Epoxy-based azo molecular glasses with four-arm architecture: Preparation,characterization and holographic recording

A series of epoxy-based azo molecular glasses with four-arm architecture was synthesized, characterized and applied to holographic recording.     

含双偶氮生色团的环氧树脂类聚合物的合成与表征

通过重氮偶合反应制备了含氨基取代基的假芪型偶氮小分子,并将其再配制成重氮盐,在极性溶剂中与含苯胺残基的环氧前体聚合物进行重氮偶合反应,制备了3种含双偶氮生色团的环氧树脂基聚合物BP-2A-35-CN、BP-2A-35-NT和BP-2A-35-2NT.利用仪器分析手段对其结构和热性能进行了表征;采用干涉激光辐照的方法,研究了不同取代基团对聚合物的光致表面起伏光栅形成过程的影响.研究结果表明,在相同光照条件下,BP-2A-35-CN和BP-2A-35-NT膜表面可形成正弦波形起伏光栅,但BP-2A-35-2NT膜表面无法形成明显的起伏结构.     

A_2和B_3单体重氮偶合反应制备超支化偶氮聚合物

利用A2/B3单体通过重氮偶合反应制备了超支化偶氮聚合物.利用核磁共振、红外光谱、紫外光谱和DSC热分析手段表征了聚合物的结构、光谱性能和玻璃化转变温度.合成的超支化偶氮聚合物具有很好的光响应性能,用488nm Ar+激光对超支化偶氮聚合物薄膜进行光加工,得到了规则的表面起伏光栅.     

New series of AB2‐type hyperbranched polytriazoles derived from the same polymeric intermediate: Different endcapping spacers with adjustable bulk and convenient syntheses via click chemistry under copper(I) catalysis

In this article, according to the concept of “suitable isolation group,” six new AB₂‐type polytriazoles containing azo‐chromophore moieties, derived from the same hyperbranched polymer intermediate, were successfully prepared through click reaction under copper(I) catalysis by modifying the synthetic route, in which different isolation groups in different size were introduced to the periphery of the hyperbranched polymers as end‐capping moieties. With the different end‐capping groups, these hyperbranched polymers, P1 – P6 , exhibited different solubility and processability; also, their nonlinear optical properties were modified accordingly, realizing the adjustment of the properties of hyperbranched polymers through the structural design. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

重氮偶合反应合成超支化偶氮聚合物的光响应性能研究

利用重氮偶合反应和后重氮偶合反应制备了主链和端基含有不同假芪型偶氮苯生色团的超支化偶氮聚合物.利用氢核磁共振、紫外光谱、红外光谱等分析手段确定了合成聚合物的结构、玻璃化转变温度和光谱特性等.研究了聚合物光致二向色性的性能,此聚合物的取向有序度为0.063.用两束相干的P偏振Ar+激光对聚合物膜进行光加工,得到形状规则的正弦波形表面起伏光栅,末端偶氮苯基团的引入极大地增加了超支化偶氮聚合物的光响应速度.     

Synthesis and properties of polyurethane elastomers crosslinked with amine-terminated AB2-type hyperbranched polyamides

Amine-terminated AB₂-type hyperbranched polyamides of different molecular weights were prepared from 3,5-bis-(4-aminophenoxy)benzoic acid (AB₂ monomer) by fractional precipitation technique and characterized by FTIR, ¹H-NMR spectroscopies, DSC and GPC techniques. The degree of branching (DB) of hyperbranched polymers (HBP) was determined using ¹³C-NMR spectroscopy and it was found that the value increased with decrease in molecular weight of polymer considered. As the molecular weight distribution was narrow, the approximate number of end functional groups of each HBP was conveniently calculated. Three polymers were selected and used as crosslinkers in the preparation of polyurethanes. The incorporation of hyperbranched polyamide into the polyurethane chains was confirmed using FTIR and ¹H-NMR spectroscopic techniques. Among the range studied (1-6%), it was found that high tensile strength is attained with 1% of HBP. It was also found that the tensile strength decreases with increase in number of end functional groups and decrease in DB of HBP. However, glass transition temperatures and thermal stability of polyurethanes crosslinked with up to 6% of HBP, above which gelation occurred, were not affected and similar to the blank polymer prepared without AB₂ polymer.     

