RuCl_2[(S)-P-Phos]-[(S)-DAIPEN]催化芳香酮的不对称加氢反应

研究了钌-双膦-二胺配合物催化剂RuC1_2[(S)-P-Phos]-[(S)-DAIPEN][P-Phos:2,2',6,6'-四甲氧基-4,4'-双(二苯基膦基)-3,3'.二吡啶,DA肫N:1,1.二(4.甲氧苯基).2.异丙基.1,2.乙二胺]催化芳香酮不对称加氢反应的性能,考察了不同的碱、叔丁醇钾浓度、反应溶剂、底物/催化剂摩尔比等因素对反应活性和对映选择性的影响.在苯乙酮、叔丁醇钾、催化剂的摩尔比为1000:20:1,氢气压力为2 MPa,反应温度为30℃时,苯乙酮的转化率和α-苯乙醇的对映选择性(ee)分别达到了100%和88.5%,2'-溴苯乙醇的ee值町达97.1%.     

(1S, 2S)-DPEN修饰的负载型钌-铑双金属催化剂催化苯乙酮及其衍生物的不对称加氢

制备了以三苯基膦(PPh3)作为助剂的Ru-Rh/γ-Al2O3 催化剂, 在氢氧化钾的异丙醇溶液中, 用(1S, 2S)-DPEN [(1S, 2S)-1,2-diphenylethane-1,2-diamine]作手性修饰剂对苯乙酮及其衍生物进行不对称催化加氢, 此催化剂表现出较高的催化活性和良好的对映选择性. 优化反应条件, 苯乙酮、乙基苯基酮和异丙基苯基酮的转化率分别达到92.5%, 95.9%, 100%, 生成(R)-构型产物的ee值分别达到79.6%、81.2%和81.4%.     

聚[(S)-3-丙烯酰胺基-2,2'-二羟基-1,1'-联萘]的合成及催化二乙基锌与芳基醛不对称加成反应中的应用

通过自由基聚合得到聚[(S)-3-丙烯酰胺基-2,2'-二羟基-1,1'-联萘](poly-6),并将其应用于芳基醛和二乙基锌(Et2Zn)的不对称加成反应中.反应具有较好的对映选择性,ee值最高可达95%,且poly-6可以被回收重复使用6次保持催化活性基本不变.     

聚[(S)-3-乙烯基-2,2'-二羟基-1,1'-联萘]的钛配合物催化三乙基铝对醛的不对称加成反应

通过维蒂希反应合成了(S)-3-乙烯基-2,2'-甲氧甲氧基-1,1'-联萘.将单体(S)-3-乙烯基-2,2'-甲氧甲氧基-1,1'-联萘用偶氮二异丁腈作引发剂进行自由基聚合得到了聚[(S)-3-乙烯基-2,2'-二甲氧基甲氧基-1,1'-联萘].该聚合物上的MOM保护基通过酸脱除获得手性螺旋聚合物聚[(S)-3-乙烯基-2,2'-二羟基-1,1'-联萘].将手性螺旋聚合物聚[(S)-3-乙烯基-2,2'-二羟基-1,1'-联萘]与Ti(O-i-Pr)4形成的配合物应用于三乙基铝与醛的不对称加成反应中,获得了较好的对映选择性,ee值最高为85%.更重要的是,这种聚合物还可以被回收利用多次且催化活性没有明显降低.     

Ru-BDPX-DPEN催化芳香酮的不对称氢化反应

设计合成了一种新型的钌-双膦-手性二胺三元配合物RuC l2(BDPX)[(S,S)-DPEN][BDPX=邻-二(二苯基膦)甲苯,DPEN=1,2-二苯基乙二胺].利用此配合物作催化剂催化了苯乙酮和几种取代苯乙酮的不对称氢化反应;考察了多种因素对苯乙酮不对称氢化反应的转化率和ee值的影响.结果表明,此配合物对苯乙酮进行不对称氢化反应具有良好的催化性能和较高的对映选择性,在优化的条件下,当苯乙酮、配合物的摩尔比为20000?1时,其不对称氢化反应的转化率可达到100%,其ee值可达到59.0%;对取代苯乙酮的不对称氢化反应也具有一定的催化活性和中等的对映选择性.     

(1S,2S)-1,2-二苯基乙二胺修饰Ir/HAP催化苯乙酮及其衍生物的不对称加氢反应

采用浸渍法在温和条件下制备了羟基磷灰石负载的铱催化剂(Ir/HAP), 并以X射线衍射(XRD), 透射电子显微镜(TEM), X射线光电子能谱(XPS), 比表面积测定(BET)以及附带能量散射X射线谱的扫描电子显微镜(SEM-EDS)等手段对载体和催化剂进行了表征. 以(1S,2S)-1,2-二苯基乙二胺((1S,2S)-DPEN)为手性修饰剂时, 该催化剂对苯乙酮及其衍生物不对称加氢反应表现出较高活性和对映选择性(ee). 在氢气压力为3.0 MPa、303 K条件下反应3 h, 苯乙酮及其衍生物的加氢转化率在94.7%以上, 其中生成2'-(三氟甲基)苯乙醇的对映选择性高达81.5%. 在不使用其它配体作稳定剂的情况下, 该结果比目前文献报道值高. 通过对比研究发现, 羟基磷灰石作为载体优于二氧化硅等其它无机载体. 催化剂通过简单离心分离可循环使用多次, 无明显的金属铱流失.     

RuCl2(BISBI)[(R,R)-DPEN]催化苯乙酮不对称加氢反应研究

报道了配合物RuCl₂(BISBI)[(R,R)-DPEN] [BISBI＝2,2'-二(二苯膦亚甲基)-1,1'-联苯, DPEN＝1,2-二苯基乙二胺]的合成和表征, 并研究了其在苯乙酮不对称加氢反应中的催化性能. 考察了底物/催化剂物质的量比、碱浓度、反应温度和氢气压力等对催化活性和对映选择性的影响, 在苯乙酮/KOH/催化剂的物质的量比为30000∶250∶1, 氢气压力为2 MPa, 反应温度为35 ℃时, 苯乙酮的转化率和生成α-苯乙醇的对映选择性分别达到了100%和65% ee.     

(1S,2S)-DPEN修饰的Ir/Al2O3催化苯乙酮及其衍生物的不对称加氢反应$

在碱性条件下制备了三氧化二铝负载的铱(Ir/γ-Al2O3)催化剂,并用于苯乙酮及其衍生物的不对称催化加氢反应.考察了不同的碱、碱浓度、手性二胺(1S,2S)-1,2-二苯基乙二胺[(1S,2S)-DPEN]浓度、反应温度和反应压力对催化剂及反应的影响.结果显示,在优化反应条件下,该催化剂表现出较高的催化活性和良好的对映选择性,其中异丁酰苯不对称催化加氢反应的对映选择性达到了80.3%.该催化剂不需要使用任何稳定剂,制备方法简单,催化性能稳定,通过简单的离心分离即可循环使用.     

(1S,2S)-1,2-二苯基乙二胺修饰Ir/SiO_2催化苯乙酮及其衍生物不对称加氢(英文)

不添加任何稳定剂,在碱性条件下制备了5%Ir/SiO2催化剂,并用于催化苯乙酮的不对称加氢反应中,详细考察了碱和手性修饰剂种类、氢气压力、反应温度、(1S,2S)-1,2-二苯基乙二胺((1S,2S)-DPEN)浓度对反应的影响.在优化反应条件下,5%Ir/SiO2催化剂表现出较好的反应活性和对映选择性.其中,苯乙酮不对称加氢反应的对映选择性达70%.该催化剂不需要任何稳定剂,制备方法简单,催化性能稳定,通过简单的离心分离即可循环使用.     

Ru-(S)-BINAP/γ-Al2O3催化剂上苯乙酮及其衍生物的多相不对称加氢反应

 在温和条件下制备了Ru-(S)-BINAP/γ-Al2O3催化剂,考察了其催化苯乙酮及其衍生物不对称加氢的活性. 在KOH-异丙醇溶液中,在c(KOH)=0.04 mol/L,氢气压力5 MPa和10 ℃条件下,(1S,2S)-DPEN手性修饰剂修饰的Ru-(S)-BINAP/γ-Al2O3催化剂具有较高的活性和对映选择性,反应28 h后苯乙酮的转化率可达100%,(R)-苯乙醇的ee值可达75.0%.     

Reversal of enantioselectivity in the hydroformylation of styrene with [2S,4S-BDPP]Pt(SnCl3)Cl at high temperature arises from a change in the enantioselective-determining step

Deuterioformylation of styrene catalyzed by [(2S,4S)-BDPP]Pt(SnCl(3))Cl at 39 degrees C gave 3-phenylpropanal (3) and 2-phenylpropanal (2) (n:i = 1.8, 71% ee (S)-2) with deuterium only beta to the aldehyde carbonyl and in the formyl group. Small amounts of deuterium were also found in the internal (2.8%), cis terminal (1.4%), and trans terminal (1.3%) vinyl positions of the recovered styrene. Deuterioformylation of styrene at 98 degrees C gave 3- (3) and 2-phenylpropanal (2) (n:i = 2.3, 10% ee (R)-2) with deuterium both alpha and beta to the aldehyde carbonyl and in the formyl group. Deuterium was also found in the internal (20%), cis terminal (12%), and trans terminal (12%) vinyl positions of the recovered styrene. These deuterioformylation results establish that platinum hydride addition to styrene is largely irreversible at 39 degrees C but reversible at 98 degrees C. Hydroformylation of (E)- and (Z)-beta-deuteriostyrene at 40 degrees C, followed by oxidation of the aldehydes to acids, and subsequent derivitization to the (S)-mandelate esters confirmed that 84% of 2-phenylpropanal (2) arises from platinum hydride addition to the si-face of styrene, while 73% of 3-phenylpropanal (3) arises from platinum hydride addition to the re-face of styrene. At 100 degrees C, the effect of variable H(2) and CO pressure on n:i, % ee, and TOF of hydroformylation of styrene was investigated. The results are consistent with enantioselectivity not being fully determined until the final hydrogenolysis of a platinum acyl intermediate.     

Synthesis of N-methyl-N-[(1S)-1-[(3R)-pyrrolidin-3-yl]ethyl]amine

N-Methyl-N-[(1S)-1-[(3R)-pyrrolidin-3-yl]ethyl]amine (1)(1) is a key intermediate in the preparation of premafloxacin (2), which was under development as an antibiotic for use against pathogens of veterinary importance. This paper describes the development of a practical, efficient, and stereoselective process for the preparation of 1 from isobutyl (3S)-3-[methyl[(1S)-1-phenylethyl]amino]butanoate (5c). The key steps in the synthetic sequence are an asymmetric Michael addition, which yields 5c, and a stereoselective alkylation, which yields (3S,4S)-3-allyl-1,4-dimethylazetidin-2-one (17).     

硅-硫二元团簇[(SiS2)nS]-(n=1～4)的结构和稳定性的量子化学研究

用密度泛函（DFT）方法（B3LYP／6－31＋G^*)研究了硅硫团簇[(SiS2)nS]^-(n=1-4)的可能几何构型,得到各稳定构型的电子结构,并 相应的振动频率,预测了稳定构型的振动光谱,由其稳定构型的比较可在理论上预测团簇的生长规律,并可初步预测团簇的形成机理。     

Direct chemical synthesis of chiral methanol of 98% ee and its conversion to [(2)H1,(3)H]methyl tosylate and [(2)H1,(3)H-methyl]methionine

This paper describes the synthesis of chiral methanols [(R)- and (S)-CHDTOH] in a total of 12 steps starting from (chloromethyl)dimethylphenylsilane. The metalated carbamates derived from (dimethylphenylsilyl)methanol and secondary amines were borylated at low temperatures (-78 or -94 degrees C) using borates derived from tert-butyl alcohol and (+)-pinane-2,3-diol or (R,R)-1,2-dicyclohexylethane-1,2-diol to give diastereomeric boronates (dr 1:1 to 5:1). The carbamoyloxy group could be replaced smoothly with inversion of configuration by an isotope of hydrogen using LiAlH(D)4 [or LiBEt3H(D,T)]. If the individual diastereomeric boronates were reduced with LiAlD4 and oxidized with H2O2/NaHCO3, monodeuterated (dimethylphenylsilyl)methanols of ee > 98% resulted. The absolute configurations of the boronates were based on a single-crystal X-ray structure analysis. Brook rearrangement of the enantiomers of (dimethylphenylsilyl)-[(2)H1,(3)H]methanol prepared similarly furnished the chiral methanols which were isolated as 3,5-dinitrobenzoates in 81% and 90% yield, respectively. For determination of the enantiomeric excesses (98%), the methyl groups were transferred to the nitrogen of (S)-2-methylpiperidine and (3)H{(1)H} NMR spectra were recorded. The Brook rearrangement is a stereospecific process following a retentive course. The chiral methanols were also transformed into methyl tosylates used to prepare [(2)H1,(3)H-methyl]methionines in high overall yields (>80%).     

Optically active cyclohexene derivative as a new antisepsis agent: an efficient synthesis of ethyl (6R)-6-[N-(2-chloro-4-fluorophenyl)sulfamoyl]cyclohex-1-ene-1-carboxylate (TAK-242)

Two new synthetic methods were established for the efficient synthesis of optically active cyclohexene antisepsis agent, ethyl (6R)-6-[N-(2-chloro-4-fluorophenyl)sulfamoyl]cyclohex-1-ene-1-carboxylate [(R)-1: TAK-242)]. The first method involved recrystallization from methanol of the diastereomeric mixture (6RS,1'R)-7, obtained by esterification of carboxylic acid 3 with (S)-1-(4-nitrophenyl)ethanol [(S)-5)] to give the desired isomer (6R,1'R)-7 with 99% de in 32% yield. Subsequent catalytic hydrogenolysis and esterification gave (R)-1 with >99% ee. The second method employed enantioselective hydrolysis of acetoxymethyl ester 9a (prepared by alkylation of 3 with bromomethyl acetate) with Lipase PS-D to give the eutomeric enantiomer (R)-9a with excellent enantioselectivity (>99% ee) and high yield (48%). The desired (R)-1 was then obtained by transesterification with ethanol in the presence of concentrated sulfuric acid without loss of ee. Of these, the procedure employing enzymatic kinetic resolution using Lipase PS-D is the more efficient and practical preparation of (R)-1.     

Construction of symmetric and asymmetric Mo/S/Cu clusters from a cluster precursor [Et4N]2[(edt)2Mo2S2(mu-S)2] (edt = ethanedithiolate)

Treatment of [Et 4N] 2[(edt) 2Mo 2S 2(mu-S) 2] ( 1) (edt = ethanedithiolate) with equimolar CuBr afforded an anionic hexanuclear cluster [Et 4N] 2[(edt) 2Mo 2(mu-S) 3(mu 3-S)Cu] 2.2CH 2Cl 2 ( 2.2CH 2Cl 2). On the other hand, reactions of 1 with 2 equiv of CuBr in the presence of 1,2-bis(diphenylphosphino)methane (dppm) and pyridine (Py) ligands gave rise to two neutral tetranuclear clusters [(edt) 2Mo 2O 2(mu-S) 2Cu 2(dppm) 2] ( 3) and [(edt) 2Mo 2O(mu 3-S)(mu-S) 2Cu 2(Py) 4] ( 4), respectively. The reaction of 1 with 2 equiv of CuBr followed by the addition of a mixture of dppm and Py (molar ratio = 1:2) yielded another neutral tetranuclear cluster [(edt) 2Mo 2(mu-S) 2(mu 3-S) 2Cu 2(dppm)(Py)].Py ( 5.Py). Compounds 2- 5 have been characterized by elemental analysis, UV-vis spectra, IR spectra, (1)H NMR, and X-ray analysis. The structure of the dianion of 2 can be viewed as having a [Mo 4S 8Cu 2] core in which two chemically equivalent [Mo 2(mu-S) 3(mu 3-S)(edt) 2Cu] (-) anions are linked by two extra Cu-S edt bonds. The molecular structure of 3 may be visualized as being built of one [(edt) 2Mo 2X 2(mu-S) 2] (2-) dianion and one [Cu 2(dppm) 2] (2+) dication that are connected by a pair of M-mu-S edt bonds. Compound 4 is formed by the affiliation of two Cu(I) atoms only at one end of the [(edt) 2Mo 2S 2(mu-S) 2] moiety, connecting with the S t atoms and the S edt atom. Cluster 5.Py can be viewed as being constructed from the addition of one Cu atom onto the incomplete cubanelike [Mo 2S 4Cu] framework through one terminal sulfur and one edt sulfur. Among the four clusters, 3 and 4 have internal mirror symmetry or pseudo mirror symmetry, respectively, while 2 and 5 are asymmetric clusters with racemic formation.     

Gold(I)-catalyzed enantioselective hydroamination of N-allenyl carbamates

Treatment of the N-4,5-hexadienyl carbamate 2a with a catalytic 1:2 mixture of [(S)-1]Au2Cl2 [(S)-1 = (S)-3,5-t-Bu-4-MeO-MeOBIPHEP] and AgClO4 in m-xylene at -40 degrees C for 24 h led to isolation of 2-vinylpyrrolidine 3a in 97% yield with 81% ee. Gold(I)-catalyzed enantioselective hydroamination was effective for a number of carbamate groups and tolerated terminal disubstitutution of the allenyl moiety.     

Solvent- and temperature-controlled in situ ligand reactions mediated by Cu(II) and 3'-[(E)-{[(1S,2S)-2-aminocyclohexyl]imino}methyl]-4'-hydroxy-4-biphenylcarboxlic acid

Three new compounds, CuL, CuL', and Cu(2)O(2)L'(2) (H(2)L = 3'-[(E)-{[(1S,2S)-2-aminocyclohexyl]imino}methyl]-4'-hydroxy-4-biphenylcarboxlic acid, H(2)L' = 3'-[(E)-{[(1S,2S)-2-aminocyclohexyl]imino}methyl]-4'-hydroxy-5'-nitro-4-biphenylcarboxlic acid, H(2)L' = 3'-(N,N-dimethylamino methyl)-4'-hydroxy-4-biphenylcarboxlic acid), were selectively synthesized through a controlled in situ ligand reaction system mediated by copper(II) nitrate and H(2)L. Selective nitration was achieved by using different solvent mixtures under relatively mild conditions, and an interesting and economical reductive amination system in DMF/EtOH/H(2) O was also found. All crystal structures were determined by single-crystal X-ray diffraction analysis. Both CuL and CuL' display chiral 1D chain structures, whereas Cu(2)O(2)L'(2) possesses a structure with 13×16?? channels and a free volume of 41.4?%. The possible mechanisms involved in this in situ ligand-controlled reaction system are discussed in detail.