二氧化硅-聚丙烯腈核-壳结构复合纳米粒子的制备与表征

以甲基丙烯酸-3-(三甲氧基硅基)丙酯改性的SiO2纳米粒子为种子,采用乳液聚合法制备了粒径分布较窄的SiO2-聚丙烯腈(SiO2-PAN)核-壳结构复合纳米粒子。采用动态光散射、傅里叶红外光谱、透射电镜和扫描电镜表征了复合纳米粒子的粒径及分布、组成、形态和结构,并研究了表面活性剂的加入方式、反应温度及交联剂的引入对制备SiO2-PAN复合纳米粒子的影响。结果表明:SiO2-PAN复合纳米粒子为核-壳结构。采用半连续加入表面活性剂的方法,可以成功抑制乳液聚合中次级粒子的生成。通过增加表面活性剂的初始加入量、加快表面活性剂的补加速率,或降低反应温度,可使SiO2-PAN复合纳米粒子的粒径变小。反应温度的降低以及交联剂的引入使SiO2-PAN复合纳米粒子的表面变得平滑。     

团聚纳米SiO_2在苯乙烯乳液聚合过程中的再分散过程及机理

用二氧化硅 (SiO2 )存在下的乳液聚合法制备了聚苯乙烯 (PSt) 纳米SiO2 复合材料 ,研究了苯乙烯(St)乳液聚合过程中团聚纳米SiO2 的解离与再分散过程及分散的机理 .发现商品纳米SiO2 粒子以团聚体形式存在 ,团聚体大小远超出纳米级范围 .随聚合时间的延长 ,St的转化率逐渐增加 ,而PSt SiO2 复合微胶囊的粒径逐渐减小 ,反应 12 0min后 ,转化率和复合微胶囊粒子的粒径趋于稳定 .透射电镜 (TEM)也显示PSt SiO2 复合微胶囊粒子具有海岛结构 ,而SiO2 粒子的粒径在纳米范围内 ,表明在乳液聚合过程中SiO2 团聚体被逐渐解离 ,并重新分散到纳米尺度 .红外光谱研究发现 ,在乳液聚合过程中 ,除生成PSt均聚物外 ,还在纳米SiO2 表面生成了PSt接枝共聚物 ,改善了无机纳米粒子与聚合物之间的界面相容性 .聚合过程中的反应热和剪切搅拌是团聚体被解离和重新分散的主要原因 ,而生成的聚合物起到隔离作用     

原子转移自由基聚合接枝改性纳米SiO2的研究进展

纳米SiO2粒子极易团聚,在有机介质中难以均匀分散,从而大大地限制了其优异性能的发挥,有必要对其进行化学改性处理。原子转移自由基聚合(atom transfer radical polymerization,ATRP)是对纳米SiO2粒子进行接枝改性的一种有效途径,通过ATRP对纳米SiO2粒子进行表面改性,可以制备集无机纳米粒子和聚合物的优点于一身的SiO2-聚合物复合材料,且接枝链的长度及分子量分布可控,拓展了纳米SiO2的应用领域。本文主要综述了ATRP、RATRP(reverse ATRP)、AGET ATRP(activators generated by electron transferATRP)和ARGET ATRP(activators regenerated by electron transfer ATRP)方法对纳米SiO2接枝改性的研究现状。     

具有双亲特性的水相哑铃型SiO2纳米粒子的制备

以纳米SiO2水溶胶为原料,3?氨丙基三乙氧基硅烷(APTES)和3?氯丙基三乙氧基硅烷(CPTES)为改性剂,在水基环境下分别对SiO2纳米粒子进行改性,得到了具有亲水特性的APTES改性SiO2粒子和具有亲油特性的CPTES改性SiO2粒子水溶胶。2种粒子按不同比例混合,利用接枝在SiO2粒子表面氨基和氯丙基的取代反应,使得2种具有亲水/亲油特性的改性SiO2纳米粒子偶联,制备了粒径为40~50 nm的哑铃型SiO2纳米粒子。并通过透射电镜(TEM)、傅里叶变换红外光谱(FT?IR)、X射线光电子能谱(XPS)以及动态光散射(DLS)等方法对其进行了系统表征。结果表明,2种粒子成功偶联形成了具有哑铃型结构的水相SiO2纳米粒子,该粒子两面具有不同的亲水性,粒径近似等于APTES改性SiO2粒子和CPTES改性SiO2粒子的粒径之和。     

