Li2O-TiO2-SiO2-P2O5和Li2O-TiO2-Al2O3-P2O5体系锂离子固体电解质的制备及性能研究

一些具有NASICON型网格结构的固体电解质具有高的电导率和好的稳定性,NASICON的意思是Na Super Ionic Conductor[1]。当NaZr2(PO4)3中P5 被Si4 部分取代时便可以得到具有NASICON结构的Na1 xZr2SixP3-xO12体系,其具有高的钠离子电导率。然而有相同结构的Li1 xZr2SixP3-xO12体系的离子电导率却很低,这是因为Li 半径太小,而NASICON三维网格结构的离子通道太大,两者不匹配而使电导率下降[2]。但当LiZr2(PO4)3中Zr4 被离子半径小些的Ti4 取代,所得LiTi2(PO4)3的通道就与Li 半径相匹配,适合于锂离子的迁移,从而使其电导率…     

[(NH2CH2CH2NH3)2WⅥO2(NHC6H4NH)2]2(NH2CH2CH2NH2)·H2O配合物的合成与晶体结构

Cis-dioxo-tungsten(Ⅵ) complex, (NH₂CH₂CH₂NH₂)[(NH₂CH₂CH₂NH₃)₂W^ⅥO₂(NHC₆H₄NH)₂]₂·H₂O is synthesized at room temperature by the reaction of sodium tungstate with o-phenylenediamine. The crystal structure of complex was determined by X-ray diffraction structural analysis. The results show that complex belongs to monoclinic system with space group P2₁/ c, a=0.712 8(2) nm, b=3.081 1(10) nm, c=0.981 9(3) nm, β=102.615(4)°, V=2.104 4(11) nm³, Z=2, μ=55.26 cm^-1, F(000)=1 176. Compared the complex with its analogous biomimetic complexes of the cofactor of molybdoenzymes and tungstoenzymses, it is found that the variance of the coordination atoms and the metal ions center have no influence on the coordination feature, and exhibits distored octahedral coordination with cis-dioxo o-phenylenediamine. CCDC: 252834.     

Li2SO4-Na2SO4-H2O和Li2SO4- K2SO4-H2O溶液的体积性质

本文用高精度数字式振荡管密度计测定了288K至318K温度范围内Li₂SO₄ + Na₂SO₄ + H₂O和 Li₂SO₄ + K₂SO₄ + H₂O三元体系的密度。混合溶液的离子强度范围从0.1到4.5 mol.kg_–1,混合溶液中Na₂SO₄和K₂SO₄的离子强度分数为0.2,0.4,0.6和0.8。用密度实验值拟合得到了不同温度下Pitzer离子相互作用模型混合参数θ_V和 ψ_V,模型的计算值与实验值的偏差在±0.002 g.cm_–3以内。用Pitzer模型计算了不同离子强度下三元体系的混合体积。     

新型层状磷酸铝[Al6P8O32][(C2H5)2NHCH2CH2NH3]2·[C2H5NH2CH2CH2NH2C2H5] 的合成、表征及其共模板作用

在溶剂热体系中,以N,N-二乙基乙二胺为结构导向剂,合成了Al/P为3/4的层状磷酸铝[Al6P8O32][(C2H5)2NHCH2CH2NH3]2·[C2H5NH2CH2CH2NH2C2H5]单晶,并通过X射线单晶衍射结构分析.XRD,ICP,元素分析,差热-热重分析等手段进行了表征.该化合物属单斜晶系,P2(1)/c空间群,晶胞参数:a=0.90945(2)nm,b=1.46424(4)nm,c=1.87572(5)nm,β=102.672(2)°,Z=4.其阴离子层由AlO4四面体和PO3(=O)四面体单元交替连接构成,形成四、六、八元环拓扑结构,无机层以ABAB方式堆积,两种质子化的有机胺分子N,N-二乙基乙二胺及其重排产物N,N′-二乙基乙二胺填充在层间.用分子动力学模拟方法,考察了标题化合物中有机胺与无机层间的相互作用,讨论了这两种有机胺的共模板作用.     