Hydroxyl‐terminated hyperbranched aromatic poly(ether‐ester)s: Synthesis,characterization, end‐group modification,and optical properties

Novel AB₂‐type monomers such as 3,5‐bis(4‐methylolphenoxy)benzoic acid ( monomer 1 ), methyl 3,5‐bis(4‐methylolphenoxy) benzoate ( monomer 2 ), and 3,5‐bis(4‐methylolphenoxy)benzoyl chloride ( monomer 3 ) were synthesized. Solution polymerization and melt self‐polycondensation of these monomers yielded hydroxyl‐terminated hyperbranched aromatic poly(ether‐ester)s. The structure of these polymers was established using FTIR and ¹H NMR spectroscopy. The molecular weights (M_w) of the polymers were found to vary from 2.0 × 10³ to 1.49 × 10⁴ depending on the polymerization techniques and the experimental conditions used. Suitable model compounds that mimic exactly the dendritic, linear, and terminal units present in the hyperbranched polymer were synthesized for the calculation of degree of branching (DB) and the values ranged from 52 to 93%. The thermal stability of the polymers was evaluated by thermogravimetric analysis, which showed no virtual weight loss up to 200 °C. The inherent viscosities of the polymers in DMF ranged from 0.010 to 0.120 dL/g. End‐group modification of the hyperbranched polymer was carried out with phenyl isocyanate, 4‐(decyloxy)benzoic acid and methyl red dye. The end‐capping groups were found to change the thermal properties of the polymers such as T_g. The optical properties of hyperbranched polymer and the dye‐capped hyperbranched polymer were investigated using ultraviolet‐absorption and fluorescence spectroscopy. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5414–5430, 2008     

Epoxy-based azo polymers with high chromophore density: Synthesis,characterization and photoinduced birefringence

Three epoxy-based azo polymers(PEP-AZ-Cl,PEP-AZ-CN and PEP-AZ-NT) with high chromophore density were synthesized by using post-polymerization azo-coupling reactions between epoxy-based precursor polymer(PEP-AN) and diazonium salts of 4-chloroaniline,4-aminobenzonitrile and 4-nitroaniline,respectively.The structures and properties of the azo polymers were characterized by using ~1H-NMR,FT-IR,UV-Vis and thermal analyses.The photoinduced birefringence of the azo polymers was studied by irradiating spin-coated films of the polymers with laser beam at three different wavelengths(488,532,and 589 nm).The results indicate that the photoinduced birefringence of the azo polymers is related with the electron-withdrawing group on azo chromophores and the excitation wavelength.The excitation wavelength that can cause the efficient responses is determined by the absorption band positions of the azo chromophores,which are mainly affected by the electron-withdrawing group on the chromophores.Therefore,the azo polymers containing chromophores with different electron-withdrawing groups show different responsive behavior to the irradiation light at different wavelengths.When irradiated with 488 nm light,PEP-AZ-Cl shows the shortest time to reach the saturated birefringence but with the lowest saturation birefringence level compared with the other two azo polymers.When irradiated with 532 nm light,PEP-AZ-CN shows the shortest time to reach the saturated birefringence.When irradiated with 532 and 589 nm light,PEP-AZ-NT shows the highest saturation birefringence level.     

Synthesis and properties of hyperbranched polyurethanes,hyperbranched polyurethane copolymers with and without ether and ester groups using blocked isocyanate monomers