橡胶／纳米无机粒子增韧增强环氧树脂的研究

综述了当前环氧树脂增韧增强改性的研究现状,详细介绍了弹性体增韧环氧树脂、无机纳米粒子改性环氧树脂、粘土改性环氧树脂、纳米SiO2改性环氧树脂以及弹性体／无机纳米粒子协同增韧增强环氧树脂的机理和实验方法。并对其实验结果进行了分析比较。     

纳米SiO_2粒子锚固偶氮引发剂及接枝聚甲基丙烯酸甲酯

对纳米SiO2 粒子锚固偶氮引发剂 ,进而引发甲基丙烯酸甲酯聚合而制备聚甲基丙烯酸甲酯(PMMA) 纳米SiO2 复合粒子进行了研究 .纳米SiO2 先用环氧型硅烷偶联剂处理 ,再与偶氮二氰基戊酸发生缩合反应而锚固上偶氮引发剂 ,通过差示扫描量热和元素分析证明了引发剂在纳米SiO2 表面的锚固 .通过改性纳米SiO2 存在下MMA的乳液聚合 ,制备得到了接枝率为 2 3 2 %、接枝效率为 36 1%的PMMA 纳米SiO2 复合粒子 .经乳液聚合后 ,纳米SiO2 粒子团聚程度减小 ,在水相中分散稳定 .     

聚丙烯酸丁酯接枝的纳米SiO2对聚甲醛的改性

采用原子转移自由基聚合法(ATRP)在纳米SiO2粒子表面接枝聚丙烯酸丁酯(PBA)制备了纳米复合粒子SiO2-g-PBA,并以此对聚甲醛(POM)进行改性. 通过红外光谱、热失重分析、透射电子显微镜及扫描电子显微镜等分析技术进行了表征. 结果,SiO2-g-PBA在POM中分散均匀,使POM/SiO2-g-PBA复合材料的缺口冲击强度明显高于POM及POM/ SiO2复合材料. 当SiO2-g-PBA纳米复合粒子的质量分数为2%时,POM/SiO2-g-PBA复合材料的冲击强度达71.2 kJ/m2,较纯POM提高了7倍多,同时拉伸强度也有一定的提高,达到68.1 MPa.     

可聚合纳米SiO2杂化材料的制备及其性能研究

利用异佛尔酮二异氰酸酯(IPDI)和纳米SiO2表面-OH基团反应的特点,制备了表面含-NCO基团的纳米SiO2,用端羟基聚丙二醇醚(PPG)对其扩链并进一步和丙烯酸羟乙酯(HEA)反应,制备了丙烯酸酯封端、IPDI和PPG连接纳米SiO2粒子的纳米SiO2杂化材料.用红外光谱(FTIR)、热失重(TGA)和扫描电镜(...     

SiO2交联剂交联MMA聚合制备PMMA/SiO2纳米复合材料

用SiO2交联剂(SiO2HPA)交联甲基丙烯酸甲酯(MMA)自由基聚合制备PMMA SiO2纳米复合材料。采用两步法将可聚合乙烯基单体以化学键的形式键接到SiO2表面合成SiO2交联剂,首先利用过量的甲苯2,4二异氰酸酯(TDI)对SiO2纳米粒子表面进行化学修饰合成出表面带有高反应活性NCO基团的功能化SiO2粒子(SiO2TDI),SiO2TDI与丙烯酸羟丙酯(HPA)反应合成SiO2交联剂。系统研究了MMA单体与SiO2交联剂投料比及聚合时间对聚合反应的影响。此外,利用红外光谱(FT IR)、DSC、TGA、可见光光谱仪等实验手段对纳米复合材料进行了表征分析。结果表明,纳米SiO2粒子在复合材料中起着物理交联点和化学交联点作用,复合材料玻璃化转变温度(Tg)明显地高于其纯PMMA的玻璃化转变温度,随着纳米SiO2粒子含量的增加,复合材料玻璃化温度升高,而透明度明显降低。     