Li2O-Na2O-B2O3-SiO2烧结助剂对BaAl2Si2O8陶瓷结构与介电性能的影响

采用传统固相反应工艺,按化学计量比合成BaO-Al_2O3-SiO_2(BAS)-x%(w/w) Li_2O-Na_2O-B_2O3-SiO_2(LNBS)(x=0,1,2,3,4)陶瓷。研究不同LNBS烧结助剂添加量对BAS系微波介质陶瓷的结构和介电性能的影响。通过Clausius-Mossotti公式计算讨论了BAS理论与实验介电常数(εr)的差异。研究结果表明:LNBS烧结助剂中Li+进入钡长石Al3+位或单四元环(S4R)间隙,并产生了O_2-空位或Ba2+空位,从而促进BAS六方相向单斜相的转变。添加适量的LNBS烧结助剂后,BAS陶瓷的烧结温度从1 400℃降低到1 325℃,同时BAS陶瓷样品密度、品质因数(Qf)值以及频率温度系数(τf)得到改善。当x=1,烧结温度为1 325℃时,可获得综合性能相对较好的BAS陶瓷,其介电性能:Qf=35 199 GHz,εr=6.37,τf=-1.613×10-5℃-1。     

富勒烯配合物C60Pd(Ph2PCH2CH2CH2CH2PPh2)的合成和光电性能

本文在惰性气氛中通过取代反应合成出富勒烯金属配合物C₆₀Pd(Ph₂PCH₂CH₂CH₂CH₂PPh₂)，采用元素分析、红外光谱、紫外可见光谱、光电子能谱以及X射线粉末衍射等手段对产物进行表征,同时研究了产物的氧化还原性能及热稳定性能。此外，在光电化学电池中测定了C₆₀Pd(Ph₂PCH₂CH₂CH₂CH₂PPh₂)在GaAs电极上形成n+n型异质结的光伏效应，结果表明：产物具有优良的光电转化性能，尤其是在BQ/H2Q介质电对中，光生电压最大达到212 mV；当C₆₀Pd(Ph₂PCH₂CH₂CH₂CH₂PPh₂)薄膜厚度为1 μm时，光伏效应值最大。     

SO2F2/H2O2/碱和硫醚的氧化反应

考察了一种新型高效的氧化体系SO₂F₂/H₂O₂/碱应用于硫醚的氧化反应,结果以良好到优秀的收率生成了相应的产物砜.对该反应中碱和溶剂进行了优化,确定了最优的反应条件.对底物普适性进行了研究,实验结果表明该氧化体系显示了良好的官能团耐受性.该氧化体系的一个突出的优点是,所使用的试剂都为无机物,反应后副产物为易溶于水的无机盐和水,后处理时易于除去,从而大大简化了产物的分离和纯化.     

Solubility in the NaClO3 · 2CO(NH2)2-NH2CH2CH2OH-H2O system

The solubility in the NaClO₃ · 2CO(NH₂)₂-NH₂CH₂CH₂OH-H₂O system was studied over the range from the complete solidification temperature (−54.8°C) to 60°C. A polythermal solubility diagram was constructed where the regions of crystallization of ice, carbamide, sodium dicarbamidochlorate, monoethanolamine dihydrate, monoethanolamine monohydrate, and anhydrous monoethanolamine were demarcated. The system is a simple eutonic.     

P2O5对Li2O-SiO2-Al2O3-K2O-ZnO体系微晶玻璃析晶性能的影响

采用差热分析、X射线衍射及扫描电镜分析手段研究了P₂O₅对Li₂O-SiO₂-Al₂O₃-K₂O-ZnO体系牙科微晶玻璃析晶性能的影响, 并确定了P₂O₅的最适含量. 结果发现P₂O₅是该玻璃体系的有效成核剂, 未添加P₂O₅的玻璃体系成核密度低, 热处理后不能形成微晶体, 且主晶相为硅酸锂; 添加P₂O₅使玻璃在热处理后形成以二硅酸锂为主晶相的微晶玻璃. 该玻璃体系中添加4.5 wt%的P₂O₅可以得到较高体积含量和理想显微结构的牙科二硅酸锂微晶玻璃. P₂O₅含量为6 wt%的基质玻璃发生乳浊, 呈不透明的乳白色.     

分步沉淀对CeO2-ZrO2-Y2O3-La2O3材料热稳定性的影响

研究了传统沉淀法和分步沉淀对CeO₂-ZrO₂-Y₂O₃-La₂O₃(CZ)材料结构和性能的影响. N₂-吸/脱附、 OSC、 H2-TPR和催化剂三效活性等测试结果表明:分步沉淀所制备的CZ材料表现出更优的氧化还原性能和织构性能.基于此,继续优化分步沉淀中晶种的含量(10%、 50%、 90%),结果表明:较少的晶种诱导可以极大程度提高材料热稳定性能和织构性能,但进一步增加晶种含量对材料热稳定性能提升作用不明显.其中,当晶种量为10%时,所得CZ材料在高温焙烧后仍保持最大比表面积及稳定的立方相结构,表现出最好的织构性能和热稳定性能,其负载的单Pd三效催化剂也因此表现出最优的三效催化活性.     

