新型超支化聚芳酰胺的合成及表征

以3，5—二硝基苯甲酰氯和对氨基苯甲酸为原料，经两步反应合成了新型AB2型单体4—(3，5-二氨基苯甲酰氨基)苯甲酸。在溶液中通过自缩聚反应合成了新型超支化聚芳酰胺，将其活性端氨基与酰氯反应，经原位改性合成了五种封端的超支化聚芳酰胺，并利用IR、^1HNMR、DSC及TG等方法对所合成的六种新型超支化聚合物的结构和性能进行了表征与测试。     

全芳型超支化聚酯的合成及端基改性

芳香聚合物;全芳型超支化聚酯的合成及端基改性     

超支化聚酯的改性及其结晶性能的研究

用十六酰氯和十八异氰酸酯分别对端羟基的超支化聚酯Boltorn^TMH20改性,可获得粉末状超支化低聚物,具有无定形“内核”及可结晶“外壳”的分子结构.实验结果表明,采用十八异氰酸酯改性的丙烯酸化超支化聚酯的熔点高于十六酰氯改性聚合物.     

脂肪型超支化聚酯的端基改性研究

近年来 ,超支化聚合物以其独特的结构和性能而受到广泛的重视 ,已成为 2 1世纪高分子科学研究的重要方向[1～ 4 ] .超支化聚合物通常是通过 AB2 型单体的缩聚来合成的 ,由于超支化聚酯的单体容易合成 ,因此 ,有关超支化聚酯的研究最为深入 .目前所报道的脂肪型超支化聚酯都是以 2 ,2 -二甲醇基丙酸为原料来合成的 ,Malstrom等 [5～ 7]系统研究了该聚合物的合成及结构 .最近 ,Johansson[8]采用丙烯酰氯对该聚合物端基改性 ,获得了可用于紫外光固化的涂料 ,但是所采用的合成及提纯方法都很复杂 ,并且需要很长的反应时间 .本文采用一种新的…     

新型功能性超支化聚酯的合成及表征

近年来 ,树枝状和超支化聚合物的研究受到了广泛重视 ,被视为 2 1世纪聚合物科学发展的重要方向[1] .这两种聚合物都有大量的端基 ,与相同分子量的线型聚合物相比 ,它们具有更低的粘度和更好的溶解性 .树枝状聚合物具有规整的结构 ,但合成困难 ;超支化聚合物的支化结构不完整 ,可以通过简单的一步聚合获得 ,因此 ,后者受到更广泛的重视 ,也最有可能实现工业化 [2 ,3] .通常 ,超支化聚合物是通过 ABx(x≥ 2 )型单体的缩聚合成的 ,通过改变超支化聚合物的组成、结构及对其端基进行功能修饰 ,可以制备多种具有特殊用途的新材料 ,在粘度改性剂…     

超支化聚硅氧基硅烷的合成及其表征

基于线性聚硅氧烷在国防、能源和化工等领域的广泛应用,具有新颖拓扑结构和大量功能性端基的超支化聚硅氧烷引起了国内外科学工作者的广泛兴趣[1~7].到目前为止,主要是采用水解缩聚的方法合成超支化单体,在铂系催化剂存在下进行硅氢加成反应或者在碱催化剂存在下进行质子转移聚合制备超支化聚合物[8~12].然而,以上合成超支化聚硅氧烷的方法仍然存在一定的不足.例如,水解法步骤繁琐,通常在第一步反应结束后需要多次除水,并继续滴加单氯硅烷以得到完全取代的大单体;同时多官能度单体容易水解自缩聚,产生A2B4或A3B6等副产物,不仅不利于结构控…     

一锅法合成含磺酸基超支化聚氨酯

N-三羟甲基甲基氨基乙磺酸(TES)的胺基与异佛尔酮二异氰酸酯(IPDI)环上活性较高的NCO在低温15℃下发生选择性反应,生成AB3型单体.随后提高反应温度(70～90℃),使AB3型单体原位聚合,一锅法合成出含磺酸基超支化聚氨酯.随着聚合温度的提高,超支化聚氨酯的支化度、分子量及分子量分布系数变大.90℃时,聚合产物的Mn为22410,支化度达到0.87.以此含磺酸基超支化聚氨酯为基础制得的聚合物电解质膜具有良好的耐热性、机械强度,其锂盐室温(约25℃)的离子电导率为3.1×10-5S/cm,100℃达到1.4×10-3 S/cm.     

