表面活性剂控制的硒纳米线的室温生长

以表面活性剂十二烷基硫酸钠(SDS)为形貌导向剂,利用Na₂Se在室温碱性水溶液中的自发氧化,成功制备了Se纳米线。用TEM、SEM、EDX、XRD、HRTEM、SEAD等手段表征了Se纳米线的组成和结构。结果表明,合成的Se纳米线是沿六方相Se的[001]轴方向生长,具有良好的晶型结构。使用TEM对不同时间Se纳米结构的生长过程的形貌进行了跟踪,探讨了Se纳米线的形成机理,发现其形成与生长过程符合“solid-solution-solid”机理。同时,选择了具有特异官能团(如-OH,-COOH,-CONH₂)的3种表面活性剂,研究它们在纳米硒的取向性生长中的导向作用,只有SDS能引导合成出高质量的Se纳米线。     

Large thermoelectric figure of merit in hexagonal phase of 2D selenium and tellurium

We found a large thermoelectric figure of merit in the hexagonal phase of 2D selenium and tellurium from first-principles calculations. The hexagonal phase (α) is obtained from three atomic layers truncated along the [001] direction of trigonal Te and Se bulk in the equilibrium structure. We found the α-Se structure dynamically stable. The calculated electronic structures of α-Se and α-Te show interesting semiconductor character for both electronic and optoelectronic applications. Furthermore, the obtained elastic properties show that hexagonal tellurene is a softer material than selenene. The thermoelectric figure of merit for hexagonal 2D phase (∼1.0) is larger than those reported for the tetragonal 2D phase (∼0.75) of selenium and tellurium. Additionally, the computed electrical and phonon transport parameters indicate that selenene and tellurene are promising thermoelectric materials; both offer an alternative to recovering residual heat and transforming it into electricity.     

Controlled synthesis of tuned bandgap nanodimensional alloys of PbS(x)Se(1-x)

Truly alloyed PbS(x)Se(1-x) (x = 0-1) nanocrystals (～5 nm in size) have been prepared, and their resulting optical properties are red-shifted systematically as the sulfur content of the materials increases. Their optical properties are discussed using a modified Vegard's approach and the bowing parameter for these nanoalloys is reported for the first time. The alloyed structure of the nanocrystals is supported by the energy-filtered transmission electron microscope images of the samples, which show a homogeneous distribution of sulfur and selenium within the nanocrystals. X-ray photoelectron spectroscopy studies on ligand-exchanged nanocrystals confirmed the expected stoichiometry and various oxidized species.     

Band-gap engineering of semiconductor nanowires through composition modulation

Alloyed ternary CdS(1-x)Se(x) nanowires were synthesized by template-assisted electrodeposition, in which the ratio of S to Se in the nanowires was controlled by adjusting the relative amounts of the starting materials. Higher-resolution transmission electron microscopy (HRTEM) and X-ray diffraction (XRD) showed that the alloyed ternary CdS(1-x)Se(x) nanowires are highly crystalline, and no phase-separated Cd was observed in these nanowires. Optical measurements indicated that the band-gap engineering can be realized in these CdS(1-x)Se(x) nanowires through modulating the composition of S and Se. With broadly tunable optical and electrical properties, these alloyed nanowires could be used in color-tuned nanolasers, biological labels, and nanoelectronics.     

A complete set of self‐consistent charge density‐functional tight‐binding parametrization of zinc chalcogenides (ZnX; X=O,S, Se,and Te)

We have developed a complete set of self‐consistent charge density‐functional tight‐binding parameters for Zn? X (X = Zn, O, S, Se, Te, Cd, H, C, and N). The transferability of the derived parameters has been tested against Pseudo Potential‐Perdew, Burke and Ernzerhof (PP‐PBE) calculations and experimental values (whenever available) for corresponding bulk systems (e.g., hexagonal close packing, zinc‐blende, and wurtzite(wz)), various kinds of nanostructures (such as nanowires, surfaces, and nanoclusters), and also some small molecular systems. Our results show that the derived parameters reproduce the structural and energetic properties of the above‐mentioned systems very well. With the derived parameter set, one can study zinc‐chalcogenide nanostructures of relatively large size which was otherwise prohibited by other methods. The Zn‐Cd parametrization developed in this article will help in studying large semiconductor hetero‐nanostructures of Zn and Cd chalcogenides such as ZnX/CdX core/shell nanoparticles, nanotubes, nanowires, and nanoalloys. © 2012 Wiley Periodicals, Inc.     

