RuCl2[(S)-P-Phos]-[(S)-DAIPEN]催化芳香酮的不对称加氢反应

研究了钌-双膦-二胺配合物催化剂RuCl2[(S)-P-Phos]-[(S)-DAIPEN] [P-Phos: 2,2',6,6'-四甲氧基-4,4'-双(二苯基膦基)-3,3'-二吡啶, DAIPEN: 1,1-二(4-甲氧苯基)-2-异丙基-1,2-乙二胺]催化芳香酮不对称加氢反应的性能, 考察了不同的碱、叔丁醇钾浓度、反应溶剂、底物/催化剂摩尔比等因素对反应活性和对映选择性的影响. 在苯乙酮、叔丁醇钾、催化剂的摩尔比为1000:20:1, 氢气压力为2 MPa, 反应温度为30 ℃时, 苯乙酮的转化率和α-苯乙醇的对映选择性(ee)分别达到了100%和88.5%, 2'-溴苯乙醇的ee 值可达97.1%.     

(1S, 2S)-DPEN修饰的负载型钌-铑双金属催化剂催化苯乙酮及其衍生物的不对称加氢

制备了以三苯基膦(PPh3)作为助剂的Ru-Rh/γ-Al2O3 催化剂, 在氢氧化钾的异丙醇溶液中, 用(1S, 2S)-DPEN [(1S, 2S)-1,2-diphenylethane-1,2-diamine]作手性修饰剂对苯乙酮及其衍生物进行不对称催化加氢, 此催化剂表现出较高的催化活性和良好的对映选择性. 优化反应条件, 苯乙酮、乙基苯基酮和异丙基苯基酮的转化率分别达到92.5%, 95.9%, 100%, 生成(R)-构型产物的ee值分别达到79.6%、81.2%和81.4%.     

聚[(S)-3-丙烯酰胺基-2,2'-二羟基-1,1'-联萘]的合成及催化二乙基锌与芳基醛不对称加成反应中的应用

通过自由基聚合得到聚[(S)-3-丙烯酰胺基-2,2'-二羟基-1,1'-联萘](poly-6),并将其应用于芳基醛和二乙基锌(Et2Zn)的不对称加成反应中.反应具有较好的对映选择性,ee值最高可达95%,且poly-6可以被回收重复使用6次保持催化活性基本不变.     

聚[(S)-3-乙烯基-2,2'-二羟基-1,1'-联萘]的钛配合物催化三乙基铝对醛的不对称加成反应

通过维蒂希反应合成了(S)-3-乙烯基-2,2'-甲氧甲氧基-1,1'-联萘.将单体(S)-3-乙烯基-2,2'-甲氧甲氧基-1,1'-联萘用偶氮二异丁腈作引发剂进行自由基聚合得到了聚[(S)-3-乙烯基-2,2'-二甲氧基甲氧基-1,1'-联萘].该聚合物上的MOM保护基通过酸脱除获得手性螺旋聚合物聚[(S)-3-乙烯基-2,2'-二羟基-1,1'-联萘].将手性螺旋聚合物聚[(S)-3-乙烯基-2,2'-二羟基-1,1'-联萘]与Ti(O-i-Pr)4形成的配合物应用于三乙基铝与醛的不对称加成反应中,获得了较好的对映选择性,ee值最高为85%.更重要的是,这种聚合物还可以被回收利用多次且催化活性没有明显降低.     

Ru-BDPX-DPEN催化芳香酮的不对称氢化反应

设计合成了一种新型的钌-双膦-手性二胺三元配合物RuC l2(BDPX)[(S,S)-DPEN][BDPX=邻-二(二苯基膦)甲苯,DPEN=1,2-二苯基乙二胺].利用此配合物作催化剂催化了苯乙酮和几种取代苯乙酮的不对称氢化反应;考察了多种因素对苯乙酮不对称氢化反应的转化率和ee值的影响.结果表明,此配合物对苯乙酮进行不对称氢化反应具有良好的催化性能和较高的对映选择性,在优化的条件下,当苯乙酮、配合物的摩尔比为20000?1时,其不对称氢化反应的转化率可达到100%,其ee值可达到59.0%;对取代苯乙酮的不对称氢化反应也具有一定的催化活性和中等的对映选择性.     

(1S,2S)-1,2-二苯基乙二胺修饰Ir/HAP催化苯乙酮及其衍生物的不对称加氢反应

采用浸渍法在温和条件下制备了羟基磷灰石负载的铱催化剂(Ir/HAP), 并以X射线衍射(XRD), 透射电子显微镜(TEM), X射线光电子能谱(XPS), 比表面积测定(BET)以及附带能量散射X射线谱的扫描电子显微镜(SEM-EDS)等手段对载体和催化剂进行了表征. 以(1S,2S)-1,2-二苯基乙二胺((1S,2S)-DPEN)为手性修饰剂时, 该催化剂对苯乙酮及其衍生物不对称加氢反应表现出较高活性和对映选择性(ee). 在氢气压力为3.0 MPa、303 K条件下反应3 h, 苯乙酮及其衍生物的加氢转化率在94.7%以上, 其中生成2'-(三氟甲基)苯乙醇的对映选择性高达81.5%. 在不使用其它配体作稳定剂的情况下, 该结果比目前文献报道值高. 通过对比研究发现, 羟基磷灰石作为载体优于二氧化硅等其它无机载体. 催化剂通过简单离心分离可循环使用多次, 无明显的金属铱流失.     

RuCl2(BISBI)[(R,R)-DPEN]催化苯乙酮不对称加氢反应研究

报道了配合物RuCl₂(BISBI)[(R,R)-DPEN] [BISBI＝2,2'-二(二苯膦亚甲基)-1,1'-联苯, DPEN＝1,2-二苯基乙二胺]的合成和表征, 并研究了其在苯乙酮不对称加氢反应中的催化性能. 考察了底物/催化剂物质的量比、碱浓度、反应温度和氢气压力等对催化活性和对映选择性的影响, 在苯乙酮/KOH/催化剂的物质的量比为30000∶250∶1, 氢气压力为2 MPa, 反应温度为35 ℃时, 苯乙酮的转化率和生成α-苯乙醇的对映选择性分别达到了100%和65% ee.     

(1S,2S)-DPEN修饰的Ir/Al2O3催化苯乙酮及其衍生物的不对称加氢反应$

在碱性条件下制备了三氧化二铝负载的铱(Ir/γ-Al2O3)催化剂,并用于苯乙酮及其衍生物的不对称催化加氢反应.考察了不同的碱、碱浓度、手性二胺(1S,2S)-1,2-二苯基乙二胺[(1S,2S)-DPEN]浓度、反应温度和反应压力对催化剂及反应的影响.结果显示,在优化反应条件下,该催化剂表现出较高的催化活性和良好的对映选择性,其中异丁酰苯不对称催化加氢反应的对映选择性达到了80.3%.该催化剂不需要使用任何稳定剂,制备方法简单,催化性能稳定,通过简单的离心分离即可循环使用.     

(1S,2S)-1,2-二苯基乙二胺修饰Ir/SiO_2催化苯乙酮及其衍生物不对称加氢(英文)

不添加任何稳定剂,在碱性条件下制备了5%Ir/SiO2催化剂,并用于催化苯乙酮的不对称加氢反应中,详细考察了碱和手性修饰剂种类、氢气压力、反应温度、(1S,2S)-1,2-二苯基乙二胺((1S,2S)-DPEN)浓度对反应的影响.在优化反应条件下,5%Ir/SiO2催化剂表现出较好的反应活性和对映选择性.其中,苯乙酮不对称加氢反应的对映选择性达70%.该催化剂不需要任何稳定剂,制备方法简单,催化性能稳定,通过简单的离心分离即可循环使用.     

Ru-(S)-BINAP/γ-Al2O3催化剂上苯乙酮及其衍生物的多相不对称加氢反应

 在温和条件下制备了Ru-(S)-BINAP/γ-Al2O3催化剂,考察了其催化苯乙酮及其衍生物不对称加氢的活性. 在KOH-异丙醇溶液中,在c(KOH)=0.04 mol/L,氢气压力5 MPa和10 ℃条件下,(1S,2S)-DPEN手性修饰剂修饰的Ru-(S)-BINAP/γ-Al2O3催化剂具有较高的活性和对映选择性,反应28 h后苯乙酮的转化率可达100%,(R)-苯乙醇的ee值可达75.0%.     

Synthesis of N-methyl-N-[(1S)-1-[(3R)-pyrrolidin-3-yl]ethyl]amine

N-Methyl-N-[(1S)-1-[(3R)-pyrrolidin-3-yl]ethyl]amine (1)(1) is a key intermediate in the preparation of premafloxacin (2), which was under development as an antibiotic for use against pathogens of veterinary importance. This paper describes the development of a practical, efficient, and stereoselective process for the preparation of 1 from isobutyl (3S)-3-[methyl[(1S)-1-phenylethyl]amino]butanoate (5c). The key steps in the synthetic sequence are an asymmetric Michael addition, which yields 5c, and a stereoselective alkylation, which yields (3S,4S)-3-allyl-1,4-dimethylazetidin-2-one (17).     

硅-硫二元团簇[(SiS2)nS]-(n=1～4)的结构和稳定性的量子化学研究

用密度泛函（DFT）方法（B3LYP／6－31＋G^*)研究了硅硫团簇[(SiS2)nS]^-(n=1-4)的可能几何构型,得到各稳定构型的电子结构,并 相应的振动频率,预测了稳定构型的振动光谱,由其稳定构型的比较可在理论上预测团簇的生长规律,并可初步预测团簇的形成机理。     

A practical and improved synthesis of (3S,5S)-3-[(tert-butyloxycarbonyl)methyl]- 5-[(methanesulfonyloxy)methyl]-2- pyrrolidinone

A practical and improved synthesis of (3S,5S)-3-[(tert-butyloxycarbonyl)methyl]-5-[(methanesulfonyloxy)methyl]-2-pyrrolidinone (1) is described. The key transformations involve a highly efficient reaction sequence consisting of ethoxycarbonylation, alkylation, hydrolysis, and decarboxylation to produce compound 10. The process described herein is practical, robust, and cost-effective, and it has been successfully implemented in a pilot plant to produce a multikilogram quantity of mesylate 1.     

Stereoselective trimerization of [(S)R]-[(p-tolylsulfinyl)methyl]-p-quinols and p-quinamines

[reaction: see text] The asymmetric synthesis of pentacyclic derivatives was achieved in a single step starting from enantiopure [(S)R]-[(p-tolylsulfinyl)methyl]-p-quinols or the nitrogen analogue, through a domino sequence involving four conjugate additions in excellent yields. Eight new stereogenic centers were created in one step and in a highly diastereoselective manner.     

Construction of symmetric and asymmetric Mo/S/Cu clusters from a cluster precursor [Et4N]2[(edt)2Mo2S2(mu-S)2] (edt = ethanedithiolate)

Treatment of [Et 4N] 2[(edt) 2Mo 2S 2(mu-S) 2] ( 1) (edt = ethanedithiolate) with equimolar CuBr afforded an anionic hexanuclear cluster [Et 4N] 2[(edt) 2Mo 2(mu-S) 3(mu 3-S)Cu] 2.2CH 2Cl 2 ( 2.2CH 2Cl 2). On the other hand, reactions of 1 with 2 equiv of CuBr in the presence of 1,2-bis(diphenylphosphino)methane (dppm) and pyridine (Py) ligands gave rise to two neutral tetranuclear clusters [(edt) 2Mo 2O 2(mu-S) 2Cu 2(dppm) 2] ( 3) and [(edt) 2Mo 2O(mu 3-S)(mu-S) 2Cu 2(Py) 4] ( 4), respectively. The reaction of 1 with 2 equiv of CuBr followed by the addition of a mixture of dppm and Py (molar ratio = 1:2) yielded another neutral tetranuclear cluster [(edt) 2Mo 2(mu-S) 2(mu 3-S) 2Cu 2(dppm)(Py)].Py ( 5.Py). Compounds 2- 5 have been characterized by elemental analysis, UV-vis spectra, IR spectra, (1)H NMR, and X-ray analysis. The structure of the dianion of 2 can be viewed as having a [Mo 4S 8Cu 2] core in which two chemically equivalent [Mo 2(mu-S) 3(mu 3-S)(edt) 2Cu] (-) anions are linked by two extra Cu-S edt bonds. The molecular structure of 3 may be visualized as being built of one [(edt) 2Mo 2X 2(mu-S) 2] (2-) dianion and one [Cu 2(dppm) 2] (2+) dication that are connected by a pair of M-mu-S edt bonds. Compound 4 is formed by the affiliation of two Cu(I) atoms only at one end of the [(edt) 2Mo 2S 2(mu-S) 2] moiety, connecting with the S t atoms and the S edt atom. Cluster 5.Py can be viewed as being constructed from the addition of one Cu atom onto the incomplete cubanelike [Mo 2S 4Cu] framework through one terminal sulfur and one edt sulfur. Among the four clusters, 3 and 4 have internal mirror symmetry or pseudo mirror symmetry, respectively, while 2 and 5 are asymmetric clusters with racemic formation.     

含嘌呤、嘧啶类有机碱基的丁内酯的合成

利用天然手性助剂(-)-冰片所制得的手性源5-[(1s)-(-)-冰片氧基-2(5H)-呋喃酮差向异构体3a+3b与具有生理活性的嘌呤、嘧啶类有机碱基进行不对称Michael加成反应,得到了嘌呤、嘧啶类丁内酯非对映体混合物5a～5e及-5'a～5'e。报道了它们的合成方法以及IR、UV、^1HNMR、^1^3CNMR、MS、元素分析等结构分析数据。其中5d+5'd通过优势结晶拆分法得到单一的光学活性化合物。     

[(CH_3)_4N]_2Na[Mo_2O(S_2)_3S_5]·H_2O的合成和晶体结构

标题晶体属斜方晶系,空间群Pbn2_1,a=9.086(2),b=13.439(3),c=22.858(11),V=2791,Z=4,Dc=1.927g/cm~3。在CAD—4衍射仪上收集强度数据,采用直接法和Fourier技术解出结构,并用全矩降最小二乘法修正。对于1180个独立衍射最终偏离因子0.067。结构中的阴离子与其同系物[(CH_3)_4-N]_2K(Mo_2O(S_2)_3(NO)_2]·H_2O中的阴离子配位情况相似。只是结构中的Mo—S与Mo—O键长有差异。这种差异在两者的红外光谱上有着相应的表现。     

Synthesis of New 2-[(Substituted-pyrazolin-1-yl)carbonyl]-thieno[2,3-b]pyridine Derivatives

The reaction of 3-amino-4,6-dimethyl-2-thieno[2,3-b]pyridine carbohydrazide ( 1 ) with appropriate chalcones 2a-2d in the presence of acid catalyst produced the corresponding 3-amino-2-[(3,5-disubstituted-pyrazolin-1-yl)carbonyl]-4,6-dimethylthieno[2,3-b]pyridines 3a-3d . 3-Amino-2-[(3-substituted-pyrazolin-1-yl)carbonyl]-4,6-dimethylthieno[2,3-b]pyridines 7a, 7b were also obtained by the cyclization reaction of carbohydrazide 1 with Mannich base derivatives 6a, 6b under basic condition.     

Syntheses of the 47 electron clusters [(Cp*Fe)3(mu3-X)2] (X = S, Se) and the First Fe/Sn/Se Heterocubane Cluster [(CpFe)3(SnCl3)(mu3-Se)4] x DME by the use of chalcogenostannate salts

By reacting 1-aminoethylammonium (H2NCH2CH2NH3+ = enH+) salts of [Sn2E6]4- anions (E = S, Se), [enH]4[Sn2S6] (1) and [enH]4[Sn2Se6] x en (2), with FeCl2/LiCp, three novel (partly) oxidized, Cp* ligated iron chalcogenide clusters were synthesized. Two of them, [(CpFe)3(mu3-S)2] (3) and [(Cp*Fe)3(mu3-Se)2] (4), contain formally 47 valence electrons. [(Cp*Fe)3(SnCl3)(mu3-Se)4] x DME (5) represents the first known mixed metal Fe/Sn/Se heterocubane type cluster. Compounds 3-5 were structurally characterized by single-crystal X-ray diffraction, and the odd valence electron number of the [Fe3E2] clusters (E = S, Se) was confirmed by density functional (DFT) investigations, mass spectrometry, cyclic voltammetry and a susceptibility measurement of 3.