端羧基芳脂型超支化聚酯自组装性能的研究

利用聚电解质逐层浸渍 ( layer- by- layer dipping)法制备自组装膜是最近发展起来的进行表面改性的新方法[1～ 3] .一方面 ,从理论上来说 ,只要是带电荷的聚合物都可以利用该技术制备具有优异性能的自组装膜 ;另一方面 ,还可以通过调节溶液的 p H值和离子强度等控制阴阳离子的组装过程 ,从而控制自组装膜的内部结构和表面形态 ,为在纳米级范围内设计和控制聚合物聚集态内部结构提供了可能性 .近年来 ,具有高度支化结构的超支化分子由于具有独特的物理和化学性能而受到了广泛的关注 [4 ,5] ,但以聚电解质逐层浸渍法制备超支化分子自组装膜…     

A_2和B_3单体重氮偶合反应制备超支化偶氮聚合物

利用A2/B3单体通过重氮偶合反应制备了超支化偶氮聚合物.利用核磁共振、红外光谱、紫外光谱和DSC热分析手段表征了聚合物的结构、光谱性能和玻璃化转变温度.合成的超支化偶氮聚合物具有很好的光响应性能,用488nm Ar+激光对超支化偶氮聚合物薄膜进行光加工,得到了规则的表面起伏光栅.     

Surface-relief-grating formation behavior of two hyperbranched azo polymers

In this work,surface-relief-grating formation behavior was studied by using two hyperbranched azo polymers.The hyperbranched polymers containing pseudo-stilbene type azo chromophores throughout the hyperbranched structure were synthesized by step-growth polycondensation of AB₂ type monomers.The AB₂ monomer,4-（4’-（bis（2-chloroethyl）amino）-phenylazo） benzoic acid（BAA）,was prepared through azo-coupling reaction between N,N’-bis（2-chloroethyl）aniline and 4- aminobenzenic acid.The another AB₂ monomer,4-（4’-（bis（2-chloroethyl）amino）phenylazo）-3-nitro-benzoic acid（BANA）, was prepared through azo-coupling reaction between N,N-bis（2-chloroethyl）aniline and 3-nitro-4-aminobenzcnic acid.The hyperbranched polymers（PBAA and PBANA） were prepared through nucleophilic substitution reaction of BAA and BANA, respectively.The polymers synthesized were characterized by using spectroscopic methods and thermal analysis.The photoinduced dichroism and photo-induced surface-relief-grating（SRG） formation of the hyperbranched polymers were investigated upon irradiation with Ar⁺ laser at 488 nm.PBAA shows typical photoinduced dichroism SRG formation behavior.On the contrary,PBANA does not show the photoresponsive properties.The results indicate that the nitro at the ortho position of azo group of PBANA shows the effect of inhibiting the photoinduced variations.The effect can be attributed to the blockage of the trans-cis isomerization of the azobenzene moieties by the steric hindrance.     

可控降解超支化聚碳硅氮烷的合成与表征

通过锂化四甲基二乙烯基二硅氮烷分别与甲基氢二氯硅烷和二甲基氢氯硅烷的亲核取代反应合成了AB4和AB2型单体AB4M和AB2M,两种单体通过Karstedt催化剂催化的硅氢加成反应分别生成聚碳硅氮烷PAB4M和PAB2M.单体和聚合物的结构通过FT-IR、1H-NMR、13C-NMR、29Si-NMR和体积排除色谱-多角度激光光散射联用(SEC-MALLS)技术进行了表征,结果表明,单体的结构与设计结构相符合;单体聚合时主要以α-硅氢加成方式为主;聚合物具有超支化结构并由N(Si—C)3链节和大量端基双键组成.PAB4M和PAB2M的重均分子量分别为7800和5860g/mol,分子量分布系数分别为2·54和2·31·对PAB4M稳定性的初步研究表明,该聚合物对氯硅烷和在中性条件下对水稳定,但在HCl水溶液中可以降解,且通过控制HCl浓度可以调节其降解速度,从而实现对其控制降解.     

