单壁碳纳米管的轴向能带工程

单壁碳纳米管具有优异的电子学特性,是制备新一代高性能集成电路的重要材料.碳纳米管芯片之路存在诸多挑战,包括直径和手性的控制生长方法、金属性和半导体性单壁碳纳米管的分离方法、器件加工与集成方法等.这些课题从本质上讲大多属于化学问题,因此碳纳米管芯片研究为化学家们提供了新的机遇与挑战.过去10年来,我们围绕单壁碳纳米管的轴向能带工程这一研究思路,开展了一系列碳纳米管芯片的基础探索工作,发展了若干有效的单壁碳纳米管局域能带的调控方法,包括温度阶跃生长法、脉冲供料生长法、基底调控法以及形变调控法等.本文系统地阐述了这些局域能带调控方法,为使读者对该领域的研究进展有一个较为全面的了解,文中对其他课题组开展的代表性工作也给予了综述性介绍.     

单壁碳纳米管的结构修饰

由于单壁碳纳米管具有独特的结构、电学及机械等性能，可望在许多新领域得 到应用，已引起广泛的关注。但由于单壁碳纳米管不溶于水和常见的有机溶剂，极 大地制约了其应用性能的研究。随着单壁碳纳米管制备技术的不断完善，其研究方 向已开始转向结构修饰及应用性能的研究。主要介绍近年来单壁碳纳米管结构修饰 方面的最新发展状况，重点讨论化学功能化及物理吸附。     

不同结构碳纳米管的电磁波吸收性能研究

研究了单壁、多壁碳纳米管(聚团状、阵列状)以及未纯化与纯化后碳纳米管在2～18 GHz范围内的电磁波吸收性能. 通过测定不同结构碳纳米管粉体的介电常数以及磁导率, 得到损耗因子及衰减常数大小顺序为: 阵列状多壁碳纳米管>原生聚团状多壁碳纳米管>纯化聚团状多壁碳纳米管>原生单壁碳纳米管>纯化后单壁碳纳米管. 相比多壁碳纳米管, 单壁碳纳米管衰减常数随频率变化较小, 且具有较宽的吸收峰. 模拟计算和实验测试结果都表明, 碳纳米管/聚合物复合材料具有优良的电磁吸波性能.     

单壁碳纳米管的结构控制生长方法

单壁碳纳米管在原子尺度的结构变化即可导致其电学、光学方面等性质的多样性和非连续的变化——如电学性质上可呈现半导体性或金属性。然而,在单壁碳纳米管表现出诸多优异性能的同时,如何实现碳纳米管的结构控制制备仍面临严峻的挑战。本文以单壁碳纳米管的管径、导电属性和手性控制为目标,介绍单壁碳纳米管的结构控制生长方法,主要包括温度扰动法、金属催化剂结构设计法、生长气氛调控法、外场辅助法、基底诱导法、非金属粒子催化法和sp2碳结构模板法等。并在此基础上总结了单壁碳纳米管结构控制生长的基本思路及实现途径,以期为后续单壁碳纳米管的规模化应用奠定基础。     

碳纳米管的还原反应

用硝酸和硫酸的混合物对单壁碳纳米管进行切割,然后用SOCl2将切割后碳纳米管上的羧基转变为酰氯,以LiAIH4作为还原剂,对单壁碳纳米管进行了还原,并用FT-IR,Raman,XPS对还原后的单壁碳纳米管进行了结构表征.     

在不同激发波长下的单壁碳纳米管的拉曼光谱研究

采用直流电弧法制备单壁碳纳米管样品,用457.5和632.8nm两种不同的激发光分别测得单壁碳纳米管的正常拉曼光谱和共振拉曼光谱.通过理论分析得到了单壁碳纳米管的直径分布,进一步推测了其类型及结构参数;对单壁碳纳米管的正切拉伸模的成分进行了归属.在632.8nm激发波长下得到了IG/ID值随激光功率变化的曲线,认为在2.5mW时,单壁碳纳米管缺陷的结构可能发生了改变.在用457.5nm波长激发的单壁碳纳米管的拉曼光谱中,首次发现了1421cm-1的拉曼谱峰.     

基于溶液法的单壁碳纳米管手性分离

本文综述了基于溶液法分离策略,利用表面活性剂、生物分子、共轭聚合物分子在溶液中分散或选择性分散单壁碳纳米管(SWCNTs),结合各种分离技术获得单一手性SWCNTs的研究进展.阐述了不同体系中SWCNTs手性分离的原理,综合比较了不同分离技术的优缺点.单一手性SWCNTs分离技术的不断进展有助于推动单壁碳纳米管的进一步研究与应用.     

碳纳米管基气体传感器研究进展

碳纳米管具有灵敏度高、响应快和工作温度低等优异的气敏特性,近年来碳纳米管基气体传感器的研究成为研究热点.概述了碳纳米管基气体传感器的种类、结构特点、气敏性能和未来的发展方向,着重介绍了纯的碳纳米管包括单壁碳纳米管、多壁碳纳米管和碳纳米管阵列的气敏特性,以及碳纳米管的修饰或碳纳米管与高分子材料、氧化物等复合对其气敏性能的影响.     

单壁碳纳米管的控制生长与生长动力学

正结构决定性能,作为典型一维碳材料的单壁碳纳米管具有非常独特的光电性质,因而,单壁碳纳米管的结构控制制备一直是人们关注的热点问题,也成为该领域最具挑战的课题之一~(1,2)。目前,化学气相沉积方法是可控制备碳纳米管的主要方法,在化学气相沉积反应过程中,碳源在催化剂表面裂解成核,进而生长出结构不同、长度各异的单壁碳纳米管。为深入探索碳纳米管的生     

接枝羧基对单壁碳纳米管弹性性质的影响

采用分子动力学方法对端口接枝不同数量羧基的扶手椅型和锯齿型单壁碳纳米管弹性模量进行了模拟研究. 结果表明, 扶手椅型(5, 5)、(10, 10)管和锯齿型(9, 0)、(18, 0)管在未接枝状态下杨氏模量分别为948、901GPa和804、860 GPa. 在接枝2-8个羧基情况下, 扶手椅型单壁碳纳米管拉伸杨氏模量基本不随接枝数量的增加而发生变化, 而锯齿型单壁碳纳米管则不同, 接枝状态下的弹性模量比未接枝状态小很多, 但随接枝数量的增加又呈略增趋势. 分别从接枝后碳纳米管变形电子密度等值线结构变化、键长变化和系统势能变化规律等方面, 对单壁碳纳米管弹性模量的接枝效应进行了分析.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.