Starting from 3,5‐diamino benzoic acid, 2‐hydroxy propyl[3,5‐bis{(benzoxycarbonyl)imino}]benzyl ether, an AB₂‐type blocked isocyanate monomer with flexible ether group, and 2‐hydroxy propyl[3,5‐bis{(benzoxycarbonyl)imino}]benzoate, an AB₂‐type blocked isocyanate monomer with ester group, were synthesized for the first time. Using the same starting compound, 3,5‐bis{(benzoxycarbonyl)imino}benzylalcohol, an AB₂‐type blocked isocyanate monomer, was synthesized through a highly efficient short‐cut route. Step‐growth polymerization of these monomers at individually optimized experimental conditions results in the formation of hyperbranched polyurethanes with and without ether and ester groups. Copolymerizations of these monomers with functionally similar AB monomers were also carried out. The molecular weights of the polymers were determined using GPC and the values (M_w) were found to vary from 1.5 × 10⁴ to 1.2 × 10⁶. While hyperbranched polyurethanes having no ether or ester group were found to be thermally stable up to 217 °C, hyperbranched poly(ether–urethane)s and poly(ester–urethane)s were found to be thermally stable up to 245 and 300 °C, respectively. Glass transition temperature (T_g) of polyurethane was reduced significantly when introducing ether groups into the polymer chain, whereas T_g was not observed even up to 250 °C in the case of poly(ester–urethane). Hyperbranched polyurethanes derived from all the three different AB₂ monomers were soluble in highly polar solvents and the copolymers showed improved solubility. Polyethylene glycol monomethyl ether of molecular weight 550 and decanol were used as end‐capping groups, which were seen to affect the thermal, solution, and solubility properties of polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3877–3893, 2007     

Blends of different linear polyamides with hyperbranched aromatic AB2 and A2 + B3 polyesters

To explore the possible applications of hyperbranched polymers for modifying linear polyamides, two hyperbranched aromatic polyesters characterized as high T_g polymers possessing phenolic end groups were used in melt mixing with partly aromatic polyamide and commercially available aliphatic polyamide‐6, respectively. Different amounts of both hyperbranched polyesters (from 1 wt % up to 20 wt %) were added to the polyamides, and the influence of these hyperbranched polyesters on the properties of the polyamides was investigated. The hyperbranched polyester based on an AB₂ approach was found to be the most effective modifier. A significant increase of the glass transition temperature of the final blend was detected. However, a remarkable reduction of crystallinity as well as complex melt viscosity of those blends was also observed. The use of an A₂+B₃ hyperbranched polyester as melt modifier for the polyamides was less effective for changing the thermal properties, and the complex melt viscosity of the final material increased since heterogeneous blends were formed. In contrast to that, generally, the addition of the AB₂ hyperbranched polyester to the polyamides resulted in homogeneous blends with improved T_g and processability. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3558–3572, 2009     

Synthesis and properties of long‐chain branched poly(ether sulfone)s by self‐polycondensation of AB2 type macromonomers

Long‐chain branched poly(ether sulfone)s (PESs) were synthesized via self‐polycondensation of AB₂ macromonomers. The linear PES oligomers synthesized by self‐polycondensation of 4‐chloro‐4′‐(4‐hydroxyphenyloxy)diphenyl sulfone were terminated with 4‐(3,5‐methoxyphenoxy)‐4′‐fluorodiphenyl sulfone to form AB₂ macromonomer precursors. After conversion from methoxy to hydroxy groups, the AB₂ macromonomers were self‐polycondensed to form long‐chain branched PESs. NMR measurements support the formation of the target macromonomers ( = 2930–67,800 (g mol^?1); M_n = number average molecular weight) and long‐chain branched PESs. Gel permeation chromatography with multiangle light scattering measurements indicated the formation of high‐molecular‐weight (M_w) polymers over 10⁴. The root‐mean‐square radius of gyration (R_g) suggests that the shape of the long‐chain branched PES synthesized from small AB₂ macromonomers in solution is similar to that of hyperbranched polymers. Increasing resulted in larger R_g, suggesting a transition from hyperbranched to a linear‐like architecture in the resulting long‐chain branched PESs. Rheological measurements suggested the presence of strongly entangled chains in the long‐chain branched PES. Higher tensile modulus and smaller elongation at the break were observed in the tensile tests of the long‐chain branched PESs. It is assumed that the enhanced molecular entanglement points may act as physical crosslinks at room temperature. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1825–1831     

Synthesis of aromatic hyperbranched PAMAM polymers

Our preliminary results towards the synthesis of hyperbranched polyamidoamine (PAMAM) polymers as ‘dendrimer equivalents’ is described. An aromatic AB₂ bis-amino acid monomer was polymerised at 165 °C (under vacuum) and the crude mixture purified by dialysis. Analysis by GPC and MALDI-TOF mass spectroscopy showed that the purified hyperbranched polymers possessed an M_n of 2000 and a PD of 3.2.     