Magnetic Co3O4 nanowires,preparation and properties

The Co₃O₄ nanowires have been successfully synthesized via modified template method.The as-prepared products have been characterized by EDS,TEM and HRTEM analysis.The magnetic behavior of it is investigated by a magnetic property measurement system.The nanowires exhibit some novel magnetic properties,which are different from its bulk material.The temperature dependence curves of magnetization in zero-field-cooling and field-cooling exhibit two peaks of antiferromagnetic at blocking temperature of～23 K and～31 K,respectively.The field dependent M（H） curves of the Co₃O₄ nanowires at T = 5 and 300 K both exhibit PM properties.Moreover,the diameter of nanowires is hence determined according to the finite size effect as approximately 7-11 nm,in consistent with the characterizations by HRTEM.     

Characterization and field emission properties of ZnMgO nanowires fabricated by thermal evaporation process

In this paper, we investigate the roles of gold catalyst using modified thermal evaporation set-up in the growth process of ZnMgO nanowires. ZnMgO nanowires are fabricated on silicon substrates using different thickness of gold catalyst. A simple horizontal double-tube system along with chemical vapor diffusion of the precursors, based on Fick’s first law, is used to grow the ZnMgO nanowires. Field emission scanning electron microscopy images show that the ZnMgO nanowires are tapered. The optical properties of the ZnMgO nanowires are characterized by room temperature photoluminescence (PL) measurements. The PL studies demonstrate that the ZnMgO nanowires grown using this method have good crystallinity with excellent optical properties and have a larger band-gap in comparison to the pure ZnO nanowires. Field emission characterization shows that the turn-on field for the nanowires grown on the thinner gold film is lower than those grown on the thicker gold film.     

Chemical synthesis, structural characterization, optical properties, and photocatalytic activity of ultrathin ZnSe nanorods

Ultrathin ZnSe nanorods in the cubic phase have been synthesized by the reaction of selenium and zinc oleate for 30 min at 240 °C. These nanorods showed an average diameter of 2.4 nm, which is much smaller than the Bohr size of bulk ZnSe. Thus, they exhibited a remarkable quantum size effect in terms of their optical properties. The formation of the ultrathin nanorods could be attributed to the oriented attachment mechanism, which was supported by the structure of the nanorods and the control experiments. The ultrathin nanorods were transferred into an aqueous solution by ligand exchange. The performance of these nanorods as a catalyst was examined, using the photodegradation of methyl orange as a model reaction. It was found that the ultrathin nanorods possessed better photocatalytic activities than conventional ones.     

Solution-phase synthesis and electrochemical hydrogen storage of ultra-long single-crystal selenium submicrotubes

Ultra-long single-crystalline trigonal selenium submicrotubes were synthesized using a facile one-step solution-phase approach with the assistance of nonionic surfactant Polyoxyethylene(20)sorbitan monolaurate (Tween-20), which turned out to be significant for the formation of ultra-long Se submicrotubes. XRD, Raman, SEM, and TEM were adopted to characterize the morphology, structure and phase composition of the as-prepared Se products. It was found that the length of the obtained Se submicrotubes was over 100 microm. By variation of the experimental parameters, the t-Se spheres, nanowires, and broken microtubes can be prepared. The possible growth mechanism of the ultra-long selenium submicrotubes was explained. In addition, we have also demonstrated that the synthesized ultra-long t-Se submicrotubes using the Tween-20-assisted approach can electrochemically charge and discharge with the high capacity of 265 mAh/g (corresponding to 0.97 wt % hydrogen in SWNTs) under normal atmosphere at room temperature. Cyclic voltammetry was adopted to investigate the adsorption-oxidation behavior of ultra-long selenium submicrotubes. It was observed that the morphology of the synthesized selenium products had a remarkable influence on their capacity of electrochemical hydrogen storage. These differences in hydrogen storage capacity are likely due to the size and density of tubes as well as the microcosmic morphology of different Se samples. The as-obtained ultra-long Se submicrotubes are expected to find wide applications in hydrogen storage, high-energy batteries, and optoelectronic, biologic, and catalytic fields as well as in the studies of structure-property relationships. This simple Tween-assisted approach might be extended to the preparations of one-dimensional nanostructures of tellurium and other anisotropic materials.     