Hyperbranched Aliphatic Polyester Grafted Calcium Carbonate Nanoparticles with a Real One‐Pot Method

The hyperbranched aliphatic polyester grafted calcium carbonate nanoparticles (HAPE‐CaCO₃), was successfully prepared by the real one‐pot method. The AB₂ monomer, 2,2‐bis(hydroxymethyl)propionic acid (bis‐MPA), was used as both the surface modifying agent and the monomer of the hyperbranched aliphatic polyester. It introduced the organic active group (hydroxyl group) onto the surfaces of the calcium carbonate nanoparticles (nano‐CaCO₃) and its polycondensation took place subsequently, with the catalysis of p‐toluenesulfonic acid (p‐TSA). The HAPE‐CaCO₃ had been characterized by elemental analysis (EA), Fourier transform infrared spectroscopy (FTIR), Thermogravimetric analysis (TGA), and transmission electron microscope (TEM).     

超支化聚硅碳烷-g-环糊精聚合物刷的合成与表征

通过硅氢加成反应和核多步法聚合合成出超支化聚硅碳烷(HBP),并对其端基进行了硅氢化、羟基化和酰氯化三步改性得到大分子引发剂HBP-Cl;再用其引发甲基丙烯酸N,N-二甲氨基乙酯(DMA)进行原子转移自由基聚合(ATRP),得到超支化聚硅碳烷-g-聚甲基丙烯酸N,N-二甲氨基乙酯(HBP-g-PDMA),最后将单-6-碘代β-CD通过离子键固载到PDMA链上,得到超支化聚硅碳烷-g-环糊精聚合物刷(HBP-g-PDMA-β-CD).采用FTIR、1H-NMR、13C-NMR、29Si-NMR对其结构进行了表征,利用凝胶渗透色谱/多角度激光光散射(SEC/MALLS)联用仪和激光粒度分析仪研究了其高分子的精细结构,并通过元素分析研究了固载时间对β-CD固载量的影响.     

超支化聚负离子/超支化聚正离子自组装膜的制备及反应

自1991年以来,静电吸附自组装已发展成为制备具有特定纳米微结构聚电介质多层超薄膜的有效技术。近年来,由于树枝状聚合物和超支化聚合物独特的物理化学性质,文献中已将它们与线性聚电解质一起用于静电吸附自组装过程,但完全基于超支化聚合物分子间的自组装过程还鲜见报道,超支化聚合物所具有的大量末端和内部（如叔胺基）官能团,不仅可以用于调节自组装行为及组装膜的表面形貌,     

Fluorinated modification of hyperbranched polyesters used for improving the surface property of UV curing coatings

The commercial hyperbranched aliphatic polyols (Hn) were modified by thioglycolic acid (TA) and hexafluorobutyl acrylate (HFBA) or dodecafluoroheptyl methacrylate (DFHMA) to prepare a series of fluorinated hyperbranched polyesters. For comparison, a linear fluorinated polymer, poly(n-BMA-co-DFHMA), was synthesized through the copolymerization of n-butyl methacrylate (BMA) and DFHMA. The molecular structures were characterized by ¹H NMR spectroscopic analysis. The synthesized polymers were incorporated into UV-curable formulations as additives, and exposed to a UV lamp. After UV curing, the wettability of the films was investigated by contact angle measurement with water and 1-bromonaphthalene. The results showed that both the hydrophobicity and oleophobicity were greatly enhanced. Moreover, the fluorinated hyperbranched polymers possessed better water and oil repellency than the copolymer poly(n-BMA-co-DFHMA) at a very low concentration. The surface F/C ratio values of the cured films were detected by XPS analysis, and the film with TAH20-DFHMA showed the highest F/C ratio value, indicating its most efficient aggregation effect at the film surface.     

Synthesis and characterization of a flame retardant hyperbranched polyether

<正>A brominated hyperbranched polyether has been synthesized from cyanuric chloride and sodium salt of tetrabromobisphenol-A by an A_2+B_3 approach.The synthesized polyether was characterized by ~1H-NMR,~(13)C-NMR,UV, FTIR spectroscopy and X-ray diffraction studies,measurements of solution viscosity,molecular weight and solubility and elemental and thermogravimetric analyses.The flame retardancy of the synthesized polyether and its blends with commercially available plasticized poly(vinyl chloride)(PVC) and low density polyethylene(LDPE) was investigated by measurements of limiting oxygen index(LOI) value and thermogravimetric analysis.The properties are compared with a non-halogenated similar type of bisphenol-A based aromatic polyether after blending at different dose levels with the same base polymers.The LOI values of these blends indicated that these hyperbranched polyethers acted as flame retardant additives,and antimony trioxide had prominent synergistic effect with the bromo hyperbranched polyether for the above base polymers,and an increment of 4 to 6 units in LOI values was observed.     

