O₁₂F₁₈. The first one, deficient in potassium in comparison with the initial stoichiometry, is unstable. In its crystal structure, acetate as well as trifluoroacetate anions are coordinated to the indium atom. The two other precursors are obtained, respectively, by quick and slow evaporation of the solution. They correspond to the final organic compounds, which give K₃InF₆ by decomposition at high temperature. The crystal structure of K₃InC₁₂O₁₄H₄F₁₈ is characterized by complex anions [In(CF₃COO)₄(OH_x)₂]^(5−2x)− and isolated [CF₃COOH_2−x]^(x−1)− molecules with x=2 or 1, surrounded by K⁺ cations. The crystal structure of K₃InC₁₂O₁₂F₁₈ is only constituted by complex anions [In(CF₃COO)₆]³⁻ and K⁺ cations. For all these compounds, potassium cations ensure only the electroneutrality of the structure. IR spectra of K₂InC₁₀O₁₀H₆F₉ and K₃InC₁₂O₁₂F₁₈ were also performed at room temperature on pulverized crystals.     

KCl-KBO2-K2CO3, K2MoO4-KBO2-K2CO3, and K2WO4-KBO2-K2CO3 ternary systems

phase diagrams of KCl-KBO₂-K₂CO₃, K₂MoO₄-KBO₂-K₂CO₃, and K₂WO₄-KBO₂-K₂CO₃ ternary systems were studied by a calculation-experimental method and differential thermal analysis (DTA). The coordinates of ternary eutectics were determined to be E ₁: 622°C, 8.5 mol % KBO₂, 56.5 mol % KCl, and 35 mol % K₂CO₃; E ₂: 710°C, 23 mol % KBO₂, 43 mol % K₂CO₃, and 34 mol % K₂MoO₄; E ₃: 710°C, 23 mol % KBO₂, 43 mol % K₂CO₃, and 34 mol % K₂WO₄. The specific heats of melting of the eutectics were determined.     

Li2SO4-Na2SO4-H2O和Li2SO4- K2SO4-H2O溶液的体积性质

本文用高精度数字式振荡管密度计测定了288K至318K温度范围内Li₂SO₄ + Na₂SO₄ + H₂O和 Li₂SO₄ + K₂SO₄ + H₂O三元体系的密度。混合溶液的离子强度范围从0.1到4.5 mol.kg_–1,混合溶液中Na₂SO₄和K₂SO₄的离子强度分数为0.2,0.4,0.6和0.8。用密度实验值拟合得到了不同温度下Pitzer离子相互作用模型混合参数θ_V和 ψ_V,模型的计算值与实验值的偏差在±0.002 g.cm_–3以内。用Pitzer模型计算了不同离子强度下三元体系的混合体积。     

Solubility in the Na2Cr2O7-(NH4)2Cr2O7-K2Cr2O7-H2O system

Solubility in the Na₂Cr₂O₇-(NH₄)₂Cr₂O₇-K₂Cr₂O₇-H₂O four-component water-salt system at 25, 50, and 75°C was studied for the first time. Phase field boundaries for individual salts and potassium and ammonium dichromate solid solutions, monovariant lines, and invariant points were determined. Experimental data were used to optimize the looped isohydric process of potassium dichromate preparation involving additional salts.     

NaBO2-NaCl-Na2CO3, NaBO2- Na2CO3-NaMoO4, NaBO2- Na2CO3-NaWO4, and NaBO2-NaCl-Na2WO4 ternary systems

The phase diagrams of the NaBO₂-NaCl-Na₂CO₃, NaBO₂-Na₂CO₃-Na₂MoO₄, NaBO₂- Na₂CO₃-Na₂WO₄, and NaBO₂-NaCl-Na₂WO₄ ternary systems were studied by a calculation-experimental method and differential thermal analysis. The coordinates of ternary eutectics were determined: E ₁: 612°C, 16 mol % NaBO₂, 42 mol % NaCl, and 42 mol % Na₂CO₃; E ₂: 568°C, 12 mol % NaBO₂, 28 mol % Na₂CO₃, and 60 mol % Na₂MoO₄; E ₃: 575°C, 12 mol % NaBO₂, 32 mol % Na₂CO₃, and 56 mol % Na₂WO₄; E ₄: 628°C, 8 mol % NaBO₂, 20 mol % NaCl, and 72 mol % Na₂WO₄; and E ₅: 655°C, 9 mol % NaBO₂, 53 mol % NaCl, and 38 mol % Na₂WO₄.     

Extension of the La7Mo7O30 structural type with La7Nb3W4O30 and La7Ta3W4O30 compounds

Two compounds of formula La₇A₃W₄O₃₀ (with A=Nb and Ta) were prepared by solid-state reaction at 1450 and 1490 °C. They crystallize in the rhombohedric space group R-3 (No. 148), with the hexagonal parameters: , and , . The structure of the materials was analyzed from X-ray, neutron and electronic diffraction. These oxides are isostructural of the reduced molybdenum compound La₇Mo₇O₃₀, which are formed of perovskite rod along [111]. An order between (Nb, Ta) and W is observed.     

Li2O-TiO2-SiO2-P2O5和Li2O-TiO2-Al2O3-P2O5体系锂离子固体电解质的制备及性能研究

一些具有NASICON型网格结构的固体电解质具有高的电导率和好的稳定性,NASICON的意思是Na Super Ionic Conductor[1]。当NaZr2(PO4)3中P5 被Si4 部分取代时便可以得到具有NASICON结构的Na1 xZr2SixP3-xO12体系,其具有高的钠离子电导率。然而有相同结构的Li1 xZr2SixP3-xO12体系的离子电导率却很低,这是因为Li 半径太小,而NASICON三维网格结构的离子通道太大,两者不匹配而使电导率下降[2]。但当LiZr2(PO4)3中Zr4 被离子半径小些的Ti4 取代,所得LiTi2(PO4)3的通道就与Li 半径相匹配,适合于锂离子的迁移,从而使其电导率…     

Structural chemistry of Sr3Cr2WO9, Ca3Cr2WO9, and Ba3Cr2WO9

We have studied the preparation and crystallographic structure of three perovskite-type compounds: Sr₃Cr₂WO₉, cubic, the lattice parameter of which is a = 7.812Å; Ca₃Cr₂WO₉, tetragonal, the lattice parameters of which are a = 5.408 Å and c = 7.635Å; and Ba₃Cr₂WO₉, hexagonal, the lattice parameters of which are a = 5.691 Å and c = 13.957Å. We have compared these three structures and shown the relationship between the dimensions of the alkaline-earth metal and the existence of the different structures.     

Preparation and structure of NaSr0.5Al2B2O7 and NaCa0.5Al2B2O7

Two compounds NaSr_0.5Al₂B₂O₇ and NaCa_0.5Al₂B₂O₇, have been found to crystallize into a new structure type by Rietveld refinement from X-ray powder diffraction data. Their structure belongs to hexagonal space group P6₃/m, with lattice parameters of , for NaSr_0.5Al₂B₂O₇ and , for NaCa_0.5Al₂B₂O₇, respectively. The structure is built up by [Al₂B₂O₇]²⁻ double layer and Na⁺/Ca²⁺ or Na⁺/Sr²⁺ ions alternatively stacking along the c-axis. The sites in the inter-double layer are fully occupied jointly by Na and Ca or Sr, but the intra-double layer sites are only half occupied solely by Na. A mechanism of the transition of the structure from CaAl₂B₂O₇ to present structure type by replacing only 1% Ca by Na (2%) as observed by Chang and Keszler (Mater. Res. Bull. 33 (1998) 299) is also proposed.