Nano- and heterostructures of magnetic semiconductors for spintronics

The magnetic, electron transport, and optical properties of ordered nano- and heterostructures of Group III–V and Group IV diluted magnetic semiconductors are studied. A comparative analysis of the magnetic and electron transport properties of nanowires, thin films, and bulk semiconductors doped with transition metals is carried out. The size effect on the spin dynamics, magnetic properties, and magnetoresistance is discussed. Prospects for application of nano- and heterostructures with combined magnetic, electrical, and optical properties are considered.     

溶剂交换法制备一维有机纳米材料

利用溶剂交换法制备了几种有机小分子化合物的一维纳米材料,并分别用SEM、TEM、XRD等对其结构进行了表征.分析了纳米材料的生长过程,讨论了有关的机理,并研究了其吸收光谱和荧光光谱等光物理行为.结果显示,有机纳米结构的形貌和尺寸对分子聚集体的光谱性质具有调制作用,使得它们展示出不同于溶液和体材料的优良纳米特性.     

From (Cd2Se2)(pa) (pa=propylamine) hybrid precursors to various CdSe nanostructures: structural evolution and optical properties

Nanostructural evolution of II-VI semiconductors emerges as a hot research field because it offers a novel route for the synthesis of functional semiconductor nanomaterials. Here, we report a "top-down" process of structural evolution from two dimensional Cd(2)Se(2)(pa) hybrid structures to zero- or one- dimensional CdSe nanostructures. We firstly synthesized the Cd(2)Se(2)(pa) hybrid by a facile solvothermal reaction and determined the hybrid crystal structure through the Rietveld refinement based on the PXRD data. The (Cd(2)Se(2))(pa) hybrid consists of [Cd(2)Se(2)] slabs sandwiched by coordinated n-propylamine layers. Then, we used this hybrid as a precursor to explore the "top-down" fabrication process of structural evolution from two dimensional layered structures to zero- or one- dimensional nanocrystals. It has been shown that various CdSe nanostructures including lamellar structures, nanoparticles, nanowires, and nanorods can be obtained through the pyrolysis of (Cd(2)Se(2))(pa) hybrid precursor under different conditions. It is worth mentioning that the oriented attachment of nanoparticles has been observed during the pyrolysis process. Additionally, the variation of optical properties with structural evolution has been investigated in detail.     

Hollow nanostructures of platinum with controllable dimensions can be synthesized by templating against selenium nanowires and colloids

Hollow nanostructures of platinum have been synthesized by reducing PtCl2 with alcohol in the presence of selenium nanowires or colloids. The Se template could be removed by soaking the resultant Se@Pt nanostructures in hydrazine or by heating them to 200-250 degrees C. The size and wall thickness of the polycrystalline hollow nanostructures could be controlled by varying the template, reaction time, and the concentration of PtCl2.     

Theoretical investigation of the structural,elastic, electronic and optical properties of the ternary indium sulfide layered structures AInS2 (A = K,Rb and Cs)

Ab initio calculations were performed to investigate the structural, elastic, electronic and optical properties of the ternary layered systems AInS₂ (A = K, Rb and Cs). The calculated structural parameters are in good agreement with the existing experimental data. Analysis of the electronic band structure shows that the three studied materials are direct band-gap semiconductors. Density of states, charge transfers and charge density distribution maps were computed and analyzed. Numerical estimations of the elastic moduli and their related properties for single-crystal and polycrystalline aggregates were predicted. The optical properties were calculated for incident radiation polarized along the [100], [010] and [001] crystallographic directions. The studied materials exhibit a noticeable anisotropic behaviour in the elastic and optical properties, which is expected due to the symmetry and the layered nature of these compounds.     