Mean‐Square Radius of Gyration and Degree of Branching of Highly Branched Copolymers Resulting from the Copolymerization of AB2 With AB Monomers

Summary: The evolution of the various structural units incorporated into hyperbranched polymers formed from the copolymerization of AB₂ and AB monomers has been derived by the kinetic scheme. The degree of branching was calculated with a new definition given in this work. The degree of branching monotonously increased with increasing A group conversion (x) and the maximum value could reach 2r/(1 + r)², where r is the initial fraction of AB₂ monomers in the total. Like the average degree of polymerization, the mean‐square radius of gyration of the hyperbranched polymers increased moderately with A group conversion in the range x < 0.9 and displayed an abrupt rise when the copolymerization neared completion. The characteristic ratio of the mean‐square radius of gyration remained constant for the linear polymers. However, the hyperbranched polymers did not possess this character. In comparison with the linear polymerization, the weight average and z‐average degree of polymerization increased due to the addition of the branched monomer units AB₂ and the mean‐square radius of gyration decreased quickly for the products of copolymerization.

     

Hyperbranched copolymers made from A2, B2 and BB′2type monomers (iv)

The new approach for synthesis of hyperbranched polymers from commercially available A₂ and type monomers was extended to synthesize hyperbranched copolymers. In this work, hyperbranched copoly(sulfone-amine) was prepared by copolymerization of divinyl sulfone (A₂) with 4,4′-trimethylenedipiperidine (B₂) and N-ethylethylenediamine (BB’₂). During the reaction, secondary-amino groups of B₂ and BB’₂ monomers react rapidly with vinyl groups of A₂ monomers within 35 s, generating a type of intermediate containing one vinyl group and two reactive hydrogen atoms. Now the intermediates can be regarded as a new type monomer, which further polymerizes to form hyperbranched copoly(sulfone-amine). The polymerization mechanism was investigated with FTIR and LC-MSD. The degree of branching (DB) of hyperbranched copolymers increased with decreasing the ratio of 4, 4′-trimethylenedipiperidine to N-ethylethylenediamine, so DB can be controlled. When the initial mole ratio of B₂ to BB′₂was equal to or higher than four,r≥4, resulted copolymers were semi-crystalline, while copolymers withr3 were amorphous.     

Conformation of nonideal hyperbranched polymer in ABn (n = 2, 4) type polymerization

The conformation of hyperbranched polymers from one pot polymerization with AB_n (n = 2, 4) type monomers, applying the reactive 3D bond fluctuation lattice model, are systematically studied using scaling relation R ～ N^λ, where R is the radius of gyration or the hydrodynamic radius of a hyperbranched polymer with the degree of polymerization N. The exponent λ was calculated at various monomer concentrations and group conversions. When the concentration of monomers with the equal reactivity of B groups increases from 0.1 to 0.9, the exponents λ_g and λ_h (corresponding to the radius of gyration and hydrodynamic radius, respectively) are in the ranges of 0.51–0.37 and 0.41–0.34 at the full conversion of A groups. Especially, we find that λ_g decreases linearly with the reaction conversion increasing. The ratio of z‐average radius, R_gz/R_hz, ranges from 1.08 to 1.32 and indicates that hyperbranched polymer is soft macromolecule with penetrable structure. In the case of AB₂ type monomer with unequal reactivities, λ displays complicated dependence on the reaction conversion and the reactivity ratio. The results of our simulation are consistent with those of experiments and theories, and valuable in better understanding the fundamental properties of hyperbranched polymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 610–616, 2010     

Synthesis and characterization of hyperbranched aromatic poly(ether imide)s with terminal amino groups