原子转移自由基聚合接枝改性纳米Si02的研究进展

纳米SiO2粒子极易团聚,在有机介质中难以均匀分散,从而大大地限制了其优异性能的发挥,有必要对其进行化学改性处理。原子转移自由基聚合（atom transfer radical polymerization,ATRP）是对纳米Si02粒子进行接枝改性的一种有效途径,通过ATRP对纳米SiOz粒子进行表面改性,可以制备集无机纳米粒子和聚合物的优点于一身的SiO2-聚合物复合材料,且接枝链的长度及分子量分布可控,拓展了纳米SiO。的应用领域。本文主要综述了ATRP、RATRP（reverse ATRP）、AGETATRP（activators generated by electron transfer ATRP）和ARGETATRP（activators regenerated by electron transferATRP）方法对纳米Si02接枝改性的研究现状。     

表面修饰纳米二氧化硅及其与聚合物的作用

本文综述了近几年国内外对纳米二氧化硅的表面化学修饰及其在聚合物基纳米复合材料中与基体作用方式的研究工作。对纳米SiO₂进行表面修饰可以改善纳米颗粒与聚合物基体间的亲和性,同时可以使纳米SiO₂表面功能化,有利于SiO₂与聚合物基体间形成强的结合力。纳米SiO₂与聚合物基体间可以以吸附力、氢键、共价键等方式结合,不同的结合方式对材料性能也会产生不同程度的影响。     

Preparation and characterization of nanocomposite polyurethane

Polyurethane/nanosilica composites were prepared using polyester polyol/nanosilica composite resins obtained from in situ polymerization or blending methods and investigated by Fourier transform infrared spectra (FTIR), dynamical mechanical analysis (DMA), transmittance electron microscopy (TEM), contact angle measurement, X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM), respectively. It was found that more polyester segments had chemically bonded with silica particles during in situ polymerization than during blending, introducing nanosilica increased the Tgs of polyurethanes, and different preparation methods and different particle sizes caused various impact on Tg. Contact angle measurement and XPS analyses indicated that nanosilica tended to move towards the surfaces and interfaces of polyurethane coats, decreasing the free energies of the surfaces and interfaces, but the nanosilica particles were just observed at interfaces not surfaces by AFM.     

Cone calorimeter analysis of flame retardant poly (methyl methacrylate)-silica nanocomposites

Nanocomposite is a promising method to reduce fire hazards of polymers. Specifically due to increased interfacial area between polymer and nanofillers, polymer nanocomposites have an advantage in reducing fire hazards efficiently even when the flame retardant additives are at a concentration of 5 mass% or less. In theory, crosslinking between the polymer chains can create a carbon-dense structure to enhance char formation, which can further promote the flame retardancy. However, little research has been done to explore the flammability of crosslinking polymer nanocomposites with a low concentration of nanosilica particles. In this study, crosslinked and non-crosslinked poly (methyl methacrylate) (PMMA) nanocomposites of a low concentration of nanosilica particles have been prepared via an in situ method. Their fire properties were tested by using the cone calorimeter at the heat flux of 50 kW m^?2. Although silica-containing flame retardants tend to negatively affect the ignitability and soot production especially at a high concentration, through the condensed phase mechanism, the samples of high loading rate of nanosilica particles show better fire retardancy performance in the aspect of flammability, including decreased heat release rate, mass loss rate, and total heat release. Additionally, crosslinking indeed attributes to the less intensive combustion of crosslinked PMMA samples, especially at a low concentration of nanosilica. The combination of nanosilica particles with the modification of the internal structure of the polymer nanocomposites might be a good strategy to improve fire retardancy.     

Synthesis of PVAc/SiO2 latices stabilized by silica nanoparticles

This paper presents a method for the preparation of raspberry-like organic-inorganic composite spheres with poly(vinyl acetate) (PVAc) as core and nanosilica particles as shell. A small amount of anionic reactive surfactant, 3-allyloxy-2-hydroxy-1-propanesulfonic acid sodium salt (HAPS), was used as co-stabilizer and nanosilica particles were adsorbed onto the growing latex core in aqueous medium via the formation of hydrogen bonds between nanosilica particles and PVAc particles. TEM indicated that the hydrogen bonds between nanosilica particles and PVAc were strong enough for the formation of long-stable composite spheres with raspberry-like morphology. Influences of some synthetic parameters, for instance, type of silica sol, initial silica amount, and different kinds of low-molecular-weight surfactant, on the morphology of the composite spheres and properties of the latex films were studied in detail. A possible formation mechanism of the composite spheres was also proposed.     

Progress in preparation,characterization, surface functional modification of graphene oxide: A review

Graphene oxide (GO) has become the focus of scientific research due to unique mechanical, optical, electrical and chemical properties. We review the synthesis approaches and formation mechanism of GO, and propose that the crucial factor to the preparation of GO is to find efficient and environmentally friendly oxidant. Various characterization techniques are introduced, and characteristics are summarized. The GO model theories are synopsized, and determining the structure of GO has important influence on its surface modification and its application and development in composite materials. The interaction and reaction types between GO matrix and modified molecules, as well as the properties of modified products were described. In conclusion, the present challenges and future research directions are presented in terms of preparation and surface functional modification for GO.     

金属氧化物电化学电容器

电化学电容器是一类利用电化学双电层或电极材料在电极表面及体相发生的氧化还原反应而存储能量的装置，具有高比能量、良好的可逆性和长循环寿命。金属氧化物电极目前主要有贵金属氧化物和过渡金属氧化物。本文简要介绍了金属氧化物电化学电容器的储能机理、特点及应用，总结了电极材料的制备及改性方法；并简要评述了电极材料的研究进展。     

功能化介孔材料在环境领域的应用研究进展

介孔材料是一种具有较大比表面积和高度有序孔道结构的材料,而功能化介孔材料是将介孔材料改性而使其具有不同的功能。这种材料由于具有极好的吸附和催化性能而被广泛应用于环境领域中。本文总结了功能化介孔材料的制备方法,包括引入官能团、掺杂金属和酸改性;探讨分析了几种制备方法下的功能化介孔材料的特点和应用前景;重点介绍了功能化介孔材料在吸附重金属、有机污染物、染料、CO2以及催化领域的研究进展;最后展望了未来功能化介孔材料的应用前景和发展趋势,以期为功能化介孔材料的发展提供参考和指明方向。     

Physical and optical properties of organo-modified silica nanoparticles prepared by sol–gel

A comparative study on the physical and optical properties of silica nanoparticles prepared by sol–gel has been carried out. Post-modification of as-synthesized silica nanoparticles produced organo-functionalized silica nanoparticles slightly increased in size (~20%) and relatively high aggregation. However, in situ method produced sixfold bigger functionalized particles with good dispersion and less aggregation. Higher organic content was observed for in situ modified nanosilica, leading to a higher surface hydrophobicity that improved compatibility and dispersion in preparation of silica-polymer nanocomposite. Furthermore, in situ and post-modified nanosilica demonstrated a distinct optical activity, photoluminescence and UV compared to the unmodified nanoparticles.     

二维石墨相氮化碳纳米片的制备及其在光催化领域的研究进展

二维(2D)层状石墨型氮化碳纳米片(CNNS)由于具有各向异性的2D几何形态和芳香族p-π共轭骨架,高度开放的平面结构、超高的比表面积、增强的电子迁移速率和与层厚度相关可调的半导体带隙等特征,是目前2D层状材料的研究热点之一。 本文综述了近年来氮化碳纳米片的各种制备方法、功能化改性和应用,涉及环保、能源转换及生物传感等领域。 最后指出进一步探索制备高质量氮化碳纳米片的新方法以及拓展其在光催化领域的应用是未来研究的重点。