Homogeneously alloyed CdSxSe1-x nanocrystals: synthesis, characterization, and composition/size-dependent band gap

Alloy nanocrystals provide an additional degree of freedom in selecting desirable properties for nanoscale engineering because their physical and optical properties depend on both size and composition. We report the pyrolytic synthesis of homogeneously alloyed CdS(x)Se(1-x) nanocrystals in all proportions. The nanocrystals are characterized using UV-visible absorption spectroscopy, transmission electron microscopy, X-ray diffractrometry, and Rutherford backscattering spectrometry to determine precisely structure, size, and composition. The dependence of band gap on nanocrystal size and composition is elucidated, yielding a bowing constant of 0.29, in agreement with bulk values. In addition, the morphology of the resultant nanocrystals can be altered by changing the reaction conditions, generating structures ranging from homogeneous, spherical nanocrystals to one-dimensional gradient nanorods.     

Size Effect of Colloidal Selenium Particles on the Inhibition of LPS‐Induced Nitric Oxide Production

We have studied the size‐dependent inhibition capabilities of colloidal selenium (Se) particles on lipopolysaccharide (LPS)‐induced nitric oxide (NO) production in RAW 264.7 cells. Four particle sizes of the nano‐Se, ranging from 45 ? 220 nm in diameter, were examined. All of them, unlike their bulk material, show clear capabilities of inhibition and a trend dependent on the particles size. The inhibition becomes more potent as the particle size increases. It indicates that pursuing the reduction of colloidal sizes into nanoscale is not favoured in this biological system.     

Synthesis and characterization of an open framework ballium selenide: Ga4Se7(en)2 x (enH)2

An open framework gallium selenide, Ga(4)Se(7)(en)(2).(enH)(2), has been prepared by the direct reaction of gallium (Ga) and selenium (Se) in ethylenediamine (en), in which both covalent and hydrogen bonds have been employed to combine the inorganic structures and organic spacers to build layers with micropores. Its structure has been determined by X-ray diffraction. Its thermal and optical properties have been characterized by TGA and UV-vis, Raman, and IR spectroscopies, respectively.     

Structure and spectral-optical characteristics of Se,Se/CdS,and Se/Cd<Subscript>0.5</Subscript>Zn<Subscript>0.5</Subscript>S nanoparticles,stabilized in polymer-containing media

A method was proposed for the production of colloidal nanoparticles of selenium stabilized by polymers and surfactants, and their structural and optical characteristics were studied. It was shown that during the deposition of CdS and Cd_0.5Zn_0.5S on the surface of the Se nanoparticles followed by dissolution of the selenium with sodium sulfite it is possible to obtain network “nanoframeworks” with size 30–50 nm, formed by CdS or Cd_0.5Zn_0.5S particles measuring 3–5 nm. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 43, No. 1, pp. 24–29, January–February, 2007.     

Structural,elastic, electronic and optical properties of the cubic perovskite BiAlO3

We report first-principles study of structural, elastic, electronic and optical properties of the cubic perovskite-type BiAlO₃ using the pseudopotential plane waves method within the local density approximation. The calculated structural parameters are in good agreement with previous calculations. The elastic constants and their pressure dependence are calculated using the static finite strain technique. A linear pressure dependence of the elastic stiffness is found. Band structures show that BiAlO₃ has an indirect band gap between the occupied O 2p and unoccupied Bi 6p states. The density of states and Mulliken charge populations analysis shows that Al–O and Bi–O bonds are covalent with a strong hybridization. The variation of the gap versus pressure is well fitted to a quadratic function and an indirect to direct band gap transition occurs at 15.5 GPa. Furthermore, in order to understand the optical properties of BiAlO₃, the dielectric function, absorption coefficient, refractive index, extinction coefficient, optical reflectivity and electron energy loss are calculated for radiation up to 30 eV.