We synthesized an AB₂‐type monomer, 4‐{4‐[di(4‐aminophenyl)methyl]phenoxy}phthalic acid, which contained one phthalic acid group and two aminophenyl functionalities. The direct self‐polycondensation of the AB₂‐type monomer in the presence of triphenylphosphite as an activator afforded a hyperbranched poly(ether imide) with a large number of terminal amino groups. This polymer was characterized with ¹H NMR and IR spectroscopy. The degree of branching of the hyperbranched poly(ether imide) was approximately 56%, as determined by a combination of model compound studies and an analysis of ¹H NMR spectroscopy integration data. The terminal amino groups underwent functionalization readily. The solubility and thermal properties of the resulting polymers depended on the nature of the chain end groups. In addition, the hyperbranched poly(ether imide) was grafted with polyhedral oligomeric silsesquioxane (POSS). Transmission electron microscopy analysis revealed that the grafted POSS molecules aggregated to form a nanocomposite material. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3726–3735, 2003     

Synthesis of a novel one‐pot approach of hyperbranched polyurethanes and their properties

A new method for the synthesis of hyperbranched polymers involving the use of AB_x macromonomers containing linear units have been investigated. Two types of novel hyperbranched polyurethanes have been synthesized by a one‐pot approach. The structures of monomers and polymers were characterized by elemental analysis, ¹H NMR, ¹³C NMR, Fourier transform infrared spectroscopy, gel permeation chromatography, and thermogravimetric analysis. The hyperbranched polymers have been proven to be extremely soluble in a wide range of solvents. Polymer electrolytes were prepared with hyperbranched polymer, linear polymer as the host, and lithium perchlorate (LiClO₄) as the ion source. Analysis of the isotherm conductivity dependence of the ion concentration indicated that these hyperbranched polymers could function as a “solvent” for the lithium salt. The conductivity increased with the increasing concentration of hyperbranched polymers in the host polymer. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 344–350, 2002     

Supramolecular Thermoresponsive Hyperbranched Polymers Constructed from Poly(N‐Isopropylacrylamide) Containing One Adamantyl and Two β‐Cyclodextrin Terminal Moieties

Poly(N‐isopropylacrylamide) (PNIPAM) oligomer containing one adamantyl (AD) and two β‐cyclodextrin (β‐CD) moieties at the chain terminals, AD‐PNIPAM‐(β‐CD)₂, was synthesized by atom transfer radical polymerization (ATRP) and successive click reactions. In aqueous solution, AD‐PNIPAM‐(β‐CD)₂ spontaneously forms supramolecular thermoresponsive hyperbranched polymers via molecular recognition between AD and β‐CD moieties. To the best of our knowledge, this work represents the first report of the construction of supramolecular thermoresponsive hyperbranched polymers from well‐defined polymeric AB₂ building units.

     

Synthesis of multiblock hyperbranched‐linear poly(ether sulfone) copolymers

Hyperbranched poly(ether sulfone) was prepared in the presence of an oligomeric linear poly(ether sulfone) to generate multiblock hyperbranched‐linear (LxHB) copolymers. The LxHB copolymers were prepared in a two‐step, one‐pot synthesis by first polymerizing AB monomer to generate a linear block of a desired molecular weight followed by addition of the AB₂ monomer in a large excess (19:1, AB₂:AB) to generate the hyperbranched block. NMR integration analysis indicates that AB₂:AB ratio is independent of the reaction time. Because the molecular weight still increases with reaction time, these results suggest that polymer growth continues after consumption of monomer by condensation into a multiblock architecture. The LxHB poly(ether sulfone)s have better thermal stability (10% mass loss > 343 vs. 317 °C) and lower T_g (200 vs. > 250 °C) than the hyperbranched homopolymer, higher T_g than the linear homopolymer (<154 °C), while little difference in the solubility character was observed between the two polymers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4785–4793, 2008     

Convergent synthesis of dendrimers based on 1,3,3-trisubstituted 2-oxindoles

Dendrons and dendrimers were convergently prepared using an isatin as AB₂ monomer by superelectrophilic arylation in trifluoromethanesulfonic acid. This strategy has the advantage that incomplete reactions of the AB₂ monomer are minimized, thus simplifying purification. As the obtained dendrons/dendrimers are analogues of the hyperbranched polymers with a degree of branching of 100% developed earlier in our group, an opportunity is created to compare the latter with their structurally perfect counterparts.