超支化聚碳硅氮烷的合成与表征

聚碳硅氮烷是一种新型含硅有机金属聚合物,其主链由硅氮碳连接而成,侧链为有机基团;与其它含硅聚合物(聚硅氮烷、聚碳硅烷等)类似,聚碳硅氮烷适于用做力学性能极佳且耐高温氧化的氮化硅(Si3N4)和氮化硅/碳化硅(Si3N4/SiC)复相陶瓷的前驱体.[1]超支化聚合物具有溶解性好、粘度低     

含芴共轭单元的超支化聚合物的合成及表征

以芴和季戊四醇为初始物,分别合成了具有芴共轭单元和季戊四醇多臂结构的两种聚合单体,进一步采用Suzuki反应合成出一种结构新颖的部分共轭结构的超支化聚合物.利用紫外吸收光谱和荧光发射光谱对聚合物予以表征,结果表明,超支化聚合物具有与模型化合物分子相似的发光行为,既可以发出纯正的蓝光,又表现出支化结构对荧光发射的影响.差...     

Fabrication of glucose biosensor for whole blood based on Au/hyperbranched polyester nanoparticles multilayers by antibiofouling and self-assembly technique

Acknowledging the benefits of hyperbranched polymers and their nanoparticles, herein we report the design and synthesis of sulfonic acid group functionalized hydroxyl-terminated hyperbranched polyester (H30-SO₃H) nanoparticles and their biomedical application. The H30-SO₃H nanoparticles were characterized by transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy and proton nuclear magnetic resonance spectroscopy (¹H NMR). The good hemocompatibility of H30-SO₃H nanoparticles was also investigated by coagulation tests, complement activation and platelet activation. The novel glucose biosensor was fabricated by immobilizing the positively charged Au nanoparticles, H30-SO₃H nanoparticles and glucose oxidase (GOx) onto the surface of glassy carbon electrode (GCE). It can be applied in whole blood directly, which was based on the good hemocompatibility and antibiofouling property of H30-SO₃H nanoparticles. The biosensor had good electrocatalytic activity toward glucose with a wide linear range (0.2–20 mM), a low detection limit 1.2 × 10⁻⁵ M in whole blood and good anti-interference property. The development of materials science will offer a novel platform for application to substance detection in whole blood.     

The amphiphilic multiarm copolymers based on hyperbranched polyester and lysine: Synthesis and self-assembly

The amphiphilic multiarm copolymers were synthesized through the modification of commercially available hyperbranched polyesters(Boltorn H40) with N-ε-carbobenzoxy-L-Lysine N-carboxyanhydride(ZLys-NCA).After being condensed with N-Boc-phenylalanine(Boc-~NPhe) and deprotected the Boc-groups in trifluoroacetic acid(TFA),the original terminal hydroxyl groups were transformed into the amino groups and then initiated the ring-opening polymerization of ZLys-NCA.The hydrophilic poly(L-lysine) was grafted to the surface of Boltorn H40 successfully after the protecting benzyl groups were removed by the HBr solution in glacial acetic acid(33 wt%).The resulting multiarm copolymers were characterized by the ~1H-NMR,GPC and FTIR.The arm length calculated by NMR and GPC analysis was about 3 and 13 lysine-units for H40-Phe-PLysl and H40-Phe-PLys2 respectively.Due to the amphiphilic molecular structure,they displayed ability to self-assemble into spherical micelles in aqueous solution with the average diameter in the range from 70 nm to 250 nm.The CMC of H40-Phe-PLysl and H40-Phe-PLys2 was 0.013 mg/mL and 0.028 mg/mL,respectively, indicating that H40-Phe-PLysl with shorter arm length is easier to self-assemble than H40-Phe-PLys2 with longer arm length.