KCl-KBO2-K2CO3, K2MoO4-KBO2-K2CO3, and K2WO4-KBO2-K2CO3 ternary systems

phase diagrams of KCl-KBO₂-K₂CO₃, K₂MoO₄-KBO₂-K₂CO₃, and K₂WO₄-KBO₂-K₂CO₃ ternary systems were studied by a calculation-experimental method and differential thermal analysis (DTA). The coordinates of ternary eutectics were determined to be E ₁: 622°C, 8.5 mol % KBO₂, 56.5 mol % KCl, and 35 mol % K₂CO₃; E ₂: 710°C, 23 mol % KBO₂, 43 mol % K₂CO₃, and 34 mol % K₂MoO₄; E ₃: 710°C, 23 mol % KBO₂, 43 mol % K₂CO₃, and 34 mol % K₂WO₄. The specific heats of melting of the eutectics were determined.     

Solubility in the Na2Cr2O7-(NH4)2Cr2O7-K2Cr2O7-H2O system

Solubility in the Na₂Cr₂O₇-(NH₄)₂Cr₂O₇-K₂Cr₂O₇-H₂O four-component water-salt system at 25, 50, and 75°C was studied for the first time. Phase field boundaries for individual salts and potassium and ammonium dichromate solid solutions, monovariant lines, and invariant points were determined. Experimental data were used to optimize the looped isohydric process of potassium dichromate preparation involving additional salts.     

The preparation of NbH5(Me2PCH2CH2Me2)2 and NbHL2(Me2PCH2CH2PMe2)2 (L = CO or C2H4)

MMe₅(dmpe) (M = Nb or Ta, dmpe = Me₂PCH₂CH₂PMe₂) reacts with H₂ (500 atm) and dmpe in THF at 60°C to give MH₅(dmpe)_2? NbH₅(dmpe)₂ readily reacts with two mol of CO or ethylene (L) to give NbHL₂(dmpe)₂. The exchange of the hydride ligand with the ethylene protons in NbH(C₂H₄)₂(dmpe)₂ is not rapid on the ¹H NMR time scale (60 MHz) at 95°C.     

NaBO2-NaCl-Na2CO3, NaBO2- Na2CO3-NaMoO4, NaBO2- Na2CO3-NaWO4, and NaBO2-NaCl-Na2WO4 ternary systems

The phase diagrams of the NaBO₂-NaCl-Na₂CO₃, NaBO₂-Na₂CO₃-Na₂MoO₄, NaBO₂- Na₂CO₃-Na₂WO₄, and NaBO₂-NaCl-Na₂WO₄ ternary systems were studied by a calculation-experimental method and differential thermal analysis. The coordinates of ternary eutectics were determined: E ₁: 612°C, 16 mol % NaBO₂, 42 mol % NaCl, and 42 mol % Na₂CO₃; E ₂: 568°C, 12 mol % NaBO₂, 28 mol % Na₂CO₃, and 60 mol % Na₂MoO₄; E ₃: 575°C, 12 mol % NaBO₂, 32 mol % Na₂CO₃, and 56 mol % Na₂WO₄; E ₄: 628°C, 8 mol % NaBO₂, 20 mol % NaCl, and 72 mol % Na₂WO₄; and E ₅: 655°C, 9 mol % NaBO₂, 53 mol % NaCl, and 38 mol % Na₂WO₄.     

Polymorphism in the Sc2Si2O7-Y2Si2O7 system

This paper examines the structural changes with temperature and composition in the Sc₂Si₂O₇-Y₂Si₂O₇ system; members of this system are expected to form in the intergranular region of Si₃N₄ and SiC structural ceramics when sintered with the aid of Y₂O₃ and Sc₂O₃ mixtures. A set of different compositions have been synthesized using the sol-gel method to obtain a xerogel, which has been calcined at temperatures between 1300 and 1750 °C during different times. The temperature-composition diagram of the system, obtained from powder XRD data, is dominated by the β-RE₂Si₂O₇ polymorph, with γ-RE₂Si₂O₇ and δ-RE₂Si₂O₇ showing very reduced stability fields. Isotherms at 1300 and 1600 °C have been analysed in detail to evaluate the solid solubility of the components. Although, the XRD data show a complete solid solubility of β-Sc₂Si₂O₇ in β-Y₂Si₂O₇ at 1300 °C, the ²⁹Si MAS-NMR spectra indicate a local structural change at x ca. 1.15 (Sc_2−xY_xSi₂O₇) related to the configuration of the Si tetrahedron, which does not affect the long-range order of the β-RE₂Si₂O₇ structure. Finally, it is interesting to note that, although Sc₂Si₂O₇ shows a unique stable polymorph (β), Sc³⁺ is able to replace Y³⁺ in γ-Y₂Si₂O₇ in the compositional range 1.86?x?2 (where x is Sc_2−xY_xSi₂O₇) as well as in δ-Y₂Si₂O₇ for compositions much closer to the pure Y₂Si₂O₇.     

Synthesis and characterization of inorganic solid electrolytes of Li2O-SiO2-P2O5 and Li2O-TiO2-SiO2-P2O5 systems

The lithium-ion-conducting inorganic solid electrolytes in the oxide systems Li₂O-SiO₂-P₂O₅ and Li₂O-TiO₂-SiO₂-P₂O₅ were prepared by the solid-state reaction, and the electrolyte pellet made by cold-pressing method had diameter of 13 mm and was about 1 mm thick. Phase identification and surface morphology of the products were carried out by X-ray diffraction and scanning electron microscopy. Ionic conductivity of the pellets was investigated through ac impedance. The results show that the adding of other cations can improve the ionic conductivity of the solid electrolyte, and the sintering temperature and duration can influence the ionic conductivity. The maximum ionic conductivity in the samples is 9.9 × 10⁻⁴ S/cm in the Li₂O-TiO₂-SiO₂-P₂O₅ system. Original Russian Text ? W. Li, M. Wang, Z.H. Li, X.F. Shang, H. Wang, Y.W. Wang, Y.B. Xu, 2007, published in Elektrokhimiya, 2007, Vol. 43, No. 11, pp. 1341–1345.     

(H2NC4H8NCH2CH2NH2)(HNCH2CH2NH2)3Zn2Ge2Se8: A new,templated one-dimensional ternary semiconductor stabilized by mixed organic cations

The novel, 1D semiconductor (H₂NC₄H₈NCH₂CH₂NH₂)(HNCH₂CH₂NH₂)₃Zn₂Ge₂Se₈ has been synthesized under solvothermal conditions using N-(2-aminoethyl)piperazine as solvent and templating agent at 200 °C. The material was characterized by single crystal and powder X-ray diffraction, IR and Raman spectroscopy and thermogravimetric analysis. The compound consists of 1D anionic [Zn₂Ge₂Se₈]⁴⁻ chains made of alternating edge-shared [ZnSe₄] and [GeSe₄] tetrahedra that charged balanced by one N-(2-aminoethyl)piperazinium and three piperazinium cations. The optical properties were investigated with solid state UV–Vis/near IR spectroscopy and the results show that the solid is a medium gap semiconductor with an absorption edge at 1.8 eV.     

Ag2Se-Tl2Se-Bi2Se3 quasi-ternary system

The Ag₂Se-Tl₂Se-Bi₂Se₃ quasi-ternary system (system A) was studied using DTA, X-ray powder diffraction, microstructure examination, and microhardness measurements. TlBiSe₂-AgBiSe₂, AgTlSe-AgBiSe₂, AgTlSe-Bi₂Se₃, and Tl₂Se-AgBiSe₂ polytherms, isothermal sections at 500 and 800 K, and liquidus surface projection of system A were constructed. System A is congruently triangulated into the following subordinate triangles: Tl₂Se-AgTlSe-Tl₉BiSe₆ (I), AgTlSe-Tl₉BiSe₆-TlBiSe₂ (II), Ag₂Se-AgTlSe-TlBiSe₂ (III), Ag₂Se-AgBiSe₂-TlBiSe₂ (IV), and AgBiSe₂-TlBiSe₂-Bi₂Se₃ (V). Subsystems I, III, and V are ternary systems with three-phase eutectic equilibrium; system II has a three-phase eutectic, and system IV is characterized by several invariant and monovariant peritectic and eutectic equilibria. Primary crystallization and homogeneity fields were outlined, and the types and coordinates of invariant and monovariant equilibria in system A were determined. A characteristic feature of the title system is an extensive field of solid solutions between high-temperature cubic AgBiSe₂ and TlBiSe₂ phases; this field lies as a continuous belt along the AgBiSe₂-TlBiSe₂ quasibinary section and covers about one-fourth of the surface area of the triangular